EURODUST Olofsson

Kondisi: bekas, Tahun pembuatan: 1998, jenis arus masuk: tiga fasa, kapasitas hisap: 1.400 m³/jam, tekanan negatif: 3.000 Pa, jangkauan lengan: 4.000 mm, Unit penyedot asap las mobil dua posisi, hisap debu, filter self-cleaning pneumatik, vakum KEMPER. Untuk pengelasan, penggerindaan dan segala jenis debu kering. Itedpfoxn Nv Isx Adqjn Kartrid filter. Filter dibersihkan secara pneumatik dengan denyut udara bertekanan selama operasi, sehingga efisiensi alat tetap tinggi. Kipas dengan daya 1,5 kW. Kapasitas: 1400 m3/jam Vakum: 3000 Pa Lengan hisap panjang 4,00 m Nomor stok: 1048

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 615 kg, lebar total: 1.160 mm, panjang total: 1.690 mm, tinggi total: 2.270 mm, laju aliran volumetrik: 3.600 m³/jam, luas filter: 60 m², sambungan udara terkompresi: 5 batang, Perlengkapan: Pelat tipe tersedia, 3x Modul Nederman Filtermax dengan kapasitas besar + 1 kipas NCF Isdpfxjxlkv Do Adqotn Kapasitas total 10.000 m3 per jam.

Kondisi: sangat baik (bekas), Ekstraksi asap las Merek: Kemper Tipe: Vacu Fil 500 Tahun pembuatan: 2/2016 Aliran volume: 500 m3/jam Tegangan sambungan: 400 Volt 12,9 ampere 5,5 kW Aksesoris: kartrid filter cadangan belum terpakai Dimensi transportasi: Iedpfoxk Uxaex Adqetn Panjang: 1200 mm Lebar: 660 mm Tinggi: 1400 mm Berat: 250 kg

Kondisi: baik (bekas), Kemper Schweissabsauganlage Typ 80050 Itedsxk T A Repfx Adqjn

Kondisi: sangat baik (bekas), 1 Iodpfx Adoxk Trfoqotn

Kondisi: bekas, Tahun pembuatan: 2014, luas filter: 150 m², kapasitas hisap: 15.000 m³/jam, The WELDEX FT series of filtration towers has been specifically designed for the efficient removal of welding fumes in manufacturing facilities. These units are primarily intended for extraction of contaminated air during welding of large or complex metal components where source capture is impractical. Fine particulate matter is separated by M-class filter cartridges, which are cleaned automatically during operation by means of pulsed compressed air (pulse-jet cleaning). The WELDEX FT filtration tower is positioned in the center of the work area. Fume-laden ambient air is drawn in through the top of the unit from all around, purified, and then draught-free air is returned to the hall via two side outlets. A three-section collection drawer gathers separated contaminants from the pre-separator and filter chambers. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is not practical, such as: • Metal industry • Mechanical engineering • Automotive sector Itodpoxg Ickefx Adqjn • Vehicle construction • Aircraft manufacturing • Shipbuilding • and more High-performance welding fume extraction for production plants • No ductwork installation required • Easy installation – ready for immediate use • Durable, cleanable filter cartridges = low operating costs • Effective fume extraction utilizing thermal lift from welding processes • Compact design = minimal space requirement • Flexible application – installation site can be changed at any time Brand: ESTA Model: WELDEX FT-150 Specifications: – Motor power: 11 kW – Capacity: up to 15,000 m³/h – Vacuum: 2,000 Pa – Filter area: 150 m² – Weight: 1,400 kg – Year of manufacture: 2014 Dimensions: – Width: 2.10 m x 1.40 m – Height: 3.65 m Warehouse no.: 1031

Kondisi: bekas, Ekstraksi asap las, sistem filter, ekstraksi debu LINCOLN NORWELD Itedpfx Adexf Up Isqon Ekstraksi sentral, sistem ekstraksi, filter silo, filter cartridge, filter impuls, filter penghilang debu Tipe FU-80-A No. Seri: 001799 Tahun produksi: 1996 Aliran udara max. 6000 m³/jam (tergantung pada daya kipas) Luas filtrasi 80 m² (4 buah masing-masing 20 m²) Koneksi ekstraksi di inlet filter Ø 250 mm Koneksi buangan di outlet filter Ø 250 mm Koneksi udara tekan 4 bar - tanpa kipas, tanpa kontrol filter - Kategori filter C, efisiensi pemisahan 99,9% - pembersihan filter secara pneumatik - Inlet filter dengan penutup pneumatik - 4 buah cartridge filter bekas Ø 325 mm, panjang 1200 mm - Pintu servis 240 x 240 mm Kebutuhan ruang P x L x T 1400 x 1600 x 2970 mm Berat: sekitar 300 kg kondisi baik

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 800 kg, Plymovent Diluter – Hitsaushuurun Poistojärjestelmä Plymovent Diluter on itsenäinen ilmanpuhdistusjärjestelmä, joka on suunniteltu erityisesti hitsauspajoihin. Toisin kuin perinteiset kanavoidut ilmanvaihtoratkaisut, Diluter kierrättää ja puhdistaa ilman työtilan sisällä. Puhdistettu, suodatettu ilma puhalletaan horisontaalisesti ylhäältä, mikä luo tehokkaan ilmavirtauksen, joka jatkuvasti laimentaa ja poistaa hitsaushuurut hengitysvyöhykkeeltä. Tärkeimmät tekniset tiedot ja ominaisuudet: - Ilmavirran kapasiteetti: suunniteltu keskisuurille ja suurille hitsaustyöpajoille - Asennus: vapaasti seisova yksikkö – ei kanavointeja tai monimutkaisia ilmanvaihtojärjestelmiä - Suodatusjärjestelmä: korkean hyötysuhteen suodatinkasetit, säännöllinen vaihto - Käyttö: automaattinen puhallinohjaus ja tasainen horisontaalinen ilmanjako - Huolto: virallisen maahantuojan huoltama, suodattimet vaihdettu ajallaan - Rakenteeltaan: teollisuusluokan kestävä rakenne jatkuvaan käyttöön Itjdpfx Adoxf Iqrsqon Edut: - Ei kalliita kanavointeja tai ilmanvaihtoasennuksia - Takaa terveellisemmän ja puhtaamman työympäristön hitsaajille - Kompakti ja helposti integroitavissa olemassa oleviin työpajoihin - Plymoventin asiantuntijuuden takaama – hollantilainen valmistaja, joka on erikoistunut hitsaushuurun poistojärjestelmiin maailmanlaajuisesti Yksikkö on erinomaisessa kunnossa, täysin huollettu ja käyttövalmis. Suodattimet vaihdettu kuukausi sitten.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, DFPRO6-Cyclo 400-600 volt 7,5 kW 2007 Harga €5.000 Iodjxcgw Sepfx Adqstn DFPRO16-Cyclo 400-690 volt 18,5 kW 2008 Harga €7.000 3DFP9-SPRK 3x400 volt 11 kW 2018 Harga €12.000 2DFP6 3x400 volt 7,5 kW 2018 Harga €10.000 Dapat dilihat dalam keadaan terhubung karena kebangkrutan

Kondisi: baik (bekas), Kemper 82150101 Ekstraksi asap las Isdpfxsxbfuys Adqstn

Kondisi: bekas, Tahun pembuatan: 2022, Data teknis: Proses: 2 tahap Luas filter: sekitar 17 m² Efisiensi pemisahan: >99% Kelas pemisahan asap las: W3 Kapasitas ekstraksi: 1100 m³/jam Diameter lengan ekstraksi: 150 mm Panjang lengan ekstraksi: 3 m Koneksi listrik: 3 x 400 V Daya motor: 1,1 kW Tingkat tekanan suara: 70 dB(A) Dimensi, sekitar: 785 x 730 x 950 mm Itodpfx Asxbflredqsn Berat, sekitar: 106 kg Fitur: - Buatan Jerman - Untuk jumlah asap/debu rendah hingga sedang - Cocok untuk penggunaan sesekali hingga sering - Penggantian filter yang nyaman melalui pintu servis - Kanopi ekstraksi dapat diputar dan diayun 360 derajat Perlengkapan: - 3 filter utama pengganti baru (harga baru per buah sekitar 330 Euro) - 7 filter pra-pengganti baru - 2 kanopi ekstraksi (salah satunya belum pernah digunakan)

Kondisi: baru, Flow rate 1600 m3/h Separation efficiency 99.9 % Length extraction hose 3,000 mm Motor 230 Volt Motor output 1.1 kW Iedpfxexaal Re Adqetn Weight 80.0 kg Dimensions (L-W-H) 580 x 580 x 900 mm Description: The newly developed filter unit 'filtoo' by TEKA is a mobile filtration system suitable for a wide range of applications involving the extraction and filtration of fumes, dust, and gases. It is also suitable for use with high-alloy steels (stainless steel). (The unit is tested in accordance with DIN EN ISO 15012-1 (2005) and IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation rate: > 99.9%)). Where can the SIG 230 filtoo be used? - At welding workstations - In workshops - For soldering applications - By restorers - In metalworking shops Features: - BGIA-certified extraction and filtration system IFA 1005030 for extraction of fumes from high-alloy steels & non-ferrous metals - Operating manual in German Optional equipment at extra cost (recommended): - Retrofit kit STAVO (pre-separation of dust) - For FILTOO with spark protection and collection drawer Note: - The device is only intended for extracting dry dust and fumes - Please read the operating manual before initial commissioning

Kondisi: bekas, Tahun pembuatan: 1994, kapasitas hisap: 1.300 m³/jam, tekanan negatif: 4.800 Pa, Penghisap debu, penyedot asap las otomatis dengan filter pembersih diri, pneumatik, vakum merek KELLER. Cocok untuk plasma, laser, sandblasting, soda blasting, dan semua jenis debu kering. Kipas ditempatkan di belakang filter pada sisi udara bersih, sehingga risiko terjadinya ledakan diminimalkan. Filter dibersihkan secara pneumatik dengan tembakan udara bertekanan selama pengoperasian, menghasilkan efisiensi perangkat yang tinggi. Itjdjw I S Dvepfx Adqon Kipas dengan daya 3,3 kW. Diameter inlet: 250 mm Kapasitas: 1300 m³/jam Vakum: 4800 Pa Dimensi: Tinggi: 3,00 m Lebar: 1,45 m Kedalaman: 1,00 m Berat: 700 kg Nomor stok: 1028

Kondisi: baik (bekas), Tahun pembuatan: 2017, nomor mesin/kendaraan: 17002805, Penawaran 25284 Sistem filter ekstraksi / Unit penghilang debu stasioner Data teknis: Ijdpfx Ajw I Rztjdqetn - Aliran udara sekitar 4.500 m³/jam - Sistem filter kantong - Luas filter 17 m² - Daya penggerak 400 V / 4,0 kW - Kebutuhan ruang P 1900 x T 3650 x L 1300 mm - Berat sekitar 900 kg - Panel kontrol / unit pengoperasian terpisah - Peredam suara

Kondisi: bekas, Tahun pembuatan: 2003, luas filter: 143 m², kapasitas hisap: 6.000 m³/jam, Penghisap debu, ekstraktor asap pengelasan, filter patron pembersih mandiri, pneumatik, vakum untuk plasma, laser, sandblasting, soda blasting, peening dan segala jenis debu kering. Filter dibersihkan secara pneumatik dengan impuls udara bertekanan saat beroperasi, sehingga perangkat mempertahankan efisiensi tinggi. Kipas terletak di sisi bersih, sehingga risiko ledakan diminimalkan. Merek: Donaldson Torit DCE Model: DF+6-Cyclo Tahun produksi: 2003 Filter patron: 6 unit Luas filtrasi: 143 m² Daya kipas: 7,5 kW Kapasitas: 6000 m³/h Diameter inlet: 300mm/250mm Kami juga menyediakan filter patron baru sesuai pesanan yang disesuaikan dengan aplikasi alat. Iodpsw I Av Nefx Adqstn Dimensi: tinggi – 3,05 m lebar – 1,85 m x 2,35 m No. gudang: 0989

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 18133-00 12632868, tegangan masuk: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Iodpfx Adow Hw Dgjqetn

Kondisi: bekas, Tahun pembuatan: 2005, luas filter: 126 m², kapasitas hisap: 6.000 m³/jam, Dust extraction unit, welding fume extractor, filter ventilation, self-cleaning pneumatic dust collector, vacuum extraction system, suitable for plasma cutting, laser cutting, sandblasting, and all types of dry dust. Itjdsw Hrxfjpfx Adqen Donaldson Torit model: TDP 1350 Equipped with cartridge filter elements pneumatically cleaned by compressed air pulses during operation, ensuring high filtration efficiency. The fan is positioned after the filter on the clean air side, minimizing explosion risk. Year of manufacture – 2005 Fan power: 7.5 kW Airflow: 6,000 m³/h Filter surface area: 126 m² Inlet diameter: 315 mm Filter cartridges: Donaldson Ultra WEB, 6 units Stock number: 1026 Height: 3.80 m Width: 1.32 m Depth: 1.36 m Base: 1.25 m x 1.25 m

Kondisi: bekas, Tahun pembuatan: 2012, luas filter: 80 m², kapasitas hisap: 10.500 m³/jam, tekanan negatif: 3.800 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter by ULMATEC. Suitable for welding, grinding, sandblasting, and all types of dry dusts. Equipped with cartridge filter elements. Iodpew Hrnmsfx Adqotn The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the unit. Designed for continuous operation. Brand: ULMATEC Model: IRF 80-4-4/7.5 MD Year of manufacture: 2012 Fan power: 7.5 kW Max. capacity: 10,500 m3/h Max. vacuum: 3,800 Pa Filter surface area: 80 m2 Stock No.: 0950

Kondisi: bekas, Tahun pembuatan: 2008, luas filter: 72 m², kapasitas hisap: 5.000 m³/jam, Dust extraction unit, fume extractor, external filter, self-cleaning, from the renowned brand NEDERMAN. Iedpfx Ajw Dza Tsdqotn Industrial air filtration, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, as well as gypsum, cement, brick, plastics, and various types of dry dust. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Upon customer request, we can order new filter cartridges tailored to the intended application of the device. Model: FilterMax DFIL 40 Fan with soundproof enclosure, 5.5 kW motor. Capacity: 5,000 m³/h Filtration area: 72 m² Stock number: 1017

Kondisi: bekas, luas filter: 126 m², kapasitas hisap: 4.000 m³/jam, tekanan negatif: 3.100 Pa, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter for plasma, laser, sandblasting, and shot blasting applications. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high efficiency of the device. The fan is located on the clean air side, minimizing the risk of explosion. Iodpfxow Aw Azj Adqotn Brand: Lincoln/SULT Model: FLC 3-6 Motor power: 5.5 kW Capacity: 4000 m3/h Vacuum: 3100 Pa Cartridge filter elements – 6 pcs Filtration surface area: 126 m2 Inlet diameter: 320 mm Overall height – 3.20 m Width – 1.25 m Depth – 1.15 m Stock no.: 0637

Kondisi: bekas, Tahun pembuatan: 1990, Volume flow rate: 1200 m³/h Total power requirement: 0.75 kW Iodpswx R Rqjfx Adqstn Machine weight: approx. 115 kg Space requirements: approx. 0.65 x 0.70 x 2.00 m - Factory No.: 930918

Kondisi: baik (bekas), Tahun pembuatan: 2018, 1 used welding fume extraction unit Manufacturer: Kemper Model: System 8000 Year of manufacture: 2018 Technical Specifications Filter Filter stages: 1 Filter process: Self-cleaning filter Cleaning method: Rotating nozzle Filter area: approx. 10 m² Number of filter elements: 4 Total filter area: 40 m² Filter type: Filter cartridge Filter material: ePTFE membrane Separation efficiency: > 99.99 % Dust class: M Basic Data Extraction capacity: 3,500 m³/h Dimensions (W x D x H): 962 x 1,413 x 2,110 mm Weight: 590 kg Motor power: 3 kW Supply voltage: 3 x 400 V / 50 Hz Rated current: 6.5 A Sound pressure level: 65 dB(A) Pulse force F: 6 N Additional Information Fan type: Radial fan, belt-driven Compressed air supply: 5 - 6 bar Iedpswxpxyjfx Adqetn Air outlet: 355 mm Air inlet: 355 mm Dust collection bin volume: 34 L Technical data subject to change without notice

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 641, 110V mobiles Absauggerät Ijdpewxmhxsfx Adqstn

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 190600036, ProfiMaster is a high-quality extraction unit designed for occasional to frequent use during welding operations generating low to medium levels of welding fumes. The device’s disposable filters boast a large capacity and can be replaced with exceptional ease. Its rotatable and pivoting extraction hood delivers a 360-degree operating radius, minimizing repositioning during welding. - Hose version with 4 m extraction arm - Including automatic start-stop function Iodpfx Aowxccfodqotn The unit was purchased in 2019 and has not been used since spring 2023 due to changes in operational requirements.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1502000011, berat keseluruhan: 95 kg, laju aliran volumetrik: 1.100 m³/jam, daya: 1,1 kW (1,50 hp), DE-1 Itedeww Ugtspfx Adqjn