MazMac Limited

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jarak pergerakan sumbu X: 220 mm, jarak lintasan sumbu Y: 55 mm, jarak gerak sumbu Z: 670 mm, tinggi total: 3.000 mm, berat keseluruhan: 8.000 kg, produsen pengendali: HURCO, model controller: CNC, panjang produk (maks.): 5.500 mm, jumlah sumbu: 4, en Ksdpfx Aaoyccmdo Nsll

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 80801, panjang pembubutan: 1.000 mm, kecepatan spindel (min.): 1.000 rpm, kecepatan spindel (maks.): 1.000 rpm, gerak cepat sumbu X: 20 m/menit, pergerakan cepat sumbu Z: 20 m/menit, jenis arus masuk: tiga fasa, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Pusat pemesinan CNC bubut dan milling buatan Mazak, tipe 40N-ATC N/C (ST40ATC), tahun pembuatan 1989, kontrol Mazatrol T-3E, 4 sumbu, penukar alat 30 posisi, alat bertenaga, konveyor serpihan. Kedpoyccl Hjfx Aa Nell

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, doosan-puma-2600lmb-2014-cnc-lathe-with-live-tooling-and-c-axis- 1-350-mm-z-travel-fanuc-i-series-cnc-10-4%E2%80%9D-color-lcd-ez-g uide -swing-over-bed-780-mm -swing-over-cross-slide-630-mm -maximum-turning-diameter-376-mm -maximum-turning-length-1-245-mm -travel-x-260-mm--z-1-350-mm -chuck-diameter-380-mm -bar-capacity-102-mm -spindle-nose-asa-a2-11 -turning-spindle-2-800-rpm-22-kw -driven-turret-12-stations-bmt-65p*-indexing-1-station-0-25-sec Klodpfxeyb Sryj Aa Njl -driven-tool-power-5-5-kw-5-000-rpm -c-axis-indexing-0-001-mm -tailstock-quill-diameter-stroke-100-mm-100-mm included-equipment: -3-jaw-hydraulic-chuck-samchully-hch-15%E2%80%9D-380-mm-dia -c-axis-360%C2%B0-0-001%C2%B0-increment -automatic-tool-presetter -integrated-tailstock -high-pressure-coolant-pump -chip-conveyor -preparation-base-and-logic-for-steady-rest -hydraulic-steady-rest-smw-autoblok-slu-3-1-20-165-mm -set-of-tool-holders -doosan-and-fanuc-manuals-set condition: machine-in-good-condition-can-be-inspected-under-power-immediate -delivery

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jumlah sumbu: 9, NAKAMURA-TOME WY150 9-sumbu ini diproduksi pada tahun 2023. Mesin ini adalah pusat turning-milling dengan peralatan lengkap berupa pemegang alat, termasuk 6 pemegang eksternal, 4 pemegang internal, 3 pemegang alat putar radial (berpenggerak), dan 12 pemegang alat putar aksial (berpenggerak), serta satu chuck collet dan satu chuck tiga rahang. Manfaatkan kesempatan untuk membeli pusat turning-milling NAKAMURA-TOME WY150 ini. Silakan hubungi kami untuk informasi lebih lanjut. Perlengkapan tambahan • 6 pemegang alat eksternal • 4 pemegang alat internal Kedpfx Aeyb Saksa Noll • 3 pemegang alat putar radial (berpenggerak) • 12 pemegang alat putar aksial (berpenggerak) • 1 chuck collet • 1 chuck tiga rahang

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Kontrol Fanuc, spindle frais, revolver, counter-spindle, konveyor serpihan, probe Blum, robot, short loader, paket dudukan alat. Commissioning 01.2025. Klodpsya I D Njfx Aa Nsl

Kondisi: bekas, Hurco Hawk Model 5D, dengan kontrol CNC Dynapath Delta, 70-3800 RPM, meja 1000 mm x 330 mm. Spindle BT 40. Kondisi sangat baik, berasal dari universitas. Kedjya Hrrspfx Aa Noll

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Diameter pembubutan: 230/300 mm Panjang pembubutan: 452 mm Besar putaran di atas bed: 700 mm Kontrol: Fanuc Lubang spindle: 65 mm Klodoya Edgopfx Aa Nol Kecepatan spindle: 4500 rpm Motor spindle utama: 15/11 kW Torsi maksimum pada spindle: 179 Nm Jumlah alat pada turret: 12 BMT 55 Stasiun penggerak: 12 BMT 55 Kecepatan alat berputar: 5000 rpm Daya spindle milling: 5,6/3,7 kW Sumbu Y: +/- 60 mm Sub spindle: 7,4/4,9 kW Kecepatan sub spindle: 6000 rpm Pergerakan cepat: 36/36/10 m/menit Sub spindle Dimensi (P-L-T): 3,9 x 1,65 x 2,0 m Berat mesin: ca. 4,7 t Ukuran chuck spindle utama: 210 mm Ukuran chuck sub spindle: 125 mm Pengukur alat otomatis – Q-setter Konveyor chip Penangkap komponen dengan boks 2 alat berputar BMT 55 Set alat standar Mesin bubut CNC dengan alat berputar, sumbu Y dan sub spindle.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, MAZAK QUICK TURN NEXUS 350-II MY x 1500 Diameter ayunan maksimum: 750 mm Diameter pemesinan maksimum: 420 mm Panjang pemesinan maksimum: 1.539 mm Kecepatan putar milling maksimum: 4.500 rpm Kecepatan putar spindle maksimum: 3.300 rpm Diameter batang maksimum: 102 mm Mesin dilengkapi dengan: - CNC kontrol Mazatrol Matrix - Chuck tiga rahang KITAGAWA BB-212, diameter 304 mm - Tool Eye - Sumbu C - Sumbu Y - Tailstock NC Kledpfxjya Du Ro Aa Nel - Penyangga tengah hidrolik SMW - Spindel utama dengan lubang batang 102 mm - Pompa pendingin berdaya tinggi - Konveyor serbuk, pengeluaran samping - 8 buah dudukan alat tetap - 2 buah dudukan alat penggerak

Kondisi: baik (bekas), Tahun pembuatan: 2011, Takisawa TMM 250 M3, tahun pembuatan 2011, kontrol Fanuc 160 is TB, diameter batang spindle utama hingga 76 mm, diameter batang spindle sub hingga 51 mm, revolver 15 posisi, alat bertenaga, sumbu C, spindle sub, panjang pembubutan maks. 1.230 mm, pendinginan tekanan tinggi 8 bar, spindle milling sumbu B dengan Capto C6, pergantian alat 60 posisi Capto, sumbu B dapat diputar +/- 115°, pengunci sumbu B setiap 1°, daya sumbu B 7,5 kW / 8.000 rpm, sumbu Y +/- 130 mm. Overhaul sumbu B tahun 2024 dengan biaya €20.000. Kodoyazwpjpfx Aa Nell

Kondisi: baik (bekas), Tahun pembuatan: 2019, jam operasional: 8.173 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 12.025 mm, diameter pembubutan: 480 mm, kecepatan spindel (min.): 3.250 rpm, jarak pergerakan sumbu X: 308 mm, jarak lintasan sumbu Y: 120 mm, jarak gerak sumbu Z: 1.240 mm, saluran batang: 102 mm, berat keseluruhan: 7.200 kg, model controller: DMG MORI SLIMline Multi-Touch Control, jenis kontrol: Kontrol CNC, en-GB: CLX 550 V6 2-axis universal lathe with driven tools incl. C-axis, Y-axis and counter spindle Standard equipment: 1. Ergonomic DMG MORI SLIMline operator panel 2. Main spindle A2-8 with AC motor, drive power 22 / 33 kW (100/40% duty cycle), 3,250 rpm 3. Counter spindle A2-6 with ISM 52 synchro, drive power 13 / 14 kW, torque 171.5/192 Nm (100/40% duty cycle), 5,000 rpm 4. 12-position servo turret VDI 40 mount with Trifix® precision interface and 12 driven tool stations, drive shaft according to DIN 5480 5. Y-axis ±60 mm 6. Chip tray 7. Hollow clamping device, max. bar capacity D 80 mm 8. Electronic handwheel Drive power (100%/40% duty cycle) 22/33 kW and hydraulic clamping device with bar feed, diameter 102 mm (extra charge) Differential pressure clamping for the main spindle Kedpfx Aasyazdpo Nsll Bar package & interface Option includes: - Workpiece removal device for parts up to D 80 x 200 mm (D 100 x 200 mm with Option C-B7000G), max. workpiece weight 4 kg - Interface for bar loader or bar loading device (DMG MORI standard interface) - Hinged belt chip conveyor instead of chip tray - 4-colour signal light We additionally recommend the double cartridge filter option for coolant, especially for production environments with very high chip volume. Automatic workpiece ejector Counter spindle with internal coolant supply for chuck flushing. Note: Option recommended for machines with workpiece removal device option. External clamping flush for counter spindle. Option recommended for machines with automation. Differential pressure clamping for counter spindle. Tailstock function for counter spindle, mechatronic control of tailstock force programmable (250-600 daN), incl. foot switch. Only for CLX 550 V6. Direct position measurement system X-, Y-axis. Note: Option only for machines in version V4 and V6. Manual tool measurement device in the working area, make: Marposs. Documentation according to the "Technical Documentation Parts List"—included in the machine price. Software option DXF import: conversion of DXF files to NC programs. SIEMENS CNC Tool monitoring system Easy Tool Monitor 1.0, monitoring per machining cut, with one monitoring limit. Simple learning function to determine the monitoring limit per tool per cut, manual adjustment/correction possible. Technology cycle – alternating speed (turning) Technology cycle: alternating speed for vibration-sensitive applications. Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and expert installation—all from a single source. Billing according to individual terms and period. Contact us for your personal offer.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 1.800 h, Fungsionalitas: berfungsi sepenuhnya, * Mori Seiki NL 2500 SY. * Included equipment value: €20,000 - €25,000. * Year of manufacture: 2008. * Only 1,800 cutting hours. * 5-axis machine. * Sub-spindle. * 12-station turret, all stations powered. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct drive for driven tools: 5.5 kW. * Starting torque: 640 Nm. * Beltless, gearless motors. * Main spindle nose: A2-8. * Sub-spindle nose: A2-6. * Bar capacity: 80 mm. * Main spindle chuck: Kitagawa B-210, 250 mm diameter, metric system. * Sub-spindle chuck: Kitagawa B-208, 210 mm diameter, metric system. * Box guideways on all axes. * Main spindle speed: 4,000 rpm. * Driven tool speed: 6,000 rpm. * Oil cooler for both spindles: Daikin. * Mapps 4 conversational automatic programming system. * Automatic load monitoring and tool consumption monitor. * Rapid traverse speed: 30 m/min on X and Z axes. * Turret indexing time: 0.2 sec. * Two Renishaw automatic tool measuring arms. * Communication ports: USB, PCMCIA card, RS 232. * Loader interface ready for bar feeder installation. * Automatic parts catcher. * Dual foot pedal for independent opening/closing of main and sub-spindle chucks. * Side chip conveyor (hinged type). * Extensive set of static and driven tool holders. * Electrical transformer. * Documentation: parts list, electrical schematics, programming and operation manuals. * Weight: 5,800 kg. * Machine currently in operation. * Precision videos should be checked. * Only used for prototyping of AOG (Aircraft On Ground) aluminum aeronautical components. Kedpfxeyaxmue Aa Noll * Immediate delivery, subject to prior sale.

Kondisi: bekas, Tahun pembuatan: 2002, bearbeitungszentrum-wemas-vz750-spezifikation Kljdpfxeyatyis Aa Nsl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, kecepatan spindel (maks.): 3.500 rpm, jarak pergerakan sumbu X: 400 mm, jarak gerak sumbu Z: 1.550 mm, tinggi total: 3.200 mm, berat keseluruhan: 22.000 kg, produsen pengendali: FANUC, model controller: 16i-TA, jumlah sumbu: 9, This 9-axis Nakamura-Tome STW-40 was manufactured in 2000 and features a maximum turning diameter of 570 mm and a turning length of up to 1550 mm. It offers spindle speeds up to 3,500 rpm and rapid traverse rates of 25 m/min on the X-axes and 30 m/min on the Z-axes. Designed for complex machining tasks, it is equipped with an 80-position tool magazine and a hinged belt chip conveyor. Contact us for more information about this machine. Additional Equipment • 12,000 rpm for upper tool spindle with 11/7.5 kW drive power and 79/47 Nm torque • 80-position tool magazine • Automatic machine start/stop with warm-up program function • Tool breakage monitoring with scanning flag for the upper tool spindle • 2 high-pressure Brinkmann pumps for the upper tool spindle and lower turret (pumping capacity = 45 liters per minute) • Hinged belt chip conveyor, right-side discharge Kodpfx Aajyaqpue Nell Machine Advantages Technical Features • Maximum turning diameter (upper tool spindle): 570 mm // Max. turning diameter (lower turret left/right): 400 mm • Standard turning diameter: 300 mm • Maximum turning length lower turret left/right: 500 mm • Maximum turning length upper tool spindle: 1550 mm • Distance between spindle noses: 1900 mm • Distance between two 3-jaw chucks: 1500 mm • Power requirement: total connected load of 160 kVA • Air consumption: approx. 500 liters per minute • C1 + C2: 400 rpm • B-axis: 12.5 rpm Additional Information Left/Right Spindle: Drive power and torque: 22/15 kW Torque: 500/794 Nm Spindle speed: 30–3,500 rpm Spindle nose: A1-8 Front bearing bore diameter: 130 mm Spindle bore: 85 mm Max. bar capacity: 71 mm Max. chuck size: 315 mm C-Axes 3-axis simultaneous: X, Z, C Indexing time: 0.5 sec Rapid traverse speed: 400 rpm (144,000 °/min) Feed rate: 1–4,800 °/min Indexing accuracy: 0.011° (30 arcseconds) Repeatability: ±0.006° (±20 arcseconds) Spindle disc brake torque: 25 kgfm Milling and B-axis drive for upper tool spindle: CAPTO-C6 Drive power: 15/11 kW from 800 rpm Motor speed: 60 to 6,000 rpm Tool sizes WeldonS: 10, 12, 14, 16, 20, 25 Collet chucks for tool holding: ER-25/ER-32 Dimensions Machine depth: 6,200 mm

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 88.040 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07400003691, diameter pembubutan: 120 mm, lubang spindel: 118 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, tinggi total: 2.500 mm, panjang total: 5.500 mm, lebar total: 2.500 mm, berat keseluruhan: 11.000 kg, produsen pengendali: SIEMENS, model controller: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Indicated spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Turning diameter: 270 mm - Distance between spindles: 900 mm - X1 travel: 290 mm - Z1 travel: 650 mm - X2 travel: 180 mm - Z2 travel: 650 mm - Y1 travel: ±40 mm - Z3 travel: 670 mm - X3 travel: 175 mm Kledpfxsyaqgyo Aa Njl - Max. bar diameter: 100/104 mm - Number of driven tools per turret: 12 - Including chip conveyor, with 2 tool turrets, each with 12 tool stations, main and counter spindles, as well as foot switches. Please note, the machine has the following defects: - The B-axis is defective (located on turret 1) - The guideways and drives show age-related wear - X2-axis (guide rails) runs slightly askew by approx. 0.03 mm (should be remeasured) - Occasionally, the referencing of the axes via the control system does not function properly - The hydraulic pump was replaced with a substitute unit after a failure, and is now located externally as a separate device FCA D-58256 Ennepetal, loaded onto truck on a date to be agreed upon at the end of February 2026.

Kondisi: baik (bekas), Tahun pembuatan: 2008, jam operasional: 72.899 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07510001241, panjang pembubutan: 1.185 mm, diameter pembubutan: 640 mm, kecepatan spindel (maks.): 12.000 rpm, berat benda kerja (maks.): 150 kg, tinggi total: 3.040 mm, panjang total: 7.800 mm, lebar total: 4.100 mm, berat keseluruhan: 16.500 kg, produsen pengendali: SIEMENS, model controller: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Indicated spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - Slide travel X1: 550 mm - Slide travel Y1: 180 mm - Slide travel Z1: 1,185 mm - Slide travel B1: 240° - Slide travel X2: 180 mm - Slide travel Z2: 1,050 mm - Slide travel Z3: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse (Slide 1 X/Y/Z): 40/24/70 m/min - Rapid traverse (Slide 2 X/Z): 24/36 m/min - Rapid traverse (Slide 3 Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 - Including tool holders mounted on the turret - Including bar feeder, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Attention, the machine has the following defects: - The hydraulic unit is faulty and needs to be repaired - The Q2 axis (tool changer milling spindle) fails frequently Kodpfx Ajyaqczsa Noll - X2 axis (guideways) moves slightly skewed - Guideways and drives are worn according to the age Note: A vehicle with a 3,000 mm transport width is required for transportation! FCA D-58256 Ennepetal, loaded on truck at a date to be agreed at the end of February 2026.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 20.695 h, jarak pergerakan sumbu X: 630 mm, jarak lintasan sumbu Y: 230 mm, jarak gerak sumbu Z: 1.585 mm, produsen pengendali: MAZATROL, model controller: Matrix, en Klsdpsyap Ucofx Aa Nsl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NTX26200913, panjang pembubutan: 1.530 mm, diameter pembubutan: 670 mm, kecepatan spindel (maks.): 12.000 rpm, jarak pergerakan sumbu X: 675 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 40 mm, kecepatan rotasi (maks.): 4.000 rpm, jumlah slot dalam magazin alat: 76, Simultaneous 5-axis machining with Direct Drive Motor (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with an extremely short construction length of 350 mm Machining option: Complete 6-sided machining thanks to a high-performance counter spindle TECHNICAL DETAILS X1 axis travel: 675 mm (+550 / -125 mm) Y1 axis travel: 300 mm (+/-150 mm) Y2 axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: Standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Counter spindle chuck: KITAGAWA 10" hollow chuck BB210A821 Safety: Double foot switch with protective guard for main and counter spindle Stroke monitoring: Automatic stroke monitoring of the clamping cylinder for main and counter spindle Turn-mill spindle Spindle (B axis): Standard speed 12,000 rpm (FANUC) Tool interface: Capto C6 Positioning: B axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for bolt-mounted tool holders Milling capacity: 6,000 rpm, 40 Nm (Turret 2, FANUC) Tool magazine Capacity: 76 tools Tool interface: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Measuring system: Direct measuring system in X, Y, and Z axes of the turn-mill spindle Sensor system: Spindle sensor measuring system with wireless signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feeder (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Coolant and chip disposal Chip conveyor: Discharge to the right, hinge belt + drum filter Coolant: Use of water-soluble cutting fluids (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through-spindle for tool spindle and lower turret Filtration system: Knoll/Interlit Compressed air system Blow-off system: For chucks on main and counter spindle Oil mist extraction system Oil mist separator: Extraction port Ø 200 mm, AFS 1600 Kedpfeyap Shjx Aa Nsll Filter and cooling system Filtration system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for Turret II with lifting pump (FANUC/MITSUBISHI) Chiller: INTERLIT auxiliary chiller, 15 kW

Kondisi: baik (bekas), Tahun pembuatan: 2023, Spinner TC 600, tahun pembuatan 2023, kontrol Fanuc 32 i TB, perjalanan X/Z 275/700 mm, konveyor serbuk, tailstock, revolver 16 posisi, VDI 40, sumbu C, alat pemotong bertenaga, chuck tiga rahang Ø 250 mm. Ksdpfxeyap H Se Aa Noll

Kondisi: baik (bekas), Tahun pembuatan: 2008, Spinner TC 65, tahun pembuatan 2008, kontrol Fanuc 21 iTB, jarak gerak X/Z 230/740 mm, tailstock, langkah pinol 120 mm, kecepatan spindle hingga 4.500 rpm, revolver 12 posisi, semua stasiun bertenaga, poros C, VDI 30, tailstock, chuck tiga rahang, kapasitas batang hingga 65 mm, Klodpfx Asyapzisa Njl

Kondisi: baik (bekas), Tahun pembuatan: 2005, Spinner Tc 65 MC, tahun pembuatan 2005, kontrol Fanuc, perjalanan X/Z 230/740 mm, revolver 12 posisi, poros C, alat penggerak, senter tetap, konveyor serpihan, penangkap bagian, post-prosesor, lengan ukur alat. Klodpeyapitjfx Aa Nel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 35.000 h, Fungsionalitas: berfungsi sepenuhnya, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X 5-axis simultaneous machining Max. turning diameter: 658 mm Max. turning length: 1,519 mm Travels: X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis: -30 to 210° Rapid traverse (X/Y/Z/W): 50/40/50/30 m/min Main spindle: Drive power: 30 kW Max. spindle speed: 4,000 rpm C-axis Max. bar capacity: 80 mm Sub spindle: Drive power: 26 kW Max. spindle speed: 4,000 rpm C-axis Milling spindle: Drive power: 24 kW (oil-air lubrication) Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 72 tool stations Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 12 kg Special equipment: Mayfran Consep 2000 II chip conveyor, double change filter Preparation for high-pressure coolant system (IKZ) 70 bar 70 bar high-pressure pump, 7 pressure stages Air blowing device on upper turret Interface for bar loader Automatic parts catcher (D:80 x L:150 x 5 kg) Gear hobbing Synchronized thread cutting with milling spindle Constant rapid traverse angle during movement Thread re-cutting function Turning/milling function under Mazatrol 5-axis machining package for SmoothX -EIA/ISO 5-axis simultaneous machining -F) Tool tip control for 5-axis simultaneous machining -Spline fine interpolation -5-axis spline interpolation Sub spindle with C-axis incl. synchronization C1+C2 Prepared for multiple and flash tool tool holders Dimensions / Weight: Dimensions (LxWxH): 4,910 x 2,800 x 2,720 mm Weight: 16,900 kg General machine options: Klodpfeyam D Usx Aa Nol B-axis 0.0001° Main spindle C-axis positioning accuracy 0.0001° Sub spindle positioning without C-axis positioning accuracy 0.001° Absolute positioning system (linear axes) Work area lighting Operator door with interlock switch CE conformity Double footswitches for main and sub spindle Separate controls for opening/closing the chucks Hydraulic pressure interlock Fully enclosed work area Automatic opening/closing of main and sub spindle chuck jaws Chuck status feedback for main and sub spindle Chuck status feedback via sensors Tooleye for upper and lower turret Lead error correction input X, Y, Z Standard tool set (lower turret)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, produsen pengendali: MAZATROL, model controller: Matrix, This 5-axis Mazak Integrex 100 IV ST was manufactured in 2011. It is equipped with a main spindle featuring a 6-inch hydraulic chuck, a maximum speed of 4,000 rpm, and a power output of 30 kW. The secondary spindle matches these specifications. Its milling spindle can reach up to 20,000 rpm. The machine comes with a high-speed ATC offering a capacity of 20 tools, expandable to 120. With its robust construction and the MAZATROL MATRIX CNC control, it is ideal for single-setup machining operations. For more information about this machine, please contact us. Machine Advantages Qualitative Advantages • 2 units are available Technical Advantages • Chuck type: 6" hydraulic chuck with bar capacity max / spindle speed: 4,000 rpm max / power: 30 kW / 22 kW continuous / max torque: 500 Nm / spindle nose: A2-8 / acceleration time: 5.1 seconds • Type: 6" hydraulic chuck, max. speed: 4,000 rpm, max. power: 26 kW / 22 kW continuous / max. torque: 724 Nm / spindle nose: A2-8 / acceleration time: 2.7 seconds • Max. speed: up to 20,000 rpm (optional) / max. power: 18.5 kW / max. torque: 119 Nm / taper type: KM63, Capto C6, BT40 • X-axis: 410 mm / Y-axis: ±70 mm (total 140 mm) / Z-axis: 805 mm / B-axis (milling head): 210° rotation / C-axis (spindle): 0.0001° resolution (full contouring) Ksdpfx Aaoyalpis Noll • Maximum turning diameter: approx. ø545 mm / maximum turning length: approx. 600 mm • Tool capacity: 20 tools standard, expandable to 120 / changer type: high-speed, cam-driven system • Heavy-duty construction with linear guides, "Done in One" multitasking concept for single-setup machining / CNC control: Mazatrol Matrix with 3D simulation / intelligent thermal shield for automatic thermal compensation

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, daya motor spindle: 26.000 W, jarak pergerakan sumbu X: 100 mm, berat keseluruhan: 6.900 kg, produsen pengendali: FANUC, model controller: FANUC 18i-TB, jumlah sumbu: 8, This 8-axis Biglia B470 YSM was manufactured in 2007. It is a robust turning and milling center featuring two spindles, each offering considerable power (main spindle 26 kW, sub-spindle 11 kW) and a maximum spindle speed of 3200 rpm. The machine is equipped with a FANUC 18i-TB CNC control, two turrets with 12 positions each for driven tools, and a bar feeder to enhance productivity. If you are looking for a high-quality turning lathe, consider the Biglia B470 YSM machine we have for sale. Contact us for further information. Additional Equipment • Chip conveyor: Yes (belt type) • Parts catcher + outfeed conveyor: Yes • Bar feeder: Iemca Master 880 MP 33L (year 2019) Machine Advantages Technical Machine Advantages • Max. turning length: 320 mm • Max. turning diameter: 240 mm • Max. bar capacity: 80 mm • Turrets: 2 × 12-station, all driven tool positions Klsdsyalmnjpfx Aa Nsl • Tool size: 20×20 mm (turning), Ø32 mm (drilling) • Driven tool speed: 4000 rpm • Driven tool motor power: 3.7 kW Additional Information Machine still under power

Kondisi: baik (bekas), Tahun pembuatan: 1990, Johnford 5 VH Milling machine by Johnford with Fagor digital readout, year of manufacture 1990, in good condition CE-compliant!! Technical Specifications: Year of manufacture: 1990 Working area Clamping table surface: 1370mm x 250mm Maximum table load: 350 kg Travel paths X-axis travel: 800mm Y-axis travel: 390mm Kledsyalc Aspfx Aa Nel Z-axis travel: 380mm Vertical milling head Spindle speed (vertical): 70 rpm - 3,600 rpm Spindle taper: SK40 DIN 2080 Quill stroke: 127 mm Feed Quill feeds (3): 0.04; 0.08; 0.15 mm/rev Drive power Main drive motor power: 3.75 kW Dimensions and weights Dimensions (L x W x H): 2.54 m x 2.16 m x 2.24 m Weight: 1,590 kg About the machine: This versatile, multipurpose milling machine combines all the advantages of the world’s best-selling milling machine with enhanced stability. It belongs to the category of conventional milling machines and stands out as the top model of the 5 VH series with an SK 40 tool holder and 30% higher net weight. The X and Y axes are equipped with infinitely variable feed units. The swivelling vertical milling head provides a wide speed range for machining steel and non-ferrous metals. Standard features include a four-stage automatic quill feed, pneumatic tool clamping, as well as a large clamping table for workpieces and fixtures. You can find additional milling machines from well-known manufacturers on our website.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, tinggi total: 2.050 mm, berat keseluruhan: 4.000 kg, produsen pengendali: INDEX, model controller: C200-4 / C200-8, This 5-axis turning and milling center Index G200 C was manufactured in 2000. Take advantage of the opportunity to purchase this Index G200 C turning-milling center. Please contact us for further information. Additional Equipment • Synchronization device for counter-spindle machining • Tool carrier 3 for sub-spindle (backside machining) • Additional milling spindle • Threading and polygon turning device • Tool changer without gripper (6 tools, HKS-50 B, KM40) • Workpiece handling unit WHU100 Machine Benefits Technical Machine Advantages • Footprint (without bar feeder): 3580 x 3108 mm • Control unit: resolution: 0.001 mm (input/output/correction) • Extensive range of motion with multi-axis configuration • High precision with 0.001 mm resolution in numerical control • Versatile expansion options and additional equipment for increased functionality Additional Information Movement Kodpfx Asyailzoa Nell Cross slide 1 (upper) - XYZB axes: X-axis: Travel 155 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Y-axis: Travel 120 mm, Feed force 10000 N, Rapid traverse 7.5 m/min, Resolution 0.0005 mm Z-axis: Travel 590 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm B-axis (rotary): 360° swivel range, angular steps 5° (with lock), resolution 0.001° (locked), switching time for 180°: 1 s Cross slide 2 (lower) - XZ axes: X-axis: Travel 105 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Z-axis: Travel 307 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm Turret Right turret: X-axis: Travel 120 mm Z-axis: Slide travel 400 mm Tailstock Center distance: 400 mm Max pressure force: 5500 N Drive: Hydraulic or electric Media: Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Fill volume: 70 liters Coolant system: Pump output (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Fill volume: approx. 230 liters Chip conveyor: hinge belt or scraper Workpiece holder: Main spindle: DB5 internal chucking / D140 external chucking, optional short taper Sub-spindle: D140 external chucking (only pull force for collet and chuck permitted) 1st Spindle Data (main/sub-spindle): Spindle bore (collet clamping): Options: 30 mm / 42 mm / 60 mm / 65 mm Spindle diameter at front bearing: 75 mm (with 30 mm bore) / 85 mm (42 mm) / 100 mm (60 + 65 mm) Max speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Machining diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine depth 3580 mm