Platform penyimpanan

300 m², Traglast: 350 kg/m² Lichte Höhe: 3,0m | Raster: 5,0 x 6,0

Tahun pembuatan: 2021, Kondisi: diremajakan ulang (bekas), - Luas filtrasi: 130 m² - Modul keramik - Porositas: 0,2 mikron (standar) Kapasitas: - Anggur putih: 7.000 – 10.000 L/jam Dodpfxsv Nirio Abhjun - Anggur merah: 5.000 – 8.000 L/jam - Jus anggur: 4.000 – 5.000 L/jam - Jus buah: 4.500 – 6.500 L/jam - Filter direkondisi pabrik - Garansi 12 bulan untuk semua komponen mekanik - Mesin dalam kondisi seperti baru

Tahun pembuatan: 1977, Kondisi: diremajakan ulang (bekas), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Dodpod N Rb Dofx Abheun Swivel heads. Drilling heads on each side at the front included. Very good condition. Available immediately.

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Dsdpfx Aod N H A Nsbhjun Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition

Kondisi: bekas, CNC cycle-controlled lathe HARRISON Alpha 400 Plus Machine No. P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Swing in gap: 585 mm Bed width: 313 mm Cross travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock quill taper: MT 5 Spindle bore: 54 mm Spindle nose size: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed range (Step 1): 15-275 rpm Spindle speed range (Step 2): 35-795 rpm Spindle speed range (Step 3): 110-2500 rpm Feed rate X and Z: 0.03 - 0.6 mm/rev. Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 V, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC – language in French (France) Duedpsh Hvk Aofx Abhon - Automatic gearbox range switching in 3 steps (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with various scaling factors (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX quick-change toolpost size B with 2 holders - 1 live center - 1 quick-release drill chuck RÖHM, 3-16 mm - Hinged chuck guard - Hinged work area safety doors - Chip tray with coolant device under the machine bed - Control cabinet attached to the machine - RS 232 interface Required floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg good condition

Kondisi: baru, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe/-dicke: 2–150 mm Polierwalzendrehzahl: frequenzgeregelt Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtanschlussleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Queraggregatmotor: 1,5 kW × 1 Schraubenwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 2,2 kW Motor für Auf-/Abbewegung: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Arbeitstisch höhenverstellbar: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Gewicht: 4200 kg Duedpfxsdmi Nij Abhen

Kondisi: baru, Saw blade diameter: 370 mm Dsdpfxed Iin He Abheun Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Kondisi: baru, es Duodpfjdy Hm Dsx Abhjn

Kondisi: bekas, Tahun pembuatan: 2018, en_overview_The Gruber AFD6 is a bottle and party keg filling machine, manufactured in 2018 by the German company Gruber, with a total of 725 operating hours. The machine is available immediately. Technical Details - Output: 800 bottles/hour (0.33l) - 750 bottles/hour (0.5l) - 600 bottles/hour (1.0l) - 400 bottles/hour (2.0l) - 240 bottles/hour (5.0l party keg) Actual output may vary depending on CO2 content and beer temperature (practically, up to 1,000 bottles/hour with 0.33l bottles have been achieved). - Long-tube filler with 6 filling stations - Fully automated filling process Dusdsu I Hr Uopfx Abhjn - Single or double CO2 flushing - Siemens S7 control system with touch panel - Operating hours: 725 h

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Max. press force: 1000 kN, max. working length: 3100 mm, throat depth: 250 mm, connected load: 18 kW, weight: 9.5 t, operating hours: 76,566 h, supplied with accessories and documentation, regularly serviced. Dujdslzizmspfx Abhsn

Kondisi: baru, Thread diameter M3 - M8 mm Electric tapping machines for M3 - M8 threads, Adjustable angle. 5 quick-change chucks with slip clutch included. Via display adjustable: Dsdpfx Ajfg U Snobhsun Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional: - Clamping table with T-slots: 990x700x800mm. - Magnetic base.