Robert Bosch GmbH

Kondisi: bekas, Tahun pembuatan: 2023, nomor mesin/kendaraan: 855-23-01, kecepatan spindel (min.): 10 rpm, kecepatan spindel (maks.): 250 rpm, tinggi total: 1.600 mm, lebar total: 2.500 mm, panjang total: 11.000 mm, berat keseluruhan: 4.000 kg, kecepatan rotasi (min.): 416 rpm, kecepatan rotasi (maks.): 250 rpm, Data Mesin Ukuran pemasangan: ca. 10.000 × 2.500 × 1.600 mm Berat: ca. 3.000 kg Kapasitas Diameter luar maks.: 650 mm Maks. langkah/perjalanan: 4.500 mm Panjang proses honing maks.: 4.000 mm Data kinerja Kecepatan putar: 10–250 rpm Daya penggerak (rotasi): 4 kW Kecepatan langkah: 1–25 m/menit Daya penggerak (langkah): 3 kW Data pneumatik Tekanan udara (min.): 5 bar Tekanan udara (maks.): 9 bar Sistem: unit pengumpan pneumatik (kontrol gesekan otomatis) Kontrol / Teknologi HMI: SIMATIC HMI Data teknis Tegangan: 400 VAC Tegangan kontrol: 24 VDC Frekuensi: 50 Hz Arus sambungan: 63 A Kesesuaian: CE Sistem pendingin Volume tangki: 1.000 l dengan sistem filtrasi Berat Berat bersih: ca. 3.500 kg Bdsdpfx Alsy H I Ipoaob Berat kotor: ca. 4.000 kg Ukuran transportasi Dimensi: ca. 11.000 × 1.000 × 2.100 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, jam operasional: 38.800 h, kecepatan spindel (maks.): 4.000 rpm, tinggi total: 15.100 mm, lebar total: 3.650 mm, berat keseluruhan: 2.995 kg, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 800 mm, daya motor spindle: 22.500 W, panjang produk (maks.): 4.330 mm, berat alat: 15.000 g, jumlah sumbu: 3, This 3-axis universal machining center MAHO 1600S was manufactured in 1989. It has approximately 38,800 operating hours and was in use until 2025 without any significant issues. The machine features a functional coolant system and is supplied with available manuals and documentation. If you are looking for high-quality machining capabilities, you should consider the MAHO 1600S we have for sale. Contact us for further details. Bsdey Hizwspfx Alasdb • Main spindle drive power kW: 22.5 • Tool interface: ISO 50 • Tool clamping force kN: 23 • Spindle speed range rpm: 20–4,000 • Spindle speed override %: 80–120 • Feed rate X/Y/Z mm/min: 1–4,000 • Minimum programmable feed mm/min: 0.01 • Rapid traverse m/min: 10 • Feed and rapid traverse override %: 0–140 • Tool magazine capacity: 36 • Tool holder: ISO 7388 Type B • Max. tool diameter mm: 160/210 • Max. tool diameter (adjacent free pockets) mm: 125 • Max. tool length mm: 400 • Max. tool weight kg: 15 • Compressed air approx. bar: 7 • Table size mm: 980×1800 • T-slot distance mm: 100 • Max. workpiece weight kg: 3,000 • Voltage V: 220/380 • Frequency Hz: 50 • Total connected load kVA: 37.5 • Total load with coolant system kVA: 45.0 • Positioning resolution mm: 0.001 • Last year in operation: 2025 • Condition: Ran without significant problems until 2025 • Documentation: Manuals available • Coolant system: Present and functional • Tool changer/chain magazine: Not included

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1985, jam operasional: 29.192 h, kecepatan spindel (maks.): 4.000 rpm, tinggi total: 2.988 mm, lebar total: 4.288 mm, berat keseluruhan: 9.000 kg, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 800 mm, panjang produk (maks.): 4.152 mm, jumlah sumbu: 3, This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 operating hours and comes with manuals and documentation. The safety doors are partially disassembled but included. If you are looking for high-quality machining capabilities, you should consider the MAHO MH 1000 C/A universal machining center we offer for sale. Contact us for further details. Tool interface: ISO 50 Quill stroke, vertical spindle: 100 mm Spindle speed range: 20–4000 rpm Spindle speed override: 80–120 % Bdsdpsy Hizqofx Alaeb Feed rate (X/Y/Z): 1–4000 mm/min Feed force X/Z: 8000 N Feed force Y: 24,000 N Rapid traverse: 10 m/min Feed and rapid traverse override: 0–140 % Table diameter: 1250 mm Table length: 800 mm Bore diameter: 42 H7 mm T-slots: 7 T-slot spacing: 100 mm Manual cross adjustment: 275 mm Table division ratio: 1:120 Table rotation per handwheel revolution: 3° Table rotation per division: 2° Positioning resolution: 0.001° Step size per division: 0.026 mm Table swivel (X-axis): ±30° Table swivel (Y-axis): ±30° Table rotation: 360° Table clamping pressure: 80 bar Max. table load: 800 kg Table weight: 1100 kg Voltage: 220/380 V Frequency: 50 Hz Total connected load: 36 kVA Total power consumption with coolant: 41 kVA Total power consumption with coolant and tool changer: 46 kVA Positioning resolution: 0.001 mm Operating hours: approx. 29,192 h Current condition: idle, not in operation Documentation: manuals available Safety doors: partially disassembled, included Delivered accessories: none Tool holders: not included Table axis: only one manual axis, not referenced, error present

Kondisi: hampir baru (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2D1-1116, tinggi total: 1.905 mm, lebar total: 1.626 mm, panjang total: 1.219 mm, berat keseluruhan: 725 kg, Dijual, seperti baru, sedikit digunakan, sangat presisi (±0,001 mm) mesin honing lubang otomatis lengkap dengan banyak instrumen presisi, perangkat ukur, dan banyak perlengkapan tambahan untuk honing lubang berdiameter D6 hingga D25 mm. Sudah terhubung ke jaringan listrik dan siap digunakan. Bedjy E N R Njpfx Alajdb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1969, Segera tersedia dari lokasi: Mesin honing vertikal hidrolik Nagel Tipe VS 8 – 50 / S Tahun pembuatan: 1969 Diameter honing: 10 – 120 mm Panjang honing: 10 – 750 mm Permukaan penjepitan meja: 920 x 350 mm Jarak lengan: 440 mm Pengumpanan otomatis Peralatan honing lengkap, kepala honing 10–120, batang honing, mangkuk penjepit Penggerak spindle: 4 HP Penggerak rotasi spindle: 3 HP Bdedpjy E I Rzsfx Alaob Berat: 5 ton Harga: EUR 4.500.- belum termasuk PPN, ex lokasi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 34.062 h, kecepatan spindel (maks.): 10.000 rpm, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 800 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, daya motor spindle: 44.000 W, jumlah sumbu: 5, This 5-axis DMG DMC80U DuoBlock was manufactured in 2011. It features a maximum workpiece diameter of 800 mm and a height of 600 mm, with a load capacity of 800 kg per pallet. The machine is equipped with a double pallet system and a rapid traverse speed of 60 m/min. If you are looking for high-quality machining capabilities, you should consider the DMC80U DuoBlock universal machining center from DMG, which we are offering for sale. Contact us for further details. • Spindle hours: 34,062 h (as per image timestamp) • Total machine hours: 79,252 h • Spindle: New spindle installed at the end of 2025 • Workpiece dimensions (max): Diameter 800 mm, Height 600 mm • Feed force (X/Y/Z): 10 kN • Rapid traverse: 60 m/min • Tool magazine: Chain type (60 or 120 positions, according to technical documentation) • Cooling units: machine cooling 3.3 kW; cabinet cooling 1.0 kW • Delivery: January 2027 Additional Equipment • Double pallet changer system • Internal coolant supply (ICS) with 980 l tank and belt filter • Hydraulic clamping Bodpfx Asy Egblelaedb • Infrared measuring probe Technical Specification Taper size SK 50

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 283, berat keseluruhan: 300 kg, lebar meja: 400 mm, panjang meja: 600 mm, kecepatan rotasi (min.): 250 rpm, kecepatan rotasi (maks.): 1.600 rpm, Tidak ada harga minimum – penjualan dijamin kepada penawar tertinggi! Penawaran mengikat untuk pengambilan tepat waktu antara 23.06.2026 dan 26.06.2026! DETAIL TEKNIS Rentang putaran: 250 - 1.600 rpm Ukuran permukaan penyimpanan: 600 x 400 mm DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 800 x 700 x 1.500 mm Berat mesin: 300 kg PERLENGKAPAN Jarum honing Collet penjepit Referensi eksternal: 12 Bedpfoy D T A Hex Alasdb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 20.030 h, kecepatan spindel (maks.): 8.000 rpm, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 900 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530 HSCI, daya motor spindle: 23.000 W, beban meja: 1.200 kg, jumlah slot dalam magazin alat: 60, jumlah sumbu: 5, This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It offers an impressive X-axis travel of 2,600 mm, Y-axis travel of 1,100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 - 8,000 rpm and a tool magazine with a capacity for 30 tools. If you are looking for a high-quality milling machine, you should consider the universal machining center DECKEL MAHO DMF 260/11. Contact us for further details. Bdsdpfey D Ilcjx Alaeb • Control interface: Heidenhain ERGOline, 19" display • Rapid traverse: 40 m/min; Acceleration: 4 m/s² • Main spindle: Vertical motor spindle power 23 / 5 / 13.5 kW (25 / 100% duty cycle) • Swivel head: B-axis, up to 18,000 rpm; spindle interface HSK-A63; power 35 / 25 kW (40 / 100% duty cycle) • Tool magazine: 30 tools; chain magazine with double gripper; chip-to-chip time 9 s • Tool magazine (optional): 60 tools SK40 / HSK-A63 • Table: 3,200 x 1,100 mm • Integrated rotary table: 1,050 mm diameter • Clamping: Hydraulic • Measuring system: Direct measuring systems • Machine design: Fully enclosed with coolant tank; 2 rotatable viewing windows • Air supply: Sealing air for linear measuring systems • Air through spindle: Selectable via M-function • Operating mode: Process monitoring in production • Language: German / English screen texts • Workpiece clamping release: Automatic operation release • Condition/maintenance history: • New spindle and new guideways, completely replaced by DMG (January 2026) • Geometry newly measured and set by DMG (January 2026) • New spindle with less than 100 operating hours Additional equipment • Chip conveyor: scraper belt type • Probing: Heidenhain TS 649 infrared probe • Tool measurement: Blum laser tool measuring system • Kinematic calibration: 3D quickSET • Machine protection: MPC machine protection control • Internal coolant supply: 40 bar / 600 l with paper band filter • Coolant/fume extraction: Oil and emulsion mist extraction system; extraction capacity 2 x 1,600 m³/h • Electronic handwheel • Coolant spray gun (included) Technical Specification Taper size SK 40

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin honing SZS 200X500D Bdjdpoy D A Nisfx Alajb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, kecepatan spindel (maks.): 15.000 rpm, tinggi total: 2.720 mm, lebar total: 2.630 mm, berat keseluruhan: 10.000 kg, lebar meja: 630 mm, panjang meja: 500 mm, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, panjang produk (maks.): 4.500 mm, beban meja: 600 kg, jumlah slot dalam magazin alat: 60, sudut putar sumbu B (maks.): 180 °, sudut putar poros C (maks.): 360 °, jumlah sumbu: 5, This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 stations, which enhances its versatility for various machining tasks. The Y-axis was replaced in 2023 to ensure improved performance. If you are looking for high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining center we have for sale. Contact us for further details. • Spindle taper: SK40 (replacement spindle, approx. max. 2,500 operating hours) • Y-axis replaced in 2023 • Kinematics measured and within specifications • Tool magazine: 60 positions Bodsy A Ip Eepfx Alaodb • 3D probe on the machine: Hexagon • Year of manufacture: 2004 Additional Equipment • Tools, chucks, vices (details to follow; see attached PDF and Excel) • The above text contains no information about robots/automation/chip conveyors/bar feeders. Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, de_to_hu_it_lt_lv_nb_nl_pl Bdodpfxsy Ax Tno Alaeb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 35.044 h, kecepatan spindel (maks.): 10.000 rpm, tinggi total: 3.000 mm, lebar total: 2.500 mm, berat keseluruhan: 11.000 kg, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 500 mm, daya motor spindle: 16.800 W, panjang produk (maks.): 2.500 mm, beban meja: 500 kg, berat alat: 8.000 g, jumlah slot dalam magazin alat: 82, jumlah sumbu: 3, This 5-axis universal machining centre, HERMLE C40U Dynamic, was manufactured in 2011. It features travel paths of 850 mm on the X-axis, 700 mm on the Y-axis, and 500 mm on the Z-axis. The machine offers a maximum spindle speed of 10,000 rpm and has a tool magazine with 38 positions plus an additional 43-tool extension. If you are looking for high-performance machining solutions, you should consider the HERMLE C40U Dynamic machine we have for sale. Please contact us for further details. • Utilisation: 70% • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm • Spindle: • Output at 40%: 1,500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1,500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tools/Magazines: • Number of magazines/turrets: 2 Bsdpfx Asy Al Ufolaodb • Magazine capacity: 38 positions • Additional magazine: +43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll cooling system • Renishaw OMP 40 probe • Through-spindle coolant (IKZ) • Laser beam monitoring • Chip conveyor • Taper size SK 40 • Operating voltage: 400 V/3~ • Mains frequency: 50 Hz • Control voltage: 24 V- • Total rated current: 60 A • Total power: 41 kVA Additional equipment • OPTIONAL at extra cost: Tool package available (approx. 530 tools) • OPTIONAL at extra cost: Zero-point clamping system The machine was serviced by HERMLE in 2025. In August 2025, the spindle head was replaced and the geometry was re-checked and adjusted by a HERMLE technician. Technical Specification Taper Size: SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, kecepatan spindel (maks.): 18.000 rpm, berat keseluruhan: 4.500 kg, jarak pergerakan sumbu X: 7.200 mm, jumlah sumbu: 4, This 4-axis SCHÜCO PBX AL was manufactured in 2008. It features a machining length of 7,200 mm and is designed for processing aluminium profiles, including dual-bar processing and pass-through capability for longer profiles. The machine is equipped with an automatic tool changer and clamping blocks to boost efficiency. If you are looking for high-quality machining capabilities, consider the SCHÜCO PBX AL universal machining centre we have for sale. Contact us for further details. • Axis configuration: 3-axis standard; optional 4th axis with A-axis upgrade • Machining length: 7,200 mm • Capabilities: • Processing of aluminium profiles (e.g. Royal S, Firestop II) • Dual-bar processing across the full length • Pass-through option for longer profiles • Electrical: 400 V, 50 Hz, rated current 23 A, power consumption 11 kW, main fuse 35 A Bdsdpfxoy Aaw Io Alaob • Pneumatics: 7 bar compressed air Additional equipment • Clamping blocks (3–4 pcs recommended for AL model) • Automatic tool changer (included; visible in the photos)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 10.200 h, kecepatan spindel (maks.): 24.000 rpm, tinggi total: 3.125 mm, lebar total: 22.000 mm, berat keseluruhan: 26.500 kg, jarak pergerakan sumbu X: 8.500 mm, jarak lintasan sumbu Y: 740 mm, jarak gerak sumbu Z: 1.120 mm, daya motor spindle: 12.000 W, panjang produk (maks.): 7.170 mm, jumlah sumbu: 5, This 5-axis SCHÜCO AS 100 was manufactured in 2022. It features a machine bed length of 9,000 mm and enables 6-sided machining with two 5-axis heads. The unit is equipped with 5 independently driven movable clamping blocks and a saw blade diameter of 450 mm. If you are looking for high-quality profile machining capabilities, you should consider the universal machining center SCHÜCO AS 100, which we offer for sale. Contact us for further details. • Machine bed length: 9,000 mm • Maximum profile length: 7,500 mm • Machining units: 2 x 5-axis heads • Machining sides: Possible 6-sided machining • Clamping units: 5 movable clamping blocks with independent drives • Saw blade diameter: 450 mm • Cutting angle: 90° (according to cutting diagram) • Control: AS 100 control module (rented via SchüCal) • Software: SchüCal integration Bsdpfx Aoy Aawzjlajdb Additional equipment • Combined loading and unloading magazine • Barcode scanner (included); optional portable barcode scanner

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 38.515 h, kecepatan spindel (maks.): 10.000 rpm, berat keseluruhan: 6.500 kg, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 426, jumlah sumbu: 5, en Bdedpfx Aeyz Tygjlaob

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, vertikale-honmaschine-wmw-veb-szs-200x1000-c Bodpeyy N Drofx Alaedb

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 5.000 kg, kecepatan spindel (maks.): 2.987 rpm, lebar total: 3.000 mm, panjang total: 36.000 mm, kebutuhan tinggi: 2.500 mm, persyaratan ruang panjang: 37.000 mm, lebar yang dibutuhkan: 3.000 mm, Kami menawarkan mesin hone Sunnen HTC 16000 bekas ini, tahun pembuatan 1999. Bdedpfxeyx Hazj Alajb Dapat juga disesuaikan untuk panjang 6m… Produsen: Sunnen HTC 16000 Model: HTC 16000 Tahun pembuatan: 1999 Kondisi: bekas ID Kategori: 222 ID Tipe: 2524 Jenis mesin: Mesin Hone • Stroke maks.: 12.000 mm • Panjang kerja pipa saat ini: 17.200 mm (dapat dibagi masing-masing 6m) • Kecepatan putar spindle tanpa beban: 2.987 rpm • Daya nominal: 5.500 Watt • Diameter dalam: dari Ø23,2 mm hingga Ø205,00 mm • Perlengkapan penjepit: prisma/rantai • Berat benda kerja maksimal yang dipakai internal ~5 ton Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirimkan pesan kepada kami atau hubungi kami.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 9.612 h, kecepatan spindel (maks.): 18.000 rpm, berat keseluruhan: 11.600 kg, lebar meja: 650 mm, panjang meja: 800 mm, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 560 mm, produsen pengendali: HEIDENHAIN, model controller: 640, jumlah sumbu: 5, This 5-axis DMG MORI DMU 75 Monoblock was manufactured in 2015. It features an impressive X-axis travel of 750 mm, a Y-axis travel of 650 mm, and a Z-axis travel of 560 mm. The machine is equipped with a maximum spindle speed of 18,000 rpm and offers 60 tool stations. If you are looking for high-quality machining capabilities, consider the DMG MORI DMU 75 Monoblock universal machining center we have for sale. Contact us for further details. • Power: 48 kVA • Rated apparent power: 35 kVA • Maximum input current: 70 A • Full load current: 80 A Bdjdpfx Asyx D Dkelaob • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V • Spindle speed: up to 18,000 rpm • Tool interface: HSK • Tool magazine capacity: 60 positions • B-axis: -5° to +110° • C-axis: 360° • Table size: 800 mm (L) x 650 mm (W) • Machine protection control (MPC) • Infinitely variable speed control • Operating mode 3 Additional equipment • Scraper belt chip conveyor • Internal coolant supply • 40 bar coolant system with 600 l tank and paper band filter • 40 bar IHK pressure relief valve • Coolant ring nozzle • Water jet pistol / cleaning gun • Air cooling system through spindle center • Mechanical oil and emulsion mist separator, 3 bar • Blum laser for tool radius and length measurement • Renishaw OMP 60 • Handwheel • Air conditioning package • Documentation/manual • Extraction button • Optional: Schunk zero-point system and tools

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, Mesin Gerinda Silang Presisi Sunnen Eclipse EC-3500 CGM-27 bekas Diameter honing – rentang kerja 1,5 – 165mm Panjang langkah – panjang honing 6 – 170 mm Kecepatan spindle 200 – 3.000 rpm Bdodpfx Alsyx Dv Hjaeb Jumlah langkah 60-500 langkah Total daya listrik – penggerak spindle 4,1 kw Motor langkah 1,1 kw Berat mesin sekitar 1.200kg Pengaman sensor cahaya SICK Mesin Honing Silang Horizontal / Mesin Honing Tipe EC 3500 lengkap dengan manual pengoperasian Inspeksi dengan daya dapat dilakukan dengan perjanjian sebelumnya. Harga atas permintaan Semua data teknis dapat mengalami kesalahan pengetikan/ketidakakuratan Penjualan hanya ke negara-negara Uni Eropa.

Kondisi: bekas, GEHRING Lifehone 600 ist eine CNC Vertikal-Honmaschine, entwickelt für hohe Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Durchmesser 3–90 mm, Bohrungslänge bis 600 mm; Hublänge 600 mm. Technische Daten: Spindeldrehzahl bis 4500 t/min; Vorschubgeschwindigkeit bis 60 m/min; Anschluss 3x 400 V 50 Hz; Maschinengewicht ca. 2500 kg; Abmessungen L2600×B2800×H3100 mm. Ausstattung: Kühlmitteleinrichtung und Papierfilteranlage. Erzielt enge Toleranzen; Einsatz in Automotive, Luftfahrt, Werkzeugbau, Medizintechnik und Uhrenindustrie. Bdjdpfx Ajyxnycelasb

Kondisi: hampir baru (bekas), 1 Bdjdpfoyvq Idjx Alaeb

Kondisi: bekas, Tahun pembuatan: 1961, translation_de_hu_it_lt_001 Bjdpfjyt R Hmjx Alaedb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, kecepatan spindel (maks.): 5.000 rpm, berat keseluruhan: 4.300 kg, jarak pergerakan sumbu X: 625 mm, jarak lintasan sumbu Y: 525 mm, jarak gerak sumbu Z: 455 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 840D, jumlah sumbu: 3, Auerbach FUW 625 3-sumbu ini diproduksi pada tahun 1997. Mesin ini memiliki perjalanan sebesar 625 mm pada sumbu X, 525 mm pada sumbu Y, dan 455 mm pada sumbu Z. Mesin dilengkapi dengan penukar alat otomatis 20 posisi dan beroperasi dengan kecepatan spindle 25 hingga 5.000 rpm. Jika Anda mencari solusi pemesinan berkualitas tinggi, pertimbangkan pusat pemesinan vertikal FUW 625 dari Auerbach yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Penukar alat: Majalah 20 posisi • Ukuran meja: 500 mm (lebar/diameter) • Sistem penggerak: Kepala gearbox 2 tahap (torsi tinggi) Bedpfxeytc Ezo Alajdb Spesifikasi Teknis Taper SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 29.532 h, kecepatan spindel (maks.): 10.000 rpm, berat keseluruhan: 27.750 kg, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 900 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, beban meja: 4.000 kg, jumlah sumbu: 5, en Bedoyr Sc Hopfx Alaodb

Kondisi: bekas, Tahun pembuatan: 1958, Hondurchmesser 40-420 mm Hub 15-6500 mm Spitzenhöhe 520 mm Werkstücklänge 6500 mm Werkstück-Durchmesser 1000 mm Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Bdedpfoyqvgyex Alaeb Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team