Gutmann Engineering GmbH

Kondisi: baik (bekas), Tahun pembuatan: 2011, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 680 mm, Penjepit alat: HSK 63 Cedpsy Iyqljfx Ag Djrb Spindel utama: 85 Kecepatan spindel: 20.000 rpm Majalah rantai: 60 tempat Konveyor serpihan Penukar palet Sistem filter KS Tekanan tinggi KS melalui spindle

Kondisi: baik (bekas), Tahun pembuatan: 2011, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 950 mm, jarak gerak sumbu Z: 1.200 mm, Perjalanan sumbu B: 0-360 ° Perjalanan sumbu A: +45 ° hingga -90 ° Spindle dudukan: HSK 100 Codpfxjy Iymas Ag Djrb Spindle torsi: 200 mm Kecepatan spindle: 15.000 rpm Majalah rantai: 60 tempat Penukar palet Konveyor serpihan Pendingin tekanan tinggi melalui spindle Sistem filter pendingin

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.450 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 1.300 mm, beban meja: 2.000 kg, en-01 Crodpfxsy Idyke Ag Deb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 24.101 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.800 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 600 mm, model controller: Siemens 840D Shopmill 3 D Formingstar, kecepatan spindel (maks.): 12.000 rpm, kapasitas tangki pendingin: 900 l, The machine is in very good used condition, with no backlog of maintenance! TECHNICAL DETAILS Travel in linear operation X-axis: 1,800 mm Travel on tilting table X-axis: 1,020 mm Travel on rotary table X-axis: 675 mm Travel in pendulum operation: 675/675 mm Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle speed: 12,000 rpm Swivel range: +10° to -100° × ±360° Feed rate X/Y/Z: 40 m/min Rotary-swivel table Rotary table dimensions: Ø 620 × 500 mm Interference circle diameter: Ø 700 mm T-slot width: 18 mm T-slot spacing: 100 mm Number of T-slots: 5 Reference slot: 18H8 Centering bore: 30H7 × 10 mm Swivel range: +10° to -90° × ±360° Swivel speed 90°: 1.2 s Swivel accuracy: < ±10″ Codpfxjy A Rzde Ag Djrb Rotary speed: 0–30 rpm Indexing accuracy: < ±6″ Face run-out: 0.015/Ø 300 mm Max. clamping weight: 375 kg Fixed machine table Clamping surface: 1,120 x 750 mm Max. tool weight: 10 kg Max. tool length: 330 mm Max. tool diameter: 80 mm (100 mm with open adjacent positions) Chip-to-chip time: approx. 7.5 - 12 sec. Tool stations: 30 MACHINE DETAILS Internal coolant supply (ICS): 40 bar Coolant tank capacity: 900 liters Tool holder: SK40 Control: Siemens 840D Shopmill 3D Formingstar Standby magazine Total number of stations: 190 Levels: 6 Tool length A: max. 240 mm Capacity A: 100 pcs Tool length B: max. 330 mm Capacity B: 90* pcs Tool changer time: approx. 17–22 s Space requirement: 1,780 × 1,760 mm Height: 2,810 mm Weight: approx. 950 kg Spindle hours: 24,101 h Power-on hours: 62,438 h EQUIPMENT 3D probe Rotary-swivel table

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Workpiece Clamping & Table: • Pallets according to DIN 55201, max. load capacity 5,000 kg • Tilting moment: 50,000 Nm • Rotary table: 10 rpm, resolution 0.001°, tangential torque (clamped): 25,000 Nm Pallet & Tool Changer: • Automatic pallet changer for 3 pallets, changeover time 47 s • Automatic tool changer, chip-to-chip time: 13 s • Tool weight up to 15 kg • Drum magazine with 320 storage positions (4 drums), max. tool Ø 250 mm, max. length 450 mm, max. weight 35 kg Travel Paths & Feed Rates: • Feed range: 1–40,000 mm/min • Rapid traverse: 40 m/min • Acceleration (x/y/z): 4 / 5 / 3 m/s² • Feed forces: max. 20 kN Work Spindle: • Spindle diameter: 100 mm • Speed range: 20–6,000 rpm (optionally 10,000 rpm, 2-stage gearbox) • Tool holder: SK50 (DIN 69871), optionally BT50 or HSK-A100 • Through-spindle process lubrication, max. 70 bar Coolant System: • Coolant unit with fleece gravity filter • Delivery pressure: 10–70 bar, tank capacity 3,400 l • Temperature stabilization and compensation for high dimensional accuracy • Optional: sag and spindle elongation compensation, warm-up program • Hinged belt chip conveyor (optional, with fleece or vacuum filter) • Connection to central coolant system possible Performance & Accuracy: • Continuous power requirement according to installation plan • Sound pressure level ≤ 80 dBA • Positioning accuracy (x/y/z): o Tp = 0.006 mm o Psmax = 0.005 mm o Umax = 0.004 mm Cedpjyzr Aysfx Ag Dorb General Data: • Net weight (complete): approx. 26,500 kg • Paintwork: Light Grey RAL 7035 / Mouse Grey RAL 7005 / Ruby Red RAL 3003 • Operating voltage: 400 V / 50 Hz • Documentation in German

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 600 mm, kecepatan spindel (maks.): 6.000 rpm, jumlah slot dalam magazin alat: 32, RINCIAN TEKNIS Csdpoyykhrsfx Ag Dorb Perjalanan sumbu X: 1.250 mm Perjalanan sumbu Y: 500 mm Perjalanan sumbu Z: 600 mm Kecepatan putar maksimum: 6.000 rpm Tipe spindle: SK 50 Pendingin spindle: 15 bar Ukuran meja: 1.400 x 550 mm Jumlah posisi tool changer: 32 RINCIAN MESIN Daya spindle: 18,5 kW Dimensi (P x L x T): 4.500 x 2.350 x 2.650 mm Catatan: Penjualan mesin tanpa ragum dan alat potong.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2005, jam operasional: 8.883 h, jarak pergerakan sumbu X: 1.400 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.200 mm, panjang pemakanan sumbu X: 1.400 mm, panjang umpan sumbu Y: 1.200 mm, panjang umpan sumbu Z: 1.200 mm, daya nominal (semu): 35 kVA, produsen pengendali: Fanuc 18i-MB (MAPPS2), tinggi total: 3.920 mm, panjang total: 9.200 mm, lebar total: 4.900 mm, lebar meja: 800 mm, panjang meja: 800 mm, kecepatan rotasi (min.): 10.000 rpm, berat keseluruhan: 32.000 kg, kecepatan spindel (min.): 10.000 rpm, Tahun pembuatan: 2005 Kontrol CNC: Fanuc 18 imb (MAPPS2) Sumbu Perjalanan sumbu X mm: 1400 Perjalanan sumbu Y mm: 1200 Perjalanan sumbu Z mm: 1200 Indeksasi sumbu B derajat: 360º (0,001) Gerak cepat m/menit: 50 Meja kerja Jumlah palet: 2 Ukuran palet mm: 800x800 Spindel Kecepatan putar maksimum spindel rpm: 10000 Daya penggerak spindel kW: 35/25 (40%ED/kontinu) Sistem alat Tipe dudukan alat: BT 50 Jumlah alat di majalah: 140 Crodpfx Asyxnypog Dob Perlengkapan Konveyor serbuk/serpihan Sistem pendingin pelumas internal Pompa tekanan tinggi Jam operasi mesin: Jam dalam keadaan menyala: 25378 Jam operasi spindel: 8883 Mesin utama: Dimensi / Berat Panjang mm: 9200 Lebar mm: 4900 Tinggi mm: 3920 Berat kg: 32000

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Dijual Heller MCP-H 460 HS Kontroler Unipro Pusat mesin horizontal 4 sumbu dengan spindle penggerak langsung Area kerja X 2000 mm Y 1400 mm Z 1250 mm Desain kolom portal termo-simetris Sistem palet dirancang untuk kinerja/produksi tinggi Crodpfxsyw Rwzo Ag Djb Tahun pembuatan: 1998 Saat ini masih dalam produksi, akan segera dinonaktifkan Carriage alat tambahan di belakang (selain yang standar), juga dikendalikan dengan kontroler Unipro terpisah Silakan hubungi kami jika Anda membutuhkan informasi tambahan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 123426, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 800 mm, berat benda kerja (maks.): 2.000 kg, kecepatan spindel (maks.): 2.300 rpm, Tanpa harga minimum – dijamin terjual kepada penawar tertinggi! RINCIAN TEKNIS Perjalanan sumbu X: 1.200 mm Perjalanan sumbu Y: 1.000 mm Perjalanan sumbu Z: 800 mm Berat benda kerja (maks): 2.000 kg Lebar meja: 630 mm Panjang meja: 800 mm Kecepatan spindle: 10 – 2.300 rpm Daya motor spindle: 22.000 W Jumlah spindle: 1 Jumlah slot di majalah alat: 161 RINCIAN MESIN Kontrol: Siemens Sinumerik System 800 - 840C Berat total: 24.000 kg PERLENGKAPAN Dokumentasi/manual Putaran dapat diatur secara stepless Cedpfx Aoyw N Sqjg Djrb Konveyor serpihan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1110001, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 800 mm, berat benda kerja (maks.): 1.500 kg, kecepatan spindel (maks.): 3.500 rpm, No reserve price – guaranteed sale to the highest bidder! Further technical details of the machine can be found in the attached machine description. TECHNICAL DETAILS Travel X axis: 1,250 mm Travel Y axis: 1,000 mm Travel Z axis: 800 mm Spindle speed: 10 – 3,500 rpm Number of spindles: 1 Rapid traverse X axis: 25 m/min Rapid traverse Y axis: 25 m/min Rapid traverse Z axis: 25 m/min Feed rate X axis: 25 m/min Feed rate Y axis: 25 m/min Feed rate Z axis: 25 m/min Credpfx Agjyw N Irs Dob Workpiece height (max.): 1,250 mm Workpiece diameter (max.): 1,230 mm Workpiece weight (max.): 1,500 kg Table width: 630 mm Table length: 800 mm Table load capacity: 1,500 kg Number of magazine tool stations: 122 Mounting diameter: 130 mm Tool length: 630 mm Tool weight: 50 kg MACHINE DETAILS Control: Siemens Sinumerik 840C Coolant supply: 50 bar Dimensions & Weight Dimensions (L x W x H): 9,500 x 8,000 x 4,300 mm Weight: 30,000 kg X, Y and Z axis Resolution: 0.001 mm Positioning uncertainty P: 0.010 mm Positioning scatter Ps: 0.006 mm B axis Positioning accuracy (face gear disengaged): 10″ Indirect measuring system B axis indexing accuracy (via face gear): 6″ Machining accuracy Circular interpolation: 0.015 mm Spindle taper run-out: 0.006 mm Pallet change accuracy: ± 0.015 mm EQUIPMENT Documentation/manual Continuously variable speed Chip conveyor Note: The door of the right-hand pallet table is jammed.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1153 000006 3, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.000 mm, model controller: Siemens 840 D Solutionline (PCU 50), kecepatan spindel (maks.): 8.000 rpm, TECHNICAL DETAILS Travel distance X-axis: 1,250 mm Travel distance Y-axis: 1,000 mm Travel distance Z-axis: 1,000 mm Feed rate X, Y, Z axis: 20 - 60,000 mm/min Rapid traverse X, Y, Z axis: 60 m/min Travel distance B-axis: 360 x 0.001 Feed rate B-axis: 10,800 /min Max. table rotation speed: 30 rpm Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Max. workpiece weight: 1,500 kg Clamping surface: 800 x 800 mm Pallet weight: 570 kg Spindle speed: 20 - 8,000 rpm Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions MACHINE DETAILS Control unit: Siemens 840 D Solutionline (PCU 50) Cedpfx Ageyvzl Hj Derb Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or additional equipment): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total weight of the machine: 24,000 kg Operating hours 'Counter external 2 (read off)': 60,197 h EQUIPMENT Chip conveyor with coolant tray Coolant system 4x machine pallets Tool magazine Oil mist extraction unit Length measuring system Y-axis (new spare part) Lubrication unit 230V 0.12 30bar (new spare part) Gear unit ZAHNRADP-AGG*MKF1-KW2-20036 (new spare part) Cyclo gearbox F1C-A25 (new spare part) Conversion kit power module (new spare part) Lifting devices for the machine

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 123426, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 800 mm, produsen pengendali: Siemens, model controller: Sinumerik System 800 - 840C, berat benda kerja (maks.): 2.000 kg, lebar meja: 630 mm, panjang meja: 800 mm, berat keseluruhan: 24.000 kg, kecepatan spindel (min.): 10 rpm, kecepatan spindel (maks.): 2.300 rpm, daya motor spindle: 22.000 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 161, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Kami menawarkan pusat pemesinan horizontal Dörries Scharmann Solon 2 DBF bekas ini, tahun pembuatan 1996. Csdpoyu Srtjfx Ag Derb

Kondisi: baik (bekas), Tahun pembuatan: 2003, jarak pergerakan sumbu X: 1.300 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 7.000 rpm, Mazak FH-8800 Pusat Pemesinan Horizontal Bekas Pendinginan spindel Kecepatan spindel maks 7000 rpm Z- 1000mm X- 1300mm Crodjyuyfhepfx Ag Deb Y- 1100mm Majalah alat untuk 80 alat 1 spindel, 2 palet 800x800 mm x-z-y-b, 4-sumbu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A.100765.01, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.200 mm, model controller: SIEMENS SINUMERIK 840 D, kecepatan spindel (maks.): 6.000 rpm, The spindle of the machine was overhauled in 2015! TECHNICAL DETAILS Travel X-axis: 1200 mm Travel Y-axis: 1000 mm Travel Z-axis: 1200 mm Spindle speed: 25 - 6,000 rpm Max. torque: 900 / 1130 Nm Number of tables: 2 Maximum interference diameter: 1200 mm Table rotation speed: 15 rpm Table clamping torque: 10,000 Nm Tilting moment: 29,000 Nm Distance between spindle nose and table: 130 mm Pallet size: 800 x 630 mm Pallet change time: 16 s Transport weight: 1200 kg Number of tool stations: 250 Maximum tool diameter: 125 mm Diameter with adjacent spaces free: 250 mm Maximum tool length: 650 mm Maximum tool weight: 40 kg Tool change time: 2.5 - 4.5 s Average chip-to-chip time: 7 - 9 s Tool holder: SK 50 DIN69871 Feed rate: 1 - 36,000 mm/min Rapid traverse: 36 m/min MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 10,000 x 6,000 x 3,800 mm Machine weight: approx. 30,000 kg Operating hours: approx. 100,000 h (The machine has operated in 2-shift + ghost shift mode. The previous user estimates the operating hours over 20 years of use at approximately 100,000 hours). EQUIPMENT Direct measurement via glass scales Coolant system 1250 l High-pressure pump 11 bar (coolant) Coolant through spindle 25/50 bar (IKZ) Spindle taper air purge device Paper filter system Chip conveyor Pallet changer system 2 pallets Credpfeytfmzex Ag Djb Set of tool holders Coolant / mist extraction unit Touch probe

Kondisi: baik (bekas), Tahun pembuatan: 2015, FOR SALE: 4-Axis Palletized Horizontal Machining Centre – MCM TANK 1300 MP4 Description: For sale: CNC horizontal machining centre from the renowned Italian manufacturer MCM S.p.A., model TANK 1300. This is a high-performance, extremely rigid and precise machine, engineered for heavy-duty machining of complex components in the aerospace, energy, and general engineering sectors. Technical Specifications (Manufacturer Data): Brand: MCM S.p.A. (Vigolzone, Italy) Model: TANK 1300 (MP4 type) Year of manufacture: 2015 Axes: 4 axes (X, Y, Z + continuous rotary B-axis on table) Compliance: CE marking Working Capacities: Travels (X / Y / Z): 1,300 mm x 1,300 mm x 1,300 mm (generous machining envelope) Pallet Dimensions: 800 x 800 mm or 1,000 x 1,000 mm Pallet System: MP4 configuration (4-position multi-pallet system) for increased production autonomy Spindle Speed: Up to 10,000 rpm (depending on spindle configuration, with high-speed options available) Spindle Taper: HSK-A100 or ISO 50 (high rigidity) Codsyr Hdfepfx Ag Dsrb Tool Magazine: High capacity (standard 80 to 199 tools, expandable) Key Features: "T"-shaped structure: Constant thermal and geometric stability for micron-level accuracy Productivity: The pallet system allows for loading/unloading of parts in masked time, ensuring maximum machine utilization Condition: 2015 machine, serviced and maintained in a modern industrial environment.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.400 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.350 mm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 50 m/menit, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 50 m/menit, produsen pengendali: Mori Seiki (Fanuc), model controller: MSX-701 (Fanuc 31i), tinggi benda kerja (maks.): 1.450 mm, diameter benda kerja (maks.): 1.450 mm, berat benda kerja (maks.): 2.200 kg, tinggi total: 3.850 mm, panjang total: 7.200 mm, lebar total: 4.300 mm, kecepatan spindel (maks.): 8.000 rpm, pasokan pendingin: 70 batang, jenis arus masuk: AC (pendingin udara), Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Here we offer a machining center from the manufacturer Mori Seiki. The machine is fully functional, is in good condition, and can be inspected and tested in our facility by arrangement. Manufacturer: Mori Seiki Model: NH8000 DCG Year of manufacture: 2008 Control: MSX 701-III Technical data: Travel X-Y-Z: 1400 x 1200 x 1350 mm B-axis: 0.001° Feed rate X, Y, Z: 50,000 mm/min Rapid traverse X, Y, Z: 50 m/min Pallet size: 800 x 800 mm Number of pallets: 2 Pallet change time: 16 s Max. workpiece weight: 2,200 kg Max. workpiece diameter: 1,450 mm Max. workpiece height: 1,450 mm Spindle speed: 8,000 rpm Spindle power: 37 kW Tool holder: HSK-A100 Tool magazine: 60 positions Tool change time: 1.9 s Distance between pallet surface and spindle center: 100–1,300 mm Distance between pallet center and spindle nose: 100–1,450 mm Total connected load: 86 kVA Machine dimensions: approx. 7,200 x 4,300 x 3,850 mm Machine transport dimensions: approx. 7,000 x 3,400 x 3,300 mm Machine weight: approx. 30 t Csdpfx Aoyrdn Ueg Dorb Total weight incl. magazine and accessories: approx. 37 t Scope of delivery includes: 1x Mori Seiki NH8000 DCG machine 1x Matrix tool magazine 1x chip conveyor 1x coolant system 1x transformer various tool holders

Kondisi: bekas, Norte VS1000 Mesin Milling CNC Kecepatan putar: 6.000 rpm Sumbu X: 4.000 mm Sumbu Y: 1.000 mm Sumbu Z: 1.000 mm Holder alat: SK50 Kontrol: Siemens 840 D Opsi: Dengan konveyor serbuk Dengan penukar alat Dengan dokumentasi Csdpfx Agoym Eble Derb Dengan peralatan

Kondisi: sangat baik (bekas), jam operasional: 16.800 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.700 mm, kecepatan pemakanan sumbu X: 40 m/menit, laju pemakanan gandar Y: 40 m/menit, laju pemakanan sumbu Z: 40 m/menit, torsi: 822 Nm, produsen pengendali: SIEMENS, model controller: 840D, panjang benda kerja (maks.): 1.890 mm, lebar benda kerja (maks.): 1.450 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, kecepatan rotasi (maks.): 6.000 rpm, daya motor spindle: 43.000 W, hidung spindel: ISO 50 DIN 69871, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, MOD. MCH 450 C DOUBLE PALLET 5-AXIS CNC Control: SIEMENS 840D WORKING AREA: Travel X-axis (longitudinal) mm 1600 Travel Y-axis (vertical) mm 1200 Travel Z-axis (transversal) mm 1700 LINEAR GUIDES: Size 55 DRIVE SYSTEM: Diameter x pitch mm 50x25 FEED FORCE: X-axis (S3-40%) N 15,000 Y-axis (S3-40%) N 15,000 Z-axis (S3-40%) N 17,500 FEED RATE: Working feed (X, Y, Z axes) mm/min 1-40,000 Rapid traverse (X, Y, Z axes) mm/min 40,000 Acceleration (X, Y, Z axes) m/s² 4.0 SPINDLE: Front spindle bearing diameter mm 100 Spindle taper ISO 50 DIN 69871 Spindle motor power (S1-100% / S6-40%) kW 28/43 from speed rpm 500 Max torque (S1-100% / S6-40%) Nm 536/822 up to speed rpm 500 Spindle speed rpm 45-6000 Positioning degrees 360x0.001 Positioning accuracy Tp according to VDI/DGQ 3441 Angular s 10 ROTARY TABLE: Positioning degrees 360x0.001 Positioning accuracy Tp according to VDI/DGQ 3441 Angular s 6 Max clamping weight on pallet daN 2500 Max tangential moment Nm 40,000 Max overturning moment Nm 34,000 45° rotation time s 2.9 90° rotation time s 3.5 180° rotation time s 4.6 PALLET CHANGER: Mating surface according to DIN 55201 A1 Pallet dimensions mm 800x1000 Workpiece dimensions: - Positioning diameter in working area x height mm 1890x1450 Pallet change accuracy (X, Y, Z axes) mm 0.02 Pallet change time s 27 POSITIONING ACCURACY X/Y/Z AXES: Direct measurement with optical scales Position tolerance according to VDI/DGQ 3441 mm 0.010 HIGH PRESSURE 70 BAR COOLING UNIT WITH ROTARY VACUUM FILTER: Coolant tank capacity l 2500 Coolant pump 4 bar flow rate l/min 230 Coolant pump 4 bar flow rate l/min 70 Cjdsydfcdepfx Ag Dsrb High pressure pump 50 bar flow rate l/min 28 CHAIN TOOL MAGAZINE WZM 100: Tool magazine positions 100 Max tool length (from spindle nose) mm 600 Max tool diameter (with adjacent tools) mm 112 Max tool diameter (without adjacent tools) mm 228 INCLUDES: -Chip conveyor (modified for handling very long chips) -Tool breakage control -Handwheel (for controlling and moving axes within the working area) -Tool change in masked time (tools can be loaded/unloaded while the machine performs an automatic program, no need to stop the machine) USED MACHINE YEAR 2007

Kondisi: bekas, Tahun pembuatan: 1997, jarak pergerakan sumbu X: 1.300 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 1.000 mm, produsen pengendali: Mazatrol, berat keseluruhan: 36.000 kg, model controller: M-Plus, berat alat: 2.200 g, Horizontal CNC machining center with Palletech system Table size: 800 x 800 mm. Rotary table (NCRT). Number of pallets: 14. Travel paths: Crodpfx Ajyddfdsg Dsb X-axis: 1300 mm. Y-axis: 1100 mm. Z-axis: 1000 mm. Table indexing: 0.001°. Number of tool pockets: 237 positions. Maximum spindle speed: 37–7,000 rpm. Tool holder: DIN 69871A-50. CNC control: M-Plus If you have any questions about the machine or would like to arrange an inspection appointment, please feel free to contact us by phone or email.

Kondisi: bekas, Tahun pembuatan: 2014, de_maschine_cnc_technische_daten_1 Crodpfxsyan Rce Ag Dsb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jarak pergerakan sumbu X: 1.400 mm, jarak lintasan sumbu Y: 1.050 mm, jarak gerak sumbu Z: 1.200 mm, produsen pengendali: FANUC, model controller: 31i CNC, tinggi total: 3.760 mm, berat keseluruhan: 26.000 kg, kecepatan spindel (maks.): 6.000 rpm, berat alat: 30.000 g, jumlah sumbu: 4, This horizontal 4-axis machining center DOOSAN HM 8000 was manufactured in 2014. Equipped with a Fanuc 31i CNC control, it offers a maximum workpiece diameter of 1450 mm and a weight capacity of 2000 kg. It features a high-pressure through-spindle coolant system, a chip conveyor, and both workpiece and tool measuring probes. If you are looking for a high-quality milling machine, you should consider the DOOSAN HM 8000 that we have for sale. Contact us for further information about this machine. Additional Equipment • Belt oil skimmer • Triple signal tower • Shower coolant system • Through-spindle coolant 70 bar – 75 kW with cyclone filtration • Automatic shut-off • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Machine Advantages Technical Machine Advantages • Equipped with Fanuc 31i CNC control • B-axis: indexed in increments • Pallet size: 800 x 800 mm • Pallet centering device • Tool magazine: 60 tools type BT 50 Csdjyair Uopfx Ag Djrb • Max. torque: 1732 Nm Additional Information Machine still under power Dimensions Machine Depth 8150 mm

Kondisi: bekas, Tahun pembuatan: 2001, jarak pergerakan sumbu X: 1.800 mm, jarak lintasan sumbu Y: 1.800 mm, jarak gerak sumbu Z: 1.800 mm, produsen pengendali: Fanuc, berat keseluruhan: 75.000 kg, panjang meja: 1.000 mm, lebar meja: 1.000 mm, model controller: 160i-M, beban meja: 2.000 kg, en-GB Csdpfxjx Ttx Ts Ag Dorb

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 20 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 203 mm, jarak gerak sumbu Z: 1.219 mm, berat keseluruhan: 2.087 kg, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, Kami menawarkan pusat pemesinan horizontal bekas HAAS TL-2 ini, tahun pembuatan 2022. Nomor seri: 3124664 Tanggal pembuatan: 06/2022 Tegangan: 400 V Fasa: 3 Frekuensi: 50/60 Hz Arus nominal: 13 A Arus maksimum: 10 A Csdpfx Agox Tgx Ho Derb Jika Anda memiliki pertanyaan lebih lanjut atau membutuhkan informasi lebih detail, silakan kirim pesan atau hubungi kami.

Kondisi: baik (bekas), Tahun pembuatan: 2009, jam operasional: 22.100 h, Fungsionalitas: berfungsi sepenuhnya, HECKERT HEC 1250 ATHLETIC PINOLE For sale is a Heckert HEC 1250 Athletic Pinole horizontal machining center, year of manufacture 2009, from ongoing industrial operation. The machine is in exceptionally well-maintained condition and fully functional. Over the years, it has undergone consistent preventive maintenance. Documented maintenance was performed in 2012, 2014, 2016, 2017, 2018, and 2019. Documented inspections were carried out in 2021, 2022, and 2023. In 2025, the ZP-KGT was renewed. The machine shows approximately 50,100 operating hours. The machine is equipped with Siemens SINUMERIK 840D Solutionline and is ideally suited for machining large and heavy prismatic workpieces. Thanks to the combination of NC rotary table, quill support, SK50 interface, and large tool magazine, the system is very well equipped for multi-side machining, heavy-duty cutting, and complex machining tasks with minimal setups. Technical Data Manufacturer: Starrag Heckert Model: HEC 1250 Athletic Pinole Year of manufacture: 2009 Machine type: Horizontal Machining Center Control: Siemens SINUMERIK 840D Solutionline Potential total number of axes according to documentation: 5 Travel X: 2200 mm Travel Y: 1500 mm Travel Z: approx. 1850 mm Tool holder: DIN 69871 SK50 Tool magazine: 280 stations Max. tool length: 450 mm Max. tool diameter: 250 mm Max. tool weight: 35 kg Probe: Renishaw MP10 Pallet system: 2-pallet system Pallet size: 1000 x 1250 mm Additional pallets according to documentation: 4 pallets with threaded holes / T-slots Mains connection: TN-C, 3/PEN AC 400 V Rated current: 250 A Connected load: 130 kW Compressed air: 6 bar Operating hours: approx. 50,100 h Credpfsx Syhrox Ag Dsb Equipment - Quill support - NC rotary table - 280-position tool magazine - Renishaw probe MP10 - Oil sump - Platform - Coolant system - Chip extractor - Documentation / Operating manuals available Maintenance and History - Documented maintenance: 2012, 2014, 2016, 2017, 2018, 2019 - Documented inspections: 2021, 2022, 2023 - 2025: ZP-KGT replaced Availability - Machine located in Augsburg - Dismantling possible from 31/03/2026 - Collection by 29/05/2026 - Viewing by appointment Scope of Delivery - Machine as described - Without tools - Without additional spare parts

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 1.400 mm, gerak cepat sumbu X: 60.000 m/menit, pergeseran cepat sumbu Y: 60.000 m/menit, pergerakan cepat sumbu Z: 60.000 m/menit, lebar meja: 1.000 mm, panjang meja: 1.250 mm, beban meja: 3.000 kg, jumlah slot dalam magazin alat: 180, X-Achse-1600mm-de Csdpfxox Sqpto Ag Dsrb