Reinhard Klein - Maschinenhandel

Kondisi: baik (bekas), Tahun pembuatan: 1994, jenis kontrol: Kontrol CNC, produsen pengendali: Siemens, model controller: 840 D, Diameter pipa (maks.): 168 mm, Sudut pembengkokan (maks.): 190 °, radius pembengkokan (maks.): 700 mm, radius tekuk (min.): 80 mm, berat keseluruhan: 32.000 kg, lebar total: 2.700 mm, tinggi total: 2.450 mm, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle: +/- 190° Dimensions (LxWxH): 11.9 x 2.7 x 2.45 m Approx. machine weight: 33 t - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A Gksdpoxnlhajfx Adqec The machine is fully automatic and equipped with a tool changer. The following tools are included: Pipe Ø 48.3 mm; Radius 105 mm Pipe Ø 60.3 mm; Radius 120 mm Pipe Ø 63.5 mm; Radius 150 mm Pipe Ø 76.1 mm; Radius 190 mm Pipe Ø 88.9 mm; Radius 222 mm Pipe Ø 114.3 mm; Radius 285 mm Pipe Ø 139.7 mm; Radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe Ø 168.3 mm; Radius 420 mm There were a few mandrels with direct engravings, which had the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following mandrel outside diameters have been measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package has a value of approximately €150,000.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, nomor mesin/kendaraan: 0100-0149-2024, berat keseluruhan: 700 kg, panjang total: 3.500 mm, lebar total: 1.100 mm, tinggi total: 1.500 mm, DATA TEKNIS & PERLENGKAPAN: Cocok untuk material datar Gsdpfxsxm Symo Adqekc Panjang kerja: sekitar 2500 mm CATATAN PENGAMBILAN: Pengambilan harus dilakukan secara tegas antara 10 dan 12 Desember FCA Winterlingen, dimuat ke truk

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1998, nomor mesin/kendaraan: 7385, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, produsen pengendali: Transfluid, model controller: IPU 20, Diameter pipa (maks.): 648 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 3 mm, Sudut pembengkokan (maks.): 180 °, radius pembengkokan (maks.): 125 mm, radius tekuk (min.): 50 mm, lebar kerja: 6.000 mm, panjang mandrel: 5.500 mm, jumlah sumbu: 3, tinggi kerja: 1.300 mm, panjang meja: 7.000 mm, lebar meja: 900 mm, tinggi meja: 1.300 mm, berat keseluruhan: 1.000 kg, panjang total: 7.000 mm, lebar total: 900 mm, tinggi total: 1.300 mm, daya: 5 kW (6,80 hp), tegangan masuk: 400 V, arus masuk: 25 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, kapasitas tangki oli: 1.320 l, tekanan kerja: 200 batang, Perlengkapan: dokumentasi / manual, henti darurat, Perangkat lunak pembengkokan memerlukan pembaruan baru. Mandrel pembengkok tersedia, alat pembengkok tidak termasuk. Gkjdpexcxupefx Adqsc

Kondisi: baru, Tahun pembuatan: 2025, Pipe diameter: 48.3 mm Wall thickness: 3.25 mm Bending radius min./max.: 180 mm Bending speed: 20°/sec Total power requirement: 2.4 kW Machine weight: approx. 700 kg Space requirement: approx. 3880 x 800 x 1250 mm TUBOMAT complete system – length: 3000 mm Standard Equipment for Bending • Electronic Siemens SIMATIC control • Function selection and operation via 4.3” touch panel • Proven 4-position bending angle preselector or program mode • 80 memory locations for up to 10 sets • Actual/target value display for bending angle • Compact, extended bending head • Optimized tooling concept • Hydraulic bending drive, operated via proven manual lever • Hydraulic tube clamping • Hydraulic pressure die adjustment Gkjdpsxcuiisfx Adqec • Hydraulic mandrel retraction • Mobile machine for flexible operation Sawing unit for optimal, right-angle cuts • Saw position visualized via line laser • Foldable saw guard • Adjustable saw feed Deburring unit for internal and external deburring Universal base mount as a drive unit for installation attachments • With swiveling device for optimal accessibility Including optional equipment: - 6 each length and angle stops included – length: 3000 mm - 2-axis positioning display for length and rotation (displayed on the touch panel) – length: 3000 mm - Early mandrel retraction to optimize bend quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment continuously programmable up to 10° - Automatic mandrel lubrication as minimum-quantity oil lubrication - TUBOLUB Z-M (5 liters/container) for minimum-quantity lubrication - Interface for network integration and data import from PIPEFAB - Assembly adapter for cutting ring assembly with measuring system (automatic pressure adjustment) - Software: PIPEFAB 4.0 BE basic pipe bending software package • Oracle Express database for single workstation use • Create isometrics (single tube) • ConCSVImp – import interface for CSV format • Calculation of bending data taking springback, elongation, and rebound into account • Checking of clamping lengths, start and end lengths • Output of bending data (printout) • BendSim – bending simulation and graphical display via parametric tool design • BendCon – creation and transfer of NC bending data for TUBOMAT - IsoTools – 3D display, labeling tools - ConSTEP – import interface for STEP format - Tool holders - Bending tools consisting of bending roller, clamp die, and pressure die (fixed) - Mandrels, 3000 mm for steel pipes, design with lubrication channel for minimum-quantity oil lubrication - Pre-assembly nozzle - Counterholder plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel pipes - Commissioning - Packaging costs

Kondisi: baru, Tahun pembuatan: 2025, Pipe diameter 48.3 mm Wall thickness 3.25 mm Bending radius min./max. 180 mm Bending speed 20 °/sec Total connected load 2.4 kW Machine weight approx. 700 kg Required installation space approx. 3880 x 800 x 1250 mm TUBOMAT total system length 3000 mm Basic Equipment for Bending • Electronic Siemens SIMATIC control system • Function selection and operation via 4.3-inch touch panel • Familiar 4-way bending angle preselection or program operation • 80 memory locations, up to 10 sets • Actual/target value display for bending angle • Compact, forward-extended bending head • Optimized tooling concept • Hydraulic bending drive, operated by proven hand lever Gedpfsxcuicex Adqekc • Hydraulic tube clamping • Hydraulic sliding piece adjustment • Hydraulic bending mandrel retraction • Mobile machine design for flexible use Sawing Unit for Precise Right-Angle Cuts • Saw position display via line laser • Folding saw protection cover • Adjustable saw feed Deburring Unit for Internal and External Deburring Universal Base Mount as Drive Unit for Assembly Attachments • Swivel mechanism for optimum accessibility Including optional equipment: - Includes 6 length and angle stops each - length 3000 mm - 2-axis position display for length and rotation (displayed on touch panel) - length 3000 mm - Early mandrel retraction to optimize bend quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment programmable in steps up to 10° - Automatic mandrel lubrication as minimum quantity oil lubrication - TUBOLUB Z-M (5 liters / container) for minimum quantity lubrication - Interface for network connection and data import from PIPEFAB - Assembly attachment for cutting ring assembly with measuring system (automatic pressure adjustment) - Software – PIPEFAB 4.0 BE Basic Tube Bending Software Package • Oracle Express database for single workstation use • Creation of isometrics (single tube) • ConCSVImp – Import interface, format: CSV • Calculation of bending data considering springback, elongation, and rebound • Checking of clamping lengths, starting and ending lengths • Output of bending data (printout) • BendSim – bending simulation and graphical display via parametric tool design • BendCon – generation and transfer of NC bending data for TUBOMAT - IsoTools – 3D representation, labeling tools - ConSTEP – interface for importing STEP format - Tool holders - Bending tools consisting of bending die, clamping piece and fixed sliding shoe - Bending mandrels 3000 mm for steel pipes, version with lubricant channel for minimum quantity oil lubrication - Pre-assembly nozzle - Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless-steel tubes - Commissioning - Packaging costs

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Diameter pipa 28 mm Tebal dinding 2 mm Gedjxcuhrjpfx Adqokc Radius tekuk minimum 90 mm Kontrol 3D TubeSoft Slim Kebutuhan daya total 3,5 kW Harga baru saat ini ~ 75.000 EURO

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Diameter pipa 28 mm Ketebalan dinding 2 mm Radius tekuk minimum 90 mm Kontrol 3D TubeSoft Slim Total kebutuhan daya 3,5 kW Harga baru saat ini ~ 75.000 EUR Gkedpfxsxcuhlo Adqoc

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1990, nomor mesin/kendaraan: 260900101013, Diameter pipa (maks.): 42 mm, Panjang pipa (maks.): 3.000 mm, Ketebalan dinding tabung (maks.): 25 mm, radius pembengkokan (maks.): 170 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Aplikasi: Pemrosesan pipa yang dapat dibengkokkan, pipa persegi panjang, batang bulat, serta pipa kotak DETAIL TEKNIS Diameter pipa: 42 mm Ketebalan dinding: 25 mm Diameter baja bulat maks.: 20 mm Pipa bahan kotak: 25 x 25 mm Radius tekuk dalam maks.: 20 mm Radius tekuk luar maks.: 170 mm Arah pembengkokan: kiri Panjang tarik pipa: 3.000 mm Kontrol: perangkat lunak RC 7000 Pemrograman: manual Pengoperasian: melalui panel kontrol DETAIL MESIN Berat mesin: 2,8 t Dimensi panel kontrol: 800 x 700 x 2.000 mm Godpfx Aew T Sqgedqokc Dimensi mesin perkiraan (P x L x T): 5,1 x 0,7 x 2,0 m PERLENGKAPAN - berbagai perkakas bending untuk pipa 25 mm - 12 unit collet penjepit dan berbagai alat bantu serta alat penjepit

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2005, jam operasional: 142.500 h, Diameter pipa (maks.): 50 mm, Panjang pipa (maks.): 2.000 mm, radius pembengkokan (maks.): 150 mm, Pipe bending machine, PLC-controlled bending machine, tube bender, pipe bending system, tube processing, pipe technology, electro-hydraulic, mandrel bending machine Performance data: - Round steel tube Ø 50 x 3.0 mm - Round stainless steel tube Ø 50 x 2.0 mm - Max. section modulus 5.0 cm³ - Bending angle up to 180° + 10° springback compensation Machine equipment / Standard features: Gkedpfxewzammj Adqoc - Tube insertion length / usable length: 2000 mm - Maximum bending radius: 150 mm - Bending height: 1050 mm - Freestanding bending head, 850 mm in length - The compact freestanding bending head allows processing of tubes with a minimum clearance of 400 mm between two bends - Electro-hydraulic drive - Automatic operation: selectable via key switch, allows selection of the following operating modes - Function activation via hand switch - In manual mode, all functions can be triggered by push-button in jog operation - In semi-automatic mode, the tube is clamped after the first trigger activation and bent after the second, then the machine returns to its starting position - Widely opening counter bearing, so that with the respective configuration (VWE A-642) the rotation unit can move just behind the bending tool - Bending direction: clockwise - Hollow shaft for achieving small radii - For radii starting from 1x tube diameter - Manual tool reset - Automatic tool locking - All functions hydraulically operated - Control via push-buttons - Standardized hydraulic components - Stationary machine - Colour: RAL 7037 dust gray, RAL 3000 red

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, CNC tube bending machine, tube bender, tube bending system, tube processing, tube technology, right-left bending, 3D tube bending, servo-electric, multi-axis bending machine, mandrel bending machine Performance: - Round tubes steel S235: 22 x 2.0 mm Ø - Round tubes stainless steel 1.4571: 22 x 1.5 mm Ø - Max. section modulus: 0.5 cm³ (S235) - Bending angle: up to 180° + 10° overbend - Bending axis speed: max. 300°/sec - Feed axis speed: max. 1800 mm/sec - Rotation axis speed: max. 600°/sec - Bending axis repeatability: +/- 0.05° - Length repeatability: +/- 0.05 mm - Rotation repeatability: +/- 0.05° - Tube loading length/usable length for mandrel bending: on request - Radius range: max. 66 mm - Bending height: 1150 mm - Thrust force for length positioning: 2.5 kN - Bending axis drive: servo-electric - Rotation and length positioning: servo-electric - Auxiliary axes drive (e.g., clamping, mandrel in/out, etc.): servo-electric - Bending head positioning: servo-electric - Sliding piece positioning (radial): servo-electric - Sliding piece following (axial): servo-electric - Material clamping (collet): pneumatic Machine Specifications/Standard Equipment: - Bending head for right/left bending in one clamping - Bending head can be positioned horizontally and vertically, includes rotary axis for head changeover (right or left bending) - Bending head positioning via combined transverse/rotational axis, enabling right/left bending in one clamping - Bending direction freely programmable, alternating right/left - Each bending head has a standard changeover height of max. 50 mm, allowing at least 2 tooling sets to be mounted depending on tube size—for instance, to use different radii or clamping blocks as required - Maximum radius difference between each level: 1.5xD - With hollow shaft to enable use of tools for small radii - Minimal clamping length at tube end due to wide-opening counterholder, allowing the rotation unit to move directly behind the bending tool -> A separate collet is required for each tube diameter - Chuck for use of segmented collets: depending on the contour of the segments, pre-formed tube ends can also be clamped - Material clamping in the VWE (front clamping unit) is pneumatic - Foot switch for opening or closing the collet in the VWE for easy loading and unloading - Traveling counterholder for bends up to 180° (for radii up to max. 2xD; for larger bending radii, the counterholder can be repositioned to maintain constant support up to 180° bending angle) - Support for the mandrel rod and tube along the full length for correct positioning - Mandrel can be automatically retracted during the bending process as programmed - Minimum quantity lubrication for automatic mandrel lubrication; lubricant volume adjustable, applicable from tube inner diameter 13.5 mm Godpfxewvqgts Adqokc - Central lubrication for automatic lubrication of all moving parts at necessary intervals - Air conditioning for electrical cabinet cooling - Functional activation via manual switch on the control panel - All functions can be operated via keyboard and mouse in manual control mode - The machine is built to the latest safety standards. To comply with CE directives, an additional safety barrier (DB-SA...) is required.

Kondisi: baik (bekas), Tahun pembuatan: 2003, Offer 24365 Technical Specifications: - Bending capacity pipe at 45 kg/mm²: up to Ø 60 x 4 mm - Solid material up to: 45 mm - Bending angle: 0 - 180° - Maximum mean bending radius (Rm): 171 mm Gsdpfjwq I Epex Adqokc - Minimum inner bending radius (Ri): 10 mm - Drive: 400 V / 4 kW - Space requirement: approx. W 400 x H 950 x D 600 mm - Weight: approx. 100 kg - with bending angle preselection - Digital bending angle display + fine adjustment of bending angle - Manual tube torsion device - Bending tools: 22 R 67 mm, 25 R 82 mm, 35 R 110 mm - Flat steel bending attachment

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, jam operasional: 83.700 h, nomor mesin/kendaraan: 0126427-027, Perlengkapan: Pelat tipe tersedia, The LVD STRIPPIT GLOBAL 30 1225 Turret Punch Press The machine is in excellent technical condition, operated at Alsanit. It has been regularly serviced exclusively by the manufacturer's authorized service. Only new and original spare parts were used during maintenance. The turret punch press is currently in continuous production use. Gsdpfx Adowptduoqokc If interested, we encourage you to arrange a visit to confirm the technical condition and technological capabilities of the offered machine. A video demonstrating the operation of the turret punch press is available upon request—please contact us if you wish to receive it. General Information: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Region: Wielkopolskie Year of manufacture: 2006 Date of purchase and installation: June 2019 Operating hours: 83,700 Maximum punching force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret CNC control unit: GE FANUC 180 IP Maximum X-axis travel: 2,576 mm Maximum Y-axis travel: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Punches per minute (punching die 25 mm dia; ±2%): 400 min⁻¹ Punches per minute (“nibbling” function – 2 mm): 1,000 min⁻¹ Punches per minute (marking/0.5 mm): 1,700 min⁻¹ Maximum feed rate in X-axis: 83 m/min Maximum feed rate in Y-axis: 73 m/min Number of tool stations in turret head: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexable (rotating) stations in turret: 4 pcs (D stations) Note: Each D station can accommodate a multitool (1 multitool holds 3 to 8 tools), increasing the tool count from 12 to 32 tools. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Working sheet size: 1,250 x 2,500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting discharge chute for punched parts: 450 x 500 mm Power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm² Additional equipment: Scrap conveyor; Brush table The LVD Strippit Global 30 punch press features 4 programmable rotary stations (D size). Each station can be equipped with a multitool head with automatic rotation. Thanks to the servo drive and CNC control, both the rotary stations and the entire turret can rotate in both directions with an accuracy of 0.01 degrees. The Auto Index rotary stations of the LVD Strippit Global 30 are direct-drive units located directly above each station as part of the turret mechanism. D stations with a diameter of 88.9 mm can be equipped with multitool holders, significantly expanding the machine's capabilities and the number of available tools. The multitool holders allow for mounting 3 or 8 punches and dies with diameters of 12.7 mm or 31.7 mm, respectively. A VAT invoice will be issued. The price quoted is net (excluding VAT)!

Kondisi: bekas, Mandrel Tube Bending Machine 42 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151–153 D - 44143 Dortmund - Wambel Gedpfxjwnrt Se Adqokc

Kondisi: bekas, Tahun pembuatan: 1991, Pipe diameter: 6 - 18 mm Maximum bending angle: 180° Mandrel length: 1500 mm Machine weight: approx. 0.55 t Space requirement: approx. 1.6 x 0.8 x 1.2 m Electro-hydraulic mandrel tube bending machine with - 4 bending angle memory settings - Digital display - Tube bending tools for 20.2 mm, 25.5 mm, 30.2 mm, and 38.2 mm. Godjv T Nq Hopfx Adqjkc

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, Manual length and angle positioner for 6000 mm pipe length The bending capacity can be found in the attached technical documentation in PDF format. Godpfxsv Tz S Aj Adqjkc

Kondisi: bekas, Tahun pembuatan: 1999, Mesin bending mandrel hidrolik Gkedpevxt I Tefx Adqoc Panjang kerja maks.: 4500 mm Untuk diameter pipa 6-50 mm Dengan kontrol otomatis Tidak ada alat tersedia, kontrol bermasalah Berat: sekitar 1200 kg

Kondisi: baik (bekas), Tahun pembuatan: 1996, Pipe diameter: 6 - 28 mm Wall thickness: 2 mm Minimum bending radius: 2 x D Control system: IPU 20 Maximum bending radius: 5.0 x D mm Maximum bending angle: 190° Mandrel length: 3000 mm Operating pressure: 180 bar Hydraulic motor: 4 kW Machine weight: approx. 900 kg Space requirement: approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 bending angles and display in the operator panel for angle presets, angle detection, and measurement via absolute encoder, automatic tool plate return, rotation unit with digital display, hydraulic quick-release chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: Hydraulic on/off, operating mode selection, clamp close/open, advance/retract, mandrel advance/retract, bend forward/reverse, lock forward/reverse, mandrel lubrication, rotation device forward/reverse, plate return, length stop forward, emergency stop. Gjdpfx Asvtgn Njdqskc The machine comes from prototype production and was used only sparingly until 2000. Afterwards, the machines from this department were sold. The buyer never used the tube bending machine, therefore it has only been stored and has not operated since (original paint). This is a used machine, therefore we sell under exclusion of any warranty. INVENTORY DEALER WITH 1600 m² SHOWROOM.

Kondisi: bekas, Tahun pembuatan: 1993, Technical details: Gkodpou Ibyysfx Adqsc Tube diameter: 80 mm Minimum tube diameter: 6 mm Programmable control: Gelma MM-1 Tube feed length: 1,800 mm Machine weight approx.: 0.232 t Machine dimensions approx. LxWxH: 1.9 x 0.7 x 1.3 m Semi-automatic TUBE BENDING MACHINE Operating modes include manual and semi-automatic operation Application: for repeated, multiple bending processes of tubes (e.g. hydraulic piping) The swivel unit features pre-selection for 3 different bending angles in single and automatic mode. Currently, the machine is equipped with a stop rod for tube size Ø 10 mm with 6 angle settings. Bending radius depends on the material used. The bending machine is mobile/movable. Scope of delivery/Accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm *

Kondisi: baru, Features: Bending radii: R10 to R200 (minimum R = 1.8xD) (depends on wall thickness, material, and tube diameter) Max. bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30 programs with 9 bends each Control: NC1 Bending direction: counter-clockwise Usable length (available in different lengths as required): 1.5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3m version) Weight: approx. 600 kg (with 3m mandrel) NOTE: The stated price refers to 1.5 m length. Other lengths available on request! Gedpfx Asuudrkedqokc Early mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Capacity: Hard copper and aluminum: 60 x 4 mm Steel tube: 60 x 3 mm Stainless steel: 60 x 2 mm Scope of delivery: Machine Standard accessories (including foot switch, operating manual, 2 hex keys, 4 sets of chuck jaws, bending grease, 25 mm mandrel rod) Delivery without hydraulic oil

Kondisi: baru, de-en-001 Gkodpjuudi Aofx Adqjc

Kondisi: baru, Bending speed: programmable for each bending angle Control: 7" and 4.3" touch screens with icons Number of programs: unlimited via USB interface LAN or WLAN connection (optional) Right/left bending (possible with special tooling) Depending on machine type: Dimensions, weight, bending radius, and bending capacity Gkodouudg Ispfx Adqoc

Kondisi: bekas, Tahun pembuatan: 1997, Rohrdurchmesser_60mm Gkodpfx Ajt I D Uxsdqec

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Gkodpfettah Rsx Adqjc Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Photos show new machine.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: fungsi terbatas, Tahun pembuatan: 2003, jam operasional: 24.000 h, Diameter pipa (maks.): 100 mm, Panjang pipa (maks.): 4.100 mm, Sudut pembengkokan (maks.): 183 °, radius pembengkokan (maks.): 300 mm, ketebalan dinding: 8 mm, de-Transfluid DB 2090 DB CNC Dornbiegemaschine für Rohre. Hochwertige deutsche Maschine in exzellentem Zustand, die Haupt-Hydraulikpumpen wurden komplett generalüberholt und der Hauptkopf vollständig instand gesetzt. Es muss lediglich ein neuer Encoder installiert werden, dann ist die Maschine betriebsbereit. Ausstattung: - Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D - Vorzeitiger Dornrückzug - Vollautomatische Einstellung der Spannbacken und Mitnehmer - Verstärkter Mitnehmer für enge Radien bei dünnwandigen Rohren - Lange Aufspannlänge mit 4000 mm Überdorn Im Lieferumfang ist umfangreiches Werkzeug im Wert von über 150.000 AUD enthalten: - 101,6 mm - 152 mm CLR - 101,6 mm - 200 mm CLR Gsdpfx Aetrd T Tsdqjkc - 76,2 mm - 114 mm CLR - 76,2 mm - 200 mm CLR - 76,2 mm - 238 mm CLR - 63,5 mm - 96 mm CLR - 57,2 mm - 86 mm CLR - 50,8 mm - 76 mm CLR - 44,5 mm - 67 mm CLR - 40 x 40 mm - 120 mm CLR - 50 x 50 mm - 150 mm CLR - 60,3 mm - 150 mm CLR - 48,3 mm - 120 mm CLR

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1998, radius pembengkokan (maks.): 600 mm, panjang mandrel: 1.200 mm, ketebalan dinding: 8 mm,