Eterix Sweden AB

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), Kompleks sistem pengelasan lengkap dengan robot dan perangkat periferal tersedia. Tempat las: 2, lintasan gerak robot: 11.000 mm, diameter benda kerja maks. kiri/kanan: 2.200 mm, panjang benda kerja maks. kiri: 4.000 mm, rentang panjang benda kerja kanan: 1.000–5.000 mm, proses pengelasan: TIG, material: aluminium/baja tahan karat, gas pelindung: argon, dimensi keseluruhan sistem (X/Y/Z): sekitar 15.350 mm/5.700 mm/4.000 mm, kontrol: Qirox QC2 Advanced. Termasuk sistem ekstraksi asap. Dokumentasi tersedia. Kunjungan di lokasi dimungkinkan. Hfjdpoxnz Upefx Adqjn

Kondisi: bekas, de Hfjdpfx Asxnxyvsdqsn

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), 01 Hsdpfoxl Uphsx Adqefn

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Daya laser: 4000W (4kW), panjang gelombang: 1030nm, kualitas sinar (BPP): 8mm/mrad, pengaturan diameter sinar: 0,1µm, dimensi mesin X/Y/Z: kira-kira 1000mm/1600mm/1600mm, berat: kira-kira 1000kg. Dokumentasi tersedia. Pemeriksaan di lokasi dimungkinkan. Hodsxltuiopfx Adqjfn

Kondisi: siap digunakan (bekas), de-hu-001 Hjdpfxoxhntxj Adqefn

Kondisi: bekas, temperatur-max-1150-grad-heraeus-ofen-beschreibung Hfsdpfexg R Ivsx Adqjn

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Tersedia meja putar pengelasan Deuzer Maschinen & Automationstechnik. Rentang titik berat beban: 200mm-1400mm, torsi maksimum pelat meja: 10000Nm, kapasitas beban maksimum: 10000kg, kapasitas maksimum pada titik berat tertinggi (1400mm): 2000kg. Pemeriksaan di lokasi memungkinkan. Hfsdpfx Adjxfbcueqon

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), de-hu-001 Hfedpfxexdc U As Adqjn

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), A nearly new plasma cutter is available. Operating hours: 30h. Open-circuit voltage (U₀): approx. 292V. Output current (I): 105A at 30A/ 92V–105A/ 122V (at 92 or 122V, below 30A). Output voltage under load (nominal) HYP U₂/ IEC U₂: ~160V (at 100% power)/ ~142–160V depending on standard. Duty cycle at 30°C: at 80% power 105A (at X 40°C), at 100% 94A or other voltages. Supply voltage/input: Three-phase (3-PH), multiple voltages possible, 380–400V etc., U1 50/60 Hz. Protection class: IP23CS. Standards: EN60974-1, EN60974-10 Class A, GOST etc. Power consumption (P1): 14.9kW/h (~14.9kW). Duty cycle at 40°C: 80% at 105A (at certain voltages); 100% at slightly reduced currents (e.g. ~94A) at high voltages; other combinations depending on voltage/standard. Length with handles: 592mm, width: 274mm, height: 508mm. Weight with torch (7.6m cable): 45kg. Optional: table with sheet metal clamp, collection tray, and rail guide for the plasma cutter available. On-site inspection is possible. Hfsdpfoxddaaox Adqsn

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), 20 identical welding machines available. Model: cool41 U31, Standard: IEC 60974-1, -2, -10 C.L.A, Mains voltage: 400V, Frequency: 50/60Hz, Protection class: IP23, Power input P min: 0.9kW, Cooling capacity P max: 0.35MPa (3.5bar), Max. current consumption: 2.5A, Length: 539mm, Width: 210mm, Height: 415mm, Weight: 22kg. Control system: Comfort 2.0 with intuitive operation via click-wheel. Pulse, spot, and normal modes continuously adjustable (especially for TIG welding), adjustable pulse pause ratio (balance), e.g. from 10-90%, Hz and kHz pulsing up to approximately 15 kHz. ActivArc technology: dynamic arc control ensures consistent performance even with variations in torch distance and prevents electrode sticking, improved root and penetration quality. spotArc/Spotmatic functions for spot welding/tacking. 2-stroke/4-stroke modes selectable via torch trigger. Integrated manual electrode welding (often with stick pulse automation). Adjustable pre-flow and post-flow gas times; upslope/downslope time also controllable; torch modes accessible via torch button (e.g. reduced secondary current, etc.). Memory/JOB storage: Recurring welding tasks can be stored (depending on version, approx. 8-100 JOBs). Energy efficiency: high efficiency, standby function included. Remote control & interfaces: foot pedals, function torches connectable, optional LAN/WiFi gateway (ewm Xnet), PC interfaces for parameter setting and monitoring. Very little used, on-site inspection possible. Hfedsxdc Upspfx Adqen

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Both a Rehm Invertig Pro 350 AC/DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3-350A Output voltage U₂ (at max current): approx. 24V No-load voltage U₀: approx. 91V Duty cycle: 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S Insulation class: S Adjustment range: 3-350A in TIG for this AC/DC version Duty cycle: 100% at 40°C, 350A in TIG, 100% duty cycle Input fuse: 32A at 3x400V for 350 AC/DC version Dimensions (LxWxH): 520mm x 360mm x 460mm Weight: 29.5kg for the AC/DC version 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Hsdpexddamefx Adqjfn Welding current range (TIG): 3-450A Output voltage U₂ at max current: approx. 28V No-load voltage U₀: approx. 91V Duty cycle: 100% at 450A TIG; lower for electrode welding (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100%: 450A (TIG) at 40°C Electrode welding (MMA) current: approx. 360A at 100% duty cycle for electrode operation on the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions (LxWxH): 520mm x 360mm x 460mm Weight: approx. 28kg On-site inspection is possible.

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), Five identical welding machines available. Mains voltage: 400V (50/60Hz), Fuse: 25A, Power consumption: 22kVA, Power factor cos φ: 0.8, Adjustment range: 40–400A, Operating voltage: 16–34V, Open-circuit voltage: 19–55V, Voltage steps: 2x12, Duty cycle (at 40°C): 60% at 360A/32V, 100% at 250A/26.5V, Protection class: IP23, Insulation class: H (180°C), Cooling type: F, Weight (gas-cooled): 153kg, (water-cooled): 161kg. Dimensions (LxWxH): 1040mm x 460mm x 935mm. Features: two coarse adjustment steps, twelve fine adjustment steps, high-performance 4-roller wire feeder (140W), wire feed speed: 0.5–24m/min, wire diameter: 0.8–1.6mm, two choke outputs for adaptation to the welding task, MC 15 control as a compact, easily replaceable control box, functions: constant wire feed speed control, wire creep start, burn-back time, 2/4-stroke operation, wire inching (without current and gas), low-noise fan (thermostat-controlled on gas-cooled models), thermal overload protection, central connection socket for welding torch. On-site inspection is possible. Hfedpfxsxdda He Adqsn

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), trad-001 Hedpjxdda Tjfx Adqefn

Tahun pembuatan: 2020, Kondisi: seperti baru (mesin pameran), Daten Hsdexcuwgopfx Adqefn

Kondisi: bekas, Ukuran rangka: 4100 x 2520 mm Ukuran kabin: 3000 x 2520 x 2500 mm tinggi + cerobong: 600 mm Hsdpfjxct Ansx Adqsfn

Kondisi: bekas, Ukuran rangka: 4100 x 2520 mm Hfjdpfx Ajxctwlsdqen Ukuran kabin: 3000 x 2520 x 2500 mm tinggi + cerobong: 600 mm

Kondisi: bekas, Gergaji besi Merek: OHLER Tipe: K 400 Listrik: 400 Volt Diameter maksimum mata gergaji: 400 mm Hfsdpfxsxb Nxvo Adqsn Penjepitan hidrolik Berat bersih mesin gergaji: sekitar 1200 kg Video mesin gergaji dapat dikirim melalui WhatsApp ke nomor telepon jika berminat! Kepala gergaji bergerak secara hidrolik, naik & turun otomatis!

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Daya laser: 4kW, area kerja X/Y/Z: 4000mm/2000mm/115mm, ketebalan maksimum pelat baja/stainless/aluminium: 20mm/15mm/10mm, berat benda kerja maksimum: 1700kg. Dimensi mesin X/Y/Z: sekitar 11600mm/5300mm/2200mm, berat: sekitar 15000kg. Termasuk Trumpf Liftmaster. Dokumentasi tersedia. Inspeksi di lokasi dimungkinkan. Hedpoxbhgxsfx Adqsfn

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Sangat baik, hampir tidak digunakan Hodpfx Ajxbft Nsdqefn

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, nomor mesin/kendaraan: L4211M3217, daya laser: 5.000 W, panjang gelombang laser: 1.030 nm, lebar benda kerja (maks.): 400 mm, tinggi benda kerja (maks.): 400 mm, The system consists of two identical laser welding units. The following components are included in the package: - Trumpf TruDisk 5001 laser source (laser source for both machines) - Trumpf 12-12-30-A32/11 disc laser with focusing optics (PFO) - PRIMES FocusParameterMonitor (FPM) for laser measurement and determination - RITTAL SK 3185830 control cabinet cooling - HERDING Comp 1500-8/9 SB welding fume extraction unit - HERDING Multicoater_MCI 55/1 dosing unit (for the addition of additives in the filtration process) The system was previously used for the production of Li-ion batteries (E-Smart). In this application, cell conductors for serial connection in cell blocks were welded. The cycle time for cell blocks in this production was 3-4 minutes. The system was professionally dismantled in March 2025. TECHNICAL DETAILS - Workpiece height: 40 cm - Workpiece width: 40 cm Hedpfxjxazzms Adqefn - Extraction volume welding fume extraction: 2,000 m³/h Trumpf TruDisk 5001 - Laser power at the workpiece: 5,000 W - Continuously adjustable power range: 120 W - 5,000 W with active power control - Wavelength: 1,030 nm - Minimum fiber diameter: 100 µm MACHINE DETAILS - Weight per system: 6,021 kg - Weight of Trumpf TruDisk 5001: approx. 900 kg - Weight of cooler: approx. 300 - 400 kg - Rated current: 20 A - Connected load: 12 kVA

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), 1 Hsdpfxjxaph Us Adqsfn

Kondisi: baik (bekas), translation-001 Hfjdpfxjxamyhs Adqen

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), translate_001 Hfedpow U T Upofx Adqen

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Pistol: PH-3N, tegangan: 400V, berat: 50kg. Dengan buku panduan, 2x kabel ground dengan penjepit BMS/BMK, sambungan gas, penahan baut HZ, adaptor, dan kunci. Inspeksi di lokasi memungkinkan. Hsdpsw Tl I Eofx Adqofn

Kondisi: bekas, Tahun pembuatan: 1971, daya nominal pada siklus kerja 50%: 100 kVA, 1 Hsdpfxow S Exuj Adqefn