Dreier Maschinenhandel

Kondisi: belum diuji (bekas), Tahun pembuatan: 2014, Fungsionalitas: belum diuji, daya: 25 kW (33,99 hp), tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 12 mm, kecepatan pemakanan sumbu X: 18 m/menit, Perlengkapan: Penandaan CE, TECHNICAL DETAILS Panel Height min.: 8 mm Panel Height max.: 60 mm Edge Thickness min.: 0.3 mm Edge Thickness max.: 12 mm Max. Feed Speed: 18 m/min Sequence of Processing Steps: Section 1 Operation: Positioning Motor Power: 2.5 kW Automatic Control Edge Preheater Glue Tank Pre-glue Heater Roll Magazine Section 2 Operation: Trimming Number of Motors: 2 Section 3 Operation: Edge Milling Number of Motors: 2 Motor Power: 0.55 kW NC Positioning Section 4 Operation: Corner Rounding Number of Motors: 2 NC Positioning Fsdpfxoytr Rgj Aagefw Section 5 Operation: Milling Number of Motors: 1 Motor Power: 3.5 kW Section 6 Operation: Edge Scraping Section 7 Operation: Glue Scraping Section 8 Operation: Brushing Number of Motors: 2 MACHINE DETAILS Total Power: 25 kW EQUIPMENT Panel Support Guide Spraying Unit Control with more than 20 control systems CE Marking The machine is sold and delivered in its actual technical and legal condition (“as seen and inspected”), based on photo documentation and technical/commercial documentation of descriptive character. The buyer has the right to inspect the goods before collection, and assumes responsibility for installation, securing, and use of the machine at the destination. External Reference: 6216

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 25 m/menit, kecepatan rotasi (maks.): 12.000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Aggregate 1 Aggregate: Pre-milling Unit Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 2 Ffsdsytr Hbopfx Aagsw Aggregate: Top Trimming Unit No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Aggregate 3 Aggregate: Multifunction Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 4 Aggregate: Top Trimming Unit Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Aggregate 5 Aggregate: Edge Scraper Model: MN21 with NC positioning Edge Processing Aggregate 6 Aggregate: Glue Scraper Model: FA11 Edge Processing Aggregate 7 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Aggregate 8 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Installed total power: 35 kW EQUIPMENT Spraying unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and descriptive technical/commercial documentation. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and operation of the machine at the destination. External Reference: 6216

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 380 V, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 8 mm, jenis aktuasi: listrik, tinggi total: 1.774 mm, panjang total: 4.580 mm, berat keseluruhan: 1.450 kg, Perlengkapan: Penandaan CE, dokumentasi / manual, Ketebalan benda kerja yang akan dilapisi: antara 8 dan 60 mm, Ketebalan tepi hingga 8 mm tergantung agregat Komposisi: -kalibrasi, -pemasukan tepi, -pengeleman, pemotongan ujung, kelompok pemotong/milling; frais datar atau profil pada tepi atas atau bawah, Ffodpfeytp Hrsx Aagew agregat pisau profil, kelompok pengerokan, stasiun pemolesan Jembatan penekan, pembatas pemasukan, panel kontrol Tahun 2017

Kondisi: bekas, Tahun pembuatan: 2013, Used machine Year of manufacture: 2013 Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber coating. Digital counter for height adjustment Fedpfxoytkiue Aagefw - Direct adhesive application to the workpiece: Leak-proof glue pot with glue supply from below and fast heating-up time after machine standstill - Flush cutting unit for front and rear workpiece edges, automatic tracing on the workpiece, pneumatic cutting with knife for cuttable edges - Flush milling unit with vertical tracing and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, steplessly adjustable from 4000 to 18000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film table Ø 800 mm Technical details: - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Heating power glue pot: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Heating time: approx. 10 minutes - Pneumatic connection: 6 Bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm (without film table Ø 800 mm) - Net weight: approx. 260 kg Availability: short notice Location: Flörsheim

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, nomor mesin/kendaraan: AH/115881, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 2.364 kg, Perlengkapan: dokumentasi / manual, Ketebalan elemen: 60 mm Ketebalan tepi: 8 mm Kecepatan pengumpanan: 18 m/menit Kabin kedap suara: Ya Tangki lem: Ya Kontrol layar sentuh (10 inci) Ketinggian diatur manual dari panel kontrol Fjdpfxjytkczs Aagefw Frais 4-sumbu dikendalikan manual dari panel Pemotongan melintang Dua unit pembungkus, pengikis profil

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, voll-ausgestattete-kantenanleimmaschine-brandt-kdf-230-airtec-20 17 Ffedpfx Aaoythxmogew

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Edge banding machine from 2006. The HOMAG Optimat KAL 330 features a flexible production layout for furniture components, allowing workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It is equipped with a single-sided edge bander capable of processing various edging materials up to 20 mm thick. If you are looking for high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edge banding machine, which we have for sale. Contact us for more details. • Line workpiece capacity: Ffsdpfjytf Irox Aagew • Length: 250-3000 mm • Width: 120-1200 mm • Thickness: 8-60 mm • Edge banding machine (KAL 330) – Base and transport • Continuous machine frame; workpiece support with extendable roller rail ~800 mm • 80 mm wide transport chain with rubber coating; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18-25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depends on workpiece length) • Workpiece protrusion/overhang 30 mm • Workpiece thickness 12-60 mm • Edging material from strip: 0.4-20 mm (max. cross-section 900 mm²) • Edging material from coil: 0.3-3 mm (max. cross-section: PVC 135 mm², veneer 100 mm²) • Max. coil diameter 830 mm • Pneumatic connection 7-8 bar • Infeed system and control (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic feeding (longitudinal and transverse); suitable for dimensionally accurate, square parts • Stepless adjustment of the infeed guide (axis), adjustable speed at entry terminal • Automatic aggregate lateral adjustment (workpiece overhang 30-80 mm) for gluing and post-processing • Entry terminal; solvent applicator top/bottom • Edging preparation and gluing • Pre-milling unit: 2 motors, 4 kW each, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Premelting unit with granulate reservoir • Quick-change system for QA/QE application unit; QA front glue reservoir for color changes • Base glue unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • HL84 milling unit with stationary milling fence for sensitive edges • Pneumatic milling motor adjustment (2 positions: flush/even and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side milling fence adjustment when changing edge thickness • Rough trimming unit: 2 motors on top of each other, 1.5 kW each, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position adjustment: rough trimming with ~0.2 mm overhang / without overhang • Reserved space for a fine trimming unit • Servo contour trimming unit FK13 automatic: • 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-position tool changer • Feed speed max. 20 m/min; minimum distance between workpieces 500 mm • Workpiece thickness 12-60 mm • Automatic FK adjustment for consistent radii with varying edge thicknesses; automatic retraction • FK workpiece guidance with additional clamping for min. 120 mm workpiece length (one-sided) • Post-processing and cleaning • Multi-cleaning unit MN21 automatic:

Kondisi: baik (bekas), Kode: 0367 Merek: SCM Model: BASIC 1 Mesin edge bander otomatis untuk tepi kayu, PVC, melamin, ABS Data teknis: Tinggi kerja: 8 - 40 mm Ketebalan material pelapis: 0,4 - 3 mm Kecepatan umpan: 8 m/menit Panjang panel minimum: 140 mm Lebar panel minimum: 60 mm Unit pemotong akhir: Kecepatan rotasi 10.000 rpm – Daya motor 0,6 kW Unit pemotong tepi akhir: Kecepatan rotasi 27.000 rpm – Daya motor 0,5 kW – Kemiringan pisau 12° Tekanan kerja: 6 bar Fsdpfxoytfnfe Aagjfw Dimensi keseluruhan: 1700 x 700 x 1250 mm Berat: 470 kg

Kondisi: sangat baik (bekas), Luas kerja: 225 cm x 120 cm Fodpfx Aaoytdhdogefw rak emas

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, -Mesin dengan pemrosesan lengkap dan pengeleman kayu solid hingga 25 mm -Mesin berat dengan berat sekitar 3.000 kg -Masih digunakan dan sepenuhnya berfungsi Ffedpfxjytcqwj Aagew -Panjang total sekitar 8.100 mm Deskripsi detail lihat lampiran, model UNImatic 25.7-F!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Dijual Brandt KDF 430C mesin pelapis tepi dalam kondisi sangat baik! KETEBALAN TEPI: 0,4-8 mm, KETEBALAN KERJA: 8-60 mm dengan penyesuaian ketinggian bermotor, KECEPATAN FEED: 11 m/menit, PANJANG TOTAL: 4770 mm, SCRAPER RADIUS dengan penyesuaian pneumatik, SCRAPER DATAR, UNIT PENGHALUS. Fjdjytb Smspfx Aagsfw

Kondisi: sangat baik (bekas), Edgebander ME35TR Ffedpfxoytbuuo Aagew Mata frais awal, Lampu pemanas panel Aplikasi lem dengan rol, Pot lem memiliki fungsi penggantian Guillotine pendahulu pneumatik, Rol penekan, Unit kombo dengan fungsi: - Pemotongan akhir - Pembulatan sudut Unit frais atas-bawah R1 – R2, Pisau siklin profil Pisau siklin rata, Panjang mesin 320 cm, Kecepatan makan 7 m/menit, Maks tinggi elemen 50 mm, Maks tebal edging 3 mm, Mesin bekas, kondisinya hampir seperti mesin baru Hanya 1600 m jam kerja

Kondisi: bekas, Tahun pembuatan: 2005, nomor mesin/kendaraan: 0-261-06-3662, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 6.635 h, daya: 16,2 kW (22,03 hp), tegangan masuk: 24 V, arus masuk: 35 A, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 12 mm, jenis aktuasi: listrik, brandt-kdf-670-en Ffedpfsyr S Enjx Aagsw

Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, Mesin edge banding bekas SCM - Model: Olimpic K360 T-ER1 - Kondisi sangat baik. - Tersedia segera - Video atas permintaan - Tahun produksi: 2016 Fedjyrr Naopfx Aagjfw - Fitur lengkap (2 bak lem ekstra)

Kondisi: sangat baik (bekas), 7920 Ffodpfx Aajyrryfsgow

Kondisi: baik (bekas), Tahun pembuatan: 2021, Edgebander bekas SCM Olimpic K360 - 11 m/menit - Ketebalan pelat: 8 - 60 mm - Ketebalan edging: 0,4 - 6 mm - Panjang mesin sekitar 4.200 mm - Berat sekitar 1.200 kg - Tersedia segera Ffjdpfxsyrrpmo Aagjw - Jam kerja/meteran sedikit (lihat foto) Silakan hubungi kami jika ada pertanyaan.

Kondisi: bekas, Edge bander Holzher Streamer 1057 Ffjdpfx Aaeyrq Eajgsw Frese pendahuluan Aplikasi lem, sistem lem cartridge GLUE JET Cocok untuk lem PUR Dilengkapi dengan pembuangan lem Gunting pneumatik pendahuluan Rol penekan Gergaji pemotong akhir dapat diatur sudutnya Milling atas-bawah R1, R2 Pembulatan sudut Scraper profil Scraper datar Maks. tinggi pelapisan: 60 mm Ketebalan edging rol maks.: 3 mm Kecepatan maju 10 m/menit Disertai cairan Polisher

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, pl-to-en-list-2024-06 Ffedpfx Aasyrniiegow

Kondisi: baik (bekas), Tahun pembuatan: 2007, EDGEBANDING MACHINE WITH JOINTING AND PROFILE COPYING; RELEASE AGENT UNIT, MACHINE USED FOR PUR BONDING^ Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm * Coil material: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed speed: 11 m/min Electric connection: 400 V, 50 Hz, 3 Phases Equipment: Adjustable infeed fence Centrally adjustable top pressure Central manual chain lubrication Operator panel at machine infeed Ffedpfx Aaoyrfh Njgjw Release Agent Unit Jointing cutter unit: 2 x 2.2 kW 1 clockwise and 1 counterclockwise rotation Max. chip removal: 3 mm Gluing unit with synchronous and counter-synchronous rotation 1 main pressure roller and 2 subsequent pressure rollers End trimming unit: 2 x 0.18 kW Pulling cut for high precision Pneumatic adjustment for straight and bevel trimming via program Flush trimming unit: 2 x 0.55 kW With vertical and horizontal tracing 2 working positions selectable via program: flush / radius trimming, all adjustment axes with digital counters for quick setup Profile milling unit: 2 x 0.35 kW For milling edge profiles Max. edge thickness: 3 mm Max. workpiece thickness: 55 mm With pneumatic 2-point adjustment for bevel/radius Profile scraper unit with quick-change heads Tracing top, bottom and side With 2 additional quick-change heads Glue joint scraper unit, pneumatically controlled Tracing top and bottom Cleaning agent unit Buffing unit: 2 x 0.09 kW With cleaning agent application Control: POWER CONTROL PC 20 +

Kondisi: bekas, Tahun pembuatan: 1995, Mesin bekas Tahun pembuatan: 1995 Kondisi: belum diperiksa Perlengkapan dan data teknis: - Ketebalan edging: 0,3-5 mm - Ketebalan benda kerja: 6-45 mm - Lebar benda kerja minimum: 60 mm - Panjang edging minimum: 200 mm - Kecepatan feeding: 11 m/menit - Daya sambungan listrik: 3,4 kW - Diameter koneksi ekstraksi: 100 mm - Kebutuhan udara: 550 m³/jam - Sistem lem: cartridge 1906 - Gergaji potong depan dan belakang: 1975 - Unit frais radius atas dan bawah: 1942M - Pisau tarik radius atas dan bawah: 1929 - Unit polisher: 1941 K - Panjang mesin: 3675 mm - Lebar mesin: 1470 mm - Tinggi mesin: 1200 mm Ffodpfx Aoyq T Insagew Berat: 950 kg Ketersediaan: siap dalam waktu singkat Lokasi penyimpanan: 63934 Röllbach

Kondisi: sangat baik (bekas), SCM S12 SW Mesin Ketebalan Industri – Made in Italy Dijual: Mesin ketebalan industri SCM S12 SW, diproduksi oleh SCM Group (Italia). Mesin pertukangan kayu profesional heavy-duty, cocok untuk bengkel pertukangan dan produksi furnitur. Mesin SCM terkenal akan daya tahan, presisi, dan konstruksi industrinya yang kokoh. Spesifikasi teknis Model: SCM S12 SW Lebar kerja: sekitar 520 mm Tinggi kerja maksimum: sekitar 240 mm Catu daya: 380 V / 3 Phase / 50 Hz Poros pisau: 4 mata pisau Sistem umpan otomatis Tahun: 1990 Made in Italy Kondisi Mesin dalam kondisi kerja bagus dan siap digunakan. Cocok untuk: Bengkel pertukangan kayu Produksi furnitur Ffedpsyq Razsfx Aagow Industri pengolahan kayu

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 40 mm, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 35 m/menit, kecepatan rotasi (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spray device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application via rubber belt Panel guides with NC positioning Glue tank for EVA hot-melt adhesive Premelting device for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on protective devices Ffedpfeyqybuex Aagow CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its destination. External reference: 5321

Kondisi: belum diuji (bekas), Tahun pembuatan: 2007, Fungsionalitas: belum diuji, lebar kerja: 1.935 mm, jumlah spindel: 40, tinggi pelat: 350 mm, panjang kerja: 6.200 mm, jumlah sumbu: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum cups for securing workpieces Safety mats at the front Vacuum pump Waste chip conveyor Fodpsyqx U Hefx Aagjfw Fixed grooving unit for creating grooves in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its destination. External reference: 8105

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Equipment and technical specifications: - Round-pot glue unit - with second glue unit for PUR application - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for face/end trimming - Top/bottom milling: 2 milling units with tracing wheels for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing radii - Surface scraper: for smoothing edge surfaces - Polishing unit: 2 polishing wheels with motors for final finish - Riepe spraying unit - Control system: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10-12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connecting cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight approx. 3,000 kg Availability: short notice Location: Röllbach Ffsdpfx Aajyqanbjgsw

Kondisi: baik (bekas), Kode: 0316 Merek: HIRZT - ITALIA Model: MIREA - Standar CE Mesin pelapis pinggir otomatis dengan lem panas untuk panel, furnitur, pembuatan furnitur sesuai pesanan, pintu kayu, dapur, furnitur kamar mandi dan berbagai aplikasi lainnya – Standar CE Data teknis: Ffodpjypm Tuefx Aagjw Aplikasi lem pada panel Tinggi panel 10–50 mm Maks. tebal tepian 1 mm Dimensi panel minimum 70 x 140 mm Umpan otomatis dengan penggerak sabuk – Kecepatan pengumpanan 4 m/menit Konsumsi daya 4 kW Unit trim penyalin: pemotong 70 x 14 x 12 mm Z4, 15 derajat Unit pemotong ujung dengan pisau Dudukan depan yang dapat diperpanjang – Ekstensi inlet – Tinggi meja kerja 900 mm Dimensi keseluruhan mm 1900 x 1100 x 1250 (t) Berat 300 kg