Sebastian Justus Bewertung - Verwertung - Handel

Kondisi: bekas, mskr-23432314 Godpfx Ahoylckno Reip

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 125 t, 125 T C-frame servo press with 50 T ejector, DUPLOMATIC hydraulics Up to 40% reduced power consumption compared to conventional motors, thanks to servo-hydraulics. TECHNICAL DATA: - Pressing capacity: 20–125 T (adjustable) - Max. installation height: 1000 mm - Table usable area: 2200 x 750 mm - Ram usable area: 980 x 750 mm - Ejector cylinder capacity: 50 T - Ejector cylinder stroke: 200 mm - Frame type: C-frame - Guide column diameter: Ø 100 mm (4 pcs, at the corners) - Table height from floor: 870 mm Gisdpfx Ahox Aqtqe Rop - Overall dimensions approx. (W x D x H): 2400 x 2000 x 3300 mm - Weight approx.: 8,700 kg - Clamping device for tool centering: 50 mm diameter - Prepared for vibration-damping pads: 30 mm - Prepared for robot interface: yes HYDRAULIC CYLINDER: - Piston stroke: 0–700 mm (adjustable) - Max. working pressure: 245 bar - Return speed: 300 mm/sec - Ram speed at up to 25% load: 25 mm/sec - Ram speed at up to 50% load: 14 mm/sec - Ram speed at up to 80% load: 7 mm/sec - Ram speed at up to 100% load: 6 mm/sec - Idle speed: 300 mm/sec HYDRAULIC UNIT: - SERVO hydraulic pump (Brand: DUPLOMATIC): 143 L/min (1 pc) - SERVO motor output: 15 kW (1 pc) - Pressure accuracy during press stroke: +/- 5 bar - Pre-fill valve: NG-160

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 20 t, en-001 Gijdpjx Ap Utsfx Ah Rep

Kondisi: bekas, Tahun pembuatan: 1961, druck-025-t-technik Giedpsxukpcofx Ah Rsp

Kondisi: bekas, Tahun pembuatan: 1980, Jangkauan: 350 mm Stroke sekitar: 400 mm Diameter ram: 95 mm Gedpfsxgu Itjx Ah Rsip Gaya tekan: 25 t Kedalaman meja: 450 mm Lebar meja: 1.500 mm Tinggi meja: 900 mm Berat mesin sekitar: 2,5 t Kebutuhan ruang sekitar: 2,0 x 2,0 x 2,3 m Press lurus tunggal MÜLLER - CR 25.2.1 - Jam operasional: 543 jam - termasuk lampu kerja

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.700 mm, gaya penekanan: 25 t, lebar meja: 500 mm, panjang meja: 500 mm, berat keseluruhan: 2.000 kg, tabel jarak ke piston: 800 mm, panjang langkah: 500 mm, Perlengkapan: dokumentasi / manual, Dijual: 1 unit mesin press hidrolik bekas Produsen: VEB Werkzeugfabrik Zeulenroda WMW Tipe: PYE25/1 Berat total: 2 ton Gaya tekan nominal: 25 MP Langkah ram: 500 mm Jarak maksimum antara meja dan ram: 800 mm Meja: 500 x 500 mm Gedpfjxfzdljx Ah Rjip Termasuk dokumentasi

Kondisi: baik (bekas), Tahun pembuatan: 1988, nomor mesin/kendaraan: 053-019/35, 24591 Gsdowd Nybopfx Ah Roip

Kondisi: bekas, Tahun pembuatan: 1980, C-frame press. Machine no.: 52965 Pressure: 10 t Oil capacity: 110 liters +++++ Giodpovxlr Dofx Ah Rsp Please note that the machine is disassembled and ready for loading. For this reason, a powered demonstration or the production of a video is not possible. Furthermore, our listing contains the most informative photos of the best possible quality. Unfortunately, it is not possible to supply additional images. +++++

Kondisi: bekas, Tahun pembuatan: 2000, Pressure: 25 t Stroke: 150 mm Throat depth: 420 mm Installation height: 450 mm Table surface: 700 x 820 mm Table height above floor: 850 mm Ram surface: 600 x 600 mm Downward speed: from 370 mm/s Upward speed: 370 mm/s Working speed: 18 - 33 mm/s Gjdpfovut N Nsx Ah Roip Oil capacity: 300 l Drive power: 5.5 kW Weight: 5.8 t Space requirements approx. 1.1 x 2.0 x 2.4 m (LxWxH) Approved for manual loading operations according to CE standards. With electro-hydraulic drive, pressure/time and stroke-dependent controls, cut cushioning, mechanical depth stop, and two-hand operation.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 23.000 mm, lebar total: 7.800 mm, panjang total: 10.400 mm, gaya penekanan: 25 t, lebar meja: 780 mm, panjang meja: 200 mm, kecepatan operasi: 13 mm/dtk, kecepatan mundur: 24 mm/dtk, panjang langkah: 480 mm, tekanan kerja: 230 batang, kapasitas tangki oli: 20 l, daya: 3 kW (4,08 hp), Bengkel / mesin press MULTI-FUNGSI Tersedia dalam kapasitas 20 dan 25 ton. BAR-MAN 20: 3.450 euro BAR-MAN 25: 3.990 euro Gijdpot A Dznefx Ah Rop BAR-MAN dapat digunakan untuk berbagai aplikasi, seperti pekerjaan perawatan, pembuatan alur pasak, pemasangan dan pelepasan bantalan, dan masih banyak lagi. Dengan mesin yang kuat ini, Anda dapat menangani berbagai tugas dengan tetap bekerja secara nyaman.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1977, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 27.500 mm, lebar total: 10.500 mm, panjang total: 16.500 mm, gaya penekanan: 25 t, lebar meja: 630 mm, panjang meja: 500 mm, kecepatan operasi: 200 mm/dtk, berat keseluruhan: 2.400 kg, kecepatan mundur: 450 mm/dtk, lebar pelat tuas: 450 mm, panjang pelat penekan: 360 mm, jarak antara penyangga: 800 mm, panjang langkah: 500 mm, daya: 12,5 kW (17,00 hp), Hydraulic Press PYE 25 SS. Giodpfx Ahstzxvwj Rjp Year of manufacture: 1977. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: - Maximum pressing force: 25 tons - Working pressure: 16 MPa - Upper table: 450 x 360 mm - Lower table: 630 x 500 mm - Daylight: 800 mm - Cylinder stroke: 500 mm - Downward speed: 200 mm/sec - Upward speed: 450 mm/sec - Power requirement: 12.5 kW - Weight: 2,400 kg - Height: 2,750 mm; Length: 1,650 mm; Width: 1,050 mm The machine is in very good technical condition, after a major overhaul. It is possible to inspect and test the machine under power.

Kondisi: bekas, Tahun pembuatan: 1976, Pressing force 20 t Gisdotqqwuepfx Ah Rep Arm reach 185 mm Stroke 100 mm Table clamping surface 380 x 350 mm Installation height 250 mm Table height above floor 840 mm Total power requirement 4 kW Machine weight approx. 1.3 t

Kondisi: bekas, Single-column Hydraulic Press HYDRAP Type HPSK 25 Serial No. 6312 Year of manufacture: 1989 Pressing force: 25 tons Ram stroke: 500 mm Throat depth: 300 mm Installation height: 700 mm Table size: 1000 x 500 mm Table bore: Ø 210 mm Ram area: 400 x 360 mm Clamping bore: Ø 40 mm Table height above floor: 855 mm Rapid advance speed: 280 mm/sec Pressing speed: 3.5 mm/sec up to 25 mm/sec Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Gjdpjhrakvefx Ah Roip Electrical connection: 400 Volt, 50 Hz - Operation and programming via SIEMENS S5 with OP1 controller - Measurement system for stroke adjustment - Pressing speed steplessly adjustable via potentiometer - Pressure steplessly adjustable via manual pressure regulator - Short-stroke device - Mechanical tool clamping on ram with T-slots and clamping pin bore - Control cabinet with electrical control mounted on the machine - Two-hand operation and electrical connection for foot switch - Control unit prepared for electrical tool monitoring - Hydraulic and electrical schematics available Space requirement (L x W x H): 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Kondisi: baru, Tahun pembuatan: 2021, gaya penekanan: 17 t, Here are the technical specifications of the offered machine: If the press does not exactly match your requirements profile, please request a customized offer tailored to your needs with just one click: Contact us for an individual quotation HIDROBRASIL manufactures presses precisely to your specifications at surprisingly affordable prices! Technical data & information: Hydraulic 17 T C-Frame Press C-frame press with 17 T capacity, suitable for continuous shift operation, featuring these basic specifications: a) Working speed: 10 mm/sec downwards b) Opening speed: up to 25 mm/sec c) Pressing start speed: 10 mm/sec d) Table size: 400 x 400 mm e) Ram size: 200 x 200 mm, with T-slots and centrally mounted cylinder clamping f) Overall dimensions approx.: 1150 x 800 x 1750 mm g) Oil temperature indicator on oil tank h) Adjustable pressing force: 5 T to 17 T (adjustable via rotary control) i) Manual lever control with two speeds j) Machine body powder-coated or double painted k) Control cabinet cable entry from above with 3000 mm cable and 16 amp plug l) Setup, commissioning, and training available at additional cost Press Type: C-frame press Thermally neutral: 80–120°C Number of operator sides: 1 side Gijdpfjgrki Sex Ah Rjp Forces Pressing force max. (at 250 bar): 170 kN Max. free return force: 10 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions Max. opening width: 250 mm Stroke and min. opening: 100 mm Table height above floor: 850 mm Overall height (installation height): approx. 2200 mm Minimum hall height: 2,500 mm Parallel deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% occupancy ≤ 0.3 mm/m Weight Total weight of press (without operational fluids): approx. 1 metric ton Speeds Fast close: 10 mm/sec Pressing speed: 10–0 mm/sec Sound Pressure Sound pressure level, measured at 1.5 m height at the operator panel according to DIN 45635-T16-KL3 max.: 78 dB(A) Hydraulics Number of cylinders: 1 Operating pressure max.: 250 bar Pressure build-up time (pressing): 2 sec. Pressure accuracy during pressing stroke: +/- 5 bar Main Pump Gear pump: approx. 6 L/min Oil volume: approx. HLP 46 MW, 100 liters Ambient temperature max.: 40°C Oil temperature max.: 55°C Feed temperature: Electrical Main supply: 400 V AC Control voltage (hydraulic pumps): 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 2.2 kW Total connected load approx.: 3 kW Design The press is designed as an oil-hydraulic C-frame press. The hydraulic unit and tank are located on the top or on the press itself. Hydraulic unit The hydraulic system is mounted on top of the press. Safety Features The press, as described in this specification and scope of delivery, meets the current safety regulations according to UVV as well as all applicable EU standards and directives in their latest version. Electrical / Control The control cabinet with control, power, and safety components is located on the right side of the press. Operation is via a manual lever control. Control Cabinet Features Protection class: IP 54 Reserve space: approx. 20% Cooling: none Internal lighting: none Mode selector switch lockable: Yes

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0287, gaya penekanan: 25 t, Assembly/disassembly press with sliding table Pressing force: 25 t Clear width: 1,000 mm Stroke: 800 mm Approx. machine weight (without operating fluids): 4 t Dimensions (L x W x H): approx. 2,054 x 2,200 x 3,126 mm Return force: 2 t Motor power: 5 kW Gisdpefxyikofx Ah Rop Max. working height: 800 mm Max. feed speed: 80 mm/sec Pressing speed: 10 mm/sec Rapid traverse speed: 80 mm/sec Travel: 800 mm Ram plate: 400 x 400 mm Table plate: 1,000 x 800 mm Table height above floor: approx. 850 mm Table cutout: 650 x 150 mm Oil tank: 200 l Ram is stabilized by 4 each Ø 50 mm chrome-plated linear guides with bronze bushings Ram thickness: 122 mm Steel plate on spring-loaded rollers: 600 x 400 x 15 mm Control system: Siemens S7 1200 Schmersal light barriers: 1,800 mm above floor Monitor: Siemens, 10-inch Assembly table on the left side of the machine body with 10 mm precision-ground steel plates: 1,000 x 800 mm, 850 mm high The machine has a daylight opening of 800 mm. The ram is 400 x 400 mm, with a thickness of 122 mm.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Table dimensions: 650 x 650 mm Ram diameter: 140 mm (round) Stroke: 130 mm Gedpfx Ajfcw Apoh Reip Power requirement: 4 kW Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm