S.r Cnc Tec

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 2.542 h, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542h X travel: 400 mm Kodpfx Ahey S E Ahohslt Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirement (approx.): 2,000 x 2,000 x 2,100 mm Total connected load: approx. 7 kVA Centralized lubrication Coolant system CE-compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp

Kondisi: bekas, CNC vertical machining center FEHLMANN type PICOMAX 60 CNC control HEIDENHAIN TNC 426 Serial No. 14599641 Year of manufacture: 1999 Travel ranges X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate 1 - 20,000 mm/min Rapid traverse 20 m/min Feed force: 12,000 N Clamping surface of the table 920 x 380 mm T-slots 7 pcs, 12-H8 mm Max. table load 250 kg Table height 1,004 mm Distance spindle nose - table 94 - 704 mm Spindle overhang - column 405 mm Spindle speed 50 - 18,000 rpm, stepless Spindle drive 10.2 kW (60% duty cycle) Max. torque 70 Nm (up to 1,240 rpm) Spindle taper SK 30 / DIN 69871A Pull stud DIN 69872 Drilling capacity in steel 25 mm Milling capacity in steel / aluminium 100 / 700 cm³/min Tapping capacity in steel / aluminium M20 / M24 Tool changer 24 positions Tool change time approx. 6 sec. Chip-to-chip time approx. 8 sec. Control Heidenhain TNC 426 Power supply 400 Volt, 50 Hz Connected load 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 Klsdpfx Ahoy N Du Djhjt - Tool measurement system - TFT display - Direct path measuring system - Coolant system 200 liters, external - Spindle cooling unit, external - Central lubrication Vogel - Pneumatic supply 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on 97,000 h - Machine on 80,000 h - Program run 42,000 h Space required L x W x H 2,000 x 1,700 x 3,000 mm Weight approx. 3.2 tons Good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 9.800 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 460 mm, panjang umpan sumbu Z: 450 mm, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 460 mm, jarak gerak sumbu Z: 450 mm, kecepatan spindel (maks.): 12.000 rpm, kecepatan spindel (min.): 50 rpm, lebar meja: 500 mm, panjang meja: 630 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 12.000 rpm, kecepatan rotasi (min.): 50 rpm, berat keseluruhan: 6.500 kg, tegangan masuk: 400 V, arus masuk: 29 A, frekuensi input: 50 Hz, CNC machining center EMCO Maxmill 630 – Year of manufacture 2021 – Excellent Condition For sale is a high-quality CNC machining center of the type EMCO Maxmill 630 from the year 2021. Model: MX 630 Serial Number: M-0060621 Weight: 6,500 kg Month/Year of Manufacture: 04/2021 Compressed Air Pressure min./max.: 0.6 / 0.7 MPa Rated Voltage and Frequency: 3PE AC400V 50Hz Full Load Current: 29 A Power Line Fuse: 50 A gG-GL Rated Short-Circuit Current: 10 kA Wiring Diagram Number: MX630H2Y01 Control Cabinet Weight: 500 kg Kljdpfey Nmh Hex Ahhet The machine is in excellent, well-maintained condition and has been regularly serviced. It is currently still in operation and can be inspected at any time by appointment. Technical Data: Power: 15 kW Max. Torque: 100 Nm Controller: Heidenhain Control Type: TNC620 NC Software: 817601 070SP2 Hotfix1 FS Travel (X, Y, Z): approx. 500 x 460 x 450 mm B-axis Swivel Range: +/- 100° C-axis Swivel Range: Nx360° Workpiece Table: Diameter 630×500 mm T-Slot Width: 14 (center H7) Spindle: 50–12,000 rpm Tool Changer: 30-fold ISO 40 Spindle Hours: approx. 2,400 h Control Hours: approx. 9,800 h Equipment / Features: - Regular maintenance by qualified personnel - Very good overall condition - All documentation/maintenance records available - Precise and reliable in operation - Ideal for single-part and series production Asking Price: €109,000 Location: Austria / Styria Miscellaneous: The machine is ready for immediate use. Sale due to restructuring / new acquisition. Inspection and test run possible at any time by appointment. If interested or if you have any questions, please feel free to contact us.

Kondisi: sangat baik (bekas), emco-easy-cycle-steuerung-001 Klodjy H Di Aopfx Ahhet

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Sumbu X 300 mm Sumbu Y 200 mm Kodpfx Ahjyyykpehslt Sumbu Z 350 mm Kepala alat SK 30 Kecepatan spindle 80 - 2.200 rpm Termasuk ragum Termasuk indikator digital Termasuk berbagai alat Termasuk buku petunjuk penggunaan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12071602, Kami menawarkan pusat pemesinan CNC 5-sumbu ARIX V450 yang sangat terawat dengan baik, tahun pembuatan 2012. Model: V450 Tegangan: 400 V Fase: 3 Daya masuk: 12 kVA Daya spindle: 7,5 kW Kecepatan spindle: 8000 rpm Nomor seri: 12071602 Tanggal pembuatan: 2012-07 Berat: 3500 kg Luas penempatan yang dibutuhkan: 2,7 m (lebar depan), 2,3 m kedalaman, 2,5 m tinggi !!!!! Silakan lihat deskripsi detail pada PDF terlampir. !!!!! Kedpfjyybx Isx Ahhjlt Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Kontrol: Emco Easycycle Area Kerja Perjalanan sumbu X: 450 mm Perjalanan sumbu Y: 400 mm Perjalanan sumbu Z: 350 mm Meja Luas penjepitan (P x L): 800 x 400 mm Beban maksimal meja: 300 kg Spindel Rentang kecepatan putar (variabel): 10 – 5.000 rpm Jarak ke permukaan meja: 40 – 440 mm Holder alat: SK 40 Pergerakan spindle sleeve: 80 mm Kepala frais vertikal dapat diputar: +/- 90° Feed Rentang feed: 10 – 5000 mm/menit Pergerakan cepat sumbu X/Y/Z: 2000 / 5000 mm/menit Daya dorong feed X/Y/Z: 10 / 10 / 15 kN Dimensi Dimensi P x L x T: 1980 x 2030 x 1990 mm Ksdpfx Ahjyvrkashelt Berat mesin: 2270 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 350 mm, kecepatan spindel (maks.): 2.500 rpm, gores kuas bulu: 100 mm, 1 Klodpfxjyvra Ie Ahhjt

Kondisi: sangat baik (bekas), jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 350 mm, kecepatan pemakanan sumbu X: 5.000 m/menit, laju pemakanan gandar Y: 5.000 m/menit, laju pemakanan sumbu Z: 5.000 m/menit, tinggi total: 2.200 mm, lebar total: 2.300 mm, panjang total: 1.990 mm, lebar meja: 400 mm, panjang meja: 800 mm, kecepatan rotasi (min.): 5.000 rpm, beban meja: 300 kg, berat keseluruhan: 2.200 kg, Universal milling machine with toolmaker's precision Small batch production up to complex workpieces Vertical milling head with hydraulic tool clamping, Y and Z milling axes Handwheels on all three axes Linear guides on all three axes Retractable work area cover with large chip protection Main motor with spindle brake Kledpfoyucc Nex Ahhet X-axis travel: 450 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Max. table load: 300 kg Feed rate X-axis: 5,000 mm/min Feed rate Y-axis: 5,000 mm/min Feed rate Z-axis: 5,000 mm/min Tool holder: ISO 40/BT/MK Spindle power: 10 kW Spindle speed: 5,000 rpm Length: 1,990 mm Width: 2,300 mm Height: 2,220 mm Weight: 2,200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, this does not constitute representation or contractual terms. We recommend that you verify all essential details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 350 mm, kecepatan pemakanan sumbu X: 5.000 m/menit, laju pemakanan gandar Y: 5.000 m/menit, laju pemakanan sumbu Z: 5.000 m/menit, tinggi total: 2.220 mm, lebar total: 2.300 mm, panjang total: 1.990 mm, lebar meja: 400 mm, panjang meja: 800 mm, beban meja: 300 kg, berat keseluruhan: 2.200 kg, Universal milling machine with toolmaker precision Suitable for small-batch production as well as complex workpieces Vertical milling head with hydraulic tool clamping Milling in Y and Z axes Handwheels on all three axes Linear guides on all three axes Retractable work area safety enclosure with large chip protection Main motor with spindle brake X-axis travel: 450 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Table load capacity: 300 kg Feed X-axis: 5000 mm/min Feed Y-axis: 5000 mm/min Feed Z-axis: 5000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 10 kW Spindle speed: 5000 rpm Length: 1990 mm Width: 2300 mm Height: 2220 mm Weight: 2200 kg Klodpfx Asyub Udjhhjt Please note: The information on this page has been compiled by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend verifying all critical details independently.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The machine is on display. Optimill F 80 CNC milling machine – direct from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control stands out for its performance, speed, precision, and long service life. • Column-type design in cast iron for high rigidity • Carousel tool changer with 12 tool stations • All linear guides with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop facilitates program run-in considerably • Coolant system with 70-liter coolant tank • Tool change is automatic or by pushbutton (electropneumatic tool clamping device) • Solid, precise milling table – generously sized and precisely surface-machined • Access doors are generously dimensioned to minimize cleaning and maintenance times • LED machine light for full illumination of the workspace SINUMERIK 808 ADVANCED Compact and robust Communication features: • Front panel USB (IP65) • Serial interface RS232C • RJ45 Ethernet at the rear User-friendly: • Technology-specific keyboard layout • Hard keys with protective membrane Process-reliable:  LED tool number display  MCP with rotary switch for feed and spindle override Comprehensive package:  RJ45 Ethernet port  Ready for remote maintenance  AST function; allows easy optimization for higher requirements in dynamics and accuracy  Absolute encoder / no referencing required  Increased accuracy • Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X-axis 20 m/min Y-axis 20 m/min Z-axis 20 m/min Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 12 kVA Horizontal milling table Length 800 mm Width 260 mm Distance vertical spindle – table min. 100 mm Distance vertical spindle – table max. 550 mm T-slot size 16 mm Number of T-slots 5 T-slot spacing 50 mm Max. load capacity 200 kg Accuracy Repeatability ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump drive power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Travel X-axis automatically 450 mm Y-axis automatically 260 mm Z-axis automatically 450 mm Distance spindle – column max. 370 mm Vertical spindle Kjdpfxjymkcue Ahhslt Spindle interface BT 40 Speed range 50 – 10,000 rpm Speed range note: Please note that the maximum spindle speed must be reduced by approx. 20% in continuous operation Continuous operation drive motor power S1 3.7 kW Drive motor power S6-30 % duty 5.5 kW Drive motor torque S1 continuous 24 Nm Drive motor torque S6 30% duty 36 Nm Feed motor torque X-axis S1 continuous 6 Nm Y-axis S1 continuous 6 Nm Z-axis S1 continuous 11 Nm Tool changer Type: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time – chip-to-chip: 7 sec

Kondisi: hampir baru (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Emco C40 Linear with digital display and path control in excellent CONDITION, with tool holders, CE-compliant!! Technical Data: >> Year of manufacture: 2009, Machine No. BA1GX1201 >> Milling table clamping surface: 800 x 400 mm Klodpsyliffefx Ahhst Number of T-slots: 8 T-slot width: 14 H8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speed: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical quill and horizontal spindle – SK40 taper >> Manual tool clamping system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Approx. dimensions: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged enclosure >> Coolant system >> Machine lamp >> Tool trolley with tool holders About the Machine: For sale is a Emco C40 Linear universal milling machine with path control. This universal milling machine is in near mint condition. It comes from a government facility where it saw very little use. The control system is very easy to operate. Switching from vertical to horizontal milling is exceptionally straightforward due to the vertically tilting milling head. The Emco has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the machine under power at our location.

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Maschinen-Nr. F4UT3901, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, gores kuas bulu: 100 mm, gerak cepat sumbu X: 3 m/menit, pergeseran cepat sumbu Y: 3 m/menit, pergerakan cepat sumbu Z: 1 m/menit, tinggi total: 2.120 mm, lebar total: 2.115 mm, panjang total: 2.220 mm, lebar meja: 500 mm, panjang meja: 900 mm, kecepatan rotasi (maks.): 3.150 rpm, kecepatan rotasi (min.): 63 rpm, berat keseluruhan: 2.550 kg, Perlengkapan: dokumentasi / manual, Ditawarkan sebuah mesin frais EMCO FB-6. Aksesori: 2 ragum mesin hidrolik, lemari pintu geser bergerak untuk alat pemotong termasuk 17 holder cutter, lemari laci alat dengan sekitar 150 cutter berbeda, lemari pintu ayun dengan berbagai cutter. Manfaatkan kesempatan untuk melihat mesin ini langsung di lokasi dalam keadaan terpasang listrik dan yakinkan diri Anda terhadap kondisinya. Kedoyka Rcspfx Ahhjlt

Kondisi: bekas, x-Perjalanan 850 mm y-Perjalanan 300 mm z-Perjalanan 450 mm Ukuran meja 1100 x 250 mm Kontrol konvensional Kedpfeyfwyqex Ahhjlt Holder SK40 Rentang kecepatan 35,5 - 1800 rpm Kebutuhan daya total 5,0 kW Berat mesin sekitar 1,25 t Dimensi P x L x T 1,8 x 1,7 x 1,8 m Perlengkapan: - Tampilan digital Heidenhain - Feed dan spindle dapat diatur tanpa tingkat - Sistem pendingin - Pelindung chip - Ragum hidrolik - Kondisi baik - Holder alat SK40 dan aksesori, lihat gambar

Kondisi: bekas, Tahun pembuatan: 2003, Mesin milling DMG DMU 100 T tahun produksi 2003. Data teknis lebih lengkap dan gambar tambahan tersedia atas permintaan. Kljdpfsx T A Tyjx Ahhst

Kondisi: bekas, Tahun pembuatan: 1969, x-Weg 710 mm y-Weg 250 mm z-Weg 400 mm Kledpfjx I Sf Uox Ahhet Tischgröße 1200 x 300 mm Steuerung konventionell Aufnahme SK40 Drehzahlbereich 50 - 2500 U/min Gesamtleistungsbedarf 2,2 kW Maschinengewicht ca. 1,7 t Abmessungen L x B x H 2,1 x 2,0 x 1,6 m Ausstattung: - Digitalanzeige - Kühlmittelanlage - Huron-Fräskopf - NotAus-Einrichtung - Dokumentation

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, Mesin frais bekas Merek: Macmom Tipe: M100NC Tahun pembuatan: 1998 Klsdpfxjx Ey R To Ahhjt

Kondisi: bekas, id-001 Klsdoxwzcxspfx Ahhjt

Kondisi: bekas, x3001 Kljdpoxv D U Ijfx Ahhet

Kondisi: bekas, Tahun pembuatan: 1984, xweg410 Kjdpfx Ahjxlufpehjlt

Kondisi: baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2803-2693, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 6.300 rpm, kecepatan spindel (min.): 32 rpm, gores kuas bulu: 80 mm, jarak gerak quill: 80 mm, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, For sale is a precise and robust Friedrich Deckel FP3NC tool milling machine, year of manufacture 1985, equipped with Dialog 4 CNC control. This machine is German quality-made and designed for tool and mould making as well as for precise single-part and small-batch production. Technical Specifications (excerpt) Model: FP3NC Control system: Deckel Dialog 4 Year of manufacture: 1985 Serial number: 12767 Main spindle power: 2.0 / 3.0 kW, pole-changeable three-phase brake motor Spindle speeds: 31.5 – 6300 rpm (2 ranges, manually switchable) Tool holder: SK 40 Quill stroke (manual): 80 / 80 mm (horizontal/vertical) Travel paths: X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 2 – 3600 mm/min Rapid traverse: 4000 mm/min T-slot table: 4 slots, 14H7, spacing 63 mm Total weight: approx. 1800 kg Electrical connection: 380 V, 50/60 Hz, connected load 14.5 kVA Rated current: 22 A Control voltage: 24 V Features & Control 4-axis path control with conversational programming 3D linear and circular interpolation, helical interpolation, polar coordinates Numerous drilling and milling cycles, graphically assisted cycle entry Milling cycle “contour pocket” for pocket machining (including irregular shapes with islands) Subprogram technology, program memory up to 512 kBytes Tool offsets for up to 100 tools Interfaces for cassette recorder, punched tape reader, floppy disk or Winchester drive (DNC capable) Ksdpfx Asxlghpehholt Condition & Miscellaneous Machine is fully functional Precise, sturdy construction – ideal for workshops, training or production Operating manual and technical documentation included Viewing by appointment possible

Kondisi: siap digunakan (bekas), Emco emcomat FB4 Mesin Milling Kontrol CNC pada sumbu X dan Y oleh Proto Trak Tipe AGE 2 Juga dapat digunakan secara konvensional. Kjdpfx Ahsxc H I Rjhjlt Spindle taper SK40 Kecepatan spindle: 50-2500 rpm X-axis: 450 mm Y-axis: 300 mm Z-axis: 350 mm Panjang meja: 800 mm Lebar meja: 400 mm Dilengkapi dengan sistem pendingin, emergency stop, dan pelindung meja dengan interlock.

Kondisi: bekas, Tahun pembuatan: 2008, x-Weg 400 mm y-Weg 300 mm z-Weg 400 mm Spindelaufnahme ISO 40 Spindeldrehzahlen 40 - 2.000 U/min Tischgröße 750 x 320 mm Vorschübe stufenlos 10 - 380 mm/min Eilgang 1.200 mm/min Antriebsleistung 2,2 kW Pinolenhub 80 mm Klsdpfx Ahjxa Hf Rehet Betriebsspannung 400 V Gesamtleistungsbedarf 4,7 kW Maschinengewicht ca. 1,1 t Raumbedarf ca. 1,15 x 1,40 x 1,85 m - Fabrik-Nr.: 148373 - 3-Achsen-Digitalanzeige - horiz. Fräseinrichtung - Fräskopf schwenkbar ±45° - Kühlmitteleinrichtung

Kondisi: bekas, Tahun pembuatan: 2001, Travel axes: X-axis 400 mm, Y-axis 250 mm, Z-axis 400 mm Tool holder: ISO 40 Ksdpfxjxab T Ae Ahhjlt Spindle speeds: 30–6300 / 20–4200 rpm Feed rates: 0–10,000 mm/min Quill travel: 90.0 mm Table size: 600 x 320 mm T-slots: 5 x 14 x 63 mm Control system: TNC 410 CA Spindle hours (power on): approx. 126 hrs Motor power: 11.0 kW Weight: 1300 kg Space requirement: approx. 1600 x 1500 x 1900 mm Original price incl. special accessories: ~ €72,000 Machine was used very rarely (!!) Only approx. 126 spindle hours (spindle on) Equipment: - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC contouring control TNC 410 CA * User-friendly contouring control with * Conversational programming in easy-to-understand plain text dialog * HEIDENHAIN electronic remote control with handwheel - Swiveling control panel, mounted to the right side of the machine - Hydraulic tool clamping (drawbar DIN 69872-A) - Double-sided swiveling vertical milling head – ISO 40 - Stepless spindle speed range vertical: 30–6300 rpm - Stepless spindle speed range horizontal: 20–4200 rpm - Robust, rigid angle table with 5 T-slots - Coolant system with tray - Chip splash guard enclosure - Operating instructions and electrical diagram for the machine Special accessories included: - 1x pneumatic clamping plate, with supply unit - 1x WALTER TANIH125 NEGI-R dividing attachment - 1x machine vice – HILMA RÖMHELD type SM 100 - Numerous tool holders - Machine anti-vibration mounts * Machine video: ?v=3dqLbTme81E

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Tool Milling Machine Emco C40 Linear with Digital Readout, Path Control - Excellent Condition, CE Compliant!! Technical Specifications: >> Year of manufacture: 2008 | Machine no.: BA1DW2503 >> Milling table clamping area: 800 x 400 mm Clamping slots: 8 Kljdpfx Aowxxd Ejhhet Slot width: 14 H8 Slot spacing: 50 mm Max. table load: 300 kg >> Infinitely variable spindle speeds: 10-5000 rpm >> Infinitely variable feed rate: 10-2000 mm/min Rapid traverse X: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Approx. dimensions: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts lists, operating manual >> Enclosure (sliding cabin) >> Coolant system >> Machine lamp >> Indexing head with tailstock >> Steady rest >> Röhm machine vice About the machine: Offered here is a tool milling machine Emco C40 Linear with path control. This universal milling machine is in nearly new condition. It comes from a state-owned facility where it has seen very little use. The control system is very user-friendly. Additionally, the machine features hydraulic clamping both for vertical and horizontal operations. Conversion from vertical to horizontal is very straightforward, simply by swinging the vertical head aside. The Emco has been mechanically and electrically inspected by us. You are welcome to view and test the machine under power at our facility.