LATZKE Härteprüfung GmbH

Tahun pembuatan: 2023, Kondisi: hampir baru (bekas), Binder FP 400 Laboratory Drying Oven. Year of manufacture: 2023. Like new, unused. 2-year warranty on spare parts Binder FP 400 Material Testing Chamber The Binder FP 400 material testing chamber has been specially designed for demanding applications in biological, chemical, medical, and food industry laboratories. It features exceptionally precise temperature control and uniform temperature distribution throughout the interior. The device is thus an ideal basis for repeatable material and stability testing, cultivation, or developmental processes. Compared to similar test or climate chambers, it stands out for its high performance, energy efficiency, and user-friendly operation, significantly simplifying daily laboratory workflows. Technical features and advantages in daily laboratory use: The advanced FP 400 technology meets the highest standards of safety, energy efficiency, and ease of use. This material testing oven allows for precise control of temperature conditions across a broad range of testing and development processes—from microbiological cultures and chemical reaction studies to stability testing of sensitive samples. Key technical data at a glance: Gisdeyt A Enopfx Ah Rop - Temperature range: approx. 5 °C above ambient temperature up to max. 300 °C - Internal volume: 400 liters; maximum load: total 90 kg (up to 35 kg per shelf) - Temperature fluctuation over time: ±0.3 K; spatial temperature deviation: 1 K at 70 °C, 2.5 K at 150 °C, 4.8 K at 300 °C - External dimensions: 1235 x 1025 x 765 mm (W x H x D); internal dimensions: 1000 x 800 x 510 mm (W x H x D) - Power supply: 400 V, 3 N~, 3.4 kW, 50/60 Hz - Energy consumption: 520 W (70 °C), 1200 W (150 °C), 2340 W (300 °C) - Protection class: IP 20 according to EN 60529, certified according to DIN 12880 Additional features: - Interior made from high-quality stainless steel – ensures maximum durability and exceptionally easy cleaning - Digital temperature display and intuitive operation via ergonomic information panel - Practical door lock; quiet operation; low noise during use - Environmentally friendly and energy-efficient operation thanks to low power consumption and modern insulation design - Flexible interior configuration with optional shelves and drawers (up to 10 shelves can be installed) - Twin inner glass doors allow rapid visual inspection without affecting temperature levels - Optimized air circulation for optimal temperature uniformity - Easy to transport and install thanks to compact design and ergonomic handle The steam chamber boasts a large capacity of 498 liters, and the advanced air exchange system (16-18 exchanges per hour, depending on temperature) ensures rapid stabilization of conditions. Recovery time to preset parameters after briefly opening the door remains minimal, even at high temperatures—which is crucial for frequent use in routine operations. Compliance with internationally recognized standards DIN 12880 and EN 60529 (IP 20) guarantees safe and standards-compliant operation under everyday conditions. This makes the device ideally suited for quality control laboratories, industrial testing applications, and academic research projects where the highest precision is required.

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Gisdpfx Ahoytr Swo Rop

Kondisi: sangat baik (bekas), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 Gsdpfx Ahjytrzfs Reip 250°C 11.25 m³ 58 kW – Heating Cabinet The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH. This unit is ideal for industrial tempering, drying, and heat treatment processes. The large usable chamber allows for the simultaneous processing of large or multiple components. The oven is controlled via a JUMO IMAGO 500 controller, providing precise temperature control as well as automated programs. Typical applications: Industrial production Plastics and metal processing Component drying Heat treatment Testing / material analysis Laboratory and experimental uses This system is of robust industrial quality and suitable for continuous operation. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250 °C Temperature safety class: TB Class 1 TWB Class 2 Interior: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm Height: 2500 mm Depth: 2250 mm External dimensions: Width: 2900 mm Height: 3530 mm Depth: 2700 mm Load: Chamber load capacity: 400 kg Floor surface load: 1000 kg Weight Net weight: 1850 kg Electrical Data: Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated current: 90 A Rated power: 54 kW Connected load: 58 kW Additional Data: Minimum exhaust air flow: 600 m³/h Reduced exhaust air flow: 150 m³/h Purge time: 465 s Total steam chamber: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter shut-off temperature: 280 °C Adjustable temperature limiter: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data. All information is subject to change!) For further questions, please do not hesitate to contact us by telephone.

Kondisi: sangat baik (bekas), Weiss Model: WT11-340/40 Weiss Temperature Test Chamber, Air-Cooled Temperature range: -40°C to +180°C Temperature fluctuation over time at center of working space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (heating): 2.3 K/min Temperature change rate (cooling): 1.6 K/min Heat compensation: max. 1000 W Test chamber dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm Gijdpfx Ajytqnqoh Rjp External dimensions: Height: 1800 mm, Width: 895 mm, Depth: 1810 mm Test chamber volume: approx. 335 liters Rated voltage: 3/N/PE AC 400V ±10%, 50 Hz Rated power: 4.9 kW Rated current: 9.0 A Refrigerant: R404A Weight: approx. 490 kg For your peace of mind as a purchaser, please note the following: The following procedures are carried out on all chambers we offer: 1. Functional testing and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to technical changes and errors in specifications!) If you have any further questions, we will be happy to answer them by phone.

Kondisi: siap digunakan (bekas), 1 Godpfx Asytn Hksh Roip

Tahun pembuatan: 2001, Kondisi: bekas, en Gedpfxsyr R Uho Ah Rjip

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), 1 Gisdpfoyr Rwvsx Ah Rjp

Kondisi: sangat baik (bekas), en-GB_Binder_MKFT720E3.2_Environmental_Test_Chamber_Description Giodpfx Ahsyr Hi Uo Rsp

Tahun pembuatan: 2015, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Good day, We hereby offer you, without obligation, a used forced-air drying oven / drying cabinet from the manufacturer Binder, type FD 53. Manufacturer: BINDER GmbH, Germany Model: FD 53 Article number: 9010-0082 Year of manufacture: 2015 Temperature range: +5°C above ambient temperature up to 300°C Heating time to 70°C: approx. 7 min Heating time to 150°C: approx. 24 min Heating time to 300°C: approx. 60 min Spatial temperature fluctuation at 150°C: approx. 6.7 +/- K Internal volume: 53 L Internal dimensions: 400 x 400 x 340 mm (W x H x D) External dimensions: 640 x 660 x 630 mm Max. number of shelves: 5 pcs Usable area per shelf: 385 x 300 mm (W x D) Max. load per shelf: 15 kg Permissible total load: 40 kg Weight (empty): 44 kg Electrical supply: 230V, 50/60 Hz Current consumption: approx. 5.3 A Nominal power: 1.2 kW Energy consumption at 70°C: approx. 172 W Energy consumption at 150°C: approx. 429 W Energy consumption at 300°C: approx. 951 W Temperature control: Microprocessor PID controlled Safety class: 2 (DIN 12880) Controller function (timer): 0-99 hours Applications: The unit is suitable for precise temperature control of non-hazardous materials and for drying and thermal treatment of solid or powdered materials as well as bulk materials by means of heat supply. The device can also be used for drying, e.g., glassware, as well as for warm storage of liquids in containers. Note: The forced-air drying oven / drying cabinet is in good condition, fully functional, and can be tested in our workshop under power. Giodpfjypv Ihsx Ah Rjp Disclaimer: The technical data mentioned above has been taken from the user manual, manufacturer’s brochures, or other sources, for the accuracy and completeness of which we cannot assume any liability. Scope of delivery: 1 pc. forced-air drying oven / drying cabinet, manufacturer BINDER GmbH, type FD 53 We would be pleased if this machine is of interest to you. Your service team, Mertens & Frowein GmbH

Tahun pembuatan: 2018, jam operasional: 1.448 h, Kondisi: sangat baik (bekas), Inspeksi sinar-X canggih dengan keseimbangan sempurna antara sensitivitas deteksi berkinerja tinggi dan biaya operasional yang rendah. Deteksi sinar-X canggih yang menawarkan perpaduan optimal antara sensitivitas dan efisiensi biaya. Cocok untuk berbagai macam produk, sistem inspeksi sinar-X ini dapat diadaptasi untuk hampir semua aplikasi. -Pemrosesan gambar dengan Algoritma Genetika (GA) mengoptimalkan deteksi sesuai kebutuhan spesifik pelanggan -Sistem pendingin udara terintegrasi -Kontrol layar sentuh 17” yang ramah pengguna Data teknis terdapat pada brosur terlampir. Giodpfjynzaasx Ah Rsp

Kondisi: sangat baik (bekas), Binder Type: Binder ED 53 A high-quality BINDER ED 53 drying oven, made in Germany, is offered for sale. This unit is ideally suited for laboratory, workshop, research, electronics, materials testing, or hobby applications requiring constant temperatures. Features: - Precise digital temperature display - Robust industrial quality - Uniform heat distribution - Made in Germany - Ideal for professional applications What can the device do? The BINDER ED 53 is a precision drying oven with natural convection. It is used for: - Drying samples and materials - Heating components - Tempering materials - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably controlled. Thanks to its high-quality insulation and workmanship, the unit operates evenly and stably. Technical specifications: Model: BINDER ED 53 Temperature range: up to 300 °C Nominal power: 1.20 kW Connection: 230 V / 1N~ Current consumption: approx. 5.3 A Frequency: 50–60 Hz Protection class: IP20 Temperature protection: DIN 12880 Device class: 2.0 Internal volume: approx. 53 liters Dimensions (approx.): External dimensions: approx. 63 × 63 × 57 cm (W × H × D) Giedpoynh E Aofx Ah Rep Internal dimensions: approx. 40 × 40 × 33 cm Weight: approx. 40–45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Changes and errors in the technical data may occur. All information is subject to confirmation!) Further questions can be answered by phone.

Kondisi: siap digunakan (bekas), Binder KB-115 Inkubator Pendingin Oven Pemanas Dimensi luar: P 83,5 cm x L 68 cm x T 85 cm Dimensi dalam: P 60 cm x L 40 cm x T 46 cm Rentang suhu: -10°C – 100°C Tegangan nominal: 230V Silakan datang untuk melakukan inspeksi. Anda akan menerima faktur resmi. Giedpoynhp Uofx Ah Rsp Untuk pelanggan luar negeri juga dapat dibuatkan faktur netto, dengan syarat memiliki nomor identifikasi PPN yang valid. Penjualan sebelumnya tetap menjadi hak kami. Kunjungi toko kami dan lihat juga penawaran kami lainnya. Nama perusahaan dan merek dagang yang tercantum adalah milik masing-masing pemiliknya dan hanya digunakan untuk identifikasi serta deskripsi produk. Perbedaan pada data teknis serta kesalahan dalam deskripsi barang dapat terjadi dan tetap menjadi hak kami.

Tahun pembuatan: 2019, Kondisi: sangat baik (bekas), Memmert ICH 750 L eco chamber. Kamar langsung dari produsen, telah diuji sepenuhnya dan berfungsi dengan baik. Kamar iklim ICH 750L, 115 V, modul pencahayaan ICH Q1B opsi 2, intensitas cahaya 8000 lux, 4 lampu neon cahaya putih dingin – 2 lampu neon dengan lampu UV. Rentang suhu dari -10°C hingga +60°C tanpa kelembapan, dengan kelembapan 0–60°C, RH 10–80% – ICH750L. Gsdpoymy Utsfx Ah Rjip Perangkat lunak disertakan dalam flash drive.

Kondisi: sangat baik (bekas), en-Thermo Scientific Thermo Scientific Forced Convection Drying Oven UT 6200 F with External Temperature Control Unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced Convection Drying Oven UT 6200 F with External Temperature Control Unit Complete Laboratory Temperature Control and Drying System Giodpfxeymn Ego Ah Rep Description – Function & Application For sale is a professional temperature control and drying system consisting of: Thermo Scientific / Heraeus Forced Convection Drying Oven UT 6200 F Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced convection drying oven ensures uniform temperature distribution inside and is ideally suited for drying, heating, and conditioning samples, components, or materials. Heating is performed via the external water temperature control unit (external heater). This enables very stable, indirect, and gentle temperature control for the material — without localized overheating and with homogeneous heat distribution. Typical Areas of Application: Laboratory & Research Industry & Production Material Testing / Component Drying Targeted conditioning, heating, and drying at a constant temperature Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced Convection Drying Oven: Manufacturer: Thermo Scientific / Heraeus Type: UT 6200 F Technical Data: Max. temperature: 85 °C Operating voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 0.6 A Power: 0.14 kW Protection class: IP20 Dimensions & Weight (approx.) External dimensions: 895 × 816 × 715 mm Interior: 554 × 644 × 503 mm Volume: approx. 180 liters Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Type: STW 150/1-3-10-K5 Technical Data: Heat transfer medium: Water Connection: 400 V / 3~ / PE / 50 Hz Current consumption: 6.9 A Heating capacity: 9 kW Apparent power: 4.7 kVA Max. temperature: 150 °C Dimensions & Weight (approx.) Dimensions: 30 × 75 × 60 cm Weight: 55 kg Overall: Complete temperature control and drying system Can be operated together (external heating / external heater) Total weight: approx. 155 kg Important Notice: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and information!) We are happy to answer further questions for you over the phone.

Kondisi: sangat baik (bekas), Memmert Model: UFP 800 Standard Equipment - Electronic Fuzzy-assisted PID process controller with continuous performance adjustment and a time-saving self-diagnosis system for quick error detection (see chapter "Error Messages") - Language selection - Alphanumeric text display Gedpfxsymnv Ej Ah Reip - Internal log memory with 1024 kB for recording actual temperature, set temperature, air turbine, air flap, and fault states with time stamp - Device control and logging of actual values on MEMoryCard XL - Programmable sequence control for up to 40 ramp segments - Adjustable air turbine for forced convection units (adjustment in 10% increments) - Servo-driven adjustable air flap (adjustment in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn encoder for easy operation of the unit - Visual alarm indicator - Built-in buzzer for alarm in case of limit violation, as an acoustic signal at the end of a program, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic monitoring following the setpoint (ASF) - Mechanical temperature limiter (TB Safety Class 1) - Monitoring relay for shutting off heating in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire design for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent switching chamber and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and to read out the controller's internal log memory Technical Specifications: - Interior: stainless steel, highly stable and easy to maintain due to deep-drawn ribbing - Housing (outer body): textured stainless steel, rear panel made of hot-dip galvanized sheet steel - UFP 800 mobile and lockable on wheels - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N~ 400 V 50/60 Hz - Power consumption: approx. 4800 W, 7A - Condition: used - Scope of delivery: (see photo) (Changes and errors in technical data and information excepted!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Memmert Model: UFP 800 Standard Equipment - Electronic Fuzzy-assisted PID process controller with continuous performance adjustment and a time-saving self-diagnosis system for quick error detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal log memory with 1024 kB for recording actual temperature, set temperature, air turbine, air flap, and fault states with time stamp - Device control and logging of actual values on MEMoryCard XL - Programmable sequence control for up to 40 ramp segments - Adjustable air turbine for forced convection units (adjustment in 10% increments) - Servo-driven adjustable air flap (adjustment in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn encoder for easy operation of the unit - Visual alarm indicator - Built-in buzzer for alarm in case of limit violation, as an acoustic signal at the end of a program, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic monitoring following the setpoint (ASF) - Mechanical temperature limiter (TB Safety Class 1) - Monitoring relay for shutting off heating in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire design for control and monitoring - Convenient integrated 3-point temperature calibration Gisdpfxjymm Ere Ah Rjp - Temperature-dependent switching chamber and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and to read out the controller's internal log memory Technical Specifications: - Interior: stainless steel, highly stable and easy to maintain due to deep-drawn ribbing - Housing (outer body): textured stainless steel, rear panel made of hot-dip galvanized sheet steel - UFP 800 mobile and lockable on wheels - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N~ 400 V 50/60 Hz - Power consumption: approx. 4800 W, 7A - Condition: used - Scope of delivery: (see photo) (Changes and errors in technical data and information excepted!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Zwick/Roell Type: 500N zwicki Zwick/Roell Universal Testing Machine 500N Year of manufacture: 2016 | Xforce P / testXpert II For sale is a high-quality universal testing machine from Zwick/Roell, model 500N. This system is ideally suited for tensile, compression, and materials testing in the lower force range and is typically used in laboratories, quality assurance, research & development, as well as in the plastics and packaging industries. The machine is fitted with an Xforce P load cell (20 N) and is operated via the proven testXpert II software (version 3.71). The software enables professional data evaluation, including graph display and test reports. Areas of application: Giedpfxsymmg Ne Ah Rsp - Tensile tests on plastics, films, textiles - Compression tests - Tear and peel tests - Quality control and material development Technical specifications: - Maximum force: 500 N (0.5 kN) - Load cell: Xforce P, 20 N - Year of manufacture: 2016 - Mains connection: 100–240 V, 50/60 Hz - Made in Germany - Includes PC, monitor, and keyboard - Sturdy laboratory table with drawer unit Weight: - Testing machine (without table & PC): approx. 70 – 90 kg - With laboratory table: additional approx. 40 – 60 kg - Complete system with PC & monitor: total approx. 120 – 150 kg Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Tahun pembuatan: 2025, jam operasional: 50 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, SC 300 Caliris® Select adalah perangkat DSC yang komprehensif, andal, dan serbaguna untuk karakterisasi material, disesuaikan dengan aplikasi individual. Baik untuk penelitian & pengembangan, kontrol kualitas, pengujian kontrak, atau spesifikasi material untuk aplikasi tertentu, informasi mengenai perilaku material pada suhu yang bervariasi dan atmosfer yang berbeda sangat penting. DSC 300 Caliris® dapat membantu dalam: Giodoymd Iqjpfx Ah Rjp Identifikasi material Optimisasi proses Kontrol kualitas Diagram fasa Analisis kinetik Kompatibilitas

Kondisi: sangat baik (bekas), en-GB Gedpfjymdc Iex Ah Rsip

Kondisi: sangat baik (bekas), binder-fd53-en Gisdpjyma Nwefx Ah Rep

Kondisi: sangat baik (bekas), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 Offered for sale is a professional materials testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been properly maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Nominal Force: 10 kN Test Type: Tensile and Compression Testing Technical Specifications: Crosshead Speed: 0.001 – 1,000 mm/min Speed Accuracy: 0.01% of nominal speed Travel Resolution: 0.038 µm Positioning Repeatability: < 2.0 µm Max. Test Frequency: 0.5 Hz Measurement Acquisition Rate: 500 Hz Data Transfer Rate to PC: 10–100 Hz Force Measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working width: 440 mm Lower test area height: 1,050 mm Weight with typical fixtures: approx. 160 kg Gjdpfxoyl T U Dj Ah Rjip Electrical Data: Input voltage adjustable: 100–250 V Line frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Status: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Ambient temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation prior to measurement series: 120° testXpert control Documented service and calibration records available. Software & Control: Software: testXpert® II Documented Version: V3.2 Installation documentation from Version 2.2 Documentation as of: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components: DCSC measurement module Force transducer Xforce P / Xforce HP Incremental encoder (rotary travel measuring system) Force measurement in accordance with ISO 7500-1 Mounting under moving crosshead Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of Delivery: Materials testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation binder with records Scope of delivery as shown in the pictures. (Specifications and technical details subject to change and correction!)

Kondisi: sangat baik (bekas), en-binder-mkt-240-e3-chamber Giodsylxvyopfx Ah Rjp

Kondisi: sangat baik (bekas), en: CTS type CW-60/7 Walk-In Climate Test Chamber CTS Walk-In Climate Chamber 7m³ Temperature & Humidity Testing -60–120°C Description: For sale is a professional CTS climate test chamber, type CW-60/7. A professional walk-in climate and temperature testing chamber for industry, research, and quality assurance. This system simulates extreme environmental conditions to test components, modules, or complete systems under realistic stress scenarios. The climate test chamber enables: - Temperature testing from –60 °C to +120 °C - Climate testing with 10–95 % relative humidity - Programmable temperature and humidity cycles - Endurance tests - Trend recording - RS232 / RS485 interfaces - Manual or automatic program operation Especially suitable for: - Electronics testing - Solar modules (previous field of use) - Automotive components - Materials testing - Endurance tests The air circulation system ensures highly uniform temperature distribution throughout the entire 7 m³ test space. Technical Data: Temperature –60 °C to +120 °C Rate of change approx. 2 K/min Humidity 10–95 % rH Dew point range +5 °C to +89 °C Refrigerant R404A/R23 Max. permissible pressure: 25 bar III.6 Short User Guide Size Test volume: 7 m³ Walk-in design Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Power Supply / Connection 400 V, 3/N, 50 Hz Nominal power: 43.1 kW Rated current: 67.5 A Protection class: IP 54 Weight: 4,000 kg Condition: used Scope of delivery: (see photos) (Subject to technical modifications and errors. All data provided without guarantee!) Gijdpfx Aheylxaxe Rsp If you have further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), CTS Model: CTS CW+40/7/7 Walk-in Climate Test Chamber CTS Walk-in Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Gedpfoylmamjx Ah Rsip Description: For sale is a walk-in climate temperature test cell CTS CW+40/7/7 in industrial design. The system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles can be run. The high air circulation ensures an even distribution of climate conditions inside the test chamber. The walk-in design allows testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm External dimensions (entire system): Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (total) Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heater Interior: Stainless steel Exterior: Coated steel sheet (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Kondisi: siap digunakan (bekas), Kaca pintu tersedia Dimensi ruang dalam: Lebar 340 mm Tinggi 355 mm Kedalaman 360 mm Suhu nominal: 500° C Giodpfxjyk Et Nj Ah Rsp