Habusch Maschinen GmbH
Habusch Maschinen GmbH dari Mühltal (Nieder-Ramstadt)
Wir handeln mit Werkzeumaschinen, Industriemaschinen und Werkzeugen.
Tuan Hagen Busch
An der Schillertanne 7
64367 Mühltal (Nieder-Ramstadt)
Jerman
Hessen
Penawaran terbaru dari dealer serupa
iklan kecil

10.199 km
Gergaji pita
CORMAKBS260G
CORMAKBS260G
Hubungi
Kondisi: bekas, Tahun pembuatan: 2025, Horizontal band saw with pivoting arm for metal cutting, enables cutting perpendicular to the axis of the material as well as at any angle from 0 to 60º. Material can be fed manually or via any mechanical feeder, with automatic tool feed. The blade guides are equipped with dedicated carbide plates and bearings. This has a significant impact on blade tracking, service life, straightness of the cut, precision, and cutting quality.
The saw arm is made from cast iron profile. The control panel is located adjacent to the arm. Power from the electric motor is transmitted to the drive wheel of the saw blade via a motor with a worm gearbox. The cutting blade is tensioned on two cast iron wheels using a manual tensioner and guided by an adjustable bearing and linear carbide guide system. A separate coolant tank with an electric pump is located inside. The descent speed of the saw arm (cutting speed) is hydraulically controlled. Feed rate is managed via the control panel. Two saw blade speeds are selectable: 36 and 72 m/min. In the arm rest position (after cutting), the saw blade drive is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after completing a cut or when any guard is opened; additional protection includes automatic saw shut-off in case of blade breakage.
Technical data
Saw blade dimensions: 2455×27×0.9 mm
Blade tension: mechanical (manual)
Blade speed: 36, 72 m/min
Feed speed: 0–50 m/min (stepless)
Arm descent control: stepless – hydraulic cylinder
Hnedpfsxn Itrox Adqju
Vise base height: 900 mm
Power supply: 3-phase 400 V
Motor power: 1.1 kW
Weight: 216 kg
Warranty: 12 months
Manual operation: yes
CE declaration: yes
Cutting capacity (diameter x rectangle x square):
Angle 0º: ø230 mm / 260×150 mm / 225×225 mm
Angle 45º: ø165 mm / 180×130 mm / 165×165 mm
Angle 60º: ø105 mm / 100×90 mm / 110×110 mm
*Please note: The machine is delivered by default without a CEE connector, as many different types are available. If you require the connector supplied with the machine, please contact the seller prior to or during purchase.
NOTE! MACHINE IS RETURNED/STOCK-CLEARED ITEM, SERVICED, SOLD WITHOUT PACKAGING.
iklan kecil

11.235 km
Gergaji pita
PEGAS290 x 320 GH-LR
PEGAS290 x 320 GH-LR
Hubungi
Kondisi: bekas, Tahun pembuatan: 2012, 1
Hnedpfx Aexiyzkodqju
iklan kecil

11.133 km
Gergaji pita
MEBAMEBAbase 32A
MEBAMEBAbase 32A
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Standard Equipment of the MEBAbase 32A
Fully automatic bandsaw with partial enclosure for safe, clean, and quiet operation
Torsion-resistant welded construction for high stability and long service life
Lateral band guidance combining pre-tensioned carbide slide guides and band-twist rollers
Hydraulic saw feed
Infinitely variable saw feed speed from 1–300 mm/min
Permanent monitoring of cutting pressure and feed rate, with automatic adjustment if cutting pressure is too high
Infinitely variable cutting speed 10–80 m/min
Large dimensioned coolant tank (approx. 90 liters)
Automatic blade breakage detection with shutdown in the event of blade breakage
Hydraulic blade tensioning
Powered round brush for optimal tooth cleaning
Automatic material feed with hydraulic full-stroke material clamping
Robust, linear guided feed vice for maximum positioning accuracy
Integrated end-of-material detection
Feed vice opens on both sides
Closed roller conveyor with precision ball bearing rollers
Convenient part disposal via inclined cut-off chute with coolant return
Robust panel controller with touchscreen, menu-guided, self-explanatory iconography
Fully automatic sawing cycle for any length and quantity
Simple program creation and management
Chip conveyor as standard equipment
Technical Data
Type: Straight Cut Saw 90°
Max. cutting capacity width ↔ (mm): 320
Hodpfexdv Rdox Adqjnu
Max. cutting capacity height ↕ (mm): 320
Max. cutting capacity Ø (mm): 320
Material to cut: tube, solid round material, square tube, solid square material
Motor [kW]: 5
Saw blade [mm]: 4115 x 34 x 1.1
Blade speed [m/min]: 10–80
Dimensions (LxWxH) [mm]: 2250 x 2300 x 1700
Weight [kg]: 2000
Working height [mm]: 830
Feed length per single stroke [mm]: 500
Degree of automation: Series cutting
Options / Additional Equipment
Additional chip conveyor or customer-specific chip brush solutions
Extended coolant systems
Customizable cutting line display (laser)
Installation elements (on request)
Technical modifications reserved. The machine is sold under statutory warranty conditions. Details regarding exact delivery time will be included in the order confirmation.
iklan kecil

10.671 km
Gergaji pita
Viber-SystemS275
Viber-SystemS275
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, S275 metal cutting machine
Motor Type: Three-phase induction motor
Connection: 400 V 50/60 Hz
Power Supply: 400 V (three-phase)
Protection Class: IP54
Power Output: 1.5 HP (1.1 kW)
Rated Current: 400 V (3.6 A)
Speed (rpm): 50 Hz: 2840/1420
Gearbox:
Gear Ratio: 50 Hz: 1:30
Bandsaw
Blade Dimensions: 2480 x 27 x 0.9 x 6–10 mm
Blade Guide Wheel Diameter: 293 mm
Blade Speed: 50 Hz: 45/90 (m/min)
Hjdsxdbzbopfx Adqjnu
Coolant Pump:
Type: 230 V, 100 W
Rated Current: 0.3 A
Speed: 50 Hz: 2840 (rpm)
Tank Capacity: 10 litres
Mechanical Data
Dimensions with Base: 1560 x 990 x 1665 (mm)
Dimensions without Base: 1320 x 510 x 755 (mm)
Shipping Dimensions: 1380 x 570 x 890 (mm)
Weight: Net: 185 kg | Gross: 200 kg
Sound Level: 70 dB
Fuse: max. 16 Amps
Ambient Temperature: 5–35 °C
Humidity: 25–80 %
General:
Mitre cutting via swivelling arm
Blade guidance: ball-bearing guide rollers
Saw arm lift: manual
Feed rate: infinitely adjustable
Blade tensioning: manual via handwheel
Blade guides with bearings and carbide inserts
Height from floor to vice: 910 mm
iklan kecil

11.284 km
Bandsaw - horizontal
FORTEBA 251
FORTEBA 251
Hubungi
Kondisi: bekas, Tahun pembuatan: 1970, Diameter pemotongan 250 mm
Panjang pita gergaji 3660 mm
Lebar potong 1,3 mm
Rentang penjepitan panjang 450 mm
Rentang penjepitan tinggi 250 mm
Kecepatan pemotongan 20 - 70 m/menit
Gaya pemotongan dapat disesuaikan secara kontinu
Pemotongan kemiringan - dua sisi 45 °
Tegangan listrik 380 V
Frekuensi 50 Hz
Daya penggerak 0,55 kW
Berat mesin sekitar 0,7 t
Hnodpfoxc Nwuex Adqou
Ruang yang dibutuhkan sekitar 1,5 x 1,0 x 1,6 m
Perangkat pendingin,
iklan kecil

11.013 km
Gergaji pita
BFSSuper Trad 301 Dual Mode
BFSSuper Trad 301 Dual Mode
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Manual high-performance metal band saw with selectable manual or hydraulic saw frame lowering. In autonomous mode, the lowering speed is infinitely adjustable via the “Push&Pull” controller. Pulling the controller locks the frame at the previously selected speed, and it does not need to be adjusted again for subsequent cuts.
Standard features:
- Saw frame in sturdy cast construction
- Solid round table with cutting channel for miter cuts: 0°–60° to the right and 0°–45° to the left
- Sliding vise with adjustable guide bars and quick-release lever for repeat cuts
- Oil-bath reduction gearbox with bronze gear and hardened, ground steel worm
Hsdjxcnqajpfx Adqonu
- Electric coolant pump for band lubrication and cooling
- Mechanical blade tensioning with electronic band monitoring
- Precise blade guidance via adjustable, ground carbide guides and ball bearings
- “Push&Pull” control for adjusting the lowering speed
- Rotating chip-removal brush
- Precision angle scale for angles from 60° right to 45° left
- Control panel with operation-ready indicator, main/speed selector switch, and selector for manual or autonomous lowering mode
- Emergency stop button at knee height for optimal accessibility
- Micro-switch in handle for motor and pump start
- “Dead-man” function in manual mode
- Safety switch on blade guard and blade tensioning carriage
- Limit switch for motor shut-off at end of cut
- Length stop for repeat cuts
- Material support on the feed side
- Bi-metal band saw blade
- Tool kit and operating instructions
Technical specifications:
* 400 V 2-speed three-phase motor, 1.1/1.5 kW
* 2 cutting speeds (33/66 m/min)
* Vise opening: 305 mm
* Working height: 940 mm
* Saw blade dimensions: 2750 × 27 × 0.9 mm
* Weight: 380 kg
Cutting capacity (mm):
90° 255 250×250 300×200
45° R 190 180×180 190×170
60° R 110 110×110 150×110
45° L 160 140×140 170×120
iklan kecil

11.235 km
Gergaji pita
V-TRADEBMT 250 V
V-TRADEBMT 250 V
Hubungi
Kondisi: bekas, Tahun pembuatan: 2013, Cutting diameter: 250 mm
Cutting capacity at 90 degrees, flat: 250 x 450 mm
Cutting capacity at 45 degrees, round: 190 mm
Cutting capacity at 45 degrees, square: 250 x 190 mm
Table height: approx. 650 mm
Saw blade length: 3300 mm
Saw blade dimensions: 3300 x 27 x 0.9 mm
Cutting speed: 21 - 62 m/min
Total power requirement: 1.5 kW
Machine weight: approx. 320 kg
Space requirement: approx. 1739 x 571 x 1130 mm
Very rarely used (!!)
Equipment:
- Electro-hydraulic horizontal bandsaw
- Precision saw band guide
- Infinitely variable band speed
- Infinitely variable feed of the saw bow
- Heavy cast-iron construction
- Manual quick clamping of material
- Adjustable for mitre cuts
- Replacement saw blades
- Coolant device
Hnedpfxoxab Efe Adqou
* Machine link:
?machineno=1008-9173350
iklan kecil

11.235 km
Gergaji pita
MEPSHARK 282 CCS / MDE
MEPSHARK 282 CCS / MDE
Hubungi
Kondisi: baru, Cutting diameter: 250 mm
Cutting capacity at 90°: flat 280 x 220 mm
Cutting capacity at 90°: square 220 x 220 mm
Cutting capacity at 45°: round 230 mm
Cutting capacity at 45°: flat 220 x 200 mm
Cutting capacity at 45°: square 200 x 200 mm
Cutting capacity at 60°: flat 140 x 100 mm
Cutting capacity at 60°: square 100 x 100 mm
Cutting capacity at 60°: round 110 mm
Vice opening: 285 mm
Speed range: 36/72 m/min
Saw blade dimensions: 2,950 x 27 x 0.9 mm
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 440 kg
Space requirement: approx. 1620 x 1360 mm
Equipment/features:
- Heavy-duty electro-hydraulic bandsaw (INDUSTRIAL)
- Large, bearing-mounted rotary table
* For miter cuts from 45° right to 60° left
- Automatic saw bow lowering
* Infinitely variable feed adjustment
* Automatic cut-off at end of cut
- Manual cutting function selectable
- 2x saw blade speeds
- Carbide blade guides
- 1x saw band
- 1x angle stop
- Rotating chip removal brush
- Operator control panel – front right
Hedpfoxabpwsx Adqsnu
- Hydraulic power pack for saw blade tensioning
* With analog pressure gauge (manometer)
- Machine base with forklift pockets
- Operating manual in German
SPECIAL ACCESSORIES INCLUDED:
- MEP LubeCut micro-dosing unit
iklan kecil

11.235 km
Gergaji pita
BERG & SCHMIDGBS 218 Eco AutoCut
BERG & SCHMIDGBS 218 Eco AutoCut
Hubungi
Kondisi: baru, Cutting diameter: 220 mm
Cutting capacity at 90°: square 210 x 210 mm
Cutting capacity at 90°: flat 230 x 185 mm
Cutting capacity at 45°: round 150 mm
Cutting capacity at 45°: square 150 x 150 mm
Cutting capacity at 45°: flat 150 x 210 mm
Cutting capacity at 60°: round 90.0 mm
Cutting capacity at 60°: square 90 x 90 mm
Cutting capacity at 60°: flat 90 x 100 mm
Saw blade dimensions: 2455 x 27 x 0.9 mm
Cutting speeds: 35 + 70 m/min
Working height: approx. 900 mm
Total power requirement: 1.2 kW
Weight: 240 kg
Dimensions (L x W x H): 870 x 1550 x 1740 mm
Features:
- Compact / robust manual bandsaw (for hobby and industrial use)
* Suitable for cutting solid materials and profiles
- Mitre cuts up to 60° to the left possible
- Two selectable cutting speeds (37 + 74 m/min)
- Infinitely adjustable saw bow feed
- Automatic shut-off at end of cut
- Manual quick-release vice, incl. quick-clamping lever
- Machine base
Hnodpfsxabbgox Adqju
- Coolant system
- Operating manual
BERG SCHMID Auto-Cut System = 3-stage system
1. Automatic lowering & automatic sawing
2. Manual operation – lowering and sawing
3. Rapid lowering of the saw frame – without sawing
iklan kecil

11.235 km
Gergaji pita
BERNARDOHBS 275
BERNARDOHBS 275
Hubungi
Kondisi: baru, Cutting diameter: 225 mm
Saw band length: 2480 mm
Table height: 910 mm
Cutting capacity at 90 degrees (flat): 245 x 150 mm
Hjdpfx Adsxaa Tboqjnu
Cutting capacity at 90 degrees (square): 200 x 200 mm
Cutting capacity at 45 degrees (round): 160 mm
Cutting capacity at 45 degrees (square): 160 x 160 mm
Cutting capacity at 60 degrees (round): 100 mm
Cutting capacity at 60 degrees (square): 100 x 100 mm
Speed range: 45/90 m/min
Saw band dimensions: 2480 x 27 x 0.9 mm
Total power requirement: 1.5 kW
Machine weight approx.: 200 kg
Space requirements approx.: 1430 x 720 x 1700 mm
Equipment:
- For cutting profiles, pipes, and solid materials made of iron and non-ferrous metals
- Saw bow can swivel up to 60° for mitre cuts
- Infinitely adjustable downfeed via hydraulic lowering cylinder
- Torsion-resistant, heavily dimensioned saw arm made of cast iron
- 2 saw band speeds for optimal cutting results (400 V)
- Robust construction ensures smooth and vibration-free operation
- Automatic shut-off after material cut-through
- Heavy-duty cast iron vice with quick-release
- Ball-bearing saw band guide with quick adjustment for workpiece width for optimal results
Scope of delivery:
- Saw blade
- Workpiece stop
- Base frame
- Tension gauge for band tension
- Vice with quick-release
- Coolant system
- Hydraulic lowering cylinder
- Motor protection switch
- Automatic shut-off
iklan kecil

11.235 km
Gergaji pita
MEPSHARK 281 CCS / MDE
MEPSHARK 281 CCS / MDE
Hubungi
Kondisi: baru, Cutting diameter: 250 mm
Cutting capacity at 90° (flat): 280 x 200 mm
Cutting capacity at 90° (square): 230 x 230 mm
Cutting capacity at 45° (round): 190 mm
Cutting capacity at 45° (flat): 180 x 180 mm
Cutting capacity at 45° (square): 180 x 180 mm
Cutting capacity at 60° (flat): 110 x 110 mm
Cutting capacity at 60° (square): 110 x 110 mm
Cutting capacity at 60° (round): 120 mm
Vice width: 285 mm
Speed range: 36 / 72 m/min
Saw blade dimensions: 2,950 x 27 x 0.9 mm
Total connected load: 1.5 / 1.8 kW
Machine weight: approx. 370 kg
Space requirements: approx. 1,620 x 1,360 mm
Equipment:
- Robust electro-hydraulic bandsaw (INDUSTRIAL)
- Single-sided mitre cut up to 60°
- Automatic saw bow lowering with infinitely variable feed adjustment
- Cut-off switch at end of cut
Hnsdpfx Asxaa H Iodqju
- Manual cutting function selectable
- 2x saw blade speeds
- Saw blade guide made of carbide plates
- 1x saw blade
- 1x angle stop
- Rotating swarf removal brush
- Control panel located at front right
- Hydraulic pressure accumulator for saw blade tensioning with analogue pressure gauge (manometer)
- Machine base
- Operating manual in German
SPECIAL ACCESSORIES INCLUDED:
- MEP LubeCut micro-dosing system
iklan kecil

11.235 km
Gergaji pita
MEPPH 261-1 HB
MEPPH 261-1 HB
Hubungi
Kondisi: baru, Cutting diameter: 225 mm
Cutting capacity at 90 degrees: flat 245 x 150 mm
Cutting capacity at 90 degrees: square 200 x 200 mm
Cutting capacity at 45 degrees: flat 160 x 140 mm
Cutting capacity at 45 degrees: round 160 mm
Cutting capacity at 45 degrees: square 140 x 140 mm
Cutting capacity at 60 degrees: flat 110 x 80 mm
Cutting capacity at 60 degrees: square 90 x 90 mm
Cutting capacity at 60 degrees: round 90 mm
Vice: 245 mm
Speed range: 46/92 m/min
Saw blade length: 2450 x 27 x 0.9 mm
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 240 kg
Space requirement: approx. 1,530 x 900 x 1,720 mm
Equipment:
- Compact, robust manual bandsaw
- Single-sided mitre adjustment up to 60° to the left
- Hydraulic lowering of the saw bow
* Infinitely variable feed adjustment
* Automatic cut-off at end of cut
- 2 saw band speeds
- Saw blade guides made of carbide plates
- Manual vice with quick-release
- Machine base
- Coolant device
- Manual saw blade tensioning (star handle at the front)
- 1x angle stop
- 1x metal saw blade
- Operating manual
Hnodpfxjxaa Dyj Adqeu
iklan kecil

11.235 km
Gergaji pita
MEPSHARK 282 CCS
MEPSHARK 282 CCS
Hubungi
Kondisi: baru, Cutting diameter 250 mm
Cutting capacity at 90 degrees: flat 280 x 220 mm
Cutting capacity at 90 degrees: square 220 x 220 mm
Cutting capacity at 45 degrees: round 230 mm
Cutting capacity at 45 degrees: flat 220 x 200 mm
Cutting capacity at 45 degrees: square 200 x 200 mm
Cutting capacity at 60 degrees: flat 140 x 100 mm
Cutting capacity at 60 degrees: square 100 x 100 mm
Cutting capacity at 60 degrees: round 110 mm
Hnodpexaarksfx Adqju
Vice 285 mm
Speed range: 36/72 m/min
Saw blade length 2,950 x 27 x 0.9 mm
Total power requirement 1.5/1.8 kW
Machine weight approx. 440 kg
Space requirement approx. 1,620 x 1,360 mm
Equipment/features:
- Heavy-duty electro-hydraulic bandsaw (INDUSTRIAL)
- Large bearing-mounted rotary table
* For mitre cuts from 45° right to 60° left
- Automatic saw bow lowering
* Continuously adjustable feed rate
* Automatic cut-off at end of cut
- Manual cutting function selectable
- 2x saw blade speeds
- Saw blade guides made of carbide plates
- 1x saw blade
- 1x angle stop
- Integrated chip cleaning brush
- Control panel - front right
- Hydraulic tensioner for saw blade
* With analogue pressure gauge (manometer)
- Machine base with forklift pockets
- Coolant device
- Operating instructions in German
iklan kecil

11.235 km
Gergaji pita
MEPSHARK PH 262 HB
MEPSHARK PH 262 HB
Hubungi
Kondisi: baru, en-GB-001
Hnodpfx Aexaacijdqou
iklan kecil

10.199 km
Gergaji pita
CORMAKBS712SW 20mm 400V
CORMAKBS712SW 20mm 400V
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Profesjonalna, bardzo wydajna i mocna piła taśmowa do metalu z ramieniem obrotowym 45°. Idealne rozwiązanie dla zakładów ślusarskich, produkcyjnych oraz warsztatów rzemieślniczych. Niezrównana od wielu lat konstrukcja oraz solidna budowa czynią ją doskonałym wyborem.
Opis maszyny
Profesjonalna, bardzo wydajna i mocna piła taśmowa do metalu z ramieniem obrotowym 45°, CORMAK BS 712 SW oparta jest na dopracowanych rozwiązaniach, czyniących ją bezkonkurencyjną w swojej klasie.
Ramię wykonane z żeliwa sferoidalnego zapewnia sztywność podczas pracy i tłumi wszelkie drgania. Panel sterowania znajduje się na ramieniu przecinarki. Urządzenie cechuje się wysoką wydajnością i prostą obsługą. Umożliwia cięcie w pionie oraz w płaszczyźnie prostopadłej do osi ciętego materiału albo pod dowolnym kątem w zakresie 45°–90°. Przecinany element może być podawany ręcznie lub za pomocą dowolnego urządzenia podającego. Posuw ramienia podczas cięcia jest grawitacyjny, oparty na przepływie oleju w dwukomorowym siłowniku hydraulicznym. Odpowiednią prędkość opuszczania ramienia uzyskuje się dzięki zaworowi sterującemu przepływem oleju między komorami siłownika.
Wytrzymała, stabilna i dopracowana konstrukcja oraz ramię odlane z jednego kawałka żeliwa gwarantują wysoką sztywność i stabilność cięcia, zapewniając precyzję i długotrwałą niezawodność. Zastosowanie brzeszczotu taśmowego o szerokości 20 mm pozwala na cięcie dużych ilości elementów. Wymaganą prędkość liniową taśmy uzyskuje się przez zmianę przełożenia na kołach pasowych pomiędzy przekładnią ślimakową a silnikiem napędowym.
Dane techniczne
Moc silnika 1,1 kW
Prędkości taśmy 22/33/45/65 m/min
Hedpew U Skvofx Adqjnu
Zasilanie 400V
Wymiary taśmy 2360×20×0,9 mm
Zakres cięcia 45°L – 45°P
Waga 145 kg
Wymiary 1280×575×1140 mm
Kąty
0°.....Ø 205.....215×205.....205×205
45° L.....Ø 150.....100×200.....130×130
45° P.....Ø 140.....140×90.....90×90
Podana cena jest ceną netto. Cena nie obejmuje kosztów transportu.
W celu uzyskania dodatkowych informacji prosimy o kontakt telefoniczny lub mailowy. Zapraszamy do zapoznania się z ofertą na naszej stronie internetowej.
iklan kecil

10.917 km
Gergaji pita
JAESPAW 260 AZ
JAESPAW 260 AZ
Hubungi
Kondisi: bekas, Tahun pembuatan: 1991, nomor mesin/kendaraan: 1430 91, Technical Data
Cutting diameter: 260 mm
Saw band length: 3660 mm
Cutting width: 0.9 mm
Cutting range - square: 260 x 260 mm
Feed length: 500 mm
Feed length (multiple): 5,999 mm
Cutting speed: 17 - 106 m/min
Hedpfx Aow Eua Ajdqsnu
Saw band dimensions: 3660 x 25 x 0.9 mm
Saw motor: 1.5 kW
Total power requirement: 2 kW
Machine weight: approx. 1.05 t
Machine dimensions (L x W x H): 1.75 x 1.80 x 1.15 m
Accessories
Coolant
Specifications according to manufacturer
iklan kecil

10.693 km
Bandsaw logam bekas Hans Schreiner MBS270
Hans SchreinerG-ME132214P
Hans SchreinerG-ME132214P
Hubungi
Kondisi: bekas, Hans Schreiner MBS270 metal band saw, good condition, 1.5 kW, 2450 mm band length, 227 kg
Prices subject to change. Errors, misprints and typographical mistakes excepted.
Hodpfx Ajwzzgnodqsnu
iklan kecil

11.228 km
Bandsaw - horizontal
BEKA-MAKBMS 230 DG
BEKA-MAKBMS 230 DG
Hubungi
Kondisi: baru, Tahun pembuatan: 2022, Cutting diameter 230 mm
Hnsdpfx Aowp Tmiedqou
Saw band length 2730 mm
Cutting width 320 mm
Round material 230 mm
Flat material 320 x 130 mm
- New machine -
- Double mitre saw -
(Item no. 105126)
* For more information regarding the exact standard configuration and available options, please visit our website or contact us directly *
iklan kecil

10.199 km
Gergaji pita
CORMAKBS712A 27mm 400V
CORMAKBS712A 27mm 400V
Hubungi
Kondisi: bekas, Tahun pembuatan: 2025, Piła taśmowa do metalu, o optymalnym zakresie cięcia, powszechnie stosowana w zakładach stolarskich, produkcyjnych i rzemieślniczych.
Opis maszyny
Uniwersalna piła taśmowa CORMAK BS 712 A z certyfikatem CE to sprawdzone rozwiązanie do cięcia metalu, niezawodne od lat. Charakteryzuje się wysoką wydajnością i prostą obsługą. Umożliwia cięcie w płaszczyźnie pionowej oraz prostopadle do osi przecinanego materiału, jak również pod dowolnym kątem w zakresie 45°–90°.
Cięty element może być podawany ręcznie lub przez dowolne urządzenie podające. Posuw podczas cięcia odbywa się grawitacyjnie na zasadzie przepływu oleju w dwukomorowym siłowniku hydraulicznym. Odpowiednią prędkość opadania ramienia uzyskuje się poprzez zawór sterujący przepływem oleju między komorami siłownika hydraulicznego.
Wymagana prędkość liniowa taśmy uzyskiwana jest przez zmianę przełożenia na kołach pasowych między przekładnią ślimakową a silnikiem napędowym.
Solidna, stabilna i dopracowana konstrukcja oraz ramię wykonane z jednolitego żeliwa zapewniają wysoką sztywność i stabilność podczas cięcia, gwarantując dokładność oraz długotrwałą niezawodność. Konstrukcja stosowanej tu taśmy tnącej o szerokości 20 mm umożliwia cięcie dużych ilości elementów.
Dane techniczne
Rozmiar taśmy tnącej 2360×27×0,9 mm
Napięcie taśmy mechaniczne (ręczne)
Prędkości taśmy 22, 33, 45, 65 m/min
Prędkość posuwu 0–50 m/min (bezstopniowa regulacja)
Sterowanie opadaniem ramienia płynne – siłownik hydrauliczny
Zasilanie 3-fazowe 400V
Moc silnika głównego 1,1 kW
Waga 190 kg
Kąt
0°.....180 mm....300×180 mm.....180×180 mm
45°.....130 mm....120×125 mm.....125×125 mm
Konstrukcja maszyny
Układ napędu taśmy tnącej zbudowany jest z dwóch kół żeliwnych. Pierwsze koło to koło naciągowe (regulowane dźwignią), a drugie to koło napędowe. Moment obrotowy z przekładni ślimakowej przekazywany jest bezpośrednio na koło naciągowe, natomiast przekładnia ślimakowa napędzana jest przez silnik elektryczny. Odpowiedni kąt ustawienia taśmy zapewnia zespół łożysk tocznych.
Podstawę maszyny stanowi sztywny prostopadłościan wykonany z blach stalowych, wewnątrz którego znajduje się zbiornik cieczy chłodzącej z pompą chłodziwa. Dzięki obrotowemu imadłu możliwe jest cięcie materiału pod kątami 0°–45°.
Zbiornik do odprowadzania chłodziwa i pojemnik na wióry umieszczone są w górnej części maszyny. Do zbiornika przymocowany jest żeliwny stół roboczy, który wyposażony jest w imadło do mocowania materiału i do którego przymocowane jest ramię piły taśmowej.
W dolnej części podstawy maszyny znajdują się otwory na osie kółek. Bezpieczeństwo podczas procesu cięcia zapewnia instalacja elektryczna spełniająca wszystkie wymagania CE. Maszyna wyposażona jest w wyłącznik krańcowy zatrzymujący pracę po zakończeniu procesu cięcia, przycisk awaryjny oraz szereg mikrowyłączników odcinających zasilanie np. przy otwarciu osłony pasa napędowego lub osłony taśmy tnącej. Dodatkowo, nasza maszyna — w przeciwieństwie do konkurencyjnych rozwiązań — wyposażona jest w szczotkę drucianą do oczyszczania taśmy, która zapobiega blokowaniu się brzeszczotu i umożliwia efektywniejsze cięcie.
UWAGA! DOSTĘPNE 3 SZTUKI:
1. MASZYNA POWROTNA, SERWISOWANA, ZMONTOWANA (poz. 519)
Hnodpfxowl Ea Tj Adqsu
2. MASZYNA POWROTNA, BRAK OPAKOWANIA, WGNIECONA OSŁONA SILNIKA, KOMPLETNA, ZMONTOWANA (poz. 518)
3. MASZYNA POWROTNA, BRAK OPAKOWANIA, WGNIECIONA OSŁONA SILNIKA I PASA, ZMONTOWANA (poz. 517)
iklan kecil

11.245 km
Bandsaw - horizontal
JAESPA250 GTH
JAESPA250 GTH
Hubungi
Kondisi: bekas, Tahun pembuatan: 2020, Cutting diameter: 250 mm
Saw band length: 3100 x 27 x 0.9 mm
Cutting capacity at 90 degrees (square): 220 mm
Cutting capacity at 90 degrees (flat): 280 x 190 mm
Band speed: 37 / 74 m/min
Saw motor: 1.5 kW
Machine weight: approx. 0.5 t
Space requirement: approx. 1.6 x 1.4 x 1.3 m
Hnodpfxewkvq Hs Adqju
Mitre band saw
- Semi-automatic
- Double mitre
- Material detection during lowering
iklan kecil

10.648 km
Bandsaw - horizontal
BIANCO370 M SA
BIANCO370 M SA
Hubungi
Kondisi: baru, msk-tmpl-001
Hnodpfswirpvex Adqsu
iklan kecil

10.648 km
Bandsaw - horizontal
BIANCO280 M SA
BIANCO280 M SA
Hubungi
Kondisi: bekas, Tahun pembuatan: 2023, Condition: Used
Year of manufacture: 2023
Stock number: 6242
Delivery time: Immediate, subject to prior sale
Country of origin: Italy
Price: €5,400
Available in stock: 1
Saw frame: Swivel frame
Saw blade dimensions: 2450 x 27 x 0.9 mm
Blade speed: 35/70 m/min
Cutting capacity 0° round: 220 mm
Cutting capacity 0° square: 220 mm
Cutting capacity 0° flat: 260 x 140 mm
Cutting capacity 45° round: 160 mm, square: 155 mm
Cutting capacity 60° round: 95 mm, square: 95 mm
Working height: 965 mm
Length: 1200 mm
Width: 1100 mm
Height: 1860 mm
Weight: 240 kg
Demonstration machine / as-new condition
Hodpfx Adjwiqpzjqjnu
Net price (list price €6,730.00)
Manual vise with quick-clamp lever
Descent by self-weight with adjustable damper
2 speeds
Coolant system
OPTIONS:
Roller conveyors and saw blades available on request
iklan kecil

11.168 km
Bandsaw - horizontal
ELMAGCY 260x200G
ELMAGCY 260x200G
Hubungi
Kondisi: baru, Cutting diameter: 260 mm
Saw band length: 2,455 mm
Max. cutting width: 260 x 200 mm
Saw band dimensions: 2,455 x 27 x 0.9 mm
Mitre range: 0 – 60°
Drive power: 0.75 / 1.1 kW
Cutting speed: 34 / 68 m/min
Hnodpswc D Azefx Adqou
Table height above floor: 900 mm
Machine weight approx.: 220 kg
Required space approx.: 1.45 x 0.72 x 1.05 m
NEW MACHINE
PRICE: 1,990.00 EUR + VAT
- Automatic lowering with control valve
- Quick-release vice
- Quick-action mitre clamp
- Mitre angle scale
- Oil bath for continuous lubrication
- Cooling system with electric pump
- Saw band wheels with precision bearings
- Saw band tracking adjustment
- Saw band tensioner with disc spring assembly
- Saw blade monitoring safety cut-out (SBÜ)
- Adjustable saw band guide at the front
- Adjustable tension bearings front/rear
- Swarf brush
- AutoOFF automatic shut-off
- Saw frame with tapered roller bearings
- Sheet steel base with chip tray
iklan kecil

11.175 km
Gergaji pita horizontal
JAESPAW 260 AZ
JAESPAW 260 AZ
Hubungi
Kondisi: bekas, Tahun pembuatan: 1994, Semi-automatic horizontal bandsaw for solid materials and profiles
Cutting capacity up to approx. Ø 260 mm
Hnedpfxewbfhcs Adqeu
Sturdy cast construction
Manual feed and hydraulic cutting cycle
Swiveling saw head for miter cuts
Integrated cooling system
Ideal for workshops and industrial use
iklan kecil

11.198 km
Gergaji pita
MEBAMEBAbase 24 DG-HS
MEBAMEBAbase 24 DG-HS
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Cutting diameter: 240 mm
Saw blade length: 2910 x 27 x 0.9 mm
Cutting width: 310 mm
Table height: 900 mm
Cutting speed: 35 + 75 m/min
Total power requirement: 1.1 / 1.8 kW
Machine weight: approx. 470 kg
Space requirement: approx. 800 x 1720 x 1450 mm
Standard equipment of the MEBAbase 24 DG-HS:
Hnodpfxowa Ui Te Adqsu
- MEBA mitering system: Large, swiveling table prevents the saw blade from cutting into the material support surface – resulting in low wear costs! The material is always clamped square to the saw blade.
- Manual miter adjustment from 90° to 30°, stepless via scale with 1.0° accuracy
- The miter pivot point is at the intersection between the saw blade and material support, therefore there is no change in length measurement when the angle changes
- End stops at 30° - 45° - 90° - 45°
- Hydraulic material clamping. The material is clamped parallel at 90° in any saw frame angle
- Centralized machine operation
- Cutting pressure reduction via the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section using a hydraulic damping cylinder and weight compensation spring
- Saw blade drive with end stop
- Stepless vise jaw adjustment
- Adjustable movable blade guide arm for material width
- Saw blade deflection pulleys with carbide guide
- Practical chip collection tray with drip screen
- Integrated chip cleaning brush
- Mechanical saw blade tensioning
- Operating instructions and spare parts list (digital)
- 1 MEBA bimetal saw blade 4/6 TPI mounted on the machine
- Complete coolant system
- Paint finish anthracite (RAL 7016)