Nextform

Kondisi: bekas, nomor mesin/kendaraan: 007842, arbeitsbereich-achse-x-5000-mm-arbeitsbereich-achse-y-1200-mm-ar beitsebene-mit-vakuum-konsolenauflagen-leistung-haupt-spindel-18- kw-anz-kontrollierte-achsen-4-achsen-maximale-kantenhoehe-64-mm-a nzahl-bohrspindeln-14-anzahl-werkzeugplaetze-18 Dedpfjyhbiusx Abhscc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, TECHNICAL DETAILS Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm - max. 80 mm Workpiece stacking: max. 2 pieces Vertical Drilling Unit 2V21 HIGH SPEED 7500 Feed stroke (Z-axis): 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counter-clockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 35 mm Spindle distance: 32 mm Spindle type: individually controllable Horizontal Drilling Unit 2H4X/1Y 4 drilling spindles each: X-axis each 1 drilling spindle: Y-axis Drilling depth: max. 38 mm Drilling height (Z-axis): 38 mm from workpiece top edge Rotation direction: clockwise/counter-clockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 20 mm Spindle type: individually controllable Grooving Saw Unit N2 X-Y 90° Cutting depth: 30 mm Machining cross-section: max. 70 mm² Speed: 1,500 - 7,500 rpm, frequency controlled Tool diameter: 125 mm Dcsdpfx Abjyg E R Hohjc Saw blade thickness: max. 5 mm Milling Unit F2-ETP-6 kW Tool holder: for shank diameter d = 25 mm Max. tool diameter: 60 mm Clamping length: min. 65 mm / max. 95 mm Tool weight: max. 2.5 kg Tool change: manual, hydro quick-release system ETP 25 Rotation direction: clockwise/counter-clockwise Speed: 6,000 - 18,000 rpm, steplessly programmable Drive: frequency-controlled three-phase motor Max. power at tool: up to 5/6 kW in continuous/intermittent operation (S1/S6-50%) EQUIPMENT Material feed “IgeL-ROBOT” Bottom processing support Top processing support Vertical drilling unit 2 V 21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90 Milling unit F2-ETP-6 KW Barcode reader, manufacturer: Datalogic

Kondisi: bekas, nomor mesin/kendaraan: 007841, arbeitsbereich_achse_x-arbeitsbereich_achse_y-arbeitsebene-leist ung_haupt_spindel-anz_kontrollierte_achsen-maximale_kantenhohe-an zahl_werkzeugplatze Dsdpsyg Ef Dsfx Abhecc

Kondisi: bekas, Tahun pembuatan: 2012, available by appointment Machine design: fixed gantry machine Machining size in X-direction: 3548 mm Machining size in Y-direction: 1350 mm Machining thickness (Z-axis): 160 mm Number of main spindles: 1 unit Dcjdpfsygm Dhjx Abhjc Main spindle power: 11 kW Main spindle speed: 1,200–20,000 rpm Clamping system: HSK-63 F Spindle cooling: liquid cooling Number of axes: 5 Tool changer: disc-type changer Tool change positions: 12 units Rear wall groove units: yes Vertical drilling spindles - X-direction: 10 units Vertical drilling spindles - Y-direction: 8 units Spindle speed, vertical drilling spindle: 6,000 rpm Horizontal drilling spindle in X-direction: 2+2 units Horizontal drilling spindle in Y-direction: 2+2 units Spindle speed, horizontal drilling spindle: 6,000 rpm Control type: PC control Operating system: Windows Typewriter keyboard: yes Mouse: yes Programming system: Xilog DXF interface: yes CD-ROM drive: yes Table design: console table, tubeless Stop system: stop cylinders for veneer Support arms: 6 units Suction cups: 18 units Lifting rails: 4 units Number of vacuum pumps: 1 unit Vacuum pump capacity: 250 m³/h Field changeover: yes Safety fence left: yes Safety fence right: yes Safety fence rear: yes Extraction hood: axis-controlled Setup aid: point laser setup aid Safety device: bumper Central lubrication: automatic Tools: available at extra cost Approx. weight: 6,500 kg Extraction diameter: 200 mm Further descriptions and photos upon request Storage location:

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, jangkauan kerja: 400 mm, panjang total: 23.000 mm, lebar total: 4.500 mm, tinggi total: 2.700 mm, diameter mata gergaji: 700 mm, tinggi benda kerja (maks.): 240 mm, jenis arus masuk: tiga fasa, lebar yang dibutuhkan: 5.500 mm, persyaratan ruang panjang: 250.000 mm, berat keseluruhan: 16.000 kg, lebar kerja: 400 mm, Hundegger P10 Masih berfungsi dengan baik Masih dalam penggunaan Pengaturan/transfer data telah diperbarui melalui USB Gergaji 2 x pisau freis cakram 1 x pisau freis jari 1 x pisau freis kerv 3 x mesin freis rantai 4 x unit bor Dcjdpfx Aoygdibobhjc 2 x unit penanda 1 x sistem kemiringan

Kondisi: bekas, Tahun pembuatan: 2018, panjang total: 1.750 mm, lebar total: 1.800 mm, tinggi total: 1.800 mm, de-hu-01 Dcodpeyf Hc Iefx Abhjc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Pusat kerja CNC Homag Drillteq V-200 Area kerja X: 3.050 mm Area kerja Y: 850 mm Area kerja Z: 60 mm 1 spindle milling Penukar alat dengan 4 posisi, dudukan HSK-F63 Kepala bor vertikal: 13 Mata bor horizontal X: 4 Mata bor horizontal Y: 2 Dsdpfsyf Hamex Abhecc Pisau alur di X Penjepit morse clamp gripper HOMAG ecoPlus Kontrol HOMAG POWER CONTROL Pendingin panel listrik Mesin dalam kondisi sangat baik

Kondisi: sangat baik (bekas), Pusat kerja Alberti lengkap dengan: - 2 unit pantograf - penukar alat 6 posisi - unit pisau Dcedpfxjyf D U Us Abhec - 25 mata bor vertikal - 2 + 2 mata bor horizontal - 1 + 1 mata bor horizontal

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, R0.07.35 morbidelli cx110 Dcjdpfxeyfw Tqj Abhoc 1x 52.46.73 Kepala bor F23L RO.AX 1x 52.41.14 Kepala bor dengan inverter 1x 52.43.47 Elektospindel HSK63F 7,5kW 24000 rpm 1x 52.46.75 Penukar alat 6 posisi 1x 52.38.35 Kepala HSK63F untuk engsel offset 48, 6 1x 52.46.76 Kepala vertikal pisau gergaji/Lamello 1x 52.46.77 Kepala HITECO HSK 63F – 1 keluaran horizontal untuk router 1x 52.43.50 Conveyor balik untuk benda X

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, daya motor spindle: 9.000 W, arus masuk: 55 A, lebar meja: 1.390 mm, panjang meja: 4.000 mm, tinggi kerja: 110 mm, tekanan udara: 7 batang, berat keseluruhan: 3.100 kg, de Djdpfxjyft A Io Abhecc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-250-12-2554, tinggi benda kerja (maks.): 80 mm, panjang benda kerja (maks.): 1.000 mm, lebar benda kerja (maks.): 3.000 mm, model controller: PC 85, technical-details-001 Dcjdeydnu Nepfx Abhsc

Kondisi: bekas, Tahun pembuatan: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 – Drilling and Milling Made for You! This numerically controlled machining center is equipped with a wide range of accessories for milling and drilling to meet every woodworking requirement. Highly efficient – featuring drilling spindles with 8,000 rpm and industry-leading technology, the most robust spindle available on the market, with more than 1,000 maintenance-free cycles. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to tailor the machine precisely to your needs. Effortless and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. Easy to operate, with a lowered machine frame providing full access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural safety measures are required. Support Structure: The supporting structure features a particularly sturdy monolithic steel base, ribbed and highly robust. The extra-wide support surface is specifically designed to provide the machine with exceptional stability, ensuring consistent precision under all working conditions. Floor anchoring of the machine is not required. The base provides a large, solid mounting for the movable gantry: the working unit is fitted with a balanced, stable, and resilient support that withstands the highest stresses, resulting in superior workmanship and greater accuracy. The moving gantry consists of a single, solid piece anchored to the base and glides along high-grade prismatic guides with recirculating ball shoes. The working unit is attached and also moves along the Y and Z axes via prismatic guides with ball shoes. Dcjdpfx Asydmg Dsbhsc Movement of the lower moving unit (X-axis) and the working unit across the traverse of the gantry (Y-axis) is accomplished via helical rack-and-pinion drives, resulting in increased force per tooth for greater acceleration and higher travel speeds along the X and Y axes. The specially designed helical gearing ensures minimal wear of mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, providing perfect balance under dynamic loads and withstanding strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, ensuring high-quality finishing operations and eliminating vibration. X-Y-Z axis movements are driven by brushless motors powered by static inverters, offering: - Reduced processing times thanks to improved acceleration - Higher positioning accuracy thanks to high-resolution encoders - No set-up activities upon machine start-up due to absolute encoders - No general maintenance required as the brushless system is brush-free Axis movement and general operation management is performed by...

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi kerja: 60 mm, lebar kerja: 850 mm, model controller: POWER PC 85 + WOODWOP 6.0, panjang kerja: 3.050 mm, DETAIL TEKNIS Dodpfxjydmcro Abhscc Dimensi kerja: 3.050 x 850 mm Tinggi kerja: 12 - 60 mm Kepala bor Spindel vertikal sumbu X: 8 Spindel vertikal sumbu Y: 5 Spindel horizontal sumbu X: 4 Spindel horizontal sumbu Y: 2 Kepala frais Sumbu: 3 Penggantian alat: Otomatis Diameter unit gergaji terintegrasi: 100 mm DETAIL MESIN Kontrol: POWER PC 85 + WOODWOP 6.0 (diperbarui pada 2023) PERLENGKAPAN Penggantian alat 4 posisi otomatis

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 50 kg, tinggi kerja: 80 mm, lebar kerja: 1.300 mm, panjang kerja: 2.500 mm, TECHNICAL DETAILS Working length: 300 - 2,500 mm Working width: 60 - 1,300 mm Working height: 10 - 80 mm Maximum workpiece weight: 50 kg MACHINE DETAILS Height operation: Up to 1,300 mm Size tolerance readability: ±0.15 mm Tool change: NC-controlled Programming: PC - TPA Albatros software Operating system: Windows 7 Professional EQUIPMENT Processing on 6 sides of the panel Double-cut chain – X-axis patent Linear, circular, and spiral interpolation Double zero point reading Mirror program management Optimizer for turret tool diameter Optimizer for independent spindle diameter DXF file conversion (geometric conversion) Import of work lists in ASCII format Additional key for office-based programming Gun barcode reader 17-inch LCD monitor Panel feeding and handling via motorized vertical comb transfer with rollers Height reading system with independent axis Djdpsydlk Ijfx Abhscc Thickness measurement system with mechanical probe Brushless motors with programmable NC speed control Drilling unit with independent vertical and horizontal spindles Upper turret milling unit with 10 positions Automatic lubrication 180° panel transfer and rotation system Unloading system with motorized conveyor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, en-GB Dcsdpoydlapofx Abhoc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 55595, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 60 mm, berat keseluruhan: 3.000 kg, model controller: Xp 600, RINCIAN TEKNIS Area kerja sumbu X: 3.000 mm Area kerja sumbu Y: 1.000 mm Area kerja sumbu Z: 60 mm RINCIAN MESIN Kontrol: Xp 600 dengan perangkat lunak Biesse Works Berat: 3.000 kg PERLENGKAPAN Sistem pemuatan otomatis dengan konveyor sabuk bermotor 2 penjepit untuk mengunci dan mengangkut panel Dcjdpoydk Rmofx Abhjc 1+1 spindle elektrik vertikal (bawah + atas) dengan 3 sumbu 1+1 gergaji independen (bawah + atas) 29 + 29 spindle independen untuk pengeboran vertikal pada arah X dan Y (bawah + atas) 10 + 10 spindle independen untuk pengeboran horizontal pada arah X dan Y (bawah + atas) Sistem pengeluaran otomatis dengan konveyor sabuk bermotor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 01-2142-054, jarak pergerakan sumbu X: 4.200 mm, jarak lintasan sumbu Y: 2.100 mm, RINCIAN TEKNIS Perjalanan sumbu X: 4.200 mm Perjalanan sumbu Y: 2.100 mm RINCIAN MESIN Spindel listrik vertikal: 9 kW Kapasitas penukar alat: 6 posisi PERLENGKAPAN Meja kerja nesting Sistem kontrol numerik berbasis PC Perangkat lunak antarmuka pengguna ALPHCAM Perangkat lunak Alphabet untuk nesting Dcsdpfx Abjydi Nuohoc Sistem pemuatan otomatis dengan konveyor bermotor Sistem pencetakan dan aplikasi label dengan pelabel Pagar pelindung keliling Sistem keselamatan dengan bantalan pengaman depan Sistem pelumasan otomatis AC untuk pendinginan dan pembersihan kontrol mesin

Kondisi: belum diuji (bekas), Tahun pembuatan: 2009, jam operasional: 6.000 h, Fungsionalitas: belum diuji, kecepatan pemakanan sumbu X: 80 m/menit, jarak pergerakan sumbu X: 3.550 mm, jarak lintasan sumbu Y: 1.680 mm, jarak gerak sumbu Z: 275 mm, kecepatan spindel (maks.): 24.000 rpm, TECHNICAL DETAILS Travel Range X-Axis: 3,550 mm Dedpfx Abjyc Smgohocc Travel Range Y-Axis: 1,680 mm Travel Range Z-Axis: 275 mm Main Spindle Max. Speed: 24,000 rpm Working Area X-Axis: 3,060 mm Working Area Y-Axis: 1,210 mm Working Area Z-Axis: 100 mm Rapid Traverse X: 80 m/min Rapid Traverse Y: 80 m/min Rapid Traverse Z: 25 m/min MACHINE DETAILS Dimensions & Weight Installation Dimensions (L x W x H): 5,900 x 4,020 x 2,340 mm Weight: approx. 3,350 kg Extraction Port Diameter: 200 mm Operating Hours: approx. 6,000 h EQUIPMENT Linear tool changer with 8 positions, travelling with the gantry Lateral pick-up station for 2 tools Travelling pick-up station for unit/tool HSK F63 14 vertical drilling spindles (9 in X and 5 in Y direction) 6 horizontal drilling spindles (4 in X and 2 in Y direction) 1 slot saw (4-10 mm), arranged in X-axis 1 main spindle HSK F-63, 9 kW Preparation for 0-360° C-axis 6 consoles for accommodating vacuum pods Travelling laser for vacuum pod positioning 2 working zones for pendulum operation Handheld terminal Automatic central lubrication Note: Loading into containers and seaworthy packaging by the seller is not possible.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, foratrice-biesse-skipper-100 Dsdpfxoyay H Ne Abhscc

Kondisi: hampir baru (bekas), 1 unit penggilingan 8 mata bor vertikal 6 mata bor samping 1 gergaji 12 kW Djdpfx Abeyam Hvehjcc Tahun produksi: 2011

Kondisi: bekas, Tahun pembuatan: 1996, 9041 Dcsdpfx Absx U A R Uohjc

Kondisi: bekas, Tahun pembuatan: 2013, 1 Djdpfsx Urnisx Abhscc

Kondisi: bekas, Tahun pembuatan: 2006, Area kerja X-Y-Z: 5300 x 1700 x 180 mm Panjang lintasan X-Y-Z: 6040 x 1810 x 280 mm Kepala bor dengan 30 + 8 spindle Kecepatan putar: 6000 rpm Daya: 2,2 kW Pelumasan sentral otomatis Meja kerja TV dengan 10 penyangga L=1500 4 area kerja 2 laser silang Pompa vakum 250 m³/jam Kontrol PC Windows Unit frais vertikal ISO 30, 7,5 kW dengan penukar alat RAPID 14 dan poros vektor Unit bor tambahan (poros E) Dongle untuk perangkat lunak XILOG Lokasi penyimpanan: Nattheim Dodpfxex Twd Hj Abhocc

Kondisi: bekas, Tahun pembuatan: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis travel length: 200 mm. Clearance height: 180 mm. The machine base is a monolithic construction made from thick-walled steel, reinforced throughout the machine bed with welded-in triangular plates for exceptional stability. The triangular design, particularly with a broad base for load-bearing components, is key to ensuring long-term precision and rigidity. The machine layout allows users optimal workflow with minimal space requirements. This chassis design provides the machining unit with a balanced and secure foundation, enabling outstanding load distribution. The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on precision-ground prism guides using recirculating ball carriages. The working unit, mounted on it, also travels on prism guides and recirculating ball carriages for robust performance. Description of aggregates and standard accessories Drilling unit: Drill head with 10 + 4 spindles: · 6 individually selectable vertical spindles in X · 4 individually selectable vertical spindles in Y · 2 horizontal spindles in X (1+1) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Pitch: 32 mm · Drill holder: M10 with 11 mm centering · Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): · Tool holder: HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) · Clockwise/anti-clockwise operation · Ceramic bearings · Included: 4 tool holders (right-hand), without collet Dcodpfx Absx Twdyehoc Tool changer: · Lateral tool magazine, 7-fold (TR7), fully enclosed against chip contamination · 7 tool slots for HSK 63F tool holders, arranged in a row · Max. tool diameter: D=120 mm · Max. weight per tool holder: 4.5 kg · Max. total tool weight (TR7): 20 kg · Angle heads can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter · 1 output for collets 3-20 mm (ER32) · 1 output for saw/collet 3-12 mm (ER20) (for saw blade D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. front milling tool diameter: 20 mm · Max. front milling tool length: 110 mm · Max. rear milling tool diameter: 12 mm · Max. rear milling tool length: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER32): 50 mm · Saw blade arbor diameter (ER20): 12 mm Work table: The work table is designed to provide the operator with maximum freedom of movement. The vacuum quick-clamping system allows for highly flexible, precise positioning and optimal workpiece holding. · 4 supports, 900 mm, steplessly manually adjustable in X · 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) · 2 stops in X (left/right) · 1 stop in Y per support (6 in total) · Retractable reference stops, CNC-controlled · Includes: 4 plug-in adapters for vacuum cups · Standard pendulum processing (2 working zones) Axis movement: The X, Y, and Z axes are driven via precision-ground recirculating ball screws of the highest accuracy. The X-axis ball screw is centrally located for maximum performance.

Kondisi: bekas, Tahun pembuatan: 2011, · Working area: 2,550 x 1,067 mm · Travel path X-Y: 2,980 x 1,450 mm · Z-axis travel length: 150 mm · Clearance height: 120 mm Drilling Unit F14: · Drill head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Pitch: 32 mm · Drill holder: M10 with 11 mm fitting · Pneumatic feed stroke: 60 mm Grooving Saw Unit in X: · Integrated in the drill head · Grooving saw blade with diameter up to max. 120 mm Main Milling Unit: · Tool holder HSK 63F · Stepless speed 1,500 – 24,000 rpm via inverter · Motor power 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power 7.5 kW (10 HP) from 12,000 rpm (S6) · Reversible direction · Ceramic bearings · Prepared for the use of angle gearboxes Tool Changer TR10: Automatic lateral tool change system for 10 tools. · Number of tool positions: 10 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight of all tools: 28 kg A central extraction nozzle combines all processing units into a single 200 mm connection. As a result, the required extraction capacity is reduced to approx. 3,200 m³/h. Work Table TVF: Dsdpfxox Twc No Abhjcc The work table is designed to guarantee the operator maximum freedom of movement. The quick-action vacuum clamping system ensures maximum flexibility with exact positioning and optimal holding of the workpieces. · 4 TVF support rails, L=1,100 mm, continuously adjustable in X · 12 TVF vacuum suction pads, 120 x 120 mm, continuously adjustable in Y · 2 stops in X (1 left / 1 right) · 1 stop in Y per support rail (total 4 pcs.) · Retractable reference stops are CNC controlled Automatic Central Lubrication: An electronic CNC control device distributes the correct amount of grease (X, Y, Z axes) Vacuum System (Base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. vacuum (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in operator’s native language Safety devices with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Supply: 400 V 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction connector diameter: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Vacuum: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF support rails L=1,100 mm and 18 vacuum suction pads 120 x 120 mm Cross laser for positioning the vacuum suction pads Two cross lasers mounted on the unit carrier facilitate easy positioning of the vacuum suction pads. Location: Nattheim