SIRtec GmbH

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ±110° C-axis: ±360° Control: Heidenhain TNC 640 with HR 520 handwheel Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminium with cross T-slots every 250 mm Max. load: 1,000 kg distributed over the entire surface 2-Axis Milling Head ST8 Spindle power: 15 kW Spindle speed: max. 24,000 rpm Torque: 20.9 Nm Tool holder: HSK 63F Tool release: pneumatic Air blast: external Drives Linear Axes Feed rate X- and Y-axis: up to 60 m/min Feed rate Z-axis: up to 40 m/min Gkjdpsxm Tv Asfx Adqjc Accuracies Positioning accuracy: 0.10 mm Repeatability: 0.05 mm Colour Enclosure, gantry, control cabinet: light grey Z-slide and milling head: blue Additional Equipment - 15-position tool changer - Oriented milling spindle, e.g. for thread cutting - Direct path measuring system on all 5 axes - Two-sided enclosure - Heidenhain TT140 (optional at extra cost) - Heidenhain TS260 (optional at extra cost) - 3D machine model (optional at extra cost) Condition of the Machine Fully functional condition, immediately available and still under power until November 2025

Kondisi: baru, Tahun pembuatan: 2025, 10463 Gkjdpoxmd Szsfx Adqjc

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 85 m/menit, laju pemakanan gandar Y: 85 m/menit, laju pemakanan sumbu Z: 40 m/menit, panjang meja: 3.500 mm, lebar meja: 2.000 mm, kecepatan spindel (maks.): 28.000 rpm, tinggi meja: 250 mm, gerak cepat sumbu X: 85 m/menit, pergeseran cepat sumbu Y: 85 m/menit, pergerakan cepat sumbu Z: 40 m/menit, beban meja: 5.000 kg, torsi: 70 Nm, kecepatan rotasi (maks.): 28.000 rpm, berat keseluruhan: 22.000 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Year of manufacture: 2015 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,000 mm A-axis: +/- 115° C-axis: +/- 270° Gedpfx Adexl Tl Uoqskc Control unit: SIEMENS SINUMERIK 840D SL Clamping table, sub-floor Length x width x height: approx. 3,500 x 2,000 x 250 mm (cast iron) Table load: max. 5,000 kg/m² T-slots: 22H12 T-slot spacing: 250 mm Milling spindle Spindle power S1 / S6: 40 / 54 kW Spindle speed: max. 28,000 rpm Tool holder: HSK 63A Torque S1 / S6: 51 / 70 Nm Linear axis drives Feed rate X and Y axis: up to 85 m/min Feed rate Z axis: up to 40 m/min Connection data Connected load: approx. 55 kW Pre-fuse: 45 A Dimensions, weights Machine footprint: approx. 6,650 x 6,200 x 5,000 mm Total weight: 21,000 kg Description: Additional equipment - 2x chip conveyors - protective bellows with purge air - 40 bar ICS coolant supply with belt filter system - minimum quantity lubrication - 30-position tool changer Optional - Renishaw RMP60 Machine condition Fully functional, regularly serviced by the machine manufacturer. Immediately available and still under power. Special feature The machine requires a special foundation so that the table and chip conveyors can be installed below floor level.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 82.500 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 5.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 1.750 mm, kecepatan pemakanan sumbu X: 65 m/menit, laju pemakanan gandar Y: 65 m/menit, laju pemakanan sumbu Z: 65 m/menit, kecepatan spindel (maks.): 20.000 rpm, gerak cepat sumbu X: 65 m/menit, pergeseran cepat sumbu Y: 65 m/menit, pergerakan cepat sumbu Z: 65 m/menit, torsi: 63 Nm, berat keseluruhan: 90.000 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ± 360° Maximum workpiece dimensions: 3,800 mm (X direction) 1,800 mm (Y direction) 1,150 mm (Z direction) 5-axis machining in a single setup (90° fixed A-axis) using a 300 mm long tool is possible. Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table The machine is offered without a machine table. We are happy to offer a customized solution at additional cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Gkjdpsxl R Hvefx Adqjc Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped), A & C axes: 2,000 Nm Linear axis drives Feed rate X, Y, and Z axes: up to 65 m/min Axis acceleration X, Y, and Z axes: up to 5 m/s² Electrical specifications Voltage: 400 V Frequency: 50 Hz Power consumption: 130 kW Dimensions & weights Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 Light Grey Milling head and applications: RAL 5002 Aquamarine Blue Additional features - Minimum quantity lubrication - 50-tool automatic tool changer - Work area enclosure Optional at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Machine condition Fully functional, very good condition. Can be inspected under power until April 2026.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, Nachgerüstet: 2025/2026 Numerische Steuerung: HEIDENHAIN TNC-i530 Technische Merkmale Abmessungen Gjdpjxllilofx Adqekc - Tischabmessungen: 8.500 x 2.500 mm - Maximale Tischbelastung: 35.000 kg - Anzahl T-Nuten: 17 - T-Nutenmaße: 22 mm Verfahrwege der Achsen - X-Achse: 8.000 mm - Y-Achse: 3.800 mm - Z-Achse: 1.500 mm - Vertikale Bearbeitungsfreiheit (VC): 168 / 1.168 mm - Abstand zwischen den Ständern: 3.100 mm Fräskopf - Automatischer Schwenkkopf (UAD - 0,02°) - Werkzeugspannsystem: Hydraulisch - Werkzeugaufnahme: ISO50 (DIN69871) / Zugbolzen: DIN69872 - Drehzahlbereich: 6.000 U/min - Spindelleistung: 30 kW Vorschübe - Eilgang (X / Y,Z): 7.200 / 12.000 mm/min Gewicht und Abmessungen - Maschinengewicht ca.: 79.000 kg - Maschinenabmessungen ca.: 22.700 x 7.660 x 6.800 mm Zubehör - Einhausung: 2 Schiebetüren mit neuer, umlaufender Schutzgitter-Einfriedung - Automatischer Werkzeugwechsler: ATC-60 - Späneförderer: 2 Längsförderer, Scharnierband - Elektronisches Handrad: Neu, HR-510 - Kühlmittelanlage: Außen und interne Hochdruckkühlung durch die Spindel Verkaufsbedingungen - Garantie: 6 Monate auf mechanische Ersatzteile - Preis und Verkaufsbedingungen: Auf Anfrage Alle technischen Details auf Anfrage.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 3.200 mm, jarak gerak sumbu Z: 1.400 mm, panjang meja: 6.000 mm, lebar meja: 3.000 mm, kecepatan spindel (maks.): 24.000 rpm, jarak antara penyangga: 4.000 mm, Data teknis • Permukaan meja penjepit: 6.000 × 3.000 mm • Sumbu X (pergerakan longitudinal): 6.000 mm • Sumbu Y (pergerakan transversal): 3.200 mm • Sumbu Z (pergerakan vertikal): 1.400 mm • Jarak antara tiang: 4.000 mm • Kecepatan feeding: 30.000 mm/menit • Beban meja: 4.000 kg/m² • Kecepatan spindle maks.: 24.000 1/menit • Daya spindle maks. (S1-100%): 42 kW Gksdpfjxlip Aox Adqsc • Torsi spindle maks. (S1-100%): 67 Nm • Tipe holder alat: HSK63A • Penukar alat: 24 posisi • Sumbu C: ±360° • Sumbu A: +95° / -110°

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 1.700 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MP7/5/P, jarak pergerakan sumbu X: 730 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 400 mm, panjang pemakanan sumbu X: 585 mm, panjang umpan sumbu Y: 250 mm, panjang umpan sumbu Z: 400 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 50 m/menit, kecepatan spindel (min.): 1 rpm, kecepatan spindel (maks.): 42.000 rpm, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 80 m/menit, pergerakan cepat sumbu Z: 80 m/menit, jenis arus masuk: tiga fasa, beban meja: 60 kg, berat benda kerja (maks.): 60 kg, berat keseluruhan: 8.000 kg, MP7-5-axis with integrated pallet changer 5-axis with rotary/swivel axis Travel range X/Y/Z: 585x250x400 mm B-axis travel: +/- 105 degrees Gjdpfsxlctbox Adqekc C-axis travel: unlimited Workpiece weight: 60 kg Distance machine table–spindle nose: 450 mm Machine dimensions (W x D x H): 2845x2370x3000 mm Machine weight: 8000 kg Spindle speed: 42,000 rpm Equipment: Control: Heidenhain TNC 640 Main spindle: HVC140 HSK-E40 with rotary union for internal media supply - Maximum speed 42,000 rpm - Milling power S1/S6: 10 kW/13 kW - For internal coolant supply (air and emulsion) Oil mist extraction for oil/emulsion Dust extraction: L-CUT Machine-integrated workpiece changer for 36x EROWA ITS50 or 18x EROWA ITS115 Handheld control unit with handwheel and enabling switch Measuring probe system: Renishaw OMP400 Aerosol DRY LUBRICATION (ADL) - Fine external and through-tool media application Table chuck: EROWA PowerChuck P for 5-axis Blum laser LC50 Media distributor by MHT Tool changer for 90 tools, HSK E40 12 months warranty Transport Initial commissioning on site Training

Kondisi: bekas, Tahun pembuatan: 1993, jam operasional: 23.927 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 85280, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 1.350 mm, jarak gerak sumbu Z: 350 mm, berat keseluruhan: 23.000 kg, penjepit spindle: MK 4, Kontrol: Siemens Sinumerik dengan meja penjepit magnetik, ukuran 4.000x1.500 mm, dijual karena pailit. Dapat dilihat dalam keadaan teraliri listrik. Gjdpfexk U T Rjx Adqjkc

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 30 rpm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.150 mm, panjang meja: 2.800 mm, lebar meja: 1.500 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, de-to-hu-it-lt-lv-nb-nl-pl Gkjdpfxoxixrbe Adqoc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.612 mm, jarak lintasan sumbu Y: 5.645 mm, jarak gerak sumbu Z: 1.250 mm, panjang meja: 7.000 mm, lebar meja: 2.500 mm, kecepatan spindel (maks.): 4.500 rpm, jarak antara penyangga: 3.800 mm, Technical Data • Table clamping surface: 7,000 × 2,500 mm • X-axis (longitudinal travel): 6,000 + 612 mm • Y-axis (cross travel): 4,670 + 975 mm • Z-axis (vertical travel): 1,250 mm • W-axis (vertical travel): 1,200 mm • Distance between columns: 3,800 mm • Distance table clamping surface to spindle nose: 2,015 mm • Drive power AC motor: 60 kW • Spindle speed in 2 steps, digital spindle drive: 60 – 4,500 rpm • Feed rate in CNC mode (rapid traverse): up to 10,000 mm/min • X-axis: 20,000 mm/min • Y- and Z-axes each: 25,000 mm/min • C-axis rotary table: ±180° • 45° milling head rotation: 360° Main components of the machine • Heidenhain path control iTNC 530 with 15" screen • Tool magazine with 60 stations • Rotary table for operation of several milling heads with automatic milling head change, consisting of collet chuck system for accommodating various milling heads, quick couplings for hydraulics, coolant and power supply, as well as corresponding electrical safety switches • Centering of the milling heads on the rotary table using Hirth face gearing (on mounting plate and respective milling head) • 2 x milling heads: straight milling head (direct spindle), 45° automatic milling head • Crossbeam motorized traversable (for positioning only) Gksdpoxgr Epjfx Adqsc • Operator platform: 2 operator platforms with protective enclosure and integrated control panel, traveling along X-direction, each with 2 doors • Chip conveyor on both sides of the table as well as a transverse conveyor • Longitudinal drive X-axis and cross drive Y-axis via rack and pinion and 2 servomotors (backlash-free electronically preloaded, master-slave principle) • Vertical adjustment Z-axis by means of ball screw (Ø 80) with preloaded double nut • Zayer guide system consisting of inserted or screwed-on, hardened steel guideways • All axes equipped with INA crossed roller shoes on each running surface • Counter-guides of all axes additionally plastic-coated for optimal damping • Anchoring and leveling elements • The machine conforms to currently valid EC directives The above data are taken from the machine documentation. The seller assumes no liability for their completeness or accuracy. The actual technical data and functions of the machine are decisive.

Kondisi: baik (bekas), Tahun pembuatan: 1999, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.150 mm, panjang total: 6.000 mm, lebar total: 5.200 mm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 10 m/menit, Produsen: FOOKE Model: Endura Tipe 8 Tahun Pembuatan: 1999 Kontrol: Siemens 840 D Powerline Holder alat: HSK-A63 Kecepatan putar maks.: 16.000 Perjalanan X: 3000 mm Perjalanan Y: 2500 mm Gksdpoxgg Urofx Adqsc Perjalanan Z: 1150 mm Sumbu A: +/- 100 mm Sumbu C: +/- 181,5 mm Ukuran meja: 3000 mm x 2500 mm Opsi: Udara tiup luar Kinematika: Kepala fork/garpu

Kondisi: baik (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 6.230 mm, jarak lintasan sumbu Y: 4.250 mm, jarak gerak sumbu Z: 1.100 mm, panjang meja: 6.000 mm, lebar meja: 3.000 mm, beban meja: 15.000 kg, de-hu-001 Gedpexf Haxjfx Adqjkc

Kondisi: baik (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 4.230 mm, jarak lintasan sumbu Y: 1.950 mm, jarak gerak sumbu Z: 750 mm, panjang meja: 4.000 mm, lebar meja: 1.250 mm, beban meja: 11.000 kg, CNC gantry milling machine KAO MING - KMC 4000 SV-H Double guideway and flat guide design Head changer for multi-sided machining of large components Automatic tool changer for horizontal and vertical milling heads, swiveling Distance table to spindle nose: 213–1093 mm Distance table to spindle center: 130–… mm Horizontal head indexing: 5 degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torque: 1018 Nm, ISO 50 Universal milling head type Huron X-axis travel: 4230 mm Y-axis travel: 1950 mm Z-axis travel: 750 mm Distance between columns: 1500 mm Table length: 4000 mm Table width: 1250 mm Table load capacity: 11,000 kg Feed X-axis: 12,000 mm/min Feed Y-axis: 15,000 mm/min Feed Z-axis: 12,000 mm/min Tool holder: 50 ISO/BT/MK Spindle power: 26 kW Spindle speed: 4,400 rpm Gksdpfx Aexf E Twjdqec Tool changer: 30 positions Chip conveyor: Yes Coolant system: Yes Length: 10,100 mm Width: 4,500 mm Height: 4,250 mm Weight: 30,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, these do not constitute representations or contractual terms. We recommend that you verify all key details.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.100 mm, jarak gerak sumbu Z: 850 mm, kecepatan spindel (maks.): 6.000 rpm, 001 Gedexd H H Ajpfx Adqekc

Kondisi: bekas, Tahun pembuatan: 2020, Manufacturer: Heyligenstaedt Model: Heynumill XL 3500 PF Year of manufacture: 2020 Clamping surface: X = 5500 mm Y = 3000 mm Column clearance: Y = 3500 mm Z = 2200 mm Travel paths: X = 6000 mm Y = 4400 mm Z = 1500 mm Table load: max. 40 tons Milling performance: S1 79.6 kW S6 96.0 kW C-axis: infinitely rotating Machine bed made of granite for high precision Enclosure: On both sides Gsdpexdk Tasfx Adqokc Side-mounted tool changer Tool table with T-slots, size 28 Chip conveyor: Underfloor conveyor with 2 vertical sections Coolant system from Lahntechnik Hydraulic unit from Kuwega Control cabinets: Air-conditioned CNC Control: Heidenhain iTNC 640 incl. hand control unit Milling heads: 1 pc. Angle milling head WKF 100/560 1 pc. 2-axis fork-type milling head FK 110 / 2D / 6000 Either: 1 pc. Straight milling head FK 120/450 /6000 or 1 pc. Straight milling head FK 100/610 / 6000 Operating hours: CNC on: approx. 8467 Machine on: approx. 2996 Rapid traverse rates: X, Y axes: 30,000 mm/min Z axis: 15,000 mm/min Machine dimensions: Overall machine length: 14,700 mm Overall length with enclosure: 15,200 mm Overall width with enclosure: 9,950 mm Ram upper edge (highest position) above floor: 6,950 mm All information given without guarantee. Subject to prior sale. Free loaded on truck.

Kondisi: siap digunakan (bekas), Mesin Milling Tipe Bed CNC Rambaudi Ram Mill 800 Ukuran meja: 3700x800 mm Gkjdpfxjxddp Ie Adqsc Perjalanan X: 3000 mm Perjalanan Y: 1000 mm Perjalanan Z: 800 mm CNC Selca 3045 Sumbu ke-4 diameter 400 mm dengan tail stock lengkap dengan perkakas

Kondisi: baik (bekas), Tahun pembuatan: 2012, Ref.-Nr.: 10290 Produsen: KOLB KLUEPPELBERG Tipe: Cubimat YC 2000 Tahun Pembuatan: 2012 Jenis Kontrol: CNC Sistem Kontrol: Siemens Sinumerik 840 D Lokasi penyimpanan: Halberstadt Negara asal: Jerman Nomor Mesin: 016453-20.1 Perjalanan X: 7.000 mm Perjalanan Y: 4.000 mm Gkjdpfx Adsxdaxljqsc Perjalanan Z: 4.000 mm Perjalanan W: 2.000 mm Kecepatan spindel kerja: 4.000 rpm Torsi maksimum: 2.100 Nm Bobot benda kerja maksimum: 20 t Ukuran meja (p x l): 2.800 x 2.000 mm Beban meja maksimum: 18.000 kg Tipe penahan alat: SK 50 Jumlah slot alat: 360 Jarak antar pilar: 3.200 x 4.000 mm Informasi tambahan: - 4 kepala milling tersedia - 1 kepala universal - Pick Up Head Station Mesin dapat diperiksa dalam kondisi terhubung listrik sesuai kesepakatan.

Kondisi: baru, Tahun pembuatan: 2025, Ref.-No.: 10464 Manufacturer: IGREK Model: 3500 XXL Year of manufacture: 2025 Control type: CNC Control system: Siemens 840 D / Heidenhain iTNC 640 Location: Istanbul Country of origin: Türkiye X-axis travel: 10,500 mm Y-axis travel: 3,500 mm Z-axis travel: 1,400 mm A-axis: +/- 115° B-axis: 360° Maximum torque: 235 Nm Rapid traverse X/Y/Z: 30 m/min Spindle drive power: 54 kW Maximum table load: 4,000 kg Tool holder: HSK-A100 Spindle speeds: 12,500 rpm Machine length: 16,000 mm Machine width: 7,400 mm Machine height: 8,500 mm Weight: 195 t Additional Information: IGREK 3500 XXL – Custom Precision for Large-Scale Projects Gkedsxc Tr Ajpfx Adqec The IGREK 3500 XXL is a state-of-the-art CNC 5-axis gantry milling machine, specifically engineered for the highly precise machining of large workpieces. Built in 2024, immediately available, and equipped with the latest technology, it meets the most demanding standards in heavy industry and mechanical engineering. Key Features: - Gigantic Work Envelope: With travel distances of 10,500 mm (X), 3,500 mm (Y), and 1,400 mm (Z), this machine provides exceptional flexibility when machining oversized components. - 5-Axis Simultaneous Machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when processing complex parts. - Powerful Spindle: Equipped with up to 12,500 rpm, a maximum torque of 235 Nm and a spindle drive power of 54 kW – ideal for high-performance machining operations. - Robust and Durable: With a weight of 195 tons and a table load capacity of up to 4,000 kg, this machine is built for heavy-duty applications. - Innovative Tool Holding: The HSK-A100 tool interface allows for rapid tool change and increased efficiency. - Speed and Efficiency: Rapid traverse speeds of 30 m/min on all axes ensure maximum productivity. Technical Data Overview: - Travel: X 10,500 mm / Y 3,500 mm / Z 1,400 mm - Spindle power: 54 kW - Spindle speed: 12,500 rpm - Table load capacity: up to 4,000 kg - Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm - Weight: 195 tons Additional Advantages: The machine is supplied with advanced Siemens 840D or Heidenhain iTNC 640 CNC control and offers global warranty and service support from the manufacturer. Rely on the IGREK 3500 XXL for precision and efficiency in large-part machining. Contact us now for a non-binding quote!

Kondisi: bekas, Tahun pembuatan: 2003, Technical details: X-axis travel: 4000 mm Y-axis travel: 3000 mm Z-axis travel: 1500 mm Total power requirement: 30 kW Space requirement approx.: 9.5 x 6.7 x 6.2 m Passage height: 1550 mm Passage width: 2500 mm Table width: 2000 mm Table length: 3000 mm Maximum table load: 12,000 kg Tool holder: HSK-A100 Maximum tool weight: 30 kg Gjdpfexc Idasx Adqokc Maximum tool diameter: 250 mm Maximum tool length: 500 mm Spindle speed range: 5–6,000 rpm Maximum permissible torque at milling spindle: 800 Nm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 6.000 mm, jarak gerak sumbu Z: 1.250 mm, kecepatan spindel (maks.): 12.000 rpm, model controller: Heidenhain iTNC530 mit Handrad, 1 Godpsxcld Dsfx Adqskc

Kondisi: bekas, Tahun pembuatan: 2005, ms-7677 Gsdpfx Adjxcbiioqskc

Kondisi: bekas, Tahun pembuatan: 2016, x-travel 6,500 mm y-travel 4,250 mm z-travel 1,500 mm Control HEIDENHAIN iTNC 530 HSCI Table size 7,500 x 3,000 x 300 mm Distance between columns 3,800 mm Rapid traverse x/y/z 30,000 mm/min Tool holder HSK 100 Spindle speed 6,000 rpm Gear stages 2 Motor power 37 kW Operating hours 28,475 h Spindle hours 12,629 h Tool changer 60 positions/tools Internal coolant supply 36 bar Chip conveyor double Milling head 5-axis milling head OAD Total power requirement 80 kVA Machine weight approx. 85 t OAD milling head fully water-cooled. - 6,000 rpm without time limitation. - The patented rotary system by Correa with a fixed double-toothed gear allows rotation in increments of 0.02º. As this is not a freely moving gearing, maximum rigidity and precision are ensured. - Enables negative angles up to 45 degrees. Godpfx Adjxb Ed Uoqjkc - Milling spindle mod. FCT (4,000 rpm / 1,893 Nm / HSK 100) - Head extension mod. AL600 (1,500 rpm / 1,298 Nm / ISO 50) - Head changer station for 3 heads - M&H 20.41

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Travel X-axis: 2,200 mm Travel Y-axis: 3,200 mm Travel Z-axis: 1,250 mm Control: FIDIA C20 C-axis: +/- 200° Head swivel range: +90° / -100° Rapid traverse (X/Y/Z): 50 m/min each Tool holder: HSK A63 Gkodpfx Ajxa Hl Rjdqec Tool changer: 16 positions Spindle speed: up to 18,000 rpm Clearance between uprights: 4,060 mm Distance spindle nose – clamping surface: 1,796 mm Connected load: 238 kVA Machine weight: approx. 45 t Required floor space: approx. 9 x 7 x 5 m This JOBS LinX6 is in very good condition and can be inspected under power at the owner’s site upon arrangement. Description: JOBS LinX6 Type: 5-axis machining center with moving gantry and fixed table Control: FIDIA C20 Year of manufacture: 2001 Travel X axis: 2,200 mm Travel Y axis: 3,200 mm Travel Z axis: 1,250 mm A-axis travel: +90° / -100° C-axis travel: +200° / -200° Max feed in X/Y/Z: 50 m/min Clamping surface table: 4,000 x 2,500 mm Clearance between uprights: 4,060 mm Clearance height table to gantry: 1,807 mm Clearance height table to spindle nose: 1,796 mm Milling head: T2K D.01.06 Tool interface: HSK A63 Tool changer: 16 positions Spindle power: S1 from 6,800 rpm 40 kW Spindle speed: 250 to 18,000 rpm Total connected load: 238 kVA Special equipment: - Siemens linear motors on all axes - JIMS / preparation for semi-automatic motor spindle change - Spare exchange spindle included - External coolant supply / 1,000 l tank - Minimum quantity lubrication - Scraper-type chip conveyor - Renishaw TS27 tool measuring system - Ethernet port - Handheld control unit Miscellaneous: Complete documentation available Machine weight: approx. 45 t Floor space required: 8.7 m (width) x 6.7 m (depth) x 5.1 m (height)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, Retrofit: 2025 CNC: NUEVO/NEW HEIDENHAIN TNC-i640 Technical Specifications Table Dimensions: 4,500 x 2,000 mm Number of T-slots: 11 T-slot Size: 22 mm Axis Travels X-axis: 4,000 mm Y-axis: 3,000 mm Z-axis: 1,000 mm Vertical Capacity (VC): 240 - 1,240 mm Distance Between Columns: 2,500 mm Milling Head Auto-indexing Universal Head (UAD – 0.1º) Tool Clamping: Hydraulic Spindle Taper: ISO 50 Spindle Speed: Up to 6,000 rpm Spindle Power: 30 kW Gkodpexaqh Nefx Adqoc Feed Rates Working Feed Rate: 5,000 mm/min Rapid Traverse (X / Y, Z): 15,000 / 12,000 mm/min Weight & Dimensions Max. Table Load: 10,000 kg Approx. Machine Weight: 35,500 kg Approx. Machine Dimensions: 10,975 x 4,770 x 5,345 mm Accessories Guarding with two doors and new perimetral safety fencing Automatic Tool Changer: ATC-60 (option to purchase without ATC) Chip Conveyor: 1 transversal Electronic Handwheel: New HR-510 Coolant: External and internal high-pressure through spindle Sales Conditions Warranty: 6 months on mechanical spare parts Sales Terms: Upon request View all technical features

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 1.500 mm, beban meja: 12.000 kg, kecepatan rotasi (maks.): 6.000 rpm, jumlah slot dalam magazin alat: 100, TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 3,000 mm Z-axis: 1,500 mm C-axis: -10 to 370° B-axis: -5 to 95° Table, longitudinal: 0 - 30 m/min Milling and drilling unit, horizontal: 0 - 60 m/min Spindle slide, vertical: 0 - 60 m/min Spindle unit horizontal/vertical: 0-15 / 0-10 rpm Clear height: 1,550 mm Clear width: 2,500 mm Table Clear height between table and spindle nose: 1,550 mm Clear width: 2,500 mm Table width: 2,000 mm Table length: 3,000 mm T-slots, transverse: 22 H8 mm, spacing 250 mm T-slots, longitudinal: 15 H7 mm (250 mm from outside, 10 mm deep) Max. table load: 12,000 kg Drilling spindle speed range 1st gear: 5 - 1,400 rpm 2nd gear: 25 - 6,000 rpm Max. torque: 800 Nm Drive power: 30 kW Cross-section of spindle slide: 400 x 400 mm Gksdpfxow T Rx Ae Adqec Tool system Tool holder according to DIN 69893: HSK-A 100 Number of tool stations: 100 Max. tool weight: 30 kg Max. tool diameter: 250 mm Max. tool length: 500 mm Distance from station to station: 140 mm Average chip-to-chip time: < 20 s Rapid traverse speeds X-axis table longitudinal: 0 - 30 m/min Y-axis milling and drilling unit horizontal: 0 - 60 m/min Z-axis spindle slide vertical: 0 - 20 m/min C-axis spindle unit horizontal: 0 - 15 rpm B-axis spindle unit vertical: 0 - 10 rpm MACHINE DETAILS Overall length of machine: 9,500 mm Overall width of machine: 6,700 mm Overall height of machine above floor: 6,200 mm Coolant system Pump pressure: 12 bar (AKM), 50 bar (IKM) Delivery rate AKM: 40 l/min at 1 bar Delivery rate IKM: 20 l/min at 40 bar at the spindle Coolant principle: two-phase drum separator Coolant volume: 1,500 L Chip conveyor system Usable width of longitudinal conveyor: 450 mm (2 units) Usable width of cross conveyor: 225 mm (1 unit) On both sides of machine bed, cross conveyor with overflow transport