Auto Rühle Karosseriebau und Lackiererei GmbH

Kondisi: bekas, Mesin Pemotong Plasma HYPERTHERM Tipe Max 100 No. Mesin: 70-2513 Tahun Pembuatan: 1990 Daya: 100 Amp. = 80% ED 89 Amp. = 100% ED Kapasitas pemotongan hingga ketebalan pelat 32 mm Rentang pengaturan tanpa tingkat Panjang paket selang: 22 meter Koneksi udara bertekanan: 4,7 bar Koneksi listrik: 400 Volt, 50 Hz, steker 63 Amp - Paket selang torch dengan torch batang tanpa saklar untuk operasi robot - Saklar pemicu terpisah untuk menyalakan mesin pemotong plasma Dimensi ruang yang diperlukan (P x L x T): 850 x 700 x 1100 mm Berat: 225 kg Kodpfjyah Saox Aa Nedg kondisi baik

Kondisi: bekas, Perangkat Pemotong Plasma, Mesin Pemotong Plasma MESSER GRIESHEIM Tipe Plasmastar HA 95 No. Seri 4040323, Tahun Produksi 1990 Daya: 95 Amp - 60% ED, 45 Amp - 70% ED Kjdpfx Asyah R Noa Nedg Rentang pengaturan: 2 tingkat Kapasitas pemotongan: 25 mm (potongan bersih) Potongan terpisah: maks. 45 mm Torch manual PHC 95/140 Koneksi listrik: 380 Volt, 50 Hz, steker 32 Amp - Pendingin air - Torch manual baru BINZEL ABICOR, Tipe Abiplas Cut 200 W - Panjang paket selang 6 meter - Buku panduan operasi Kebutuhan ruang (P x L x T): 900 x 480 x 850 mm Berat: 160 kg Kondisi sangat baik

Kondisi: bekas, Tahun pembuatan: 2008, lebar total: 2.400 mm, panjang total: 8.000 mm, tinggi total: 2.500 mm,

Kondisi: bekas, Tahun pembuatan: 2011, lebar total: 2.400 mm, panjang total: 4.500 mm, tinggi total: 2.200 mm, 1 Kedjxrz Hmopfx Aa Njdg

Kondisi: bekas, Tahun pembuatan: 2000, lebar total: 2.000 mm, panjang total: 6.500 mm, tinggi total: 2.000 mm, de-hu-01 Kedpjxrzl Aofx Aa Njdg

Kondisi: siap digunakan (bekas), Dari likuidasi perusahaan: Hypertherm Powermax 1650G. Unit telah diuji fungsinya! Dengan paket torch sepanjang 8 meter. 380 Volt. Daya 30-100 Ampere. Potong berkualitas hingga sekitar 35 mm. Potong pemisah hingga sekitar 45 mm. Termasuk beberapa nosel cadangan (lihat foto). Torch dan kabel massa telah diperbaiki dengan isolasi tape di beberapa titik (lihat foto). Kedpfx Aexq Rbdja Nsdg

Kondisi: siap digunakan (bekas), Dari pembubaran perusahaan: Kdodpexq N Trefx Aa Nog Hypertherm Powermax 1000G Unit telah diuji fungsi! dengan paket torch 10 meter pada trolley 380 Volt Daya 20-60 Ampere Potong berkualitas hingga sekitar 22 mm Potong pisah sekitar 30 mm + beberapa nozzle cadangan (lihat foto)

Kondisi: bekas, Mesin pemotong plasma Harris Tipe Plasma Cutting H 35 A No. mesin Tahun pembuatan sekitar 1994 Daya 35 Amp. Kapasitas potong sekitar 4 mm Panjang paket selang sekitar 7 meter Kdodexciumepfx Aa Nog Koneksi udara tekan sekitar 6 bar - dengan pressure reducer Koneksi listrik 380 Volt, 50 Hz Ukuran (P x L x T): 550 x 400 x 960 mm Berat sekitar 50 kg Kondisi baik

Kondisi: baru, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: PB-S80 W-2 .11.844.921.21035/10, arus pemotongan: 300 A, panjang paket selang: 1.500 mm, panjang kerja: 1.500 mm, Paket selang torch baru Kjellberg PB-S80 W-2 .11.844.921.21035/10 untuk sistem plasma Fine Focus 800. Harga baru saat ini: €8.600 – €6.500. Paket selang masih baru dan belum digunakan, hanya untuk uji pemotongan pertama. Panjang paket selang adalah 1,5 m. Kdodpfexbqdyex Aa Nog

Kondisi: baru, Cutting range for steel up to 15.0 mm thickness (separation cut) Cutting range for steel up to 10.0 mm thickness (quality cut) Output at 100% duty cycle: 25.0 amperes Cutting medium: compressed air Output current adjustable from 20 - 40 amperes Voltage: 230 V Air consumption: 230 l/min. Input power: 4.9 kW Weight: 8.0 kg Dimensions (L x W x H): 505 x 147 x 305 mm The Avalon 40.1 is a lightweight, portable plasma cutting system with high cutting performance and superior cut quality. Its low weight and ease of handling make it the ideal choice for trades, workshop and industrial applications. Cuts carbon steel, stainless steel, aluminium, copper, etc. Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency Kdodpfsxaavcjx Aa Njg - Manual switch for activating the airflow, allowing adjustment of test air pressure without having to trigger the torch - Powerful compact unit - Intelligent protection function to safeguard the plasma torch against damage, e.g. incorrect air pressure, missing consumables, pilot arc overload Maximum separation cut for carbon steel: 15.0 mm Optimal cutting thickness: - Carbon steel: 10.0 mm - Stainless steel: 10.0 mm - Aluminium: 6.0 mm - Copper: 5.0 mm Special equipment included: - 1x earth cable, 3 m - 1x hand plasma torch // PT-60/6 with coaxial cable

Kondisi: baru, Cutting capacity in steel up to 35.0 TS mm Cutting capacity in steel up to 25.0 QS mm Kdedpfjxaaicjx Aa Nsg Current 20 - 65 Amps Cutting medium: compressed air Voltage: 400 V Input power: 7.8 kW Weight: 51.5 kg Dimensions (L-W-H): 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting – clean and reliable The Avalon 65 AIR air plasma cutter with integrated compressor is your reliable partner for demanding applications. Perform separation cuts in materials up to 18 mm thickness with the Avalon 65 Air. Features: - IGBT technology - Integrated compressor - Microprocessor control system for outstanding and dynamic arc characteristics - CNC interface - HF-free arc starting for increased reliability and low EMF exposure - Manual switch to activate airflow for setting test air pressure without having to trigger the torch - Intelligent protection function safeguards the plasma torch from damage, such as incorrect air pressure, missing consumables, or pilot arc overload. * Max. cutting thickness mild steel = 35 mm * Optimum cutting thickness mild steel = 25 mm * Stainless steel = 25 mm * Aluminium = 20 mm * Copper = 14 mm Special equipment included: - 1x earth cable, 3 m - 1x hand plasma torch // PT-60/6 with coaxial cable

Kondisi: baru, Cutting range for steel up to 12.0 mm (shear cut) Cutting range for steel up to 8.0 mm (quality cut) Performance at 100% duty cycle: 30.0 Amps Cutting medium: compressed air Output current: 20 - 40 Amps Input power: 4.9 kW Voltage: 230 V Kedpjw U U Tgsfx Aa Nsdg Weight: 17.9 kg Dimensions (L x W x H): 480 x 210 x 340 mm The Avalon 40.1 is a lightweight, portable plasma cutting system that delivers high cutting performance and excellent cut quality. Its low weight and easy handling make it an ideal choice for trades, workshops, and industry. Suitable for cutting carbon steel, stainless steel, aluminum, and copper. Features: - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating airflow to set test air pressure without needing to activate the torch - High-performance compact unit - Intelligent protection function safeguards the plasma torch against damage from issues such as incorrect air pressure, missing consumables, or pilot arc overload Maximum severance cut for carbon steel: 12.0 mm Optimal cutting thickness: - Carbon steel: 8.0 mm - Stainless steel: 8.0 mm - Aluminum: 4.0 mm - Copper: 3.0 mm Special equipment included: - 1x earth cable, 3 m - 1x hand cutting torch PT-60/6 with coaxial cable

Kondisi: bekas, Tahun pembuatan: 1996, plasma-schneiden-saf-1996 Kdodpew Dpi Nofx Aa Nog

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11.825.150/ 08065 6, tegangan masuk: 400 V, lebar total: 540 mm, panjang total: 960 mm, tinggi total: 1.050 mm, berat keseluruhan: 196 kg, TECHNICAL DETAILS Continuously adjustable: 10–160 A Duty cycle: 100% at 160 A Input voltage: 400 V, 3-phase, 50 Hz Connected load: 38 kVA Fusing: T 50 A "C" Gases Plasma gas: O₂, air, nitrogen, argon/hydrogen Swirl gas: N₂, O₂, forming gas F5 Marking gas: argon Kdsdpowyazhjfx Aa Njg MACHINE DETAILS Electrical Details Mains connection: 3~ 50 Hz Input voltage: 400 V Input current: 47 A Dimensions & Weight Dimensions (L x W x H): 960 x 540 x 1,050 mm Weight: 196 kg

Kondisi: baik (bekas), Plasma cutting unit, remote current control device, current selector switch -Manufacturer: Hypertherm, Remote Current Control Unit, current selector switch -Type: 073045 from plasma cutting system HT2000LHF Kodpfx Aowqlxgsa Nedg -Dimensions: 230/165/H70 mm -Weight: 1.1 kg

Kondisi: baik (bekas), Plasma cutting unit, plasma cutter for plasma cutting system - Manufacturer: Hypertherm, gas console for plasma cutting unit - Type: 073239 from HT2000LHF plasma cutting unit - Dimensions: 295/175/H370 mm Ksdpfowpg I Tox Aa Nodg - Weight: 9.9 kg

Kondisi: baik (bekas), Tahun pembuatan: 2003, Plasma cutting device, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, geared motor -Manufacturer: CR Electronic S.R.L / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation Type PAT3B-S4-SRM50 -Individual components: see photos -Quantity: 2x drive units available -Offer/Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/unit Kodewkqmispfx Aa Nedg

Kondisi: baik (bekas), Plasma cutting system, plasma cutter for plasma cutting installation - Manufacturer: Hypertherm - Model: HySpeed HT2000LHF - Equipment: Includes torch package and cutting nozzle head Kdodowd Tg Sopfx Aa Nog - Maximum cutting current: 200 A - Dimensions: 1100/720/H1040 mm - Weight: 459 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, PLASMA CUTTING - HYPERTHERM 130XD Kdodpfx Aev Ex A Aea Nsg

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: Arus searah (DC), panjang meja: 600 mm, lebar meja: 600 mm, This is a portable CNC cutting system from the renowned manufacturer Thermacut: Input voltage: (VAC) 230V / 120V, 50/60 Hz, 180 W, 0.5 A Max. cutting area: 3050 × 1525 mm Max. cutting speed: 3000 mm/min Vertical stroke: 100 mm Oxy-fuel cutting capacity: up to 100 mm Plasma cutting capacity: up to 35 mm Plasma interface: Yes Torch height control via arc voltage Total weight: 145 kg Scope of delivery: Oxy-fuel torch, nesting software, operating manual Mini cutting table: compact, portable, and robust equipped with a water tank for water cutting Kdjdpfxev Ai T Ho Aa Neg 600 × 600 mm cutting area replaceable grate with drain valve lightweight (only 108 kg) built-in lockable casters maximum material load 400 kg Can be purchased with plasma unit and torch on request!

Kondisi: baik (bekas), Tahun pembuatan: 1997, nomor mesin/kendaraan: 71-000988, Offer 24820 Technical Data: - Cutting current continuously adjustable: 30 – 100 A - Duty cycle: 80 A / 100% duty cycle, 100 A / 80% duty cycle - Max. cutting thickness: - Steel: approx. 32 mm - Aluminium: approx. 25 mm - Stainless steel: approx. 55 mm - Air connection: 5 bar - Gas mixing unit - Power connection: 400 V / max. 14.5 kVA - Space required: approx. W 800 x H 1650 x D 700 mm Kjdovqbdyjpfx Aa Nsdg - Weight: approx. 250 kg

Kondisi: bekas, en-001-2024 Kdjdpfsu Nwfuox Aa Nsg

Kondisi: sangat baik (bekas), For sale: Hypertherm Powermax 800 plasma cutter in very good condition. /////Price listed per unit///// Hypertherm Powermax 800 Plasma Cutter Plasma Cutter Description: Kdodeulc Ixepfx Aa Njg The Powermax800 plasma cutting system utilizes an inverter power supply to provide smooth DC output voltage, ensuring excellent cutting and gouging quality on mild steel, stainless steel, aluminum, and other metals. The Powermax800 power supply delivers a variable, constant output current from 20 to 50 amps, offering optimal performance across all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and sever metals up to 1 inch (25 mm) thick.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 285033, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, jenis pendinginan: udara, berat keseluruhan: 25 kg, sekring listrik: 32 A, arus pemotongan: 105 A, panjang paket selang: 6.000 mm, ketebalan pelat baja (maks.): 50 mm, kebutuhan udara: 15 m³/jam, tekanan udara: 5,8 batang, jenis perlindungan (kode IP): IP23, tinggi produk (maks.): 50 mm, High-end air plasma cutting unit for manual cutting applications. Although the system is equipped with a hand-held cutting torch, it can also be used for mechanized cutting. The CNC cutting interface is already integrated. The scope of delivery includes the hand-cutting torch with a 6-meter length. Kodperq E R Ujfx Aa Nedg The unit was operated in our application center for demonstration purposes. In practice, the unit has less than 30 minutes of cutting time. For further technical details, please refer to the attached document/data sheet.

Kondisi: baik (bekas), UTP-PLASMA 850 PROFESSIONELLES PLASMASCHNEIDGERÄT Mit 2 Schnittstufen Kdedpfjh U Df Sjx Aa Neg