Euromix Industry Izmir

Kondisi: sangat baik (bekas), Ofen OMIA SECOMAT V-10 Maximale Temperatur: 160 °C Innenmaße: 1000 x 1000 x 1000 mm Ausgestattet mit 1 kleinem Wagen Spannung: 380 V Breite: 2000 mm Tiefe: 1500 mm Gesamthöhe: 2000 mm Gewicht: ca. 1 T Lrjdozg Hvcspfx Apton MASCHINE IN SEHR GUTEM ZUSTAND

Kondisi: hampir baru (bekas), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation (as new!!) Dyemansion Powershot C Blasting Cabinet Gentle surface cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of manufacture: 2021 The industrial standard for simple and efficient depowdering Automated depowdering increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time required for part cleaning and the personnel needed in your production can be significantly reduced. This increases your efficiency. By investing in automated depowdering with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware features The blast cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Various blasting nozzles and ionization ensure reproducible results. A basket with a soft, exchangeable lining protects the parts from damage during processing. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the contained parts. This configuration guarantees efficient powder removal. High operating comfort with improved ergonomics and process control Experience a new level of process management with touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. Thanks to user-centered design, everything is easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical Data: POWERSHOT C AUTOMATION Individual programming, control, and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200, or almost 1.5x full Stratasys H350 build volume Effective basket volume 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended operating space (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: Output 1kW Requirements: 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Consumption Minimum: 1.4 m³/min at 2.2 bar Maximum: 1.8 m³/min at 5 bar NOISE EMISSION: Sound level < 80dB(A) Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, specifications may vary!) For further questions, please feel free to contact us by phone. Lsdpezgr T Tsfx Aptern

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Bor & Milling EMERSON Ljdpozfpynofx Aptern Model 40 TC Meja Silang Mesin bekas, berfungsi baik Kode internal: SVR 413

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), Tersedia mesin pembersih laser pulsa yang dioperasikan secara manual. Sumber laser: Raycus RFL-P200, daya laser: 200W, media pendingin: air, frekuensi: 50kHz, kecepatan maks.: 10m/s, lebar pembersihan maks.: 50mm. Mesin ini adalah unit demonstrasi dengan jam kerja rendah. Dokumentasi tersedia. Pemeriksaan di lokasi memungkinkan. Lodpfx Apjzfaaxotjrn

Tahun pembuatan: 2023, Kondisi: siap digunakan (bekas), Tersedia unit mesin pembersih ultrasonik HGH. Dimensi ruang X/Y/Z: 600mm/500mm/400mm, dimensi keranjang X/Y/Z: 570mm/470mm/290mm, volume efektif: sekitar 120l, volume tangki: 160l, daya ultrasonik: 1200W. Dokumentasi tersedia. Pemeriksaan di lokasi memungkinkan. Ljdpfjzd Eipox Aptsrn

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), Tersedia mesin sandblasting ruang Poltech dengan aplikasi media sandblast manual. Dimensi ruang sandblast X/Y/Z: sekitar 6000mm/4000mm/3000mm, dimensi luar X/Y/Z: sekitar 14000mm/6500mm/5000mm. Dokumentasi tersedia. Inspeksi di lokasi memungkinkan. Ledpozdkpuefx Aptjrn

Tahun pembuatan: 2008, jam operasional: 21.330 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1013813, Kami menawarkan mesin shot blasting bekas Wheelabrator HB 10/12 untuk komponen cor, tahun pembuatan 2008. Lredezc H Hbepfx Aptjn Produsen: Wheelabrator Tipe: HB 10/12 Nomor seri: 103813 Tahun produksi: 2008 Tegangan nominal: 3 x 400 V Daya nominal: 20 kW Frekuensi nominal: 50 Hz Arus nominal: 40 A Berat modul utama: 4.500 kg (sesuai gambar), bagian tambahan diperkirakan 3.000 kg. Instalasi terdiri dari blok-blok berikut: - Kabin blasting sebagai elemen utama - Instalasi crane di depan - Pagar pengaman - Elevator ember Peralatan dapat dibongkar menjadi 4 unit ini. Dokumentasi lengkap, seperti diagram kelistrikan, gambar teknis, dan manual pengoperasian tersedia dalam bahasa Jerman. Gambar dengan dimensi lihat pada PDF. Seri foto juga terlampir dalam format PDF. Kami juga memiliki video, silakan hubungi kami untuk mendapatkan akses. Pembongkaran peralatan harus dilakukan oleh pembeli. Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Tahun pembuatan: 2023, Kondisi: siap digunakan (bekas), Tersedia mesin Microfinish/Superfinish Thielenhaus untuk pemrosesan akhir permukaan komponen simetris putar seperti poros, camshaft, crankshaft, dan komponen presisi serupa. Area penggunaan: pemrosesan poros, panjang pemrosesan maks.: 750 mm, diameter benda kerja maks.: 100 mm, langkah maks.: 650 mm. Dimensi mesin X/Y/Z: sekitar 2100 mm/1450 mm/2050 mm, berat: sekitar 1800 kg. Termasuk unit band finish SL50, penyedot kabut oli Elbaron RON 60 SV, dan dudukan benda kerja. Dokumentasi tersedia. Inspeksi di lokasi dimungkinkan. Mesin ini hanya digunakan untuk pemrosesan contoh dan hampir tidak pernah dioperasikan. Lredozcyqaopfx Aptsn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Dimensi masuk: lebar maks.: sekitar 2.250 mm, tinggi maks.: sekitar 1.700 mm - Dimensi lorong: lebar maks.: 2.000 mm, tinggi maks.: 1.500 mm - Area peledakan utama lebar: 1.500 mm tinggi: 1.200 mm Ljdpfx Apszcfmgstsrn - Plat: lebar maks.: 2.000 mm tebal maks.: 50 mm tebal min.: 6 mm, ≤ 6 mm hanya pada konstruksi tambahan - Profil: hingga maks. IPB 1.000 - Panjang minimum: sekitar 3.000 mm jika menggunakan rol dengan jarak rol sekitar 1.000 mm Bagian kecil dan ringan, profil datar kecil, plat lebih tipis dari 6 mm, dll serta pipa harus diangkut di atas konstruksi penopang. Kapasitas beban konveyor rol maks.: 1.000 kg/m

Tahun pembuatan: 2018, Kondisi: hampir baru (bekas), OTEC special machining machine SF 170/270/1000 for camshaft bushings For sale is an OTEC special machining machine designed for processing and surface finishing of camshaft bushings. The system is suitable for machining both short and long camshaft bushings and was developed for industrial series production applications. Technical Data: Manufacturer: OTEC Machine type: SF 170/270/1000 Application: Machining and surface finishing of camshaft bushings Machine dimensions: • Length: approx. 2,586 mm Ljdjzb Abxopfx Aptsrn • Width: approx. 798 mm • Height: approx. 1,785 mm • Loading height: approx. 920 mm Weight: • Machine weight: approx. 1,200 kg • Transport weight: approx. 1,400 kg Electrical connection data: • Voltage: 3 x 400 V • Frequency: 50/60 Hz • Fuse protection: 32 A • Connected load: 12.5 kVA • Max. power consumption: 10 kW Compressed air connection: • Operating pressure: 6 bar • Connection: DN 7.2 (R 1/4”) Water connections: • Inlet: 3/4” (Ø 16 mm) • Outlet: 1 1/4” (Ø 31 mm) Workpiece dimensions: Long camshaft bushing: • Length: approx. 177.5 mm • Inner diameter: approx. 89 mm Short camshaft bushing: • Length: approx. 89 mm • Inner diameter: approx. 89 mm Features: • Sturdy industrial design • Compact footprint • Automated machining process • Suitable for series production • Integrated media connections for compressed air and water Location: Germany Inspection possible by appointment.

Kondisi: diremajakan ulang (bekas), Mesin shot blasting, Mesin shot blast meja putar, mesin sandblasting abrasif, mesin perawatan permukaan, Wheelabrator-Berger, Mesin Bekas Produsen: Wheelabrator-Berger Maschinenfabriken GmbH & Co. KG No. Mesin: 8502 No. Pesanan (Kom. Nr.): 80305 Dimensi Keseluruhan Lebar: 2000 mm Kedalaman: 2150 mm Tinggi: 3900 mm Dimensi Kolektor Debu Lebar: 1400 mm Kedalaman: 1270 mm Tinggi: 3500 mm Lredpezbqp Dsfx Aptsn Produsen Kolektor Debu: Abrasiv Spesifikasi Teknis Proses pembersihan otomatis dengan tiupan udara Daya listrik total: 15 kW Poros dan pulley telah direkondisi Dua motor listrik telah dilakukan rewinding

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, tekanan: 58 batang, de-hu-758 Ledjzaqu Dspfx Aptjrn

Kondisi: baik (bekas), 3109 Lrjdpfx Apszaavwoton

Tahun pembuatan: 1989, Kondisi: siap digunakan (bekas), Process: nickel strike, alkaline/cyanide zinc, base material: steel, stainless steel, carrier throughput: approx. 11/h, production time: operating time minus carrier cycle time, drums per carrier: 1, drum internal length: 870 mm, spanner width: 350 mm, average load weight per drum: approx. 37 kg, max. load weight per drum: approx. 50 kg, load weight depends on the geometric surface area of the parts, anode spacing: 650 mm (700 mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heat-up time: approx. 5h from an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, mains water: 2 bar, circulation water: 2 bar, compressed air: 8 bar, drive/control power: approx. 166 kVA, rectifier power: approx. 240 kVA, heating power: approx. 136 kW, extracted air volume: cyan./alk. 12,000 m³/h, acid/alk. 19,450 m³/h, heat to be dissipated: approx. 80,000 kcal/h, the system has been drained of all substances, transformers are free of hazardous materials, full documentation available. Inspection on site is possible. Lrsdpfx Apjy T N Iqoton

Tahun pembuatan: 2018, Kondisi: bekas, Year of manufacture refers to the final acceptance of the system; individual components may differ in age. Workpiece dimensions up to max. LxWxH: 8,000x2,000x2,000 mm. Maximum crossbeam loading: 2,000 kg/carriage. Material: steel. Position 1: Washing cabin, Jumbo-Clean interior made of stainless steel for degreasing/phosphating steel, via automatic or manual lance; Position 2: 1 set of belt filters; Lrjdpfx Aoy T Nzdjptjn Position 3: 1 automatic spray ring for Jumbo-Clean washing cabin, including central lance; Position 4: 1 fresh water treatment unit; Position 5: 1 manual push rail system with 1 electric transverse transfer platform; Position 6: 1 lift/lowering station Jumbo-Lift 2000 integrated into transverse transfer platform; Position 7: 1 direct gas-heated flash-off chamber / powder curing oven / wet paint drying oven, door opening WxH: 2,800x3,100 mm, clear length: 9,500 mm, overall WxHxL approx.: 4,000/5,000/10,000 mm; Position 8: 1 front-end powder extraction unit for on-site paint booth for spraying and drying operations; Position 9: 1 OptiFlex(R)2 manual coating device; Position 10: 1 structure for on-site steel construction; Position 11: control cabinet.

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Lrodpjy Sw Suofx Aptjn

Kondisi: bekas, nomor mesin/kendaraan: 121-1-0-30, Unit panel kontrol dan saklar terpisah, instalasi filter kain nonwoven Ledpfx Ajy Sqiteptsrn

Tahun pembuatan: 2023, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 123168, de-01 Ledsy R Ah Eopfx Aptern

Kondisi: bekas, Pabrikan: Kuderer Maschinenbau GmbH Model: AZ-2 Tahun: 1992 Lodpfx Aey N Nw Rjptern Mesin Gerinda Sabuk Dimensi keseluruhan: 1000 x 440 x 1080 mm Ukuran sabuk: 150 x 1440 mm Daya: 1,5 kW Penghisap Debu Dimensi keseluruhan: 560 x 560 x 690 mm

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Bous_Spritzreinigungsanlage_001 Lredpfx Apoy Nm Utetjn

Tahun pembuatan: 2005, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, We offer this used Technical Nowa Sól OWPS 4.3x3.8x3.0 wheel blast machine, year of manufacture 2005. The machine is fully functional and complete (currently disconnected from power supply) and comes with a dust collector for the blasting chamber. Maximum weight of cleaned workpieces: 250 kN Maximum workpiece dimensions with table rotation and turbine blasting: φ3500×2000 mm Maximum workpiece length without table rotation, pneumatic cleaning: 4300 mm Maximum workpiece width without table rotation, pneumatic cleaning: 3800 mm Maximum workpiece height without table rotation, pneumatic cleaning: 3000 mm Number of throwing turbines: 4 pcs Throwing turbine output: 350 kg/min each Drive power per throwing turbine: 22 kW Recommended abrasive type: cast steel shot or stainless steel shot Recommended abrasive grain size: 0.2–2.0 mm Pneumatic system tank capacity: 200 liters Pneumatic nozzle diameter: 11 mm Compressed air pressure: 0.4–0.6 MPa Compressed air requirement for shot blasting machine: 0.4 m³/h Compressed air requirement for dust collector regeneration: 10 m³/h Compressed air requirement for pneumatic cleaning: 8 m³/h Dust collector type: dry bag filter with pulse-jet compressed air cleaning Installed power (excluding dust collector fan): 130 kW Supply voltage: 400/230 V Frequency: 50 Hz For any questions or if you require further information, please send us a message or contact us by phone. Lodsy I Rq Nepfx Aptorn

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), 1 x Mesin Pencuci Komponen Lodpfx Asy I Nr Eeptjrn Malmkvist Turbex 2000 Tahun pembuatan: sekitar 2000 Dengan pemanas 3 program yang dapat dipilih - Mencuci + mengeringkan - Mencuci - Mengeringkan Waktu cuci dan kering dapat diatur. Dalam kondisi sangat baik. Data Teknis: Berat muatan maksimum: 20 kg Diameter drum: 400 mm Panjang drum: 500 mm Daya pemanas: 6 kW untuk blower udara kering dan media pencuci Suhu dapat diatur 0 - 80°C Aksesori: 3 x keranjang cuci dengan 3 diameter lubang berbeda (1,5/2,5/5 mm) + Rak (buatan sendiri) 1 x conveyor roller dengan lereng pengisian dan pengosongan Manual operasi + skema kelistrikan Mesin dapat diuji dengan listrik.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 400 mm, tinggi total: 690 mm, panjang total: 600 mm, berat keseluruhan: 45 kg, jenis penyesuaian ketinggian: listrik, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, kebutuhan tinggi: 900 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, frekuensi input: 50 Hz, jenis laser: laser serat, The LAS 22 is a compact tabletop unit with a small working area, making it ideal for small components or, for example, nameplates. Thanks to its compact design, the system is highly practical and can be used anywhere. The unit is very easy to operate and requires no programming knowledge. With its powerful laser software, you can create text, numbers, 2D codes, QR codes, and logos with just a few clicks—all without extensive programming skills. The software can automatically increment serial and article numbers after prior configuration. Additionally, it can read data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Use of a hand scanner is also possible. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Lodpfx Aey I Nbmjptjrn - Fiber laser 30 watt (optional: 20 watt, 50 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: exhaust system (incl. activated carbon filter) - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Kondisi: baik (bekas), Instalasi sandblasting kecil Dimensi dalam: 1,2 x 1,2 x 0,6 m (P x L x T) Ljdpfx Apoy H Idwotern Tekanan sambungan: 8 bar Dilengkapi dengan sistem penghisap, meja pemuatan, dan suku cadang (lihat gambar) Atas permintaan, transportasi dan pemuatan dapat diatur ke seluruh Eropa dengan biaya tambahan. Harga belum termasuk PPN. Inspeksi dapat dilakukan dengan perjanjian sebelumnya. Silakan hubungi kami, tim kami siap membantu Anda. Pembelian / Penjualan mesin PEMBELIAN / PENJUALAN MESIN PRODUKSI & MESIN PENGOLAHAN LOGAM, MESIN PERKAKAS, DLL. Apakah Anda membutuhkan mesin berkualitas tinggi dengan harga terjangkau untuk produksi Anda? Atau ingin menjual mesin Anda? Untuk informasi atau kontak lebih lanjut, Anda dapat menghubungi kami melalui formulir kontak.

Tahun pembuatan: 2017, Kondisi: baik (bekas), We are selling our etching line for magnesium and zinc, consisting of: - STOMA Etching Machine E-90L - STOMA Developing Machine 18L - STOMA Preparation & Pre-treatment Tank - STOMA Extraction Hood 90L All components were purchased new in 2017. The STOMA ECOLINE etching machines are largely constructed from V2A stainless steel. The machine enclosure is bolted together. ECOLINE etching machines feature a separate control console, providing added flexibility. A powerful AC drive motor ensures reliable operation. The machines are supplied without a pre-installed extraction system or fan. Ledpfxey H D Acj Aptsrn In the standard version, the machine is equipped with a connection for direct water cooling. Bath volume: 90 liters, Maximum plate size: 50 x 65cm, Weight: 450kg, Dimensions (LxWxH): 1315 x 1430 x 1310mm. - Suitable for magnesium and/or zinc - Maximum plate size: 50 x 65cm - Bath volume: approx. 90L - Supply voltage: 3x 400V - Total space requirement: approx. 2 x 2.5m STOMA Preparation Tank: - Maximum plate size: 50 x 65cm - Water connection: R ½“ - Space requirement: 200 x 95cm - Drain pipe: Ø 50mm STOMA Developing Machine 18L - Maximum plate size: 50 x 65cm - Approx. 18L