TR Engineering

Kondisi: bekas, Tahun pembuatan: 2020, Overview This container discharge system depalletizer (for new glass containers) was manufactured in 2020 by the German company Krones AG. The machine is designed for high-speed depalletizing of new glass containers in beverage filling plants. It operates with a discharge system that uses a four-sided centering carriage to transfer complete layers of containers onto a discharge table. Technical Data Capacity: approx. 48,000 containers/h (up to 57,600 containers/h machine capacity) Application: Depalletizing of new glass containers Configuration: Z-layout with pallet infeed and container outfeed on the upper level Pallet handling: Pallet lifting unit with automatic removal of empty pallets Discharge table: approx. 5,000 mm length Conveyor: Steel chain conveyor Drives: Servo drives (SEW) Discharge system: Four-sided, servo-driven centering carriage Layer handling: Integrated handling module with suction gripper system for layer pads and top frames Vacuum system: Ejector-based System configuration: - Pallet lifting unit - Container outfeed conveyor (approx. 5,000 mm) Isdoy Tn D Depfx Apvjtg - Steel chain conveyor system - Handling module with suction gripper - Packaging material magazine - Discharge device for empty pallets - Safety fence (approx. 25 m) - Light barriers and safety circuits

Kondisi: bekas, Tahun pembuatan: 2011, Overview This fully automatic palletizing and pallet wrapping system was manufactured in 2011 by the Italian company SIPA / ROBOPAC. The system is designed for palletizing and wrapping PET beverage packs in shrink film. It comprises a complete palletizing line with infeed conveyor, layer formation, interlayer handling, pallet transport, and downstream ring wrapping unit. The system is dismantled, complete, and in good condition. It is available immediately. Technical Data - Capacity: approx. 39 pallets/hour - 2.0 l (3x2): approx. 2,500 packs/hour - 1.5 l (3x2): approx. 2,500 packs/hour - 1.0 l (3x2): approx. 2,600 packs/hour - 0.5 l (4x3): approx. 1,300 packs/hour - Formats: 2.0 l / 1.5 l / 1.0 l / 0.5 l PET shrink packs - Euro pallet (1200 × 800 mm) - Application: Palletizing and wrapping of shrink-wrapped PET bottles Configuration - Palletizer: SIPA GENIUS PTF/1 - Ring Wrapper: SIPA / ROBOPAC HELIX HS30 System Configuration - 1 infeed line - Infeed conveyor system - Layer formation system - Palletizing unit - Interlayer magazine - Interlayer positioning robot with vacuum system - Empty pallet magazine - Pallet conveyor (infeed and outfeed) Iedpfx Apjy Tnz Nevjtg - Ring wrapper (automatic pallet wrapping) - Safety fence - Two control cabinets

Kondisi: bekas, Water degassing (de-aeration) system for removing oxygen from drinking water, predominantly built in 1995. The system operates using a two-stage cold degassing process by means of CO₂ stripping in a counterflow setup and comprises the following components: - 2 serially connected degassing vessels - Vacuum pump with separator - 7,000 L pressurized tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure - Centrifugal pumps Isdpfxjy Ti Ano Apvetg - CO₂ dosing via needle valve - Pipe panel, various pipelines, valves, fittings, measuring and control technology - Control cabinet with Simatic S5 control Machine (additional): Cold degassing by CO₂ stripping; Year of manufacture: 1995–2018 Capacity: 20,000 l/h Degassing vessel volume each: 285 l; operating overpressure up to 1 bar Buffer tank volume: 7,060 l; operating overpressure up to 4 bar Residual oxygen content approx.: 0.010 – 0.015 mg/l Operation / Control: Simatic S5 Material: Stainless steel Assembly: Mounted on a walkable stainless steel frame Equipment: 2 x degassing vessels, pressurized tank, centrifugal pumps, vacuum pump with separator, CO₂ dosing (via needle valve), flow, pressure and level measurement, control cabinet, pipe panel, various pipelines, valves, and fittings.

Kondisi: bekas, translation_de_hu_01 Isdpfxey Tizws Apvetg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Z00004955, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, Professional essential oil and hydrolate extractor manufactured by Albrigi Luigi S.r.l., model DRAGO PRO 250L. Machine designed for steam distillation of medicinal plants, aromatic herbs, flowers and other botanical raw materials. The unit is in excellent condition, fully operational, very lightly used and carefully stored. Main technical data Manufacturer: Albrigi Luigi S.r.l. Model: DRAGO PRO 250L Type: essential oil extractor / steam distillation unit Capacity: 150–250 liters Year of manufacture: 2019 Power supply: 380/400 V Phases: 3-phase Frequency: 50/60 Hz Power: approximately 18.75 / 19 kW Frame: stainless steel Machine mounted on wheels User and maintenance manual available CE marking present CAREL humiSteam x-plus system visible on board Condition of the machine Machine in very good overall condition, operational, and has seen minimal use. Stored in suitable conditions. Shows normal cosmetic signs of use without affecting functionality. Reason for sale Selling due to discontinued use following a change in production line. Available for inspection by appointment. Additional photos, videos and technical documentation available on request. Sale with regular invoice. Isdpfxsy S A S Te Apvetg

Kondisi: bekas, Tahun pembuatan: 2013, nomor mesin/kendaraan: LC634, Used BERTOLASO Epica Line for Spirits, Glass & PET - 12,000 bph Technical Specifications & Performance Data This complete used bottling line is centered around a Bertolaso Epica 32/32/8 monobloc for rinsing, filling, and capping. Designed for mixed container handling, it supports both flask-shaped and round bottles made of glass and PET. The line operates at up to 200 bpm (approx. 12,000 bph depending on format) and is equipped with a wet-glue labelling system for front and back labels. The components cover all critical packaging stages from depalletizing to case erecting, packing, and sealing, with integrated printing and inspection technologies. Itjdpsy Szcwjfx Apvog Production speed: up to 200 bpm (format-dependent) Filling system: vacuum filling Bottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottles Containers: Designed for PET and glass bottle handling; supports flask and round shapes Core monobloc: Bertolaso Epica 32/32/8 (rinsing/filling/capping) Labelling: Wet glue, front and back application (Cavagnino & Gatti C4810) Inspection: Fill level control (Logilevel plus) End-of-line: Case packer, case sealer, case coder, spiral elevators Power supply: 415 V / 50 Hz primary (with 240 V / 50 Hz devices where indicated) Key models/years: 1994–2022 across subsystems Advanced Automation & Control Systems The line integrates automated handling and quality control for consistent beverage production. The Bertolaso monobloc provides synchronized rinsing, filling, and capping with centralized control for format management. The Logilevel plus inspection system supports automated fill level checking to ensure product quality. Conveyors, carton handling, and the labelling station operate with coordinated start/stop logic, enabling a uniform, continuous flow along the entire production line. The electrical architecture is standardized at 415 V / 50 Hz, with auxiliary equipment at 240 V / 50 Hz for easy integration into common industrial power grids. Operator access and changeover points are optimized for efficient format changes. Line Integration Capabilities This used industrial packaging solution offers fully in-line operation from bottle depalletizing through to finished case handling. It is configured for PET and glass containers, including flask-shaped and round bottles, and suitable for multiple small bottle formats from 0.1L to 0.5L. Integrated conveyors link each module, while case erectors, packers, sealers, and coding ensure complete end-of-line packaging. The wet-glue labeller supports dual-sided (front/back) application to meet branding and presentation requirements. Spiralveyor equipment supports elevation changes and compact layouts. Machine Condition & Maintenance History This used bottling line consists of components manufactured between 1994 and 2022, with...

Kondisi: bekas, Tahun pembuatan: 1996, nomor mesin/kendaraan: LC635, Gebrauchte STORK Glasabfüllanlage für Spirituosen, 12.000 Fl/h – Formflaschen / konisch Technische Spezifikationen & Leistungsdaten Diese komplette, gebrauchte Glas-Abfülllinie ist um ein Stork Rinser–Füller–Verschließer-Monoblock mit Vakuumfüllung aufgebaut und wird durch eine Nassleim-Etikettiermaschine für Vorder-, Rücken- und Hals-Etiketten ergänzt. Sie ist eine industrielle Zweitverpackungslösung, konzipiert für effiziente Getränkeproduktion mit runden, geformten und konischen Glasflaschen. Linientyp: Komplette Glasflaschenabfülllinie Produktionsgeschwindigkeit: 200 Flaschen/min (ca. 12.000 Flaschen/Stunde) Flaschenformen: Rund, geformt, konisch Formate: Kompatibel mit 0,35 l, 0,7 l, 0,75 l, 1,14 l-Flaschenformaten Behältertyp: Für Glasflaschen Füllprinzip: Vakuumfüllung Etikettierung: Nassleim-Etikettierer für Vorder-, Rücken- und Halsetiketten Stromversorgung: 415 V / 50 Hz für den Großteil der Ausrüstung; ausgewählte Komponenten mit 240 V / 50 Hz Wesentliche Anlagen und Modellangaben: - Depalettierer: Osmeka VAE (1996) - Rinser-Füller-Verschließer Monoblock: Stork RVR30/146-36-9 LW (1996) - Etikettierer: Cavagnino & Gatti CG84CL3/18 (Nassleim) - Laner: Stork SIE1500PB3 (1996) - Kartonpacker: Stork (1996) - Kartonverschließer: 3M 800 Afe (1998) - Kartonaufrichter: Bortolinkemo mit Nordson Heißleim-Applikator (2013) - Kontrollwaage: Logics & Control Logiweight LS (2016) - Spiral-Kartonaufzüge: AmbaFlex SpiralVeyor SV (2022 und 2013) Fortschrittliche Automatisierungs- & Steuerungstechnik Die Linie integriert automatisiertes Flaschenhandling, synchronisierte Fördertechnik und abgestimmte Steuerungen für Depalettierung, Spülen, Füllen, Verschließen, Etikettieren sowie die Endverpackung. Das Monoblock-System gewährleistet präzise Vakuumfüllung für gleichbleibende Füllstände in Glasflaschen. Die Nassleim-Etikettierstation appliziert Vorder-, Rücken- und Halsetiketten bei Volllast. Zusatzausrüstung wie das Nordson Heißleimsystem am Kartonaufrichter sowie die Logiweight Kontrollwaage sorgen für eine zuverlässige, datenbasierte Qualitäts- und Verpackungskontrolle. Die elektrische Ausführung ist überwiegend auf 415 V / 50 Hz (schwere Maschinen) bzw. 240 V / 50 Hz (Kontrollwaage) ausgelegt. Linienintegration & Anpassungsfähigkeit Für eine nahtlose Inline-Produktion ausgelegt, beinhaltet diese gebrauchte Abfülllinie einen Laner zur Linienführung und Spiral-Kartonaufzüge für den vertikalen Transport, um den Platzbedarf zu optimieren und den Durchsatz konstant zu halten. Formatwechsel sind für Glasflaschen von 0,35 l bis 1,14 l und verschiedene Geometrien (rund, geformt, konisch) möglich. Die Systemintegration umfasst sämtliche Prozessstufen von der Depalettierung über das Aufrichten, Verpacken, Verschließen und Wiegen der Kartons – für eine komplette industrielle Verpackungslösung in der Getränkeherstellung. Itodpfoy Szb Hjx Apvog Maschinenzustand & Wartungshistorie Dieses gebrauchte Abfülllinien-Set besteht aus Komponenten der Baujahre 1996 bis 2022 und wurde kontinuierlich gewartet und modernisiert. Die Linie wird als komplette, gebrauchte Lösung angeboten, die in der Getränkeproduktion wieder in Betrieb genommen werden kann. Das Herzstück – das Stork Monoblock – stammt von 1996; weitere End-of-Line-Elemente (z. B. Aufrichter, Kontrollwaage) wurden in den Folgejahren ergänzt bzw. modernisiert.

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 3.500 h, nomor mesin/kendaraan: LC636, Used KHS Innofill Can Line 16,000 CPH – Year of Manufacture 2018 Technical Specifications & Performance Data This complete used filling line is a second-hand can filling system, centered around a KHS filler block and integrated with high-quality upstream and downstream packaging technology. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans. Production speed: up to 16,000 cph (cans per hour) Main filler: KHS Innofill Can C (2018) Can seamer: Ferrum FC03 (2018) Depalletizer: SKA Fabricating Can-I-Bus Inspection system: Heuft fill level detector Rinser: AV-C500 can air rinser Dryer: Air Control Industries can dryer Labeler: Pack Leader (Advanced Dynamics system) Carton packer: Atlanta Rafaello 726 Itodpfxjy Szbye Apvog Carton coding: SATO S86-EX printer Conveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PC Utilities/peripherals: Conveyor lubricator (Loewados) Container type: Aluminium cans Documentation: Printed manuals included Advanced Automation & Control Systems The line features separate control cabinets for conveyors and labelling, supporting coordinated start/stop logic and gentle product handling. The KHS Innofill Can C filler block provides a modern automation architecture with line-friendly integration, recipe management, and synchronized drives for consistent filling and seaming processes. Safety locks and protective devices are installed at key points to protect operators and ensure process reliability. Production Line Integration Capabilities This packaging line offers end-to-end integration from depalletizing to cartoning, enabling seamless can flow through rinsing, filling, seaming, inspection, drying, labelling, and secondary packaging. Modular conveyors from KHS, AE Conveyors, and KBR enable balanced buffering and stable transfers, helping to maintain throughput at rated capacity. The setup is suitable for a wide range of beverage productions and can be adapted to various aluminium can sizes with suitable change parts and format guides. Machine Condition & Maintenance History As a used filling line, the core equipment includes a KHS Innofill Can C filler and a Ferrum FC03 seamer from 2018. The inventory list shows a complete, matched set of stations with available printed manuals, supporting commissioning, maintenance, and spare parts management. The line is presented in functional condition and is ready for operation, subject to normal site preparation and utility connections. Operational Performance & Versatility Designed for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automatic feeding, a...

Kondisi: bekas, Tahun pembuatan: 1996, nomor mesin/kendaraan: LC633, Used STORK miniature line for glass & PET, 200 BPM Technical Specifications & Performance Data This used filling line is designed for miniature formats and optimized for highly efficient beverage production. Configured specifically for 50 ml bottles, it handles both PET and glass containers and supports various shapes, including flask, oval, and round. The core of the line is a Stork rinse–fill–cap monoblock with a 36-head rinsing/filling carousel and a 9-head capping turret. Downstream equipment includes a Krones Autocol self-adhesive labeller with 3 stations for front and back labelling, integrated inspection and rejection systems, plus a complete packaging solution for carton erecting, packing, sealing, coding, and conveying. Itedpfx Apey Sxgmjvsg Production speed: 200 BPM (miniature bottles 0.05L) Filling type: Vacuum filling Bottle formats: Compatible with 0.05L bottles Containers: Designed for PET and glass Bottle handling Supported shapes: Flask, oval, round Monoblock configuration: 36-head rinser/filler, 9-head capper Closures: ROPP, closure sizes 18×12 and 20×12 Labelling: Krones Autocol, 3 stations, self-adhesive front and back Inspection: Fill level control with carton rejection, checkweigher, scale test End-of-line: Carton packer, carton sealer, carton coder with rejection, carton erector Electrical: 415 V / 50 Hz (main equipment), 240 V / 50 Hz (auxiliary equipment) Key model references: Logilevel HF1400, Logiweight LS, Autocol, U375, C890, 800AF-E, Spiralveyor SV Manufactured by: Stork (core monoblock); main components by Krones, Garvens, Linx, 3M, Kettner, Ambaflex Advanced Automation & Control Systems The line features upgraded automation with a new PLC/HMI installed in 2021 on the Stork monoblock, providing enhanced diagnostics, recipe management, and process stability. Integrated inspection modules provide fill level control and automatic rejection, while the checkweigher and scale test guarantee consistent fill accuracy for 50 ml packs. The electrical distribution supports mixed voltages with 415 V / 50 Hz for primary machinery and 240 V / 50 Hz for secondary systems. Format parts and synchronised conveyors enable rapid changeovers between miniature flask, oval, and round shapes. Production Line Integration The system is designed as a complete packaging solution from bottle infeed to carton handling. A stainless-steel buffer tank and bottle conveyor stabilise product and container flow at the entry point. The Krones Autocol labeller integrates seamlessly for precise application of self-adhesive labels on miniature bottles. Downstream, a coordinated end-of-line area handles carton packing, sealing, coding with rejection, carton erecting, and a spiral conveyor for efficient elevation transfer...

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 19-6-1, Perlengkapan: dokumentasi / manual, Komplette Craft-Brauereianlage Wir bieten eine vollständige und voll funktionsfähige Ausrüstung für eine kleine Craft-Brauerei in erstklassigem Zustand zum Verkauf an. Die Anlage befindet sich in der Slowakei. Wir können einen sorgfältigen Abbau und das Verladen der Technik arrangieren. Ausführliche technische Dokumentation ist vorhanden. Grundspezifikationen: Sudhaus - 4-Gefäß-System (Maische-/Würzpfanne, Läuterbottich, Whirlpool, Heißwassertank) - Netto-Würzvolumen pro Sud: 1.000 l - Anzahl der Pumpen: 3 - Abluftschornsteine aus Edelstahl - Erwärmung der Würzpfanne: Dampf (zwei Kreise: 1. Boden, 2. Mantel) - Erwärmung Heißwassertank: Dampf - Wärmedämmung der Gefäße - Gefäßbeleuchtung - Rührwerk in der Würzpfanne mit Geschwindigkeitsregler - Treberharke im Läuterbottich - Steuerungseinheit - Arbeitsbühne und Treppe aus Edelstahl Dampferzeuger - Gasbeheizt - Leistung: 120 kg Dampf / h - Dampftemperatur: 170 °C - Wassertank: 40 l Malzwaage - Plattformwaage CAS DB2 - Max. Tragkraft: 150 kg - Teilung / Genauigkeit: 50 g - Plattformmaße: 460 x 570 mm Malzmühle - Elektrische Walzenmühle mit Spalteinstellung - Leistung: 600 kg / h - Trichtervolumen: 150 l - Anschlussspannung: 380 V - Motorleistung: 2,5 kW - Drehzahl: 1.400 U/min Gärtanks (Fermenter) - 8 Stk. Gär- und Lagertank, zylindrokonisch, stehend, mit Kühlmantel und Isolierung (CCT) - Gesamtvolumen: 1.200 l - Nutzvolumen: 1.000 l Isdpfx Asy Sv Hkopvjtg - Max. Betriebsdruck: 1,5 bar - 2-Kreis-Kühlmantel - Mannloch (Inspektionsöffnung) - Druckhaltesicherheitsventil - Spundventil mit Manometer - Drehbare CIP-Sprühkugel - Temperatursensor - Bierzu-/-ablaufventil - Probierhahn Kaltwassertank (CWT) - Stehender Tank mit Kühlmantel und Isolierung - Volumen: 2.000 l Plattenwärmetauscher zur Würzkühlung - Kapazität: 500 l / h - Anzahl der Arbeitsplatten: 21 - Arbeitsplattenfläche: 0,09 m² - Gesamtwärmeaustauschfläche: 1,89 m² Kühlsystem für Kaltwassertank und Gärtanks - Zwei Einheiten (Innen- und Außeneinheit) - Kühlleistung: 10,6 kW - Kühlmedium: Mono-Propylenglykol/Wassergemisch - Kältetank-Volumen: 200 l - Anschlussspannung: 380 V - Leistungsaufnahme: 4,5 kW - Steuerungseinheit für Tankkühlung CIP-Station - Anzahl Behälter für Reinigungsmittel: 2 - Volumen pro Behälter: 100 l - Anschlussspannung: 380 V - Heizleistung: 4 kW - Pumpenmotorleistung: 0,75 kW KEG-Wäsche und -Füller - Leistung: 10 KEGs / Stunde - Anschlussspannung: 380 V - Heizleistung: 3 kW - Pumpenmotorleistung: 0,45 kW Flaschenfüller - Halbautomatischer Flaschenfüller für 0,33 l und 0,5 l Flaschen - Leistung: 200 Flaschen / Stunde - Anschlussspannung: 220 V

Kondisi: bekas, Tahun pembuatan: 2001, overview This Wrap-Around Packaging Machine 420/50, manufactured by Kisters Maschinenbau in 2001, is designed for high-speed secondary packaging of single-use PET bottles in beverage bottling plants. The machine was previously used for packaging PET bottles and achieves a nominal output of up to 50,000 bottles per hour. The machine was decommissioned because the PET bottle and can filling lines now share a joint packaging area. With 16,976 operating hours, the machine shows a relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can handle tray packs, wrap-around packs, cluster tray packs, as well as full carton and fully enclosed carton formats. The format range covers multiple bottle sizes, including 0.33 l, 0.355 l, and 0.5 l, with packaging configurations such as 2x12, 4x6, 3x8, 3x4, 4x5, and 6x4. This makes the machine a flexible packaging solution for breweries, soft drink producers, and beverage companies processing PET single-use bottles in medium- to high-capacity production environments. Technical Details Manufacturer: Kisters Maschinenbau GmbH Model: Wrap-Around Packer 420/50 Isdpfxoy Sidvo Apvetg Machine Type: Wrap-Around Packer / Secondary Packaging Machine Year of Manufacture: 2001 Capacity: up to approx. 50,000 bottles/hour Operating Hours: 16,976 h Application: Packaging of single-use PET bottles Previous Use: PET beverage filling line Current Status: Decommissioned due to plant restructuring Bottle Formats: 0.33 l, 0.355 l, 0.5 l Supported Packaging Types: tray packs, wrap-around packs, loose wrap-around packs, 90° tray packs, cluster tray packs, full carton/fully enclosed carton packs, export tray formats Packaging Configurations: 2x12, 4x6, 3x8, 3x4, 4x5, 6x4, incl. shrink application for trays Listed Formats: - 0.33 l LNB 2x12 tray - 0.355 l LN 2x12 tray - 0.33 l LNB 4x6 tray - 0.355 l KN 4x6 tray - 0.33 l LNB 3x8 tray - 0.355 l LN 3x8 tray - 0.5 l LN 4x6 tray - 0.5 l LN 6x4 tray - 0.5 l LN 4x6 KLW full carton - 0.33 l LN 4x6 loose wrap-around - 0.33 l LNB 4x6 90° tray - 0.355 l LN 4x6 90° tray - 0.33 l BA 4x6 loose wrap-around - 0.33 l BA 3x4 loose wrap-around - 0.33 l Miller 4x6 loose wrap-around - 0.33 l Salitos 4x6 loose wrap-around - 0.33 l Vichy 4x6 tray set - 0.33 l LN 4x6 tray cluster - 0.33 l LN LCE 4x6 full carton - 0.33 l EW 4x6 export full carton - 0.33 l EW 4x6 export tray - 0.5 l EW 4x5 loose wrap-around

Kondisi: bekas, Tahun pembuatan: 2012, de_hu_brauereianlage Itsdpfsy Sic Sex Apveg

Kondisi: bekas, Tahun pembuatan: 2006, OVERVIEW This Tetra Pak Tetra Fino Aseptic Filling Line was manufactured in 2006 and is designed for filling UHT milk and other liquid food products into pillow-shaped aseptic cartons (Tetra Fino® 1000-ml format). The system allows aseptic filling of ultra-high temperature treated products, ensuring extended shelf life without the need for refrigeration. With a capacity of approx. 3,600 packs per hour, the machine is suitable for small to medium-scale dairy production. The line comprises a pouch forming and filling machine, conveyor systems, and a carton sealing module, with packaging into cartons performed manually. The line is currently in operation and, according to the owner, is in good condition. Ijdpfxey Sh Tvo Apvjtg TECHNICAL DETAILS Manufacturer: Tetra Pak Machine type: Aseptic Carton Filling Line (Pillow-Pack) Format: Tetra Fino Aseptic 1000 ml Year of manufacture: 2006 Operating hours: approx. 18,625 h Output: approx. 3,600 packs/h Filling stations: 1 Filling system: tbc Filling method: Aseptic filling Product: UHT milk (example: 137 °C / 4 sec.) Suitable for liquid foods EQUIPMENT - Aseptic filling machine (pouch forming from reel) - Conveyor system for conveying the packs - Conveyor system for carton handling - Manual packing station (pouch to cartons) - Automatic carton sealing module (SOCO system, year 2014, approx. 740 operating hours) - 1 m wire mesh conveyor (discharge for full cartons) - Reel transport trolley (for heavy packaging reels) - Aseptic filling valves (ABC valve)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, kapasitas tangki: 700 l, This listing offers a compact brewery as a complete package—ideal for getting started right away! The setup has been in use in this configuration since 2022 and is exceptionally well maintained. Plug & play—no complex installation required. Simply plug in and start brewing! Brewiks 500 Two-Vessel Brewhouse * Electrically heated with 36kW—can also be operated at 18kW * 760-liter brew kettle, lauter tun with 840-liter capacity * Designed for grist charges up to 190kg and 640L cold wort * Brewing control via touch interface with recipe management, automatic mashing program, timer function, and manual mode * Sparge water is heated via integrated heat exchanger * Wort cooling is also integrated! * Includes steam condenser * Manufacturer offers expansion for double batches—increases efficiency! * Version with removable side arm—allows upright transport through relatively narrow doorways Speidel Cylindroconical Tanks (CCTs) Itsdpjy Shzgofx Apveg * 2.5 bar test pressure * 3 units at 625L each * 1 unit at 240L * Jacket-cooled * Supplied with full accessories plus additional taps for clear run-off Kreyer Chilly 35 LT chiller unit Sommer Piccolo malt mill Including mobile frame and bagging chute Bottle Guard counter pressure filler 2-head Including rinser Ercole electric crown capper Godex label printer + rewinder Manual Flexlabeller Various further accessories and small equipment, KEGs including filling technology, etc. available on request.

Kondisi: bekas, Tahun pembuatan: 2015, Overview This compact brewing, fermentation, and filling plant was manufactured by various European producers between 2015 and 2022. The plant is designed for beer production in bottles and cans, and consists of an isobaric filling unit, a can seamer, a small brewhouse, fermentation tanks, a cooling unit, a labeling machine, and stainless steel kegs. The plant has already been dismantled and stored, and is available immediately. Technical Specifications Application: Beer (bottles & cans) Filling type: Isobaric filling & sealing Bottle sizes: 33 cl, 50 cl, 75 cl Bottle output: 350–400 bottles/hour (at −1°C to +1°C, 33 cl) Can sizes: 33 cl, 44 cl, 50 cl Can output: 350–400 cans/hour (at −1°C to +1°C, 33 cl) Brew house wort volume: 650 l Heating: Propane gas Electrical: Single-phase Fermentation & cooling Total fermentation capacity: 9,800 l Stabilization capacity: 2,940 l Ijdoy Sccxopfx Apvetg Dimensions (cooling unit): approx. 1,100 × 930 × 840 mm Scope of Supply Isobaric bottle and can filler | Inox CG | — | — | 350–400 bph/cph Can seamer | — | — | 2022 | New, unused Brewhouse | — | — | 2015 | 650 l, propane gas, agitator Cooling unit | W3/4 | — | 2020 | Multi-control, 4 zones Isobaric fermenter | CEAO Inox | — | 2018 | 650 l, cooling jacket (unit 1) Isobaric fermenter | CEAO Inox | — | 2018 | 650 l, airlock (unit 2) Isobaric fermentation vessel | Construções em Aço Inox | — | 2022 | 650 l, dry-hopping port Isobaric fermentation vessel | Construções em Aço Inox | — | 2022 | 320 l, dry-hopping port Atmospheric fermentation vessel | — | — | 2015 | 650 l, non-insulated Semi-automatic labeller | — | — | 2015 | Wrap-around labels Stainless steel kegs | — | — | — | 50 units, 30–50 l

Kondisi: bekas, Tahun pembuatan: 2011, de-hu-01 Itsdpfjy Sccrox Apvsg

Kondisi: bekas, Tahun pembuatan: 1991, Übersicht Diese isobare PET-Flaschenabfüll- und Verschließmaschine wurde 1991 von der deutschen Firma SEN AG (Seitz Enzinger Noll AG) hergestellt. Die Blockmaschine umfasst eine Zalkin-Verschließmaschine für Schraubverschlüsse und ein Verschlusszuführsystem von Gassner. Sie ist für kohlensäurehaltige Erfrischungsgetränke geeignet. Die Maschine ist nicht mehr in Produktion, jedoch noch angeschlossen. Technische Daten Abfüll- und Verschließmaschine als Blocksystem Anzahl der Füllstationen: 124 Anzahl der Verschließstationen: 20 isobares Füllsystem geeignet für kohlensäurehaltige Erfrischungsgetränke Verschlusssystem: Zalkin für Schraubverschlüsse Verschlusszuführungssystem: Gassner Kapazität: 19.900/h bei 1,5 l Formate: 1,5 l PET und 0,5 l PET Richtung: links-rechts Itsdpfsy Scclsx Apvjg

Kondisi: bekas, Tahun pembuatan: 2001, de_to_hu_it_lt_lv_nb_nl_pl_1 Itodpfx Apoy Scb Ujveg

Kondisi: bekas, Tahun pembuatan: 2001, übersicht-griffapplikator-2001 Isdpfxsy Sccfj Apvstg

Kondisi: bekas, Tahun pembuatan: 2008, 01 Itedpfoy Scb Ijx Apvjg

Kondisi: bekas, Tahun pembuatan: 2001, GIANAZZA Vakuumverdampfer – Anlage zur Mostkonzentration Beschreibung: Professionelle Industrieanlage zur Konzentration von Traubenmost und Fruchtsäften. Hergestellt vom weltweit renommierten italienischen Spezialisten Gianazza Technology, ist dieses System für eine hochwertige Produktion konzipiert und bewahrt durch Vakuumverdampfung bei niedriger Temperatur die organoleptischen Eigenschaften des Produkts. Technische Spezifikationen: Hersteller: Gianazza Technology SpA (Italien) Baujahr: 2001 Itsdpfx Aey R I Dxepveg Material: Edelstahl (hochwertig, Inox) Anlagentyp: Mehrstufiger Vakuumverdampfer Enthaltene Komponenten: * Hauptverdampfersäulen * Komplettes Schaltschrank (digitale PID-Regler) * Pumpstation (Salvatore Robuschi Kreiselpumpen) * Externer Kühlturm / Wärmeübertrager * Edelstahl-Lager-/Puffertank Zustand: Professioneller Industrie-Zustand, regelmäßig in einer Kellerei gewartet. Anwendungsbereiche: Anreicherung von Traubenmost (Zuckerkonzentrierung). Herstellung von Rektifiziertem Traubensaftkonzentrat (RCM). Konzentration von Fruchtsäften.

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, SIPREM INTERNATIONAL PCM 400 Press membran pneumatic kontinuitas profesional untuk pengolahan anggur volume tinggi. Model: Siprem PCM 400 Tipe: Press Membran Kontinu Kapasitas Proses: 32 - 45 ton/jam (anggur segar) Kapasitas Maksimal: Hingga 55 ton/jam (anggur fermentasi) Itedpfx Aey R I Drepvsg Tahun: 2004 Berat: 13.000 kg Kondisi: Kondisi industri sangat baik, sepenuhnya operasional. Keunggulan utama: Berbeda dengan press batch, sistem ini memungkinkan pengolahan anggur tanpa henti selama 24/7 dengan ekstraksi must berkualitas tinggi.

Kondisi: bekas, Tahun pembuatan: 2013, nomor mesin/kendaraan: LC630, Used KHS can filling line for beer – 48,000 CPH Technical Specifications & Performance Data This complete KHS filling line for beer is engineered for high-frequency beverage production and industrial packaging outputs. It is a used filling line configured for aluminum cans, equipped with robust components for depalletizing, filling, preservation, inspection, packaging, and palletizing. The line delivers consistent throughput and quality, designed for large-volume beverage production. Production speed: up to 48,000 cans per hour at 0.5L; 41,000 cans per hour at 0.568L Container types: aluminum cans Formats: compatible with 0.5L and 0.568L can formats Can dimensions: diameter 66.30 mm; height 168 mm Lid specifications: aluminum; diameter 59.44 mm; height 2.07 mm Filling technology: volumetric pressure filling with MID (magnetic-inductive flow meters) Seaming technology: high-speed multi-head can seamer Pasteurization: KHS INNOPRO KZE 250 flash/continuous pasteurizer Inspection: KHS Innocheck CUB monitors fill level and closure First installation: 2013 (stretch wrapper 2020) Manufacturer: KHS Engineering with supplementary equipment from leading suppliers Advanced Automation & Control Systems The line integrates state-of-the-art automation features, as typically found on KHS filling systems, ensuring stable high-speed operation and consistent product quality. Automated lid feeding and distribution support uninterrupted seaming, while inline inspection and coding systems ensure traceability and quality control. - Automated depalletizing, conveying, and palletizing for continuous material flow - Recipe-based operation and quick changeovers for format switches - Inline inspection for fill level and seam integrity - Permanent inkjet coding for batch and date marking - Dynamic weight control for inline verification - Safety guards and interlocks at critical stations Iodpey Rxx Hsfx Apvetg Integration Capabilities in Production Lines This complete packaging machinery setup is designed for cohesive end-to-end operation, from empty can depalletizing to finished pallet unitization. Conveyors and buffers are tuned for high-frequency can handling, while the shrinkpacker and palletizing cell assure reliable downstream packaging performance. - Inline operation with synchronized conveyors: can, pack, and pallet movement - Changeover capability for 0.5L and 0.568L cans - Suitable for beer production and engineered according to best practices for aluminum can handling - Modular integration of depalletizer, filler, seamer, pasteurizer, inspection, shrink packer, palletizer, and wrapper Machine Condition & Maintenance History

Kondisi: bekas, Tahun pembuatan: 2018, Overview This can filling line consists of equipment from Krones, KHS, Ferrum, Kisters, Hein, Strema, and other system components. The line is designed for beverage production in cans with a nominal capacity of approx. 60,000 cans per hour. The main filling and closing section includes a KHS Innofill EMD 108S can filler and a Ferrum F812 can seamer. The system also features modern inspection and handling equipment, including a Krones Checkmat from 2023, several Krones machines from 2018, and a Strema A5000BII from 2021. The line covers all key processes from can handling and filling, seaming, inspection, pasteurisation, through to packaging and pallet transport. Several machines have been modernised or upgraded over time, resulting in a combination of proven core filling technology and newer inspection, packaging, and auxiliary equipment. Technical Data Output: approx. 60,000 cans per hour Container type: Standard cans 500ml & 330ml Condition: Used plant, very good condition, well maintained Application: Beer, carbonated soft drinks Scope of Supply Can depalletiser | Krones | Pressant | Automatic can depalletising system | 2018 Empty can inspection | Krones | Cantronic 709 | 2018 Itsdpsy Rxtqsfx Apvsg Can rinser | Hein | Can rinsing system | 1978 Can filling machine | KHS | Innofill EMD 108S | Can filler for beer and carbonated soft drinks | 1997 Can seamer | Ferrum | F812 | Can seaming machine | 1997 Lid feeding system | CSW | Lid feeding system for can seamers | Year to be confirmed Fill level inspection | Krones | Checkmat 731 | 2023 Tunnel pasteuriser | KHS | Innopas | Tunnel pasteurising system | 2001 Can dryer | Gesete | BasicLine | 2018 Fill level inspection | Krones | Checkmat 707 | Fill level monitoring system | 2018 Tray & shrink film packaging machine | Kisters+ZEVA | 197/60+ST/II-600V; fully overhauled in 2015 | 1992 Grouping station | Krones | Robobox T-GS | Product grouping station before palletising | 2018 Palletiser | Krones | Modulpal | Automatic palletising system | 2018 Pallet wrapper | Strema | A5000BII | 2021 Pallet labelling machine | Logopak | 850 P3 T02 P06 | 2022 Pallet conveyor | Krones | Pallet transport system | 2018 Tray conveyor | Krones | Tray conveyor belts | 2018 Can conveyor | Krones | Can conveying system | 2002 Additional Information The tray and shrink film packaging machine was originally manufactured in 1992 and completely overhauled in 2015. The line combines proven core filling technology with several modern Krones handling and inspection components. It is offered as used, as-is, without warranty.

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 5.000 h, nomor mesin/kendaraan: LC631, Used Tetra Pak TBA19 330 Prisma Line 9000 bph - 2008 Technical Specifications & Performance Data This used filling line is a Tetra Pak A3 Flex V300 configuration, specifically designed for 0.33 L Tetra Prisma cartons and ideal for the second-hand sector within the industrial, packaging, and beverage production industries. Configured for aseptic operation, it allows reliable high-speed packaging for milk and juice applications, consistently maintaining quality and high availability. Itodpfxsy Rriro Apvjg Manufacturer: Tetra Pak Main Filler: TBA 19, Version 300V Production Speed: Up to approx. 7,500 packs/hour Format Compatibility: 0.33 L Prisma (330 ml) Container Type: Carton (Tetra Brik/Tetra Prisma) Year of Manufacture Filler: 2009 Capper: CAP 30 for Dream Cap (YOM 2019) Packing Machine: TCBP 32 Carton Packer (YOM 2012) Peripheral Equipment: Conveyor line, line control, Domino printer, paper cart Aseptic Packaging: Yes (for long shelf-life products) Reported Service Hours: Filler approx. 5,000 h; Packer approx. 30,000 h; Capper approx. 25,000 h Additional Component: Bonino mechanical feeder (2014) — 460 V, 0.70 A, 60 Hz, approx. 0.8 kW Advanced Automation & Control Systems The line features integrated automation for synchronized control of filling, capping, packing, and conveying. The line control coordinates start/stop, speed matching and fault management, while the Domino printer is integrated for inline coding without throughput loss. Interlocks and safety guards protect operating personnel and maintain hygienic integrity during beverage production. Centralized line control with coordinated speed regulation Printer integration for date, batch and traceability coding Safety devices and interlocked protective covers Format-specific setup for 0.33 L Prisma enabling rapid, reproducible changeover Integration Capability in Production Lines Designed as a complete packaging line, it allows seamless integration from aseptic filling to secondary packaging. Conveyors are engineered for gentle handling of cartons and stable product flow to the packer. The platform is optimized for milk and juice applications, supporting consistent sealing, Dream Cap application and case packing for distribution. Inline operation across filler, capper, printer, conveyor, and packer Carton handling tailored to the geometry of 0.33 L Prisma Suitable for milk and juice production processes Downstream case packing via the TCBP 32 Machine Condition & Maintenance History The line was previously used for milk and juice production and is reportedly in a serviced, well-maintained condition. The operating hours indicate regular industrial use typical for used filling equipment. The spec...