M.S. Metall-&Schweißtechnik
M.S. Metall-&Schweißtechnik dari Lemgo
Metallbearbeitung
Tuan Marcel Stute
Großer Schratweg 42
32657 Lemgo
Jerman
Nordrhein-Westfalen
Penawaran terbaru dari dealer serupa
Klik keluar
Italia
11.016 km
Pusat Pemesinan Horisontal Pallet Kembar
DoosanDaewoo Ace-VC500
DoosanDaewoo Ace-VC500
Kondisi: bekas, Tahun pembuatan: 2006, Doosan Daewoo Ace-VC500 Twin Pallet Horizontal Machining Centre dengan Kontrol CNC Fanuc Series 21i-MB (2006)
Duedpezcnb Hofx Airju
Catatan: Unit ini berlokasi di Italia. Semua/perlengkapan alat hanya ditawarkan sesuai dengan deskripsi spesifik.
Iklan kecil
Jerman
11.248 km
FANUC Robodrill alpha-T21iFL
FANUCROBODRILL Alpha-T21iFL
FANUCROBODRILL Alpha-T21iFL
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 10.294 h, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 330 mm, produsen pengendali: FANUC, model controller: 31i-A5, tinggi total: 2.336 mm, lebar total: 1.565 mm, lebar meja: 400 mm, panjang meja: 650 mm, beban meja: 300 kg, berat keseluruhan: 2.000 kg, kecepatan spindel (maks.): 10.000 rpm, daya motor spindle: 5.500 W, jumlah slot dalam magazin alat: 21, berat alat: 2.000 g, panjang produk (maks.): 2.027 mm, jumlah sumbu: 3, This 3-axis FANUC ROBODRILL Alpha-T21iFL was manufactured in 2008. It features an X-axis travel of 700 mm, a Y-axis travel of 400 mm, and a Z-axis travel of 330 mm. The machine offers a rapid traverse rate of 54,000 mm/min and a spindle speed of 10,000 rpm. If you are looking for high-quality drilling, tapping, and milling capabilities, you should consider the FANUC ROBODRILL Alpha-T21iFL vertical machining center that we have for sale. Contact us for further details.
• Control model: FANUC 31i-A5
• Table T-slots: 3
• T-slot size: 14 mm
• T-slot pitch: 125 mm
• Distance from table to spindle nose: 250 - 580 mm
• Rapid traverse rate: 54,000 mm/min
• Feed rate: 1 - 30,000 mm/min
• Acceleration: 1.5 G
• Continuous spindle power: 3.7 kW
• Spindle taper: BBT30 Big Plus
• Tool holder: BT30
• Tool magazine capacity: 21
• Maximum tool length: 250 mm
• Tool change time: 1.6 sec
• Positioning accuracy: 0.006 mm / 300 mm
• Repeatability: ±0.002 mm
• Memory capacity: 512 KB
• Display size: 10.4 inches
• Signal lamp
Dsdpfx Aezb Iq Sjirsuu
• Coolant tank capacity: 200 L
• Power supply: 400 V / 50 Hz
• Required air pressure: 0.35 - 0.5 MPa
• On time: 24,133 h
• Operating hours: 10,294 h
• Application: High-speed drilling, tapping, and milling of precision components
Lelang
Berakhir dalam
d
h
min
s
Lelang telah berakhir
Baden-Württemberg
11.115 km
Pusat pemesinan vertikal
MAZAKVTC 30 C
MAZAKVTC 30 C
Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.660 mm, jarak lintasan sumbu Y: 760 mm, jarak gerak sumbu Z: 660 mm, beban meja: 1.200 kg, kecepatan rotasi (maks.): 8.000 rpm, de_to_hu_it_lt_001
Dujdpfx Aezb D N Reirou
Iklan kecil
Amerika Serikat
11.248 km
HAAS VF-2YT
HAASVF-2YT
HAASVF-2YT
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 508 mm, berat keseluruhan: 3.500 kg, kecepatan spindel (maks.): 8.100 rpm, jumlah sumbu: 3, This 3-axis HAAS VF-2YT was manufactured in 2015. It features an X-axis travel of 762 mm, a Y-axis travel of 508 mm, and a Z-axis travel of 508 mm. The machine has a table size of 914 x 457 mm and a spindle speed of 8,100 rpm. If you are looking for high-quality machining capabilities, you should consider the HAAS VF-2YT vertical machining center we have available for sale. Contact us for further details.
• Table size: 36" × 18" (914 × 457 mm)
• Spindle taper: CT40
• Spindle motor: 30 HP
• Tool changer: 40 ATC
• Rapid traverse (X/Y/Z): 1000 ipm
• Prepared: 4th-axis drive pre-wired; ready for 4th/5th axis integration
• Remarks: Optional direct-drive spindle and high-torque gearbox are available as options (to be confirmed if included in the scope of delivery)
Additional Equipment
• Through-spindle high-pressure coolant (1000 psi)
Djdpfxjza Umke Airjuu
• High-pressure flood coolant
• Multi-auger chip removal system
• 95-gallon coolant tank
Iklan kecil
Mühlhausen/Thüringen
11.019 km
Pusat pemesinan vertikal
WemasTurn 400 T1Y1
WemasTurn 400 T1Y1
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 037611, Perlengkapan: dokumentasi / manual, konveyor serpihan, de|1
Duodpfezav H Eox Airsu
Iklan kecil
Mögglingen
11.103 km
Pusat pemesinan vertikal
WEMASBZ 750
WEMASBZ 750
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Heidenhain TNC 620 control unit
Travel X/Y/Z: 700/500/500 mm
Duedpozatnajfx Aireu
Spindle speed: 12,000 rpm
Coolant through spindle (CTS): 30 bar
Belt filter system
Touch probe
Tool magazine for 30 tools, SK 40
Chip conveyor
Iklan kecil
De Lutte
11.231 km
Pusat pemesinan vertikal
HaasMini Mill 2
HaasMini Mill 2
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1110809, EN-HAAS-Minimill2-2014-CNC-Machineseeker-Listing
Duedpfxozai T So Aireu
Iklan kecil
Polandia
11.248 km
HAAS VF-2
HAASVF-2
HAASVF-2
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 5.557 h, jarak pergerakan sumbu X: 706 mm, jarak lintasan sumbu Y: 406 mm, jarak gerak sumbu Z: 508 mm, produsen pengendali: HAAS, lebar meja: 914 mm, panjang meja: 356 mm, beban meja: 1.361 kg, kecepatan spindel (maks.): 8.100 rpm, jumlah sumbu: 3, HAAS VF-2, tahun pembuatan 2008, menawarkan kinerja pemesinan tinggi dengan pergerakan sumbu X 706 mm, sumbu Y 406 mm, dan sumbu Z 508 mm. Dilengkapi dengan kecepatan spindle 8100 rpm dan motor spindle bertenaga 22,4 kW, mesin ini sangat cocok untuk aplikasi milling berat. Kondisi optik dan teknis mesin sangat baik untuk usianya. Hubungi kami untuk informasi lebih lanjut.
• Meja: 356 x 914 mm
• Kapasitas magazin alat: 20 alat
Perlengkapan tambahan
• Konveyor serbuk (chip conveyor)
• Dokumentasi / Manual pengoperasian
Djdpfozaam Nsx Airsuu
Iklan kecil
Székesfehérvár
10.494 km
Pusat pemesinan vertikal
HURCOVMX30t
HURCOVMX30t
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2008, jam operasional: 11.870 h, Fungsionalitas: berfungsi sepenuhnya, WINMAX DSM control (dua layar)
Dimensi meja: 1020 x 510 mm
Beban maksimum meja: 1350 kg
Perjalanan X: 762 mm
Perjalanan Y: 510 mm
Perjalanan Z: 610 mm
Sumbu A: -35/+110 derajat
Sumbu C: 0 - 360 derajat
Kecepatan putar: 12.000 rpm
Koneksi: SK40
Daya penggerak: 11/15 kW
Berat: 4900 kg
Dimensi P x L x T = 2300 x 2400 x 2600 mm
Perlengkapan dan fitur:
- KITAGAWA TT251 NC meja putar
- Sistem pendingin cairan
- Pendingin tekanan tinggi 20 bar
- Pendingin spindle
- RENISHAW pengukuran titik nol
- Konveyor serbuk
- Opsi perangkat lunak: 3D, DXF, kantong dengan pulau, pemotongan ulir sinkron, NCPP, ISNC, simulasi realistis, basis data alat & material, dsb.
Djdpfoy U Hvhjx Airsuu
- Kaki mesin
- Unit hidrolik
Mesin masih terhubung listrik dan dapat diperiksa kapan saja.
Iklan kecil
Toruń
10.439 km
Pusat pemesinan vertikal
ChironFZ 15W MAGNUM High Speed Twin Pal
ChironFZ 15W MAGNUM High Speed Twin Pal
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 730 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 360 mm, gerak cepat sumbu X: 75 m/menit, Perpindahan sumbu
X = 730 mm
Y = 400 mm
Z = 360 mm
Dodey U Hp Ispfx Airjuu
Kecepatan rapid traverse 75 m/menit
Kecepatan spindle maksimum 12.000 rpm (motor 15 kW)
Waktu pergantian alat 2,5 detik (chip to chip)
No. seri 139-26 (2009)
Mesin dalam kondisi baik. Pemuatan termasuk dalam harga. Parameter teknis dasar di bawah ini. Kontrol Siemens. Mesin menggunakan 2 palet.
Iklan kecil
Italia
11.248 km
Okuma ACE CENTER MF-46VA
OkumaACE CENTER MF-46VA
OkumaACE CENTER MF-46VA
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 460 mm, jarak gerak sumbu Z: 460 mm, tinggi total: 3.000 mm, lebar total: 3.270 mm, beban meja: 400 kg, berat keseluruhan: 8.000 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 22.000 W, jumlah slot dalam magazin alat: 32, berat alat: 8.000 g, panjang produk (maks.): 300 mm, jumlah sumbu: 3, This 3-axis Okuma ACE CENTER MF-46VA was manufactured in 2006. It features an X-axis travel of 762 mm, a Y-axis travel of 460 mm, and a Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 15,000 rpm and an automatic tool changer with 32 stations. If you are looking for high-quality machining capabilities, you should consider the Okuma ACE CENTER MF-46VA vertical machining center, which we are offering for sale. Contact us for further details.
• Distance table to spindle nose: 180–640 mm
• Rapid traverse (X/Y): 40 m/min
• Rapid traverse (Z): 32 m/min
• Maximum cutting feedrate: 32,000 mm/min
• Positioning accuracy (X/Y/Z): ±0.004 mm (JIS)
• Repeatability (X/Y/Z): ±0.0015 mm (JIS)
• Pallet changer: 2 pallets, rotary automatic pallet changer
• Pallet size: 760 × 460 mm
• T-slots for pallets: 3 × 18 mm, 125 mm spacing
• Pallet change time: 6.0 s
• Spindle speed: 15,000 rpm (upgrade from 8,000 rpm)
• Spindle motor power: 22 / 18.5 kW
• Maximum spindle torque: 199 Nm
• Thermal compensation: TAS-S (spindle) and TAS-C (structure)
• ATC capacity: 32 tools (upgrade from 20), random management
• Tool change time (adjacent): 1.2 s
• Maximum tool diameter: 90 mm (125 mm if adjacent pockets are empty)
• Maximum tool length: 300 mm
• CNC functions: Hi-2-NC with NURBS, Super-Hi-2-NC profile management, synchronized rigid tapping, angular cutting, spindle load monitoring, IGF plain-language programming, RS-232-C interface, 3.5" disk drive
• 4th axis capability: prepared for 4th axis integration
Dsdpsy Uxuiofx Aireuu
• Documentation: operator manuals and CE declaration of conformity included
Additional Equipment
• Tool breakage detection sensor (table-mounted)
• Prepared for Renishaw workpiece zero-point probe (probe not included)
• 'Coolant wash system for the work area in the form of a shower'
• Belt-type oil skimmer at the coolant tank
Technical Specification
Taper Size BT 40
Iklan kecil
Courbevoie
11.649 km
Pusat pemesinan vertikal
Toppertmv760A
Toppertmv760A
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 510 mm, berat keseluruhan: 3.800 kg, fanuc 18M
Spindle BT 40 8000 rpm
24-tool changer
Travels: 760x450x510mm
Table: 800x480mm
Chip conveyor
Dedpoy Uvidjfx Aireuu
Weight: 3800kg
Iklan kecil
Belanda
11.248 km
DOOSAN DNM 400 II
DOOSANDNM 400 II
DOOSANDNM 400 II
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 435 mm, jarak gerak sumbu Z: 510 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 828D, beban meja: 600 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 18.500 W, jumlah slot dalam magazin alat: 30, berat alat: 8.000 g, jumlah sumbu: 3, en-GB
Djdpfxsy T I Sno Airjuu
Iklan kecil
Courbevoie
11.649 km
Pusat pemesinan vertikal
HURCOBMC2412
HURCOBMC2412
Hubungi
Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 610 mm, jarak lintasan sumbu Y: 405 mm, jarak gerak sumbu Z: 510 mm, berat keseluruhan: 4.000 kg, kecepatan spindel (maks.): 8.000 rpm, commande-ultimax-vmc
Dusdoy T Ekbjpfx Airsu
Iklan kecil
Contamine-sur-Arve
11.428 km
Pusat pemesinan vertikal
DOOSANVC 510
DOOSANVC 510
Hubungi
Kondisi: bekas, en
Duedpfxey Tzcyj Airsu
Iklan kecil
Contamine-sur-Arve
11.428 km
Pusat pemesinan vertikal
HURCOVMX 30 UHSI
HURCOVMX 30 UHSI
Hubungi
Kondisi: bekas, de2en
Duodpfx Aoy Tzcteirju
Iklan kecil
Trittau
10.978 km
Pusat permesinan - vertikal
FEHLMANNPICOMAX 90-HSC
FEHLMANNPICOMAX 90-HSC
Hubungi
Kondisi: bekas, Tahun pembuatan: 2008, de-to-hu_01
Dusdey Ty Izopfx Airsu
Iklan kecil
Castellbisbal
11.888 km
Pusat pemesinan vertikal
FANUCROBODRILL α-D21LiB5
FANUCROBODRILL α-D21LiB5
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 330 mm, produsen pengendali: FANUC, model controller: 31iB5, lebar meja: 410 mm, panjang meja: 850 mm, jumlah slot dalam magazin alat: 21, Perlengkapan: dokumentasi / manual, PUSAT PEMACHINAN FANUC ROBODRILL ALPHA D21LiB5 TAHUN PEMBUATAN 2016
Dilengkapi dengan FANUC 31iB5
Handwheel elektronik
Perjalanan X 700 Y 400 Z 330 mm
Duodoy Tvfcopfx Airou
Meja 850 x 410 mm
Kepala spindle langsung BBT 30 pada 10.000 R.P.M.
Penukar alat cepat 21 posisi
Pembagi sumbu ke-4 direct drive
Probe laser pengukur alat
Pendingin internal
Pendingin kepala spindle
Iklan kecil
Sevilla
12.674 km
Pusat pemesinan vertikal
Mori SeikiNMV 5000 DCG
Mori SeikiNMV 5000 DCG
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, en:
* Mori Seiki NMV 5000 DCG.
* Year 2008.
* Zero-point clamping system, vices, BT tool holders, turning tool holders, and pallets valued at 50,000–55,000 euros.
* 5-axis continuous machining center.
* High-precision Heidenhain linear scales.
* Interface for pallet loader and robot connection.
* Table with turning function.
* Independent high-pressure coolant system at 40 bar.
* Spindle oil cooling system.
Duedpoy Tt Rcsfx Aireu
* BT 40 tool magazine.
* Magazine capacity: 60 tools.
* Maximum tool diameter: 125 mm.
* Maximum tool length: 300 mm.
* Maximum tool weight: 8 kg.
* X-axis travel: 730 mm.
* Y-axis travel: 510 mm.
* Z-axis travel: 510 mm.
* Table with turning function.
* Maximum workpiece diameter in turning mode: 450 mm.
* Maximum swing diameter in turning mode: 700 mm.
* Mori Seiki Mapps 4 conversational control.
* Spindle speed: 20,000 rpm.
* Spindle motor power: 18.5 / 15 kW
* Maximum cutting torque: 135 Nm.
* C-axis table: 360,000 x 0.001
* B-axis rotation: +160 / -180
* Rapid traverse (X/Y/Z): 50 / 50 / 50 m/min
* Renishaw tool measurement system.
* Renishaw workpiece measurement system.
* Automatic zero-point adjustment.
* Automatic cutting power control.
* Program memory: 2 MB
* Dynamic zero-point correction (up to 8 points).
* Tool availability pre-check.
* Custom macro (999 variables).
* Rear chip conveyor.
* Tool life management (128 x 2 groups).
* Electrical transformer.
* Documentation, parts list, electrical diagrams, programming, and instruction manual.
* Weight: 13,500 kg.
* Machine currently in operation.
* Available for inspection by an authorized Mori Seiki technician.
* Immediate delivery, subject to prior sale.
Iklan kecil
Edermünde
11.091 km
Pusat pemesinan vertikal
HaasTRT210
HaasTRT210
Hubungi
Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 120 h, Near-factory-new Haas TRT210 dual-axis rotary tilting table with only approx. 120 operating hours.
The table was exclusively used on a Haas VF-4 (see separate listing) and is in immaculate visual and technical condition.
The TRT210 is Haas' compact 5-axis solution for medium-sized VMCs, fitting efficiently at one end of the machine table—leaving the rest of the clamping surface available for vises or other fixtures.
Plug-and-play connection to any Haas mill equipped with 4th/5th axis drives and compatible NGC control software.
Scope of delivery includes, in addition to the rotary tilting table itself, the matching toe clamp kit for direct mounting to the machine table, as well as a Renishaw riser block for side mounting the wireless receiver (OMI/OMP)—thus ensuring reliable signal transmission to the probe across the entire A-axis tilt range.
Available from approx. week 32. Viewing possible by prior arrangement. Shipping can be organized.
Dedpsy Tp Hgjfx Airjuu
Technical Data:
- Plate diameter: 230 mm (9.10")
- Max. interference circle: 368 mm (14.5")
- Max. workpiece weight on table: up to approx. 90 kg
- Bolt pattern: 2x 6-hole pattern
A-axis (tilting):
- Tilt range: ±120°
- Max. speed: 80°/s
- Max. torque: approx. 407 Nm (300 ft-lb)
- Clamping torque at 6.9 bar: approx. 540 Nm
- Accuracy: ±25 arc-sec
- Repeatability: 10 arc-sec
- Resolution: 0.001°
B-axis (rotary):
- Rotation range: 360°/continuous
- Max. speed: 100°/s
- Max. torque: approx. 285 Nm (210 ft-lb)
- Clamping torque at 6.9 bar: approx. 270 Nm
- Max. runout: 0.013 mm (0.0005")
- Accuracy: ±15 arc-sec
- Repeatability: 10 arc-sec
- Resolution: 0.001°
General:
- Supply voltage: 115 VAC, approx. 15 A
- Max. air pressure: approx. 10 bar (150 psi)
- Weight: approx. 220 kg
Includes:
- Complete Haas TRT210 rotary tilting table
- Original Haas servo connection cables for A and B axes
- Toe clamp kit (mounting to machine table)
- Renishaw riser block for side receiver mounting
- Original documentation
Iklan kecil
Edermünde
11.091 km
Pusat pemesinan vertikal
HaasVF-4 - 4./5. Achse Paket
HaasVF-4 - 4./5. Achse Paket
Hubungi
Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 259 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1200002, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours.
The machine is in impeccable optical and technical condition.
Factory-equipped, the VF-4 is fully prepared for 4-/5-axis operation—the comprehensive 5th-AXIS package is installed:
- Axis boards for 4th and 5th axis
- Dynamic workpiece offset
- Tool center point control
- High-speed machining
- Programmable coolant nozzle
- Wireless Renishaw workpiece probe and tool probe
Additionally, the machine comes with exceptional features:
- TSC – through-spindle coolant 21 bar
- Spiral chip conveyor
- Complete coolant maintenance package (automatic top-up, oil skimmer, mist condenser)
- Fast 30+1 tool changer
- Spindle with 10,000 rpm
Control is the current Haas Next Generation Control with touchscreen, WiFi, Ethernet, and HaasConnect remote monitoring. This makes the machine ready for demanding machining tasks immediately.
Original transport locks are included. An original Haas tool trolley for SK40 is also supplied.
Available approximately from calendar week 32. Inspection and demonstration under power by appointment at any time.
Loading and transport can be arranged.
A matching TRT-210 CNC rotary tilting table is offered in a separate listing and can be included as a package if desired. The LANG base plates are not included in the scope of delivery.
Technical data:
- Travels X / Y / Z: 1,270 × 508 × 635 mm
- Spindle nose to table: 107 – 742 mm
- Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg
- Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid cooled
- Drive power: 22.4 kW
- Max. torque: 122 Nm at 2,000 min⁻¹
- Rapid traverse X / Y / Z: 25.4 m/min
- Max. feed rate: 16.5 m/min
- Tool changer: Side-mount SMTC, 30+1 positions
- Max. tool diameter / length / weight: 64 mm / 330 mm / 5.4 kg
- Tool change time (chip-to-chip): approx. 3.6 s
- Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed)
- Compressed air: approx. 113 l/min at 6.9 bar
- Coolant tank: 208 l
- Weight: approx. 6,260 kg (with conveyor)
Control:
- Haas Next Generation Control with touchscreen
Duedpjy Tp E Ajfx Airsu
- 1 GB program memory, Ethernet + WLAN
- HaasConnect (remote monitoring), HaasDrop (wireless file transfer)
- M130 media display, safe run, synchronized tapping
- Early power failure detection module, surge protection
- Features/options (all factory-installed):
- 5-axis package VF-YT (4th + 5th axis prepared on drive side, DWO/TCPC, high-speed machining, programmable coolant nozzle)
- Wireless Renishaw probing system (intuitive)
- TSC – through-spindle coolant, 21 bar
- Spiral chip conveyor
- Coolant maintenance package (auto fill, oil skimmer, mist condenser)
- Additional coolant filter (bag filter 25 µm)
- Filter set for chip tray (200 µ)
- Variable coolant flow (M-code controlled)
- Air blow-off inside machine door
- Lifting lugs, touchscreen, door lock
Iklan kecil
Italia
11.248 km
FAMUP MCP70 E
FAMUPMCP70 E
FAMUPMCP70 E
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 480 mm, jarak gerak sumbu Z: 640 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 840D, tinggi total: 3.260 mm, lebar total: 3.360 mm, beban meja: 600 kg, berat keseluruhan: 5.500 kg, kecepatan spindel (maks.): 10.000 rpm, daya motor spindle: 18.500 W, jumlah slot dalam magazin alat: 30, berat alat: 6.000 g, panjang produk (maks.): 3.320 mm, jumlah sumbu: 3, This 3-axis FAMUP MCP70 E was manufactured in 2001. It features an X-axis travel of 700 mm, a Y-axis travel of 480 mm, and a Z-axis travel of 640 mm. The machine is equipped with a table measuring 600 x 450 mm and has a maximum table load of 300 kg. If you are looking for high-quality machining capabilities, the FAMUP MCP70 E vertical machining center we offer for sale is an excellent option. Please contact us for further details.
Dsdpfxjy Tlwzs Airjuu
• Table/Palette
• Table size: 600 x 450 mm
• T-slots: 5 x 14 x 80 mm
• Central bore: Ø50 H6
• Pallet change time: 9 sec
• Axis performance
• Feed rate X/Y/Z: 10,000 mm/min
• Rapid traverse X/Y/Z: 30,000 mm/min
• Working feed force S1 X/Y: 4,800 N
• Working feed force S1 Z: 7,200 N
• Measuring system
• Indirect measuring system
• Accuracy
• Positioning accuracy X/Y/Z: ±5 µm
• Repeatability X/Y/Z: ±1.5 µm
• Reversal accuracy: 3 µm
• Tool changer
• Positions: 30
• Selection: Bidirectional
• Max. tool diameter: Ø75 mm
• Max. tool length: 280 mm
• Tool change time: 1.7 sec
• Chip-to-chip time: 3.5 sec
Technical Specification
Taper size ISO 40
Iklan kecil
Italia
11.248 km
Finetech SMV 1060 H3L
FinetechSMV 1060 H3L
FinetechSMV 1060 H3L
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, jarak pergerakan sumbu X: 780 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 650 mm, produsen pengendali: FANUC, model controller: 0iMF, beban meja: 700 kg, berat keseluruhan: 6.800 kg, kecepatan spindel (maks.): 8.000 rpm, daya motor spindle: 7.500 W, berat alat: 6.000 g, jumlah sumbu: 4, This 4-axis Finetech SMV 1060 H3L was manufactured in 2024. It offers an impressive X-axis travel of 780 mm, Y-axis travel of 600 mm, and Z-axis travel of 650 mm. The machine features a robust table size of 1100 x 600 mm and a maximum table load of 700 kg. If you are looking for high-quality machining capabilities, the Finetech SMV 1060 H3L vertical machining center is worth considering. Contact us for further details.
• Construction: Cast iron structure; roller linear guides
• Control: FANUC 0iMF; 10.5" monitor; remote electronic handwheel
• Table: 1100 x 600 mm; 5 T-slots; T-slot size 18 mm; T-slot pitch 100 mm
• Distances: Spindle nose to table 130–780 mm
• Spindle: Taper No. 40
• Tool Changer (ATC): Tool holder ISO40 DIN69871; magazine with 24 stations; max. tool diameter 80 mm; max. tool length 300 mm; bidirectional selection; tool-to-tool 3 s; chip-to-chip 6 s
• Feed rates: Traverse speeds X/Y/Z 36/36/32 m/min; cutting feed X/Y/Z 1–12,000 mm/min
• Cooling/auxiliaries: Coolant tank 380 L; working pressure 4 bar; total installed power 25 kVA
• Dimensions and weight: 2900 x 2500 x 2800 mm
• Standard features: Rigid tapping; full safety enclosure; bidirectional ATC arm; 24-position tool magazine; spindle oil cooling; Z-axis gas counterbalance system; automatic guideway lubrication; electrical cabinet heat exchanger; work area light; service keys; transformer; operating manuals and CE declaration
Additional equipment:
• Chip conveyor (screw type)
Duodpfx Aey Tlpwsirsu
• Optional chain magazine with 40 tools: BT40/CAT40; max. tool diameter 75 mm with adjacent holders occupied, 152 mm with adjacent holders empty; max. tool weight 8 kg; max. total tool weight 160 kg; required air pressure 5–6 kg/cm²
Technical Specification
Taper Size ISO 40
Iklan kecil
Ortenberg
11.255 km
Pusat pemesinan vertikal
MTRentMTevo V76D
MTRentMTevo V76D
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 510 mm, produsen pengendali: Heidenhain, model controller: TNC640, lebar meja: 860 mm, panjang meja: 500 mm, berat keseluruhan: 4.600 kg, kecepatan spindel (maks.): 15.000 rpm, pasokan pendingin: 20 batang, jumlah slot dalam magazin alat: 40, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, MTevo V76D
Baujahr 2023
2.500 Spindelstunden
Aufgrund einer Projektverlagerung zu verkaufen
Verfahrwege 760x510x510mm
Drehzahl bis 15.000 U/min
SK40 Aufnahme
40 Werkzeugplätze
IKZ 20bar Bandfilteranlage
Druckluft durch die Spindelmitte
Messtaster Heidenhain TS460
Vorb. Werkzeugbruch Heidenhain TT460
Djdpfsy Tahhjx Airsuu
Highlights
Heidenhain TNC640
Lang Nullpunktplatten 96er Raster - zwei 4fach Platten
LTA Luftfiltereinheit
ab sofort verfügbar
Iklan kecil
Jerman
11.248 km
AXA DBZ
AXADBZ
AXADBZ
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 65.155 h, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, lebar meja: 500 mm, panjang meja: 1.350 mm, beban meja: 550 kg, berat keseluruhan: 10.000 kg, kecepatan spindel (maks.): 10.000 rpm, jumlah slot dalam magazin alat: 22, jumlah sumbu: 4, This vertical 4-axis double machining centre AXA DBZ was manufactured in 2007. It features an impressive X-axis travel of 2 x 750 mm, a Y-axis travel of 500 mm, and a Z-axis travel of 600 mm. The machine is equipped with a main spindle speed range of 30–10,000 rpm and a maximum table load capacity of approximately 550 kg. If you are looking for high-quality machining capabilities, you should consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details.
Double machining centre with 2x 4th axis RTA 1-180 Automatic doors (compatible with robotic handling systems) Main spindle speed range 30–10,000 rpm Main spindle drive power approx. 30 kW (40% duty cycle) Max. torque approx. 143 Nm Tool holder SK 40 DIN 69871 / A
Duedpfx Aoy Sg I Eeirju
Internal coolant supply (water – air) Table clamping area 2 x 1,350 x 500 mm Max. table load approx. 550 kg Number of T-slots 3 T-slot width 14H9 mm T-slot spacing 160 mm 4th axis 2 x RTA 1-180 Number of tool positions 22 Tool diameter 85 mm Max. tool diameter with adjacent empty slot 135 mm Max. tool length 400 mm Tool change time 4.0 sec Rapid traverse X/Y 25 m/min Rapid traverse Z 20 m/min Feed force 9 kN Total power requirement 55 kVA Machine weight approx. 10.0 t Operating hours: 65,155 h
Technical Specification
Through-spindle coolant: Yes

























































































































































































































