Przemyslowe Dostawy Inwestycyjne Cezary Kozlowski

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.150 mm, jarak lintasan sumbu Y: 1.850 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 24 m/menit, kecepatan spindel (maks.): 24.000 rpm, torsi: 87 Nm, CNC Fidia C20 WORKING ENVELOPE X-axis travel (longitudinal): 3,150 mm Y-axis travel (transversal): 1,850 mm Z-axis travel (vertical): 1,000 mm MAXIMUM AXIS SPEEDS X, Y axis feed rate: 30 m/min Z axis feed rate: 24 m/min WORKTABLE Clamping surface: 3,000 x 1,600 mm Maximum load capacity: 5,000 kg/m² T-slots: - 8 longitudinal H12 + 1 H8 - Width: 22 mm - Pitch: 160 mm ELECTROSPINDLE Maximum power (S6 60%): 55 kW Spindle speed range: 240 – 24,000 rpm Constant power range: 6,000 – 24,000 rpm Maximum torque: 87.5 Nm Tool holder: HSK-A63 C-axis travel: ± 200° C-axis speed: 2,000°/min C-axis offset relative to spindle axis: 75 mm A-axis travel: +95° / -110° A-axis speed: 2,000°/min Max. distance spindle nose - table surface: 1,175 mm Machine is equipped with: • 24-position tool magazine Lodoyw Tddspfx Afisri • Remote electronic handwheel • HMS system for head calibration • Various machine accessories • User and maintenance manual and CE conformity declaration

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 760 mm, kecepatan spindel (maks.): 10.000 rpm, berat keseluruhan: 26.000 kg, berat alat: 15.000 g, daya motor spindle: 30.000 W, produsen pengendali: FANUC, model controller: Series 18i-MB, jumlah sumbu: 4, This 4-axis EDEL Koordimatic XL 4020 portal milling machine was manufactured in 2003. It features a large working area of 4000 x 2000 mm and a maximum spindle speed of 10,000 rpm. The machine is equipped with a powerful 30 kW electrospindle and offers a Z-axis travel of 760 mm. If you are searching for a high-quality milling machine, consider the EDEL Koordimatic XL 4020 now available for sale. Contact us for further details. • Condition: Refurbished (used) • Functionality: Limited functionality • Power: 30 kW (40.79 HP); electrospindle fully overhauled (new bearings and clamping system) • Working area: 4000 x 2000 mm • Rapid traverse (X/Y/Z): 20 / 20 / 15 m/min • Rotational speed (max): 300 rpm • Tool magazine: 36 positions (damaged – no changer arm) • Distance from table to spindle center: 150 mm • Tool holder diameter: 50 mm Technical Specification Lrjdpfx Ajyw Nppefisi Taper Size: SK 50

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 7.230 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 850 mm, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 5, This 5-axis gantry milling machine, Handtmann PBZ NT 600 AS, was manufactured in 2000. It offers a maximum profile length of 6,500 mm and an impressive X-axis travel of approx. 7,230 mm. Designed for machining steel and aluminum, the machine provides advanced programming aids for milling and drilling cycles. If you are looking for a high-quality milling machine, the Handtmann PBZ NT 600 AS we offer for sale is worth considering. Contact us for more details. • Control system: BWO CNC 900 Multi-axis CNC • Control features: Tool radius compensation on 3 axes; RAM for programs/parameters; programming aids for milling/drilling cycles; contour programming (short programming); NC program I/O interface; interface for portable control panel (teach panel); operator panel with swivel console; TFT color display; 3.5" floppy drive; CD-ROM drive • Material suitability: steel and aluminum • Rotatable axes: C ≈ ±200°; A ≈ ±120° • Positioning accuracy (linear axes): ±0.05 mm/m Lredpfx Ajyw Ipuefiei • Speeds: Y machining/traverse max. 45 m/min; Z machining/traverse max. 45 m/min; X rapid traverse max. 90 m/min • Maximum profile length: 6,500 mm

Kondisi: baik (bekas), Tahun pembuatan: 1999, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.150 mm, Kontrol: Siemens 840 D Powerline Pemegang alat: HSK-A63 Kecepatan maksimum: 16.000 rpm Perjalanan X: 3000 mm Perjalanan Y: 2500 mm Perjalanan Z: 1150 mm Sumbu A: +/- 100 mm Lsdpfx Afjyw Ilioieri Sumbu C: +/- 181,5 mm Ukuran meja: 3000 mm x 2500 mm Opsi: Udara tiup luar Kinematika: Kepala garpu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 5.444 h, Pengontrol CNC: HURCO MAX5 Perjalanan sumbu X mm: 2.200 Perjalanan sumbu Y mm: 1.700 Perjalanan sumbu Z mm: 750 Lodpfx Afoyw H D Roieri Dimensi meja mm: 2.100x1.600 Berat benda kerja maksimum kg: 8.000 Kecepatan spindel rpm: 8.000 Pendinginan melalui pusat spindel bar: 20 Tipe holder alat: SK50 Siap untuk sumbu ke-4 Sistem pengukuran langsung XYZ

Kondisi: baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4480, panjang total: 14.500 mm, lebar total: 7.800 mm, tinggi total: 3.500 mm, berat keseluruhan: 20.000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Equipment: 5-Axis Unit with Cardanically Mounted Spindle: - Max. speed: 24,000 rpm - Nominal speed: 10,000 rpm - Power rating S1*: 15 kW - Max. power rating S6: 20 kW - Torque in S1*: 14.5 Nm - Torque in S6: 19 Nm - Rated voltage: 380 V - Rated current: 37 A Lrjdoywzq Sepfx Afioi - Rated frequency: 380 Hz - Speed infinitely programmable from 0 – 24,000 rpm in 1 rpm increments - Clockwise/counterclockwise rotation programmable - Drive via frequency converter - Maintenance-free - Water-cooled - Hybrid bearings - Automatic spindle stop during emergency stop - Spindle orientation for thread cutting - Tool holder: HSK-F63 hollow shank taper per DIN 69893-6 - Max. usable tool length from spindle nose: 240 mm - Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: - Max. speed: 24,000 rpm - Nominal speed: 10,000 rpm - Power rating S1*: 15 kW - Max. power rating S6: 20 kW - Torque in S1*: 14.5 Nm - Torque in S6: 19 Nm - Rated voltage: 380 V - Rated current: 37 A - Rated frequency: 380 Hz - Speed infinitely programmable from 0 – 24,000 rpm in 1 rpm increments - Clockwise/counterclockwise rotation programmable - Drive via frequency converter - Maintenance-free - Water-cooled - Hybrid bearings - Automatic spindle stop during emergency stop - Spindle orientation for thread cutting - Tool holder: HSK-F63 hollow shank taper per DIN 69893-6 - Max. usable tool length from spindle nose: 240 mm - Max. tool weight: 6 kg 8-Spindle Boring Unit (1 piece): - L-shape, Grotefeld - Drill spindles: individually selectable - Rotational direction: right/left - Spindle pitch: 32 mm - Power: 2.5 kW - Speed: 5000 rpm fixed - Z + 75 - Mount: D = 10 mm H7 - Stroke: 80 mm Groove/Cut Unit (5 pieces): - GROTEFELD Angle Saw Unit F100-S - Working/milling stroke operated pneumatically - Drive: Three-phase motor with poly-V belt - LEFT version - Drive rotation: RIGHT/LEFT - Speed reduction: 1:2.86 – belt drive - Power: 2.20 kW – 220-240/380-415 V – 50 Hz - Speed: n1 = 2,800 rpm / n2 = 8,011 rpm at 50 Hz - Spindle power: 2.2 kW - Feed: 150 mm - Tool holder: ø30 x 1.5mm – 5.0mm - Rotation direction of tool holder: opposite to drive rotation - Feed force: 2,565 N Underfloor Drilling Unit in the Machine Bed (1 piece): - GROTEFELD Angle Milling Head G06-1.1-P - Working/drilling stroke operated pneumatically - Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz - Drive rotation: right - Gear reduction: 1:1.55 gear drive - Drive speed: 2,800 – 5,600 rpm - Tool spindle speed: 4,340 – 8,680 rpm - Tool holder: 1x HI-Q/ERM25 DIN 6499-C (8°), for collet ER25 DIN 6499-B ø0.5-16mm max. - Rotation direction of tool holder: right - Flange clamping piece: FK45 - Feed slide: with pneumatic cylinder and dual steel guide rods - Feed: 80 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 68.648 h, jarak pergerakan sumbu X: 2.300 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 1.000 mm, panjang meja: 1.800 mm, lebar meja: 1.800 mm, kecepatan spindel (maks.): 10.000 rpm, berat keseluruhan: 36.000 kg, berat alat: 12.000 g, produsen pengendali: HEIDENHAIN, model controller: iTNC530, jumlah slot dalam magazin alat: 10, jumlah sumbu: 5, This Trimill VU 2313 vertical machining center was manufactured in 2010 in the Czech Republic and has 68,648 operating hours, of which 40,637 are spindle hours. It is equipped with a Heidenhain iTNC530 control and features 5 axes. The machine offers a spindle speed of 10,000 rpm, is in good condition, and has been well maintained. Advantages of the Machine Ledoywlv Eopfx Afijri Qualitative Advantages • Good condition! Technical Advantages • Spindle motor power/torque: 25 kW / 195 Nm • B-axis (head): -2°/+92° • C-axis (table): n x 360° • Working feed rates in X, Y, Z: 30,000 mm/min • Rapid traverse speeds in X, Y, Z: 3 m/sec² • Coolant through the spindle Machine Options: • Connection station for high-frequency grinding spindle IMT • HEIDENHAIN probe for workpiece positioning and measuring, infrared transmission • BLUM probe for tool measurement, laser (contactless) • Tool cooling with coolant through the spindle center and external nozzles • Lift Off – prevents Z-axis drop and part damage in the event of a power failure Technical Specification Taper size: HSK 100

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 4.486 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.360 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan rotasi (maks.): 18.000 rpm, model controller: Fidia C20 mit Bedienteil HPX, 1 Ledpfx Ajywgyrsfiori

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, panjang meja: 4.500 mm, lebar meja: 2.500 mm, kecepatan spindel (maks.): 22.000 rpm, CNC Heidenhain iTNC 640 WORKING RANGE X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORK TABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 t/m2 T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE HOLDER Automatic universal head indexed at 360,000 positions (every 0.001°). The rotation movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for undercuts up to 10°. Internal cooling system for bearings and axis motors. C-axis rotation range: +/- 270° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Available spindle power (S1/S6): 22/33 kW Available spindle torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool interface: HSK-A63 DIN 69893 HSK-A100 ELECTROSPINDLE WITH SEMI-AUTOMATIC CHANGE SYSTEM: Available spindle power (S1/S6): 37/43 kW Available spindle torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool interface: HSK-A100 DIN 69893 55-STATION CHAIN TOOL MAGAZINE, HSK-A100 / HSK-A63: Fixed floor-mounted chain magazine located at the rear of the machine, cased for operator protection, with vertical tool change arm and automatic tool preparation. “Fixed position” management. Hydraulic axis clamping Total tools: 55 Tool type: HSK-A63 DIN 69893 Lrsdpfx Asyv In Isfiei Number of tools: 30 Max tool diameter: 90 mm Max tool diameter with adjacent spaces empty: 160 mm Max tool length: 300 mm Max tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Number of tools: 25 Max tool diameter: 100 mm Max tool diameter with adjacent spaces empty: 160 mm Max tool length: 450 mm Max tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine is equipped with: - Heidenhain HR550 remote electronic handwheel - High-pressure coolant and air through the spindle - Semi-automatic change of electrospindle, with HSK-A63 and HSK-A100 interface - Various tooling included with the machine - Renishaw probe - BLUM laser presetter - AUTOCAL automatic head calibration system - Visormax subscription for remote monitoring - Electrical cabinet air conditioning - Cooling system for all axes and the electrospindle - User and maintenance manual and CE certificate of conformity

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 2259, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 1.900 mm, kecepatan rotasi (maks.): 24.000 rpm, model controller: Siemens 840D, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Perjalanan sumbu X: 6.000 mm Perjalanan sumbu Y: 3.500 mm Perjalanan sumbu Z: 1.900 mm Sumbu b: +/- 110° Sumbu c: 360° Putaran: 24.000 rpm Tipe spindle: HSK 63 Motor spindle: 25 kW Ukuran meja: 6.000 mm x 2.500 mm (pola lubang 22H7 / M16) Feedrate X + Y: 30.000 mm/menit Feedrate Z: 28.000 mm/menit Rapid traverse: 30.000 mm/menit DETAIL MESIN Kontrol: Siemens 840D Penukar alat: 40 alat PERLENGKAPAN Spindle: Fischer (Tipe MFWS 1709/30, 2 unit) Ljdpfx Asyv A Dkefijri Kepala milling: Forest Line (Tipe: kepala garpu, sumbu b dapat diayunkan +/- 110°, sumbu c berotasi 360°) Conveyor serpihan Richter (conveyor scraper) Pengukuran alat Blum Stasiun penyimpanan kepala milling (2 unit)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 23.291 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 1.400 mm, jarak gerak sumbu Z: 750 mm, panjang meja: 3.200 mm, lebar meja: 1.400 mm, DETAIL TEKNIS Ledpfxoyvub Us Afiori Perjalanan Sumbu X: 3.200 mm Perjalanan Sumbu Y: 1.400 mm Perjalanan Sumbu Z: 750 mm Ukuran meja: 3.200 x 1.400 mm DETAIL MESIN Jenis kontrol: CNC Kontrol: Heidenhain Jam Operasi Waktu operasi spindle: 23.291 jam Waktu operasi program: 27.807 jam Jam nyala kontrol: 83.301 jam Jam nyala mesin: 73.907 jam

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 2.700 mm, jarak gerak sumbu Z: 1.500 mm, laju pemakanan gandar Y: 50 m/menit, panjang meja: 6.000 mm, lebar total: 3.000 mm, kecepatan spindel (maks.): 22.000 rpm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 50 m/menit, hidung spindel: hsk 100, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 6,000 mm Y-axis cross travel: 2,700 mm Z-axis vertical travel: 1,500 mm Maximum feed rate with interpolating axes: 50 m/min WORK TABLE Dimensions: 6,000 x 3,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for fixture clamping: 28 mm, DIN 650 (H12), supplied with leveling bolts. T-slot direction parallel to Y-axis travel. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE INTERFACE Universal automatic head indexed to 360,000 positions (increments of 0.001°). Rotary motion is direct-drive motor controlled, with CNC position axis feedback. Automatic tool clamping. Allows 10° undercut. Internal cooling system for bearings and axis motors. C-axis rotation range: +/- 270° A-axis rotation range: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque of axes: 1,400 Nm Spindle motor power (S1/S6): 22/33 kW Spindle motor torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool interface: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle motor power (S1/S6): 37/43 kW Spindle motor torque (S1/S6): 140/165 Nm Maximum spindle speed: 12,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool interface: HSK – A100 DIN 69893 CHAIN TOOL MAGAZINE 55 POSITIONS, HSK – A100 / HSK – A63: Stationary chain magazine mounted at the rear of the machine, enclosed for operator protection, with tool change arm in vertical position and automatic presetting. Fixed-position management. Hydraulically actuated axis clamping Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 pcs Max. tool diameter: 90 mm Max. tool diameter (with adjacent pockets free): 160 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 pcs Max. tool diameter: 100 mm Max. tool diameter (with adjacent pockets free): 160 mm Max. tool length: 450 mm Max. tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum current required: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change system, with HSK – A63 and HSK – A100 interface • Various tooling included • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system Lodpfx Ajyvtt Nsfieri • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • Operating and maintenance manual and CE declaration of conformity

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: fungsi terbatas, CNC gantry milling center (Milling/Turning Center) | Manufacturer: DÖRRIES SCHARMANN | Model: 4FZT | Year of manufacture: 1996 A high-performance gantry milling machine designed for the machining of large workpieces. The primary areas of application are milling and turning of large, complex components. The machine can be inspected under power by appointment. Condition: According to its year of manufacture; partial overhaul is required in some areas. A very high-quality machine, therefore absolutely worthy / strongly recommended for modernization or complete overhaul. TECHNICAL DATA: Main dimensions: - Machine width: 13,230 mm - Machine height above floor: 8,450 mm - Machine length: 31,100 mm - Machining length: 11,000 mm - Clearance width: 4,400 mm - Clearance height from table surface to spindle nose of standard milling head: 3,000 mm Table: - Table width: 3,450 mm - Total table length: 13,400 mm - Single table length: 6,200 mm - Total clamping area: 3,450 x 11,000 mm - Clamping area per single table: 3,450 x 5,000 mm - Maximum permissible workpiece weight on total table: 112 t - Maximum permissible workpiece weight on single table: 80 t Crossbeam: Lsdpfx Afeyuptzsieri - Travel: 2,000 mm Milling and drilling slide: - Drive power for milling and drilling (spindle): 80 kW - Max. spindle speed: 2,500 rpm EQUIPMENT / ACCESSORIES: - 2 tables - 8 machining heads - CNC control: SINUMERIK 880 - 2 chip conveyors - Documentation - CE mark No guarantee regarding the completeness or accuracy of technical data and equipment details. – Subject to prior sale – A detailed technical data sheet and further equipment information are available on request.

Kondisi: baik (bekas), jarak pergerakan sumbu X: 12.000 mm, jarak lintasan sumbu Y: 7.300 mm, jarak gerak sumbu Z: 3.000 mm, panjang total: 30.000 mm, panjang meja: 12.000 mm, lebar meja: 4.730 mm, lebar total: 12.000 mm, tinggi total: 10.475 mm, beban meja: 250.000 kg, berat keseluruhan: 400.000 kg, Portal Milling Machine WALDRICH SIEGEN - PF-F-150 Make: Waldrich-Siegen Model: PF-F-150(1)-530/400 Travel (X-axis): 12,000 mm Travel (Y-axis): 7,300 mm Travel (Z-axis): 3,000 mm Travel (W-axis): 4,000 mm Distance between columns: 5,000 mm Table width: 4,730 mm Table length: 12,000 mm Table load capacity: 19 t/m – approx. 250 t total Table feed rate: 10,000 mm/min W-axis feed rate: 3,000 mm/min T-axis feed rate: 6,000 mm/min Transversely adjustable milling head Vertically adjustable crossbeam Horizontal hydrostatic ram Milling spindle Ø: 560 mm Tool holder: ISO 60 C-axis feed rate: 5,000 mm/min Milling motor: 90 kW Spindle speed: 2,500 rpm Z-axis travel: 3,000 mm Z-axis feed rate: 2,000 mm/min Küma angular head WF2 – 90 kW – 450 rpm Küma universal milling head UB1D – 60 kW – 2,400 rpm Küma fixed head GB1D – 90 kW – 2,400 rpm Küma angular head WF1 Power supply: 3 × 400 V / 50 Hz Power requirement: 600 kVA / 630 Amp Coolant system: 4,000 liters – Coolant through the spindle 20 / 40 bar Machine overhauled in 2004 by Schiess Bed – Table group: - Renewal of slideways - Regrinding of guideways - Renewal of table drive - Direct linear measuring system - Hydrostatic guideways Gantry and crossbeam: - Modification of adjustment spindle - Trapezoidal spindle replaced by ball screw - Direct linear measuring system - New drive motors to increase feed speed of milling axes - New milling ram with hydrostatic guides Electrical system: - Complete new control cabinet - Complete new wiring - Siemens Sinumerik 840D control – 6 axes Equipment: - Completely new Raumag-Janich protective covers - Completely new double chip conveyor - Large tooling package - Extensive clamping devices Machine under power in Europe Available immediately Lrjdpfx Aoytrxksfisi Controlled axes: X / Y / Z / W / C / B Overall height: 10,475 mm Overall width: 11,934 mm Overall length: 30,000 mm Total weight: approx. 400,000 kg Completely overhauled in 2004 for EUR 2,200,000! This CNC portal milling machine from Waldrich was used in the energy sector for machining steam turbine housings. Please note: The information on this page has been prepared by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend that you verify all important details.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, MILLING MACHINE BRIDGE FPT INDUSTRIE SPESIFIKASI TEKNIS Lsdpfoytpfnjx Afiori Merk: Fpt Industrie Model: Dinox 350 (IAT) Tahun: 2023 PickUp 2 posisi Kepala otomatis presisi tinggi (2 badan) Penukar alat CNC: Heidenhain HARGA DAN INFORMASI LEBIH LANJUT HUBUNGI KAMI (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, FRAIS, BUBUT, GERINDA, BOR, PRESS, LASER, GUNTING, BENDING)

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Kami menjual Datron M8 tahun 2011 kami, mesin dalam kondisi hidup dan siap langsung digunakan! Termasuk alat, pelat penjepit vakum, penjepit pneumatik, dan perangkat lunak pemrograman! Lrjdpfx Afoyti I Asiji Magasin alat 10 posisi (termasuk banyak alat dan dudukan) Spindel milling HSK25, 50.000 rpm Termasuk perangkat lunak pemrograman Primcam 2x penjepit pneumatik Pelat vakum dengan pompa vakum Perlengkapan penjepit horizontal Pendinginan dengan alkohol atau udara

Kondisi: baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Millstep CNC milling machine PA8070V3, year 2021 and PAX8050V2 – year 2015 – 6 units available in total CNC Gantry Milling Machine MillStep PA8070V3 – fully equipped For sale are three CNC gantry-type milling machines MillStep PA8070V3 (special size) in excellent condition. These machines are ideal for precision machining of aluminium, plastics, wood, and non-ferrous metals, as well as for prototyping and small batch production. Technical Specifications • Travel Range: X 800 mm / Y 680 mm / Z approx. 200–240 mm • Working Area: 800 × 625 mm • Repeatability: ±0.01 mm • Feed rate: up to 9 m/min • Linear guides: HIWIN profile rails • Ball screws on all axes Equipment • HF spindle 2.2 kW (up to 24,000 rpm) with ER25 collets • Hitachi frequency inverter WJ200 • 3-axis controller with cncGRAF Pro • Vacuum tables 800 × 500 mm and 600 × 500 mm • Vacuum pump 1.5 kW • Minimum quantity lubrication (MQL) • Tool length sensor • Robust steel base frame with chip drawers • Safety enclosure with protective doors Lodpfx Afeyrx Shjijri The machines are fully functional, well-maintained, and can be inspected and tested by appointment. Location: 09474 Crottendorf Price: EUR 5,900 net per unit (PA8070V3, year 2021) and EUR 3,900 net per unit (PAX8050V2 – year 2015) – 3 of each available – on-site inspection possible (machines still in operation) Shipping: Available by arrangement

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 29.081 h, Fungsionalitas: berfungsi sepenuhnya, FPT Industrie S.p.A. – Travelling Column/Portal Milling Machine Model: DINOSPIN Lsdpfx Aeyrndmofiori Year of Manufacture: 2019 Serial Number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine Weight: 44,280 kg Control System: Heidenhain TNC640 (15") RAM: 4 GB Hard Disk: 32 GB (min. 21 GB program storage) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block Processing Time: 0.5 ms Handwheel: Heidenhain HR510 (Remote handwheel) Universal Milling Head (5-axis machining, simultaneous movement of 2 axes) Max. Spindle Speed: 18,000 rpm Swivel Range C: ±270° Swivel Range A: ±185° Max. Rotation Speed A/C: 30 rpm Working Torque A/C: 450 Nm Axis Clamping Torque: 1,400 Nm Positioning Uncertainty: 8 arcsec / Scatter: 4 arcsec (VDI/DGQ 3441) Spindle Power (S1/S6): 22/33 kW Spindle Torque (S1/S6): 84/128 Nm Continuous Operation Constant Power: 2,500–18,000 rpm Continuous Operation Constant Torque: 10–2,500 rpm Tool Holder: HSK-A63 DIN 69893 Rigid Tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool Changer (overlapped-wheel, with changer arm) Magazine Capacity: 80 Max. Tool Ø: 75 mm Max. Tool Ø with free adjacent pocket: 125 mm Max. Tool Weight: 10 kg Max. Tool Length: 600 mm (for 40 tools) Max. Tool Length: 250 mm (for 40 tools) Tool Type: HSK-A63 DIN 69893 Measuring Systems Laser Tool Setter: Tool length/radius + tool breakage detection (software included) Probe for workpiece measurement/alignment: Wireless transmission, cycles included in CNC Monitoring Sensor for vibration/collision detection: Response time approx. 1 ms Coolant System external/internal (LEU/LEIUHP) Tank Volume: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External Cooling: max. 30 l/min, max. 10 bar ICS (Internal Coolant Supply): max. 30 l/min, max. 70 bar Additional Options/Features External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 7.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 2.000 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 18.000 rpm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 30 m/menit, torsi: 38 Nm, berat keseluruhan: 65.000 kg, First commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ±100° Lrjdpfx Afoyrdc Ejisi C-axis: ±360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with T-slots 18H12 / 250 mm 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, and Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power requirement: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided opening doors - 10-position tool changer Optional at extra cost: - Wireless measuring probe - Heidenhain remote diagnostics Condition of the machine Fully functional, in very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 68.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.200 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 1.200 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 15.000 rpm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 30 m/menit, torsi: 167 Nm, berat keseluruhan: 35.000 kg, en-01 Lrodpfxjyrc Ake Afioi

Kondisi: bekas, Tahun pembuatan: 1974, x-travel 9700 mm y-travel 3500 mm z-travel 640 mm w-axis 3000 mm Control Siemens type 840D PL Spindle diameter 200 mm Spindle power 85 kW Clamping surface 9000x2800 mm Table load capacity 40,000 kg Column clearance 3400 mm Rapid traverse spindle mount ISO 50 Machine weight approx. 193.8 t Space requirement approx. 22.4x10.2x8.2 m Retrofit 2009 Steep taper ISO 60 DIN 2079 Speed 12-450 rpm Milling heads: 1x WF 680/450 1x WFU 180/350 Lsdpfsyq Sxlox Afiori 1x WFU 70/300 1x Extension 550 mm for WFK's The technical data are manufacturer or operator provided and therefore non-binding for us. Intermediate sale reserved; exclusively our terms and conditions of business and sale apply. About us More than 400 own machines in stock over 15,000 m² storage area, crane capacity 70 t More than 10,000 accessory items for your workshop If you want to sell machines, production lines or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Kondisi: bekas, Tahun pembuatan: 1991, 1 Lredpfx Afsyq Swheioi

Kondisi: bekas, Tahun pembuatan: 2004, tc_data_machines Lodjyqv Eiepfx Afiori

Kondisi: bekas, Tahun pembuatan: 1994, x-axis travel 7000 mm y-axis travel 3500 mm z-axis travel 1000 mm Serial number 14908 Control Siemens Sinumerik 880 Clamping table 2 pieces Clamping table size 3000x2500 mm Spindle power 42 kW Max. speed 4000 rpm Tool changer with 128 stations Lredpfx Asyqvqlofisi Tool holder SK50 Clamping surface 6800x2500 mm Column clearance 3200 mm Table load capacity 20 t Universal angular milling head Straight head Long straight head Coupled clamping surface 6800x2500 mm Table load per table 10 t Coupled 20 t The technical data are provided by the manufacturer or operator, and are therefore not binding for us. Prior sale reserved; only our terms and conditions of business and sale apply. About us: More than 400 own machines in stock Over 15,000 m² storage area, crane capacity 70 t More than 10,000 accessory items for your workshop If you want to sell machines, production lines, or your business, please contact us. You can find more offers on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Kondisi: bekas, Tahun pembuatan: 1971, de_hu_it_lt_240603 Ljdpfxjyqvl Ae Afisri