Metal-Handel

Kondisi: baru, Tahun pembuatan: 2023, jam operasional: 2 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 28.000 kN, diameter sekrup: 150 mm, volume langkah: 12.017 cm³, tekanan injeksi: 1.750 batang, Gaya penguncian 28000 kN Pelat penahan (t x l) 3005 x 2575 mm Jarak bebas (t x l) 2185 x 1755 mm Langkah pembukaan cetakan 3300 / 2100 mm Ketinggian pemasangan cetakan min./maks. 800/2000 mm Lebar pembukaan: 4100 mm Langkah pengeluaran - mm Gaya pengeluaran maju/mundur - kN Unit injeksi: Diameter sekrup 150 mm Csdpfx Adszinqyjcsrd Tekanan injeksi 1750 bar Volume injeksi 12017 ccm Berat injeksi (PS) 10935 gr Kecepatan putaran sekrup 94 1/menit Laju plastifikasi 1866 g/s Peralatan elektrohidraulik: Daya nominal motor pompa 75+55+75+18,5+7,5 kW Daya pemanas terpasang 133 kW Volume oli 2520 liter Dimensi dan berat: Luas yang dibutuhkan kira-kira 15,75 x 7,39 x 4,50 m Berat total 156000 kg Aksesori: - Elemen peredam getaran - Robot ABB - jangkauan kira-kira 3900 mm dan daya angkat 90 kg - Ban berjalan 6000 x 1000 mm - Pelat penahan magnet Stäubli - Mesin pencampur material Motan Peralatan tambahan: - 28 x kaskade hidraulik - Antarmuka robot sesuai Euromap 67 - 4 x inti hidraulik - 4 x katup inti pneumatik - 20 x katup udara - 96 x titik kontrol saluran panas

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Mesin injection Krauss Maffei KM 1300-12000 MX Robot LRX 350 Tahun produksi – 2015 Crjdpfxjzinane Adcsd Data teknis Unit Penutupan • Gaya penutupan: 13.000 kN (1.300 ton) • Gaya pembukaan: 910 kN • Dimensi pelat: 2.210 × 1.910 mm • Jarak antar kolom: 1.570 × 1.270 mm • Langkah pembukaan cetakan: 2.350 mm • Pembukaan maksimum: 3.050 mm • Tinggi cetakan: 700–1.400 mm • Langkah ejektor: 350 mm • Gaya ejektor: 250 / 125 kN Unit Injeksi • Diameter sekrup: 105 mm • Rasio L/D: 23 : 1 • Tekanan injeksi maksimum: 2.296 bar • Volume injeksi: 5.195 cm³ • Berat injeksi (PS): 3.689 g • Kecepatan injeksi: 99 mm/s • Kapasitas injeksi: 856 cm³/s • Kecepatan putar sekrup maksimum: 144 rpm • Kapasitas plastifikasi (PS): 130 g/s Perlengkapan Listrik • Daya motor pompa: 132 kW • Daya pemanas: 75 kW • Jumlah zona pemanasan: 7 • Kapasitas tangki oli: 2.440 l Dimensi • Berat mesin: 70 ton • Dimensi: 13,65 × 3,65 × 2,82 m Robot Krauss Maffei LRX 350 • Kapasitas angkat maksimum: 35 kg • Sumbu X: 1.200 mm (servo drive) • Sumbu Y: 1.000 / 1.000 mm, teleskopik (servo drive) • Sumbu Z: 3.500 mm (servo drive) • Sumbu C: 0–90°, penggerak pneumatik • Torsi sumbu C: 60 Nm • Sistem pengukuran posisi absolut

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 81.000 h, Data teknis Tahun pembuatan: 2007 Sisi penutup Gaya penutup: 1300 t Maks. jarak bukaan/t tinggi pemasangan: 2300 mm Jarak maksimum pelat penjepit: 4000 mm Tinggi pemasangan cetakan min./maks.: 1000 - 1700 mm Tinggi maksimum pelat penjepit: 1910 mm Ukuran cetakan minimum: 1000 - 1700 mm Jarak bebas antar tiang: 1500 mm Radius nosel: R40 mm Cedpfxozgv Uuj Adcsrd Berat cetakan: 29000 kg Stroke ejector: 350 mm Sisi injeksi Diameter screw: 135 mm Volume langkah: 8588 cc Core puller AWS/DS: 1/1 Penutup jarum pneumatik: 1 Mesin dikirim bersama robot Kuka dan dapat dilihat dalam operasi produksi.

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 67.092 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 10.000 kN, diameter sekrup: 120 mm, volume langkah: 5.655 cm³, tekanan injeksi: 1.632 batang, panjang total: 11.600 mm, lebar total: 2.900 mm, tinggi total: 2.500 mm, berat keseluruhan: 76.500 kg, 6233527 Codezgt Ryopfx Adcjrd

Kondisi: baru, Tahun pembuatan: 2025, 1 Crsdpfxsy Umpuj Adced

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, gaya penjepit: 1.700 kN, Spannkraft: 1700 t Schraubendurchmesser: 105 mm Abstand zwischen den Stützstreben V: 1420 mm Abstand zwischen den Stützsäulen H: 1870 mm Schussvolumen: 3721 cm³ Typ: Horizontal Crsdpfjy Uk Emox Adced Antrieb: Hydraulisch KUKA-Roboter 6 Achsen Maschine neuwertig!

Kondisi: baik (bekas), Tahun pembuatan: 2007, Data Teknis – Informasi Umum 1. Pabrikan: ENGEL 2. Model: DUO 7050 / 1000 3. Kontrol: CC200 4. Tahun pembuatan: 2007 5. Jam operasional: 100.145 jam Unit Penahan 1. Gaya penjepit: 10.000 kN (1.000 ton) 2. Jarak antar batang pengikat (H × V): 1.400 × 1.150 mm 3. Ukuran pelat (H × V): 1.850 × 1.810 mm 4. Tinggi cetakan (min./maks.): 578 – 1.678 mm 5. Langkah pembukaan: 2.100 mm 6. Jarak bebas (EBH): 1.000 mm 7. Sentrisasi (pelat tetap/bergerak): Ø 250 mm Perlengkapan Unit Penahan Crsdpfxjy Ukfmo Adcjd 1. Core pull: 2. Pelat tetap: 3 3. Pelat bergerak: 3 4. Katup udara: 5. Pelat tetap: 1 6. Pelat bergerak: 1 7. Sistem penjepit cetakan magnetis: Ya Berat Maksimal Cetakan 1. Berat total maksimal cetakan: 21.000 kg 2. Berat maksimal cetakan pada pelat bergerak: 14.000 kg Unit Injeksi 1. Diameter ulir: 105 mm 2. Volume injeksi: 4.160 cm³ 3. Tekanan injeksi spesifik maksimal: 2.090 bar 4. Kapasitas plastifikasi (PS): 112 g/s 5. Kecepatan maksimum ulir: 150 rpm 6. Penggerak ulir: elektrik 7. Permukaan ulir: diperkuat dan dinitridasi 8. Silinder: Bimetal M3 Nozzle 1. Diameter bukaan nozzle: 8,0 mm 2. Radius nozzle: R35 mm 3. Kedalaman masuk nozzle: 50 mm 4. Diameter luar maksimal nozzle: 60 mm KUKA robot dengan 6 sumbu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8673 0023, gaya penjepit: 15.000 kN, diameter sekrup: 145 mm, tekanan injeksi: 1.454 batang, lebar pelat: 1.880 mm, tinggi pelat: 2.150 mm, Regularly serviced machine – refer to repair history Csdpfey T Hy Dox Adcsrd TECHNICAL DETAILS Clamping force: 15,000 kN Mounting platen dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between tie bars (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm – 1,400 mm Maximum opening stroke: 2,900 mm Control system: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Pump motor rated power: 165 kW Heating capacity: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 kg Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and barrel 2015: Ibed replaced 2015: Wiring board replaced 2017: Motor and pump 2 replaced 2017: Injection cylinder BS piston rod replaced with new seals 2017: Circulation pump for oil cooler replaced 2017: Teach box replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil changed 2019: Injection valve replaced 2019: Dosing inverter overhauled by Eichler 2021: Motor P1 replaced 2022: New RSP EQUIPMENT - Wittmann W 753 robot – 2008 - Safety cage and conveyor belt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 11.000 kN, diameter sekrup: 120 mm, tekanan injeksi: 1.758 batang, berat injeksi: 6.175 g, langkah pembukaan: 2.000 mm, KraussMaffei KM 1100–12000 MX incl. WITTMANN Robot! TECHNICAL DETAILS Clamping force: 11,000 kN Opening force: 770 kN Platen size (H × V): 2,210 × 1,910 mm Tie bar distance (H × V): 1,550 × 1,250 mm Opening stroke: 2,000 mm Mold height (min. - max.): 600 - 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s MACHINE DETAILS Electrohydraulic configuration Rated power of pump motors: 132 kW Installed heating capacity: 82 kW Number of heating zones at cylinder: 7 Dry cycles (Euromap): 802 1/h Oil tank capacity: 2,440 l Dimensions & Weight Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Net weight incl. control cabinet: 73 t EQUIPMENT Robot: Wittmann Credpfxoy T Hd Ns Adcsd MC5 control system with color monitor, integrated control panel, and three USB ports

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 7.148 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 252315, gaya penjepit: 17.000 kN, diameter sekrup: 120 mm, volume langkah: 7.729 cm³, tinggi cetakan (min.): 800 mm, gaya ejektor: 230.000 N, lintasan ejektor: 300 mm, langkah pembukaan: 2.550 mm, panjang pelat: 2.420 mm, lebar pelat: 2.170 mm, tekanan: 2.300 batang, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, For sale: Modern and fully equipped production cell comprising a hydraulic injection molding machine ENGEL DUO 12060/1700 and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and elements requiring high quality standards. ENGEL DUO 12060/1700 Injection Molding Machine Codpfx Adjy Tuhiscjrd Key specifications: - Clamping force: 17,000 kN (1,700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7,729 cm³ - Injection pressure: up to 2,300 bar - Injection rate: up to 1,875 cm³/s - Opening stroke: 2,550 mm - Maximum platen spacing: 3,350 mm - Platen dimensions: 2,420 × 2,170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish/English Machine features: - ENGEL ecodrive servo-hydraulics energy-saving system - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Full set of Euromap interfaces - Enhanced mold cooling system - Special configuration for the automotive sector - Polish documentation - Special ENGEL industrial paint finish Included: ENGEL VIPER 60 RC300 Integrated Robot Complete automation system fully integrated with the machine. Robot specifications: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm - Y-axis stroke: 2,600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 belt conveyor included - Complete set of safety enclosures

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 14.650 h, gaya penjepit: 1.100 kN, volume langkah: 350 cm³, tekanan injeksi: 1.455 batang, berat keseluruhan: 60.000 kg, diameter konveyor sekrup: 50 mm, Dasar Pengiriman: ex lokasi Csdpoy R Eq Aefx Adcord Waktu Pengiriman: sesuai kesepakatan Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: bekas, Tahun pembuatan: 2018, de-to-en-mechanical Crsdpjy I R Tqsfx Adcjd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13,000 Tie bar distance (H x V) [mm]: 1,570 x 1,270 Platen dimensions (H x V) [mm]: 2,210 x 1,910 Min./Max. mould height [mm]: 700–1,400 Max. daylight opening [mm]: 3,050 Max. ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5,195 Shot weight PS [g]: 4,728 Injection pressure [bar]: 2,296 Max. injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Pump motor rated power [kW]: 132 Screw drive motor rated power [kW]: 145 Heater capacity [kW]: 71 Dimensions and weight: Net weight incl. control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Cjdpey Hqwyofx Adcjrd Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Cores: 3 hydraulic circuits (2 on the moving platen, 1 on the fixed platen) Pneumatics: 2 air valves (blow-off) + 1 valve for hot runner shut-off nozzle Hydraulic accumulator Cooling: 20 rotameter cooling circuits (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 13.000 kN, KM1300-8100MX-2016 Csdpfoy Emurox Adcord

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, gaya penjepit: 11.772 kN, diameter sekrup: 130 mm, berat injeksi: 6.210 g, berat keseluruhan: 70.000 kg, Hydraulic injection moulding machine from 2011. This ITALTECH KS 1200 8300 ES is equipped with a 130 mm screw diameter and offers a clamping force of 11,772 kN. The shot volume is 8,630 cm³ and maximum injection pressure is 1,460 bar. If you are looking for a high-quality injection moulding machine, consider the ITALTECH KS 1200 8300 ES we have available for sale. Please contact us for further details. Injection Unit • Injection unit size: 8300 • L/D ratio: 20 Credpfx Adoy Dua Tjcjd • Theoretical shot volume: 8,630 cm³ • Maximum injection pressure: 1,460 bar • Injection flow rate: 1,200 cm³/s • Screw rotation speed: up to 110 rpm • Screw torque: 8,400 Nm • Plasticising rate (HDPE): 140 g/s • Heating capacity: 79 kW • Temperature control zones: 5 + 1 Clamping Unit • Clamping force: 11,772 kN (~1,200 t) • Opening force: 300 kN • Opening stroke with minimum mould height: 2,000 mm • Opening stroke with maximum mould height: 1,400 mm • Mould height: 600–1,200 mm • Maximum daylight: 2,600 mm Platen & Ejector • Platen size (W x H): 1,900 x 1,770 mm • Tie bar distance (W x H): 1,250 x 1,120 mm • Tie bar diameter: 220 mm • Ejector force: 226 kN • Ejector stroke: 300 mm Power & Consumption • Pump motor power: 180 kW • Installed power: 265 kW • Oil tank capacity: 1,800 l Performance • Dry cycle time: 10 s

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 4.517 h, gaya penjepit: 16.000 kN, diameter sekrup: 125 mm, berat injeksi: 7.450 g, Mesin cetak injeksi hidrolik 3-sumbu Krauss Maffei 1600-17200MC ini diproduksi tahun 2001. Mesin ini memiliki gaya penutupan sebesar 16.000 kN dan diameter sekrup 125 mm. Mesin mampu menangani berat tembakan maksimum hingga 7.450 g dengan ukuran plat 2.600 x 2.110 mm. Jika Anda mencari kapasitas cetak injeksi berkualitas tinggi, pertimbangkan Krauss Maffei 1600-17200MC yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. • Unit injeksi: 17200 • Jarak antar kolom (H × V): 1600 × 1250 mm • Ukuran plat (H × B): 2600 × 2110 mm • Ruang bebas (x × y): 1800 × 1400 mm • Maks. langkah pembukaan cetakan: 2.500 mm • Tinggi pemasangan cetakan (min.–maks.): 900–1.600 mm • Lebar pembukaan: 3.400 mm • Gaya pembuka cetakan: 1.108 kN • Gaya plat bergerak: Buka 177 kN / Tutup 153 kN Cjdpfx Adoyyyr Tecerd • Langkah ejector: 300 mm • Gaya ejector (maju/mundur): 415 / 177 kN • Tegangan operasi: 400 V / 50 Hz • Arus motor: 446 A • Arus pemanas: 164 A • Total jam operasi pompa: 73.761 jam Perlengkapan tambahan • Sistem robot Wittmann W650 (2001) • Stroke X 1.500; Y 2.600; Z 3.500 • Set silinder/pengganti sekrup cadangan (1x) • Sistem pendingin internal • Penarik inti (2x)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, jam operasional: 111.569 h, gaya penjepit: 10.000 kN, This Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. The system includes an optional REMAK RE-CNC 6-axis robot with a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine features a maximum injection pressure of 185 bar and a dosing stroke of approx. 465 mm. If you are looking for a high-quality injection moulding machine, the Krauss Maffei 1000-8000 M is a compelling option, currently offered for sale. Contact us for further details. • Injection Unit • Screw speed: 92 rpm • Injection speed stages:  • 25% → 23 mm/s  • 50% → 46 mm/s  • 75% → 69 mm/s  • 100% → 92 mm/s • Injection stroke: 200 mm forward motion actually used for the shot • Injection pressure limit: 185 bar • Hydraulic System • Pump differential pressure: 10 bar • Pressure circuits:  • Main pressure: 250 bar  • Injection pressure: 185 bar  • Hydraulic circuit: 150 bar  • Secondary pressure: 120 bar  • Auxiliary pressure: 50 bar • Clamp pressure drop: approx. 4-6 bar/min • Proportional valve pressure ranges:  • Minimum: 50 bar  • Maximum: 150 bar • Spindle speed: 92 rpm Crjdpfxjywlvrs Adcjd • Heating System • Number of heating zones: 9 • Typical cylinder heater ratings: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Supported operating voltages: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. -1 K to +2 K • Condition / maintenance-relevant data • Machine alignment tolerance:

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Injection Moulding Machine KRAUSS MAFFEI KM 1100-12000 MX Basic Specifications Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: colour screen integrated with the operator console Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticising unit for thermoplastics processing with abrasion protection. Codpfx Adoyugfzscerd Clamping Unit Clamping force: 11,000 kN Mould opening force: 770 kN Platen dimensions (horizontal × vertical): 2210 × 1910 mm Tie bar spacing (horizontal × vertical): 1550 × 1250 mm Mould opening stroke: 2000 mm Minimum mould height: 600 mm Maximum mould height: 1200 mm Platen stroke: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1758 bar Injection volume: 6786 cm³ Shot weight (PS): 6175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1118 cm³/s Injection rate (with accumulator): 1696 cm³/s Electrical and Hydraulic Equipment Rated pump motor power: 132 kW Installed heating power: 82 kW Number of barrel heating zones: 7 Dry cycle time (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2440 l Machine Dimensions and Weight Net weight (incl. control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor speed to current demand throughout the production cycle. Key Benefits - Reduction of electricity consumption by up to 30% - Hydraulic pump servo drive technology - Globally recognized, proven technology applied in plastics processing industry - Decreased energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system enables significant reduction of operating costs while maintaining full production performance parameters.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, DEMAG System 1500/1500-16000 Injection Moulding Machine Basic Data Codpoyugalefx Adcjrd Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Platen dimensions (horizontal × vertical): 2,150 × 1,880 mm Tie bar spacing (horizontal × vertical): 1,500 × 1,250 mm Minimum mould height: 700 mm Maximum mould height: 1,400 mm Maximum opening stroke: 2,900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1,454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net weight of machine: 74 t Weight of control cabinet: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring plate 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod (BS) with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor by using a frequency converter, adjusting the motor’s rotational speed according to the machine’s actual requirements during the production cycle. As a result, electrical energy is consumed only when it is truly needed. Key Benefits - Reduction in electrical energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class, proven technology used in the plastics processing industry - Reduction of energy losses during machine idle times - Lower heating of the hydraulic system - Extended service life of the motor and hydraulic components - Possible retrofitting to existing hydraulic injection moulding machines The ESS system allows for significant reduction of operating costs while maintaining full production parameters.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine ENGEL DUO 11050/2300 Basic Data Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Clamping Unit Clamping force: 2,300 kN Crjdpfx Asyuf Tdjdcjd Platen dimensions (horizontal × vertical): 2,900 × 2,500 mm Tie-bar spacing (horizontal × vertical): 2,000 × 1,600 mm Minimum mould height: 700 mm Maximum mould height: 1,890 mm Maximum opening stroke: 3,800 mm Injection Unit Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Maximum injection pressure: 1,600 bar Dimensions and Weight Net machine weight: 113 t Control cabinet weight: 18 t Total weight: approx. 131 t Optional ESS Energy Saving System The machine can be equipped with a modern ESS (Energy Saving System) servo drive, which improves the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor speed to the actual demand during the production cycle. As a result, electric power is only drawn when truly needed. ESS System Benefits: - Reduction of energy consumption by up to 30% - Servo drive technology for the hydraulic pump - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle times - Lower heat build-up in the hydraulic system - Extended lifespan of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system significantly reduces machine operating costs while maintaining full production parameters.

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 99.161 h, gaya penjepit: 32.000 kN, diameter sekrup: 130 mm, berat injeksi: 8.100 g, panjang total: 4.900 mm, tinggi total: 4.200 mm, berat keseluruhan: 230.000 kg, sales-description-kraussmaffei-injection-molding-machine Cjdpfx Aoyt H Dhjdcord

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 98.806 h, gaya penjepit: 40.000 kN, diameter sekrup: 130 mm, berat injeksi: 8.100 g, panjang total: 4.900 mm, tinggi total: 4.200 mm, berat keseluruhan: 255.000 kg, de-EN-20240617-km4000-sales-ad Crodpsyt Hy Nofx Adcjd

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 101.215 h, nomor mesin/kendaraan: 23J01415, gaya penjepit: 23.000 kN, berat injeksi: 6.100 g, panjang total: 4.500 mm, tinggi total: 3.800 mm, berat keseluruhan: 205.000 kg, Two high-performance KraussMaffei injection molding machines are being offered for sale. The machines are KM 2300-14700 MC models, specifically engineered for high-volume production of large plastic components. Each unit features a clamping force of 23,000 kN, a screw diameter of 105 mm, and a maximum shot weight of 6,100 g. This makes them especially suited for manufacturing oversized parts and applications requiring substantial material throughput. Both systems come fully equipped with a comprehensive range of peripherals, including a KUKA KRC4 robot interface, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also part of the package. Machine details: Machine 1 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 6) - Year: 1998 - Operating hours: approx. 101,215 h Machine 2 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 9) - Year: 1997 - Operating hours: approx. 99,030 h Shared technical specifications: - Clamping force: 23,000 kN - Screw diameter: 105 mm - Maximum shot weight: 6,100 g - Machine weight: approx. 205,000 kg - Dimensions: - Depth: approx. 4,500 mm - Height: approx. 3,800 mm Codpfxeyt Hids Adcord Both machines have been in operation in an industrial production environment and offer a reliable, proven solution for plastics processing companies looking to expand their large-part injection molding capabilities.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, en001 Cedeyrrwkjpfx Adcjrd

Kondisi: baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 16.000 kN, Perlengkapan: dokumentasi / manual, machine_spec_001 Crjdpfxeyh I Emo Adcsd