ISTECH s.r.o.

Kondisi: hampir baru (bekas), Printer 3D BigRep ONE, printer 3D format besar dalam kondisi baik. Cocok untuk komponen besar dan prototipe. Termasuk aksesori, siap pakai. Pengambilan di lokasi diutamakan, inspeksi dapat dilakukan. Gedpeyi H Rmofx Abhein

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SG76G34001, Tahun pembuatan: 2017, jam operasional: 11.062 h, Trindo Digitalmanufaktur GmbH is selling a well-integrated production system from the HP Multi Jet Fusion series. The system is designed for industrial multi-shift operation and has been continuously maintained. System components: - 1x HP Jet Fusion 4200 Printer (M0E85A) - 1x HP Jet Fusion Processing Station (M0E89A) with Fast Cooling function - 3x HP Jet Fusion Build Units (M0E92A) for maximized throughput Service & Maintenance Status: Ongoing 3daas contract: The machine is currently covered by an active HP Service Agreement (3D-as-a-Service). Buyer’s Advantage: As the system has been continuously maintained by HP, the usual expensive and time-consuming re-certification by the manufacturer is not required upon handover or relocation. Gedpfxeyiz Nqj Abhsin Condition: Fully functional. All wear parts have been regularly replaced by certified technicians as part of the service contract. Production Capacity: With three build units included, the system is optimized for high-throughput operation. This enables simultaneous cycles of: - Printing process (Build Unit 1) - Cooling phase/unpacking in the Processing Station (Build Unit 2) - Cleaning and refilling/setup time (Build Unit 3) Handover Terms: Location: Munich (Trindo Digitalmanufaktur GmbH) Documentation: Maintenance logs and operating hours can be viewed upon legitimate request. Inspection: System inspection in ongoing operation is possible by appointment.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, tinggi total: 1.505 mm, lebar total: 955 mm, panjang produk (maks.): 1.565 mm, jumlah sumbu: 3, en Gsdpeyirxcjfx Abhein

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 7.500 h, el Gedpjyifirjfx Abhoin

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, Tahun pembuatan: 2020, panjang total: 900 mm, tinggi total: 1.900 mm, lebar total: 1.200 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 400 kg, tegangan masuk: 400 V, arus masuk: 13 A, suhu: 420 °C, suhu lingkungan (min.): 20 °C, suhu lingkungan (maks.): 40 °C, akurasi pemposisian: 0,02 mm, sekring listrik: 16 A, lebar meja: 500 mm, panjang meja: 400 mm, tingkat kebisingan: 62 dB, For sale is an EVO-Tech EL-102 – an industrial FFF/FDM 3D printer (filament-based) designed for reliable use in prototyping as well as single-part and small batch production. The system is engineered for consistent and reproducible printing conditions and is equipped with features such as integrated material drying and a heated build chamber to ensure process-stable results, especially when working with engineering thermoplastics. - Build volume: 500 × 400 × 510 mm - Build chamber (volume): 102 liters - Weight: 400 kg - Noise level: 62 dB - Positioning accuracy: 0.02 mm - Layer thickness: 0.10-0.75 mm - Nozzle diameter: 0.2 - 0.8 mm - Number of extruders: 2, independently controlled on one axis Godpfeyh Ratsx Abhein - Print bed temperature: 200°C - Chamber temperature: 100°C - Nozzle temperature: 420°C - Ventilation: extraction via activated carbon filter - Minimum wall thickness: 0.3 mm - Power consumption: 240–4500 W - Spool size: up to 10 kg - Vacuum clamping table - Integrated material drying for consistent material quality during the process The unit has been unused and stored in a warehouse for one year and is therefore being sold as untested.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: fe63b5ea, Tahun pembuatan: 2022, en-GB Gjdpfx Abeyh Hikjhein

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, tinggi total: 2.050 mm, berat keseluruhan: 4.500 kg, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 260 mm, jarak gerak sumbu Z: 100 mm, jumlah sumbu: 3, This 3s hybrid metal printer, the Lumex Avance 25 from Matsuura, was manufactured in 2019. It features a hybrid system that combines metal laser sintering and high-speed milling, supporting a maximum workpiece size of 250 × 250 mm and a table load capacity of 90 kg. The spindle speed ranges from 450 to 45,000 rpm and the machine is equipped with a tool magazine for 20 tools. Consider the opportunity to purchase this Matsuura Lumex Avance 25 metal 3D printer. Contact us for further details. • Operating hours: 2,000 h • Technology: Hybrid system (metal laser sintering + high-speed milling on a single platform) • Laser type: Yb fiber laser • Laser power: up to 400 W • Layer thickness: 0.05 mm • Build/machining area: • Maximum workpiece size: 250 × 250 mm Giodpfxoyhcxkj Abhen • Table size: 270 × 270 mm • Axes/travel distances: • U axis (sintering table): 185 mm • W axis (powder wiper): 522 mm • Spindle (milling): • Tool holder: BT20 (special Matsuura taper) • Tool magazine: 20 tools • Accuracy: • Positioning accuracy (X/Y/Z): ±0.0025 mm • Repeatability (X/Y/Z): ±0.001 mm • Typical materials: Tool steels, maraging steel, stainless steels (e.g. 316L, 630); titanium alloys (Ti-6Al-4V, Ti-6Al-7Nb) • Machine data: • Power supply: AC 200/220 V, 50/60 Hz • Installed power: approx. 39 kVA • Inert gas: nitrogen / argon

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Serial No.: 570547, Tahun pembuatan: 2019, jam operasional: 3.772 h, panjang total: 1.400 mm, tinggi total: 1.260 mm, lebar total: 1.100 mm, berat keseluruhan: 430 kg, konsumsi energi: 1.500 kWh, Objekt Stratasys Model: Objet500 Connex 3 + Washout Unit UW80-US + WATER JET Cleaning Cabin (Krummtec RK 30 VA/ST) Technical Specifications: Build volume: 490 × 390 × 200 mm Layer thickness: 0.016 / 0.030 mm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Dimensions and weight: 1400 × 1260 × 1100 mm; 430 kg Materials loaded and primarily used: - Digital ABS Component 1 RGD515 Plus (2380g out of 3600g) - Digital ABS Component 2 RGD531 (3140g out of 3600g) - VeroBlackPlus (2260g out of 3600g) - SUP705B Support Material (1980g out of 3600g & 2 full cartridges à 3600g available) - SHR printhead system with 8 printheads - Material cabinet for storing up to 8 x 3.6 kg; 2 x support material 2 x model material 1, 2 x model material 2, 2 x model material 3 - Simultaneous processing, combining, and mixing of up to 3 different model materials - 23 different polymeric model materials: VeroWhitePlus, VeroPureWhite, VeroBlackPlus, VeroGray, VeroBlue, VeroCyan, VeroYellow, VeroMagenta, VeroClear, VeroMagentaV, VeroYellowV, RGD720, RGD525, Agilus30, Agilus30 Black, TangoBlackPlus, TangoPlus, TangoGray, TangoBlack, Durus, Rigur, MED610 as well as Digital ABS Plus / Digital ABS2 Plus - 2 different support materials: SUP705 (gel-like) and SUP706B (soluble) - Processes rigid and opaque, transparent, rubber-like, polypropylene-simulating, ABS-simulating, heat-resistant, and biocompatible materials - Generates approximately 1,180 different dual and triple digital composite materials - 14 solid and 6 rubber-like color palettes - Multi-component models in one print (hard/soft) - Simulation of overmolding with Shore A 27-95 - Shore A hardness grades: 27, 30, 35, 40, 50, 60, 70, 75, 85, 95 Last inspection in 2023 under the maintenance contract, which has not been extended since 2024! Extensive accessories included: - WATER JET Cleaning Cabin, size L (Krummtec RK 30 VA/ST), Workspace: 680 x 350 x 598 mm - Washout unit UW80-US, max. workspace: 430 x 430 x 430 mm - Material: Digital ABS Component 1 RGD515 Plus (2380g out of 3600g) Giodpfx Aboyf Hdlshon Digital ABS Component 2 RGD531 (3140g out of 3600g) VeroBlackPlus (2260g out of 3600g) SUP705B Support Material (1980g out of 3600g & 2 full cartridges à 3600g available) - Numerous accessories and spare parts such as rotary knives, hoses, squeegees, integrated trash bins, ... (Subject to modifications and errors in the technical data and information!) For further questions, we are happy to assist you by phone.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3009F484403, Tahun pembuatan: 2022, jam operasional: 217 h, Kami menawarkan printer 3D Systems ProJet2500 ini, tahun pembuatan 05/2022, untuk dijual. Giodpfjyfv Dbox Abhjn Printer ini hampir seperti baru dengan 217 jam pencetakan (8 kg material). Jika ada pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, jam operasional: 556 h, panjang total: 483 mm, tinggi total: 914 mm, lebar total: 584 mm, jenis arus masuk: Arus searah (DC), berat keseluruhan: 48 kg, masa garansi: 16 bulan, panjang pemakanan sumbu X: 330 mm, panjang umpan sumbu Y: 270 mm, panjang umpan sumbu Z: 200 mm, en Giedpfx Ajydmnbsbhon

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, jam operasional: 3.300 h, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Lelang satu lini produksi manufaktur aditif lengkap dengan beberapa printer logam, unit sintering & mesin pencuci, serta printer komposit tambahan! Penawaran terdiri dari komponen-komponen berikut: 3 unit Metal X 1 unit Sinter II 1 unit mesin pencuci LMI 1 unit printer plastik Mark Two 1 unit printer plastik OnyxOne RINCIAN MESIN Jam operasional: 3.300 jam PERLENGKAPAN Dirawat dan diservis secara berkala Pengoperasian intuitif melalui layar sentuh Perangkat lunak untuk persiapan dan penyelesaian pencetakan Proses berbagai jenis logam Solusi lengkap dari desain hingga produk jadi Mudah diintegrasikan ke dalam lingkungan existing Gijdpfx Aeyc Ub Tsbhjn

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, jenis arus masuk: AC (pendingin udara), tegangan masuk: 240 V, arus masuk: 12 A, frekuensi input: 60 Hz, Kami menawarkan printer 3D Systems Projet MJP 2500 Plus yang sangat terawat ini, tahun pembuatan 2022. Nomor seri: 3009F509004 Negara asal: Amerika Serikat Tanggal pembuatan: 12/2022 Tegangan: 100-240 VAC Frekuensi: 50/60 Hz Fasa: 1 PH Arus: 12-9,5 A Gedpfsyb R E Ssx Abhoin Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 33234, Tahun pembuatan: 2013, Stratasys Objet 260 Connex – Printer 3D Profesional Dijual printer 3D Stratasys Objet 260 Connex, tahun produksi 2013. Mesin ini berasal dari lingkungan profesional dan cocok untuk aplikasi seperti pembuatan prototipe dan pengembangan produk. Gsdpfx Aboyag Imjhoin Aksesori opsional dapat dinegosiasikan. Informasi lebih lanjut tersedia atas permintaan.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4a99688d-3381-4979-8e5b-43, Tahun pembuatan: 2022, jam operasional: 164 h, berat kosong: 530 kg, tinggi konstruksi: 525 mm, lebar konstruksi: 400 mm, Perlengkapan: Penandaan CE, The submission of a bid obligates the buyer to collect the item by 28.02.2026! Hardly used demonstration machine! TECHNICAL DETAILS Gsdpfx Asx Ttifobhjin Build Volume (Single Nozzle): 525 × 400 × 400 mm Build Volume (Multiple Nozzles): 500 × 400 × 400 mm Build Chamber Volume: 84 l Layer Height: min. 50 µm, max. 250 µm Accuracy: ±125 µm or ±0.0015 mm per mm Process: Fused Filament Fabrication, Continuous Fiber Reinforcement MACHINE DETAILS Temperature Control: up to 200°C Extrusion System: Direct-drive printhead with two nozzles Materials Plastics: Vega™, ULTEM™ 9085 Filament, Onyx®, Onyx FR Continuous Fibers: Carbon Fiber, Fiberglass, Aramid Fiber (Kevlar®), High Temperature Carbon Fiber, Carbon Fiber FR Dimensions & Weight Machine Dimensions: 1,325 × 900 × 1,925 mm Weight: 530 kg Printhead Weight: 3 kg Operating Hours: 164 h EQUIPMENT Eiger software Direct-drive printhead with three nozzles Compatible with various plastic and fiber materials Ethernet port IEC/UL/CSA 62368-1 certification CE marking EU Machinery Directive compliance

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 5.845 h, KEYENCE Agilista-3200W ini diproduksi pada tahun 2016. Termasuk perangkat lunak Modeling Studio, perlengkapan instalasi printer, penutup samping, dan kabel daya AC. Cocok bagi Anda yang ingin meningkatkan kemampuan pencetakan 3D. Hubungi kami untuk informasi lebih lanjut. Gjdpfx Abex Stldshsin Jenis Aplikasi: Percetakan 3D

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, jam operasional: 2.974 h, panjang total: 730 mm, tinggi total: 1.350 mm, lebar total: 480 mm, berat keseluruhan: 85 kg, tegangan masuk: 240 V, arus masuk: 2 A, frekuensi input: 50 Hz, persyaratan ruang panjang: 730 mm, kebutuhan tinggi: 1.350 mm, lebar yang dibutuhkan: 480 mm, Envisiontec Perfatory III MiniMultilens dengan dua lensa yang dapat diganti terkenal akan presisinya, permukaan yang halus, dan detail yang tajam saat digunakan dengan berbagai sistem resin. Mesin ini benar-benar profesional untuk kebutuhan kualitas paling tinggi. Lensa yang dapat diganti menghasilkan volume cetak sebagai berikut: Giedpjx Rb Iwefx Abhsn - f60: 84x63x230 mm dengan resolusi XY asli 60µm dan ERM 30µm - f85: 44x33x230 mm dengan resolusi XY asli 32µm dan ERM 16µm Resolusi Z: 20-150µm tergantung pada material/resin Rentang cahaya: UV (

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 24.257 h, STEINER Projet MJP 2500 Plus ini diproduksi pada tahun 2018. Ini adalah printer 3D plastik yang dirancang untuk pembuatan objek dengan detail dan presisi tinggi. Ideal untuk prototipe dan produksi skala kecil, mesin ini menawarkan peluang signifikan bagi mereka yang ingin meningkatkan kapabilitas pencetakan 3D mereka. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pencetakan 3D Gijdpfx Aex Nr Thsbhen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 35.000 h, jumlah sumbu: 3, This 3-axis CONCEPT LASER M3 Linear was manufactured in 2011. It features a robust power supply with a total consumption of 7.4 kW, supporting the laser system, IT systems, and control voltage components. The machine is indispensable for operations requiring compressed air and nitrogen, as it ensures consistent flow and pressure. Ideal for high-precision 3D metal printing. Contact us for more information about this machine. Machine Advantages Gedjx Nh Rcjpfx Abhsin Technical Machine Features • Machine connection: CEE plug, 400V 32A 6h, 3-meter cable • Compressed air: pressure: 7–8 bar, oil-free • Flow rate: 130 l/min • Machine connection: quick-release coupling NW 7.2, 3-meter braided hose • Nitrogen N2: pressure: 5 bar, purity: >2.5 • Flow rate: 100 l/min • Machine connection: hose nozzle with sealing cone - 60° cone, 3-meter braided hose Additional Information Power Supply: Supply voltage: 3P/N/PE AC 400V, ±10%, 50Hz–60Hz Circuit protection: 32A Power Consumption: Laser system: Max. 3.4kW IT: 0.5kW Control voltage: 0.5kW NC (incl. axes): 1.0kW Extraction unit: 1.2kW Air conditioning unit: 0.8kW Total: 7.4kW

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 525389e4-9874-4408-810c-82126df2811f, Tahun pembuatan: 2020, jam operasional: 7.508 h, berat keseluruhan: 75 kg, tinggi dalam: 180 mm, panjang dalam: 300 mm, lebar dalam: 220 mm, Perlengkapan: Penandaan CE, Barely used showroom complete system consisting of the following components: Markforged Metal X 3D Printer Markforged Wash 1 Debinding Unit Markforged Sinter 2 Industrial Sintering Furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Gijdpfxox I Rfgs Abhen Build Volume: 300 x 220 x 180 mm Printing Process: Atomic Diffusion Additive Manufacturing (ADAM) Build Chamber: Heated Build Plate: Heated, vacuum-sealed, with automatic leveling Print System: Dual nozzles – for metal material and release material Print Materials: Stainless steel 17-4 PH, 316L, Tool steel H13, A2, D2, Inconel 625, Copper, Titanium-6Al-4V Media Supply: Filament feed, bound powder material Part Properties Maximum Part Size: 250 x 183 x 150 mm Layer Thickness: 50 micron and 125 micron MACHINE DETAILS Dimensions & Weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer Power Supply: 100–240 V / 50–60 Hz / 12.6 A Certificates: CE, FCC, UL, RCM, UKCA Safety Features: Two-factor authentication, organization admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobility casters Isolation transformer

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 525389e4-9874-4408-810c-82126df2811f, Tahun pembuatan: 2020, jam operasional: 7.508 h, berat keseluruhan: 75 kg, tinggi dalam: 180 mm, panjang dalam: 300 mm, lebar dalam: 220 mm, Perlengkapan: Penandaan CE, Barely used showroom complete system consisting of the following components: Markforged Metal X 3D Printer Markforged Wash 1 Debinding Unit Markforged Sinter 2 Industrial Sintering Furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build Volume: 300 x 220 x 180 mm Printing Process: Atomic Diffusion Additive Manufacturing (ADAM) Build Chamber: Heated Build Plate: Heated, vacuum-sealed, with automatic leveling Print System: Dual nozzles – for metal material and release material Print Materials: Stainless steel 17-4 PH, 316L, Tool steel H13, A2, D2, Inconel 625, Copper, Titanium-6Al-4V Media Supply: Filament feed, bound powder material Part Properties Maximum Part Size: 250 x 183 x 150 mm Layer Thickness: 50 micron and 125 micron MACHINE DETAILS Dimensions & Weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer Power Supply: 100–240 V / 50–60 Hz / 12.6 A Gsdsx I Rfajpfx Abhein Certificates: CE, FCC, UL, RCM, UKCA Safety Features: Two-factor authentication, organization admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobility casters Isolation transformer

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: K00219, berat keseluruhan: 601 kg, tinggi konstruksi: 406 mm, lebar konstruksi: 355 mm, 1 Gijdpfxsx Hwgnj Abhjn

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D362931, Tahun pembuatan: 2023, panjang total: 500 mm, tinggi total: 400 mm, lebar total: 510 mm, berat keseluruhan: 80 kg, tegangan masuk: 220 V, daya: 0,3 kW (0,41 hp), L'unità di polimerizzazione UV DWS UV Curing Unit XL è un dispositivo professionale di grande formato, consigliato per stampanti 3D SLA dal produttore italiano DWS. La macchina di polimerizzazione XL è dotata di una potente sorgente luminosa UV che garantisce prestazioni affidabili sia in termini di distribuzione uniforme del calore che della luce. Grazie all’elevata precisione e intensità, gli oggetti stampati possono essere polimerizzati in pochi minuti con automazione completa del processo. Oltre al modello XL, la gamma DWS comprende anche le unità di polimerizzazione S2 e M, che si differenziano per dimensioni e volume di polimerizzazione. La DWS UV Curing Unit XL offre un volume di polimerizzazione impressionante, studiato appositamente per i piatti delle stampanti della serie DWS XPRO. È dotata di un timer che consente all’utente di impostare con precisione il tempo di polimerizzazione (fino a 180 min). Allo stesso tempo la macchina garantisce semplicità d’uso, comandi intuitivi e design ergonomico. Sono, inoltre, disponibili funzioni di sicurezza avanzate, come il sistema intelligente di blocco porta e la ventilazione forzata interna per il comfort e la sicurezza dell’operatore. La DWS UV Curing Unit XL è progettata per applicazioni professionali di stampa 3D SLA quale fase finale del processo produttivo. Come dispositivo di supporto, effettua la post-polimerizzazione dei modelli realizzati con stampanti SLA DWS. Anche se perfettamente formati, i modelli stampati richiedono una ulteriore esposizione a una specifica fonte UV per completare la polimerizzazione e stabilizzare la struttura. Con la post-polimerizzazione, il modello non solo acquisisce una finitura liscia e precisa, ma, cosa ancora più importante, diventa estremamente resistente e durevole. Volume di polimerizzazione La DWS UV Curing Unit XL garantisce un ampio volume di polimerizzazione di 500 x 400 x 510 mm (19,7 x 15,7 x 20 pollici), sufficiente ad ospitare l’intero piatto delle stampanti DWS XPRO S, XPRO SL, XPRO Q e XPRO QL, comprese le relative versioni HR. Comandi La DWS UV Curing Unit XL dispone di comandi semplici e pratici che garantiscono un’esperienza di utilizzo intuitiva. L’avvio è possibile tramite il classico pulsante on/off. L’unità è dotata inoltre di un display OLED integrato da 2,4" che permette di regolare il tempo di polimerizzazione fino a 180 minuti, più che sufficiente anche per grandi lotti di parti stampate in SLA. Design e aspetto La DWS UV Curing Unit XL presenta una carrozzeria bianca e due sportelli con finestre trasparenti rosa. Il design solido ed ergonomico la rende ideale per molteplici applicazioni professionali, come prototipazione, produzione di parti finite, gioielleria, odontoiatria digitale, automotive, aerospaziale e altro ancora. Le dimensioni esterne sono di 761 x 705 x 806,5 mm (30 x 27,8 x 31,8 pollici). Il peso è di circa 78 kg (172 libbre). Prezzo Gijdpex Ehg Hsfx Abhon Il prezzo della DWS UV Curing Unit XL è di 21.490,00 USD, giustificato dall’ampio volume di polimerizzazione, dalle funzionalità avanzate e dall’efficienza. Specifiche tecniche: Volume di polimerizzazione: 500 x 400 x 510 mm Intervallo timer: 0–180 minuti Ventilazione: forzata interna Display: OLED 2,4" Dimensioni interne: 670 x 660 x 590 mm Produttore: DWS Paese di produzione: Italia Apertura sicura dello sportello: sì Sorgente luminosa: LED UV Dimensioni esterne: 761 x 705 x 806,5 mm Consumo energetico: 300 W Alimentazione: 100–240V / 50–60 Hz Peso: 78 kg

Kondisi: sangat baik (bekas), en-GB Gsdpfx Abox D Uqijhoin

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, tinggi total: 1.950 mm, berat keseluruhan: 350 kg, jumlah sumbu: 3, Generelle Daten Abmessungen Breite 940 mm Abmessungen Tiefe 900 mm Abmessungen Höhe 1950 mm Maschinengewicht 350 kg Hauptantrieb Achsenanzahl 3 Gjdsx D Sqmspfx Abhoin Zusätzliche Ausstattung Doppelte Extruderköpfe pro Druckmodul, ausgestattet mit einem Reinigungssystem für den Druckkopf zur Fertigung von komplexen Geometrien mit löslichem Stützmaterial. 3 Druckmodule mit unterschiedlichen Temperaturspezifikationen, speziell entwickelt für verschiedene Materialien. Diese 3-achsige 3DGence Industry F420 wurde 2021 hergestellt und verfügt über Fused Filament Fabrication mit Doppeldruckkopf sowie Reinigungssystem für komplexe Geometrien. Die Maschine bietet drei Druckmodule für verschiedene Materialien, eine Arbeitskammer von 380 × 380 × 420 mm und Druckkopftemperaturen bis zu 500°C. Wenn Sie auf der Suche nach hochwertigen 3D-Druckmöglichkeiten sind, empfehlen wir Ihnen unsere 3DGence Industry F420. Kontaktieren Sie uns gerne für weitere Informationen zu dieser Maschine. Einsatzbereiche 3D-Druck

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 211 h, de423c51-4f42-413a-bb58-284fe2f7a329 Gjdpfsx D Ehrex Abhein