STAR JELA doo PRIJEPOLJE, SERBIA

Kondisi: sangat baik (bekas), konfigurasi gandar: 3 gandar, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 9.000 kg, beban gandar yang diizinkan (gandar 3): 9.000 kg, pendaftaran pertama: 05/2019, panjang total: 14.040 mm, lebar total: 2.600 mm, jarak roda: 8.910 mm, warna: lain, Tahun pembuatan: 2019,

Kondisi: baik (bekas), jarak tempuh: 273.083 km, daya: 300 kW (407,89 hp), pendaftaran pertama: 04/2012, jenis bahan bakar: diesel, konfigurasi gandar: 8x2, bahan bakar: diesel, rem: pengereman mesin, warna: biru, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, suspensi: lain, Tahun pembuatan: 2012, Perlengkapan: AdBlue, Bluetooth, EBS (Sistem Rem Elektronik), filter jelaga, kendali jelajah, kopling trailer, lampu kabut, pendingin udara, pengaturan jendela elektrik, program stabilitas elektronik (ESP), spion elektrik,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 2.200 mm, jarak lintasan sumbu Y: 600 mm, lebar meja: 650 mm, panjang meja: 2.600 mm, beban meja: 2.300 kg, berat keseluruhan: 12.000 kg, kecepatan spindel (maks.): 6.000 rpm, daya motor spindle: 28.000 W, berat alat: 10.000 g, jumlah sumbu: 3, This 3-axis IBARMIA ZV 40 L2200 vertical machining center was manufactured in 2000. It features an X-axis travel of 2200 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 600 mm. The machine offers a maximum table load capacity of 2300 kg and a rapid traverse speed of 30 m/min. If you are looking for advanced machining capabilities, the IBARMIA ZV 40 L2200 available for sale is worth considering. Contact us for further details. - X-axis travel in 2-station machining (pendulum mode): 720 mm - Z-axis travel (vertical): 600 mm (Optional: 800 mm) - Number of T-slots: 5 - T-slot size: 18 mm - Distance between T-slots: 125 mm - Min./Max. distance spindle nose to table: 200 / 800 mm (Optional: 1000 mm) - Tool holder / interface: SK40 - DIN 69871 (Options: HSK A-63 DIN 69893 or HSK A-80 DIN 69893) - Pull stud for SK tool holders: DIN 69672 - Clamping force of tool holder (SK): 12,000 N (Options: HSK A-63: 18,000 N / HSK A-80: 28,000 N) - Bearing inside diameter: 80 mm - Max. standard spindle speed: 6,000 rpm (Options: 4,000 / 8,000 / 10,000 rpm) - Main spindle motor power (100% duty): 28 kW (intermittent: 38.5 kW) - Constant power in standard configuration from: 1,500 rpm - Max. torque at 100% duty: 178 Nm (intermittent: 245 Nm) - Feed force in X, Y, Z at 100%: 13,000 N (intermittent: 15,600 N) - Rapid traverse speed in X, Y, Z: 30 m/min - Max. working feed in X, Y, Z: 10 m/min - Positioning tolerance Tp X(1000mm)-Y-Z: 0.015 mm - Maximum repeatability Ps: 0.010 mm - Measurement system in X-Y-Z: Linear glass scales - Milling capacity in steel (St 60): 650 cm³/min - Drilling capacity in steel (St 60): Ø 60 mm - Tapping capacity in steel (St 60): M-36 - Number of tool stations: 24 (Options: 40 - 52) - Max. tool length: 300 mm - Max. tool weight: 10 kg - Max. tool diameter (full magazine): 85 mm Ncsdoy Umlpepfx Aa Uet - Max. tool diameter (adjacent pockets empty): 125 mm - Tool management: Random - Tool change time: 3.5 s - Chip-to-chip tool change time: 7 s - Footprint: approx. 17 m² - Coolant tank capacity: 370 liters - Machine length (Dimension A): 4,200 mm - Paintwork (2 colors): RAL grey 7037 / blue 5012 - Electric connection: 55 kW - Operating voltage: 400 V / 50 Hz - Compressed air connection: 6 bar - Coolant pump power: 0.75 kW - Standard equipment: CE machine guard, chip conveyor, coolant tank, linear glass scales in X/Y/Z axes, vertical internal guarding along the X-axis, work area lighting, automatic central lubrication, hydraulic counterweight for the spindle head, automatic pneumatic spindle cleaning, mobile control panel, rigid tapping (tapping without compensating chuck). - Factory options available: Through-spindle coolant supply (IKZ), full machine enclosure, partition wall for pendulum operation, rotary tables/indexers for one or two additional machine axes, tool measurement probes, digitizing systems, tool monitoring systems, portable electronic handwheel. Depending on your requirements, some components in the Y-axis may need to be replaced or repaired.

Kondisi: baik (bekas), Polar Mohr 115 XT Mesin Pemotong Kertas Guillotine Mesin ini dalam kondisi sangat baik, siap untuk produksi, setelah inspeksi layanan. Jam kerja rendah. Tahun pembuatan: 2010. Ini adalah merek guillotine paling dihargai, produk andalan. Jogger dan elevator tersedia untuk pemasangan tambahan. Ncsdpsy Umkxsfx Aa Ujt Spesifikasi teknis: Lebar potong: 1150mm Tinggi tumpukan: 165mm Programmer dengan layar sentuh warna 15" Meja angin Fotocell Permukaan meja berlapis krom Penggerak ball screw untuk sisir belakang Garis potong optik Meja samping diperbesar Penggantian pisau melalui panel kontrol Pelindung meja belakang tambahan Berat: 3200kg Daya: 380V Termasuk dokumentasi, kotak alat, balok paku, pisau cadangan, dan satu pisau terpasang di mesin.

Kondisi: baik (bekas), Mesin Die-Cutting ML-800 NXL Mesin ini digunakan untuk memotong bentuk dari cetakan (matrij) pada bahan seperti kertas, karton, kulit, plastik, dan sebagainya. Mesin dalam kondisi sempurna, diproduksi tahun 2018 dan pertama kali dipasang tahun 2020. Ini adalah mesin die-cutting terberat dalam format ini, sangat presisi. Format: 830 x 560 mm Berat: 2.500 kg Ncsdpey Umkrofx Aa Ujt Daya listrik: 380 V Motor: 2,5 kW Perlengkapan: – Kopling dan rem elektromagnetik – Rangka pemasangan cepat – 3 mode operasi: kontinu, tunda waktu, dan manual – Pelumasan tekanan terpusat – Pelindung keselamatan tambahan – Peralatan kerja dan buku petunjuk dengan dokumentasi CE.

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 5.834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen base with ABI MDBA 3500 Ground Improvement Device | Drilling Rig | 5,834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator for transport cost estimates! 💰 Buy Now for EUR 74,500 or Make an Offer. Payment on delivery available for a modest fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points checked ✅ 0 defects ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine designed for concrete pile drilling, soil improvement, and vibro compaction. Carrier unit is a Sennebogen SR25BT (year 2008) with Delmag RH18 drill leader assembly (year 2009). Drill mast travel: 12.50 m, total height: 19.91 m. Outreach: 3.165–4.00 m. Includes feed winch, freewheeling auxiliary winch, helper winch, rear platform. Drill table SHT25. THE KDK ROTARY DRILL HEAD BT180-2 IS NOT INCLUDED, MACHINE IS EXCLUSIVELY FOR SOIL IMPROVEMENT, drill gearbox MBDA 3500 ABI. Comes with single-flight auger. NO Kelly bar included. Mast support cylinder, automatic alignment feature. Hydraulic telescopic undercarriage, adjustable width from 3.0 m to 4.40 m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drilling accessories available separately. Mobile mixing plant also available, MAT brand, consisting of mixing container (throughput 20 m³/h), discharge auger, agitating tank (capacity 4,000 l), and plunger pump with remote control. Condition corresponds to the stated operating hours. At the time of inspection (2023), the machine operated without apparent defects. As of October 2024, storage damage observed on valves, controls, and hydraulic hoses. Simultaneous operation of 2 attachments is not possible. Wear on pins and bushings, as well as general signs of use such as dents and scrapes, are commensurate with the age, mileage, and intended use. The machine was not load tested. Previously used with 55 mm and 80 mm paddles. Device ready for service after rectification of storage damage and maintenance. 📄 Want to see the full inspection report, extra photos, or a video? Tip: Use reference "40844 Equippo" for more details online. Nedpfxoy Umklo Aa Ujct 💡 Reasons to choose this machine and our service: ✔ Professional, comprehensive inspection ✔ Jobsite delivery options ✔ Money-back guarantee ✔ Secure, flexible payment methods 🔄 Considering other equipment? We provide valuable tools and resources for owners and operators – all easily accessible on our platform.

Kondisi: baik (bekas), TYMC-800 Máy Dập Nhiệt Lá Vàng Tổ Ong Phiên bản mới nhất, với bàn tổ ong chuyên dụng cho khóa khuôn. Máy được thiết kế để dập lá vàng, dập nhiệt, và bế khuôn tiêu chuẩn mà không cần tháo bỏ bàn nhiệt. Máy hoàn toàn mới và có bảo hành. Thông số kỹ thuật: Định dạng bế: 830x590mm Dập vàng: 800x540mm Trọng lượng: 3000kg Tốc độ vận hành: 25 chu kỳ/phút Kéo lá vàng: 1-500mm Nhiệt độ vận hành: 20-150°C Ncsdpfx Ajy Umkfoa Uet Nguồn điện: 380V Trang bị: – Bộ ly hợp và phanh điện từ – Khung lắp ráp nhanh – Bảng điều khiển với màn hình cảm ứng, lập trình PLC – Hai hệ thống cấp nguyên liệu độc lập, sử dụng động cơ bước – 3 chế độ vận hành: liên tục, trễ thời gian, thủ công – 4 hệ thống gia nhiệt độc lập, tiết kiệm năng lượng – Hệ thống bôi trơn trung tâm – Màng chắn an toàn bổ sung – Hệ thống cảm biến quang điện – Bộ dụng cụ vận hành và hướng dẫn, tuyên bố CE – Tấm ép áp lực Máy sẵn hàng ngay Chúng tôi cung cấp dịch vụ lắp đặt và đào tạo (giá tùy chỉnh) Bảo hành 12 tháng. Máy hoàn toàn mới. Sản phẩm của chúng tôi là một trong số ít các dòng máy đáp ứng đầy đủ tiêu chuẩn hoạt động tại Ba Lan. Có thể chạy thử máy tại showroom của chúng tôi ở Radom.

Kondisi: siap digunakan (bekas), de Nodoy Umi Ujpfx Aa Uoct

Kondisi: sangat baik (bekas), Diameter roda - maks. 200 mm Lebar roda 300 mm Modul 0,5 - 25 Nodpoy Umi Iefx Aa Usct Jarak puncak 750 mm Berat mesin sekitar 0,2 t Kebutuhan ruang sekitar 0,8 x 0,6 x 0,6 m Alat uji ulir cacing Pengujian: Bentuk flank, sudut pembentukan flank, jarak sumbu Tinggi langkah, lebar celah gigi, tinggi gigi, Runout pada flank

Kondisi: sangat baik (bekas), trans_001 Nodpoy Umizofx Aa Uoct

Kondisi: hampir baru (bekas), Morgana Autocreaser 33 automatische Rillmaschine Das Gerät befindet sich in sehr gutem Zustand. Modernes Gerät, das das Erstellen von Rillungen (Nuten) ermöglicht, wodurch Papier oder andere Materialien leichter gefalzt werden können. Maximale Bogenformate: 330 x 900 mm Grammatur: bis 400 g/m² Programmierbar Gewicht: 150 kg Hersteller: Morgana, Großbritannien Nsdpfx Aey Umiuja Uect Bild-Rillung: Ja Geeignete Materialien: Papier, Karton, Pappe

Kondisi: bekas, mitsubishi-fca335l22-1-cnc-steuerung Ncedpfoy Uminjx Aa Uot

Kondisi: bekas, de-hu-1 Nodpfxoy Umiho Aa Ujct

Kondisi: bekas, de-to-hu Ncsdpfxsy Umibe Aa Uet

Kondisi: bekas, 1 Ncedpfx Asy Umh Rja Ujt

Kondisi: hampir baru (bekas), Heidelberg GTOZ-S52 Offsetdruckmaschine Die Maschine ist einsatzbereit und befindet sich in einem sehr guten Zustand. Sie stammt aus einer kleinen Druckerei. Technische Daten: Format: 36 x 52 cm 2 Druckwerke Gewicht: 3.000 kg Stromanschluss: 400 V Baujahr: 1994 Baldwin Alkoholfeuchtung Bedienpult Nodpsy Umh Djfx Aa Usct Dokumentation und zusätzliche Komponenten sind im Lieferumfang enthalten.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2023, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, masa garansi: 24 bulan, tekanan pompa: 4 batang, daya: 30 kW (40,79 hp), OMAX OptiMAX 60X TiltaJET, 30 kW EnduroMAX Pump and TiltaJET for perfectly vertical cuts Factory-refurbished with manufacturer certification and two-year warranty! This waterjet cutting system from the latest OMAX high-end OptiMAX bridge series represents the state-of-the-art in technology, combining reliability, durability, and maximum load capacity. Quiet and low-emission operation, together with the simplest PC-supported control for precision cutting at the touch of a button, make this series ideal for demanding industrial and workshop environments—from single-shift operation to 24/7. Features • Enclosed measuring system • Digital drives • Brushless servo motors • Surface-hardened precision linear guides • Dual-side gantry (bridge) drive • Maintenance-free IntelliTRAX drive system • Energy-efficient ultra-high-pressure EnduroMAX pump • Convenient standard water level control • Ergonomic operator console on castors Ncodpfx Aoy Umhkea Ujt • IntelliMAX Premium control software • Highly precise 5-axis TiltaJET kinematics • Accuracy up to ± 0.02 mm • Software and machine components utilizing the latest OMAX technology With the TiltaJET swiveling cutting head, the OMAX system achieves cutting precision up to ± 0.02 mm. The cutting head automatically compensates for taper angle errors at the cut edge, regardless of selected quality or cutting speed. The waterjet cutting system’s configuration is fully customizable. The machine can be expanded with a wide range of accessories, tailored to your specific cutting requirements. Please contact us to discuss your configuration preferences. Leasing options with attractive terms are available upon request, for example up to 86 months. As the machine has been factory-refurbished, illustrations may differ from the actual offer. Expedited delivery can be arranged with INNOMAX AG.

Kondisi: bekas, de-01 Nodpfxoy Umhdj Aa Uect

Kondisi: bekas, de-to-hu-it-lt-01 Nodpfx Ajy Umg Toa Uect

Kondisi: bekas, Tahun pembuatan: 2005, 001 Ncsdpfx Ajy Umg Hoa Uet

Kondisi: diremaj di bengkel (bekas), de Njdjy Umf Nepfx Aa Uoct

Kondisi: baru, Tahun pembuatan: 2025, de-to-hu-1 Ncsdey Umf Aopfx Aa Ujt

Kondisi: bekas, de103 Ncodpfsy Umfvex Aa Uet

Kondisi: bekas, tr-1717951456 Ncjdpey Umfpofx Aa Uot

Kondisi: bekas, Tahun pembuatan: 2007, en Nodpfxjy Umfce Aa Usct