DWK Werkzeugmaschinen e.K.

Kondisi: bekas, Tahun pembuatan: 2011, Technical details: X-axis travel: 7,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm Rapid traverses x/y/z: 10 m/min Table size: 8,000 x 1,300 mm Table load capacity: max. 4 t/sqm Universal head: 5 x 90° plus manual 1° Tool holder: SK 50 Milling spindle speed range: 20 – 2,000 rpm Drive power: 30 kW Spindle torque: 2-stage gearbox, 750 Nm Iaodpfsyvfyyex Ag Rep Control unit: HEIDENHAIN TNC 360 Total power requirement: 50 kW Space requirements approx.: 9.0 x 3.8 x 4.6 m Machine weight approx.: 25.0 t Universal travelling column machining centre with orthogonal milling head, water-cooled, with 1° indexing in 2 axes each (360 positions in the rear and 270 positions in the front plane), 3D wireless probe M&H 20.41, partition wall for parallel machining/setup, internal air blast, internal coolant supply 15 bar, adapter for high-speed milling spindles with torque support, operator platform travels with the machine, chip conveyor, electronic handwheel HR 410, monitored safety fences, diverse accessories (angle milling heads, clamps etc.) optionally available approx. 39,000 operating hours, approx. 16,000 spindle hours can still be inspected under power at the site.

Kondisi: bekas, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 14.000 mm, jarak lintasan sumbu Y: 4.500 mm, jarak gerak sumbu Z: 1.900 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2023 Travel/Cutting Capacities: Longitudinal (X): 14,000 mm Vertical (Y): 4,500 mm (*5,076.5 mm) Transverse (Z): 1,900 mm * The vertical machining path can be extended by 576.5 mm through the two horizontal positions of the automatically indexing milling head. Table field (2 units): Length: 6,000 mm Width: 3,000 mm Number of T-slots on the table surface: Units: 12 T-slot width: 22 mm Distance between slots: 250 mm FIBRO rotary & sliding table: Dimensions: 3,000 x 3,000 mm Sliding axis: 1,500 mm Max. table load: 40 t Year of manufacture: 2002 Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holding fixture: ISO 50, DIN 69871 AD Big Plus Pull stud: DIN 69872 Form A Main drive: Type: SIEMENS main spindle motor with a 2-stage oil-cooled ZF gearbox Drive power: 100% duty cycle, 53 kW (S1) Isdpfsyu Sznex Ag Roap Spindle speed range: Spindle speed: 20–4,000 min-1 Max. torque: S1 – 100% duty cycle, 1,531 Nm Max. feed force: X, Y, and Z axis: 31,000 N Max. rapid traverse speed: X, Y, and Z axis: 25,000 mm/min STANDARD EQUIPMENT OF THE MACHINE: Heidenhain CNC control system TNC640 High-performance orthogonal milling head Automatic tool changer (80 positions) Chip conveyor with floor exit Coolant system with 20 bar & through-spindle coolant supply (IKZ) DYNAMICS ACTIVE STABILIZER+ “DAS+ SYSTEM“ Cross-axis compensation Automatic milling head changing system Operator platform Camera for work area monitoring Pendulum machining package ACCURA HEADS Optimized Contour Milling (OCM) RepairFIT is our proven offer for a profitable introduction to our product lines. Machines available in this line are procured by us after a strict selection process and subjected to a thorough inspection (Deep-Dive-Check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 3.200 mm, jarak gerak sumbu Z: 1.500 mm, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of Manufacture: 2018 Capabilities / Travel Paths: Longitudinal (X): 6,000 mm Vertical (Y): 3,200 mm Transversal (Z): 1,500 mm Table Size: Length: 6,000 mm Width: 2,500 mm T-slot Width: 22H12 mm Distance Between T-slots: 250 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) NCS S 3560 R80B (DanobatGroup blue) Tool Holder: ISO 50, DIN 69871 AD Main Drive: Drive Type: Water-cooled inline motor Drive Power: 100 % DC, 43 kW Speed Regulation: Infinitely variable via water-cooled inline motor with star-delta switching Spindle Speed Range: Spindle Speed: 20–7,000 min-1 Torque at 37 kW/S1: 900 Nm (1045/S6) Max. Feed Force: X, Y, and Z axes 20,000 N Max. Rapid Traverse Speed: X, Y, and Z axes 35,000 mm/min Weight: approx. 44,500 kg STANDARD MACHINE EQUIPMENT: Heidenhain CNC Control TNC640 Automatic Milling Head, Diagonal (stepless) Automatic Tool Changer (40 positions) Chip Conveyor Coolant System with 20 bar & (IKZ - internal coolant supply) Prepared for NC Rotary Table Deep Hole Drilling Confirmation RepairFIT is our proven solution for a profitable entry into our product lines. Iajdjyu Swcepfx Ag Rop The machines available in this range are procured by us following a strict selection process and subjected to thorough inspection (Deep-Dive Check). After intensive cleaning, any apparent faults and defects identified are professionally repaired by our expert service team.

Kondisi: bekas, xWEGDE2406 Iedpfsyuqk Ijx Ag Rsap

Kondisi: bekas, de-hu-001 Iodeyuqkzspfx Ag Rjap

Kondisi: bekas, Tahun pembuatan: 1995, de-hu-001 Iodpfxjyt R Ahe Ag Rsap

Kondisi: bekas, Tahun pembuatan: 2011, Technical details: X-axis travel: 8,500 mm y-axis travel: 2,000 mm z-axis travel: 1,500 mm Rapid traverse x/y/z: 25 m/min Table size: 10,000 x 1,350 mm Iaedjytrw Tjpfx Ag Rsp Table load capacity: max. 5 t/m² Universal milling head: orthogonal, 1° x 1° Tool holder: SK 50 Spindle speed range: 4,000 rpm Drive power: 37 kW Spindle torque: 900 Nm Internal coolant supply: 15 bar CNC control: HEIDENHAIN iTNC 530 Tool changer: 60 positions Total connected load: 75 kW Space requirements (LxWxH): approx. 12.7 x 5.2 x 4.6 m Machine weight: approx. 35 t Universal travelling column machining center, with orthogonal milling head, water-cooled, 1° indexing in 2 axes (360 positions in the rear and 270 positions in the front plane), 3D wireless probe M&H 20.41, partition wall for parallel operation/setup, internal air blast, internal coolant supply 15 bar, adapter for high-speed milling spindles with torque support, operator platform travels with machine, chip conveyor, electronic handwheel HR 410, monitored safety fences. Various accessories (angle milling heads, clamps, etc.) available as options. Approx. 39,000 power-on hours, approx. 16,000 spindle hours. Still under power and available for viewing at the current location.

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Pengoperasian pertama: Maret 2010 Ijdpfsytf H Iox Ag Roap Kontrol: Fidia dengan handwheel HPX21 Sumbu X: sekitar 11.500 mm Sumbu Y: sekitar 1.550 mm Sumbu Z: sekitar 2.550 mm Sumbu B: ± 210° Sumbu C: ± 104° Kecepatan spindle: maks. 16.000 rpm Tipe holder alat: HSK 50A Penggerak sumbu linier Kecepatan feeding sumbu X, Y, dan Z: 16 m/menit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.500 mm, gerak cepat sumbu X: 35.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar total: 5.800 mm, tinggi total: 4.500 mm, panjang total: 13.500 mm, panjang meja: 10.000 mm, lebar meja: 1.250 mm, High-Performance Column-Type Milling Machine – Precision and Machining Power Linear RAM guidance combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 tool positions, L = 400 and Ø 250, max. 35 kg Coolant filtration with 15 bar high-pressure internal coolant supply (IKZ) Chip conveyor BLUM 3D probing system Wide bed, linear guidance in X-axis, traverse path W = 930 mm Rotary table drive pre-installed in control cabinet X-axis travel: 8,000 mm Y-axis travel: 1,300 mm Z-axis travel: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Iajdpfxjyr Dmde Ag Rsp Tool holder: ISO 40/BT/MK X-axis feed rate: 35,000 mm/min Y-axis feed rate: 40,000 mm/min Z-axis feed rate: 40,000 mm/min Auto-indexing milling head: 0.001 x 0.001 degree Operating hours: 3,800 H Machine dimensions: Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual liability is assumed. We recommend verifying all important details.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, CNC travelling column milling machine | Manufacturer: ANAYAK | Model: HVM-6000-P | Year of manufacture: 2007 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 02/03/2026): - Control powered on: 129,206 h - Machine powered on: 88,579 h - Program run time: 31,645 h - Spindle run time: 26,813 h TECHNICAL DATA Travel: - X-axis (longitudinal): 5,300 mm - Y-axis (cross): 1,500 mm - Z-axis (vertical): 2,500 mm Table: - Table surface: 6,000 x 1,200 mm - Max. table load: 15,000 kg/m² Spindle taper: - Tool holder: ISO 50 Milling head – multi-angle, 45°: - Angle positioning: Automatic, axes B and A - Speed with continuous adjustment: 60 – 4,000 rpm Feeds: - Working feedrate: 10,000 mm/min - Rapid traverse: 20,000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 Iaodpfxeyry Rfo Ag Rop - Tool changer, chain magazine for 100 tools - 2 x electronic handwheels - 2 x chip conveyors - External and internal coolant supply through spindle - Tool magazine, multiple stations - CE marking - Documentation No guarantee for completeness and accuracy of technical specifications and equipment. – Subject to prior sale – Detailed technical datasheet and further information on equipment available upon request.

Kondisi: bekas, Tahun pembuatan: 1998, portal-milling-machine-jobs-jomach-241 Iaedpfjyrcyijx Ag Rop

Kondisi: bekas, Tahun pembuatan: 2002, de-to-hu-001 Ijdpfxoyq Swuj Ag Rjap

Kondisi: bekas, Tahun pembuatan: 1999, 1 Iodpfoyqv Tajx Ag Rjap

Kondisi: bekas, Tahun pembuatan: 1990, 1 Isdpfx Agjyqvpuo Reap

Kondisi: bekas, x-Weg 10000 mm y-Weg 1100 mm z-Weg 1700 mm Steuerung Heidenhain Typ TNC 155 Werkzeugwechsler 30 Tischfläche 10000x1000 mm Höhe des Tisches über Flur 800 mm Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, Ijdpfx Agjyqvc Uo Rjap dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Kondisi: bekas, Tahun pembuatan: 1997, de-hu-it-lt-001 Iasdpfxsyqumxo Ag Rop

Kondisi: bekas, 1 Iasdpfxsyquc Hs Ag Rjp

Kondisi: bekas, Tahun pembuatan: 2001, x-weg-8000-mm-y-weg-1000-mm-z-weg-1250-mm Iaodpfx Aoyqt Izeg Rop

Kondisi: bekas, Tahun pembuatan: 1994, translate-001 Ijdpfeyqtq Ajx Ag Rjap

Kondisi: bekas, Tahun pembuatan: 2013, x-axis travel 30,000 mm y-axis travel 3,600 mm z-axis travel 1,900 mm Control unit: Heidenhain type TNC 530 i Spindle speed: 4,000 rpm Taper: DIN 69871+AD mm Feed rate: 10,000 mm/min Spindle motor: 46 kW Rapid traverse: 25,000 mm/min Chip conveyors: 2 units Table size: 31,000 x 2,500 mm Total power requirement: 85 kW Manufacturer: Soraluce No. 5619 Load hours: 9,332 Power-on hours: 27,960 Table configuration: 1 plate: 7,000 x 2,500 mm 4 plates: 6,000 x 2,500 mm Optional: 4x clamping angles Tooling package Clamping table The technical data are manufacturer or operator specifications and therefore non-binding for us. Prior sale reserved; exclusively our terms and conditions of business and sale apply. About us: More than 400 machines in stock Over 15,000 m² of storage area, crane capacity 70 t More than 10,000 accessories and items for your workshop Are you looking to sell machines, production lines or your business? Please contact us. Further offers can be found on our website. Isdpfx Ageyqtnno Reap Inspections are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 800 mm, panjang pemakanan sumbu X: 1.200 mm, panjang umpan sumbu Y: 600 mm, gerak cepat sumbu X: 10.000 m/menit, pergeseran cepat sumbu Y: 10.000 m/menit, pergerakan cepat sumbu Z: 10.000 m/menit, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 10 rpm, daya motor spindle: 12.000 W, Kami menawarkan mesin frais kolom bergerak Sachman VEL 90 MC/I ini, siap pakai, tahun pembuatan 1994. Larik X: 1200 mm Iasdpfx Ajypxpzog Rop Larik Y: 600 mm Larik Z: 600/870 mm Daya motor spindle: 12 kW Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirim pesan atau menghubungi kami.

Kondisi: bekas, Tahun pembuatan: 2010, soraluce-ta35a-sale-en Iasdpfx Ajyphb Teg Rsp

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3460 1030 9, jenis arus masuk: tiga fasa, Kami menawarkan mesin bor radial Soraluce TRO-1250 bekas ini. Mesin dalam kondisi operasional penuh dan masih digunakan ringan sehari-hari. Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan hubungi kami melalui pesan atau telepon. Pembeli bertanggung jawab atas pengangkutan dan pemindahan. Produk berada di Lahti. Uji coba dapat dilakukan di lokasi. Iedpfxsymybts Ag Roap

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 7.000 mm, jarak lintasan sumbu Y: 1.600 mm, jarak gerak sumbu Z: 1.400 mm, panjang pemakanan sumbu X: 7.000 mm, panjang umpan sumbu Y: 1.600 mm, panjang umpan sumbu Z: 1.400 mm, Complete with all assemblies required for installation/commissioning x = 7m y = 1.6m z = 1.4m (800mm + quill = 600mm) General overhaul 2007, year of manufacture 1991 Rapid traverse 12,000 mm/min / w axis 6,000 mm/min New Siemens Sinumerik 840D CNC, new drive motors, refurbished linear guides, new electrical cabinets. ECOCUT 1 was only operated for a few hours thereafter. TDV 2 rotary table: max. workpiece weight 6t / clamping surface 1000x1000 mm TDV 3 rotary table: max. workpiece weight 12t / clamping surface 1250x1600 mm Isdpfx Ageyk Uyfs Rjap Accessories: 2 angular milling heads / chain-type tool changer / platen / full enclosure / Knoll hopper conveyor / extraction unit / coolant system with band filter. Complete with all BWF locators for mounting the machine bed and clamping plate.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2001, jam operasional: 20.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 2.500 mm, posisi kepala milling: 0,001, gerak cepat sumbu X: 10.000 m/menit, pergeseran cepat sumbu Y: 15.000 m/menit, pergerakan cepat sumbu Z: 15.000 m/menit, kecepatan spindel (maks.): 3.000 rpm, panjang meja: 9.000 mm, lebar meja: 1.500 mm, tahun perombakan terakhir: 2025, MESIN FRAIS ZAYER 30KCU 8000 PERGERAKAN 8000X1250X2500 CNC HEIDENHAIN 430 KEPALA 45º 6000 RPM, PRESISI MILISIMAL KEPALA KELUAR LANGSUNG 6000 RPM MEJA TETAP 9000 MM MAGASIN 60 ALAT PENGELUAR SERPIHAN Iajdpfx Agoyivdvo Rep MEJA PUTAR 2000X2000