California Trailer

Kondisi: bekas, nomor mesin/kendaraan: 72004250751, lebar meja: 900 mm, panjang meja: 2.000 mm, Press OMET, kapasitas 250T Meja 900x2.000 mm Langkah per menit: 30-60 Kodpfxsxnzd Re Adqonc Gerak: 18-200 mm

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kedalaman tenggorokan: 500 mm, gaya penekanan: 160 t, lebar meja: 1.250 mm, Power: 160 to --- Working length: 1250 mm Knedpfx Aoxfwdhjdqjc Stroke: 250 mm Throat depth: 500 mm Maximum installation height: 480 mm Weight approx.: 11.2 t Power: 30 kW Application area: Universally applicable machine for straightening / bending / pressing / folding, etc.--- Previously used as a press brake with system tool holder + tools .

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 50 h, Mesin dijual dalam kondisi baik, dengan jam operasional rendah. Kjdexbb Hrepfx Adqonc

Kondisi: diremajakan ulang (bekas), en-GB: Complete retrofit Pressing force: 1,600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW - A complete retrofit kit for unrestricted manual loading and unloading in compliance with EU directives and implementation of CE-compliant equipment, - New control cabinet with certified dual-channel electronic PLC safety control by Siemens (1512SP F or 1515F) for process control, featuring an integrated operator panel for the following operating modes: setup - two-hand, single stroke - two-hand, and foot operation (only in combination with BWS); manual lever operation is no longer possible, - Hydraulic safety block for monitoring the closing movement of the main cylinder, Kodjw S Uazjpfx Adqonc - Position-monitored directional valve for the up and down movement of the main cylinder ram, - Two-hand control unit with dual-channel monitoring of the two-hand synchronization at the press table (incl. 5m cable), - Replacement of the main and control pump motors, - Replacement of the main cylinder seals, - Fine filter with contamination indicator, - The press is equipped with an electronic travel measurement system (incl. teach-in function and display of the current ram position). This eliminates the need for a mechanical cam switch. Main control panel integrated in the control cabinet (mounted on the right side of the machine) - 12" touch panel - Control buttons and switches for operating modes and drives - USB interface for data exchange - Light curtain Option: Drawing cushion

Kondisi: bekas, Tahun pembuatan: 1990, Pressure: 160 t Stroke: 200 mm Throat depth: 500 mm Installation height: 500 mm Table surface: 1140 x 980 mm Table height above floor: 860 mm Ram surface: 1000 x 800 mm Oil capacity: 1000 l Drive power: 50.0 kW Weight: 18.0 t Required space approx.: 1.3 x 2.6 x 3.4 m (LxWxH) Through-hole in table: 180 mm Year of manufacture: 1981 – Modernized: 1990 Knedpfxswvva Sj Adqsc Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Fitted with oil-hydraulic drive; pressure, time, and stroke dependent control; hydraulic cutting shock absorption; mechanical depth stop; two-hand operation. Can be offered unused or alternatively with new Siemens S7-1500 F control system.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4701, gaya penekanan: 394 t, lebar meja: 51 mm, panjang meja: 680 mm, panjang langkah: 200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Front: 510 mm Side: 270 mm Ram stroke: 200 mm Clear opening: 455 mm Table Table size: 510 × 680 mm Force and Drive Pressing force: 394 t Knodjwr Dvyjpfx Adqoc Motor power: 15 kW Speeds Downstroke speed: 350 mm/s Working speed: 4 mm/s Return speed: 300 mm/s MACHINE DETAILS Height: 2,710 mm Width: 1,530 mm Depth: 1,610 mm Machine weight: 6,620 kg

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi total: 3.250 mm, lebar total: 3.650 mm, panjang total: 6.000 mm, gaya penekanan: 400 t, lebar meja: 2.520 mm, panjang meja: 6.000 mm, kecepatan operasi: 3 mm/dtk, berat keseluruhan: 28.500 kg, kecepatan mundur: 18 mm/dtk, tekanan: 319 batang, daya: 11 kW (14,96 hp), HYDRAULIC PRESS FOR STRAIGHTENING LARGE ELECTRO-WELDED STRUCTURES AND OXY-FLAME CUT SHEET METAL The TL-400-6000E hydraulic press belongs to the T/NC series and is custom-designed for straightening large electro-welded structures and oxy-flame cut plates. As with all our T/NC series hydraulic presses, its design facilitates the loading and unloading of large workpieces, plates, or structures. It allows access to various pressing points without having to move the workpiece thanks to the lateral movement of the cylinder and the longitudinal movement of the bridge. It features an optimized hydraulic system operating at a pressure below 319 Bar, thereby ensuring long-lasting durability and high reliability in its operation. STRUCTURE AND TABLES - Comprises an electro-welded frame manufactured exclusively from S355JR steel. - The structure is stabilized and machined after welding to guarantee perfect parallelism and precision. - Designed and calculated using finite element analysis software. - Longitudinal movement of the bridge is driven by a frequency inverter and toothed belt. - Lateral movement of the head is motorized and controlled via frequency inverter. Complies with all essential health and safety requirements as per CE standards. CYLINDER AND HYDRAULIC UNIT - Double-acting cylinder with honed barrel, chrome-plated piston rod, and maintenance-free anti-wear guides. - Equipped with a removable and interchangeable pad to prevent damage to the piston and machined at the end to accommodate tooling. - Standard anti-rotation device and front graduated scale with limit switches for stroke adjustment. - Motorized hydraulic unit with two speeds and automatic deactivation of high speed. - Includes a cylinder decompression valve. Knedpfxewpgmvj Adqjc - Pressure regulator. - Glycerine manometer with tonnage readout. ELECTRICAL INSTALLATION AND SAFETY - Electrical panel includes a selector switch for choosing between manual and semi-automatic operation. - Also features a selector to choose between rapid approach speed or slow working speed. - Operated via a pendant control station with emergency stop and low-voltage maneuvering. - Includes a confirmation pushbutton for operations. - Equipped with a safety rope device installed around the perimeter.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi total: 3.500 mm, lebar total: 2.400 mm, panjang total: 1.000 mm, kedalaman tenggorokan: 500 mm, gaya penekanan: 300 t, lebar meja: 1.000 mm, panjang meja: 700 mm, kecepatan operasi: 14 mm/dtk, berat keseluruhan: 13.500 kg, kecepatan mundur: 265 mm/dtk, tinggi kerja: 1.100 mm, jangkauan kerja: 800 mm, tekanan: 290 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Tekanan: 300 ton Daya motor: 30 kW Kedalaman pelubangan: 500 mm Kecepatan kerja variabel: 14,9 hingga 9 mm/detik Kecepatan pendekatan: 178 mm/detik Kecepatan mundur: 265 mm/detik Tekanan maksimum: 290 bar Langkah piston: 500 mm Ukuran meja bawah: 1.000 x 700 mm Ksdpewpf S Defx Adqonc Ukuran meja atas: 800 x 600 mm Cahaya vertikal maksimum: 800 mm Tinggi kerja: 1.100 mm Lebar depan total: 10.000 mm Total lebar samping: sekitar 2.400 mm Total tinggi: sekitar 3.500 mm Berat: sekitar 13.500 kg.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HV-300NC, tinggi total: 1.840 mm, tinggi meja: 950 mm, lebar total: 3.200 mm, panjang total: 2.500 mm, gaya penekanan: 300 t, panjang meja: 750 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 15 mm/dtk, panjang langkah: 450 mm, kecepatan penekanan: 2 mm/dtk, Perlengkapan: dokumentasi / manual, TECHNICAL DATA: Knodpfxjwk Hkqo Adqjc Pressure 300 t Motor output 7.5 kW Throat 405 mm Working speed 2 mm/s Approach speed 9.9 mm/s Return speed 14.7 mm/s Maximum pressure 320 bar Piston stroke 450 mm Support table 2,500 x 750 mm Guide diameter 60 mm Main table 750 x 750 mm Maximum daylight between tables 900 mm Working height 950 mm Support blocks 150 x 150 x 750 mm Overall length 3,200 mm Overall width 2,500 mm Overall height 1,800 mm Weight 13,300 kg DESCRIPTION: Our horizontal hydraulic ram presses of the HV/NC series are available with three different pressing forces from 150 to 300 tons. Horizontal hydraulic presses are specifically designed for the straightening and bending of profiles, bars, and beams. Thanks to the horizontal design of the machine, large beams and profiles can be worked with ease. The latest generation horizontal hydraulic press of the HV/NC series has evolved into a versatile machine capable of accommodating a wide range of tool options. STRUCTURE AND TABLES The horizontal hydraulic straightening presses of the HV/NC series consist of a C-frame electro-welded structure manufactured exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. The design is calculated using finite element software. All of these features ensure that we consistently meet our high standards for robustness, precision, and quality. They are equipped with a main sliding table and a rear support table made of high-strength steel with T-slots to DIN 650. Support blocks made from C45E steel are supplied as standard. The main table ensures perfect parallelism via four cylindrical guides with maintenance-free bimetallic bushings for frictionless operation. Adjustable support rollers on each side are included as standard equipment. CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with seamless cold-drawn tube, chromed piston, and maintenance-free wear-resistant guides. Motorized hydraulic unit with two speeds and automatic fast-speed shut-off. Includes a cylinder decompression valve. ELECTRICAL INSTALLATION AND SAFETY The machine features a SIEMENS safety PLC, SIMATIC S7 1200 type and a 4-inch MTP-400-type touchscreen located above the electric foot pedal. It allows programming of semi-automatic and automatic operation modes, power, stroke, and dwell time of the upper cylinder. There is a memory capacity for 99 recipes, with all parameters programmable for each recipe. The electrical control panel features a selector switch for choosing between manual or automatic operation, and a keyed selector for maintenance operations. Electrical and hydraulic controls are redundant and self-monitoring. An additional safety block and self-monitoring devices for controls and safety are integrated.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 400 t, lebar meja: 2.000 mm, panjang meja: 1.000 mm, kecepatan operasi: 106 mm/dtk, kecepatan mundur: 125 mm/dtk, panjang langkah: 750 mm, kecepatan penekanan: 12 mm/dtk, Perlengkapan: penghadang cahaya keselamatan, HYDRAULIC C-FRAME PRESS FOR STRAIGHTENING RAILWAY TRACKS We are offering a new or rebuilt version of this press. The press will be available for sale by the customer in Q2-Q3 2026, as the project timeline has been extended. The hydraulic press CF-400E/NC is part of the CF/NC series and has been specifically developed for the straightening of railway rails. It is equipped with an upper and lower table made from machined C45E steel with DIN 650 T-slots. The press uses an optimized hydraulic system with a pressure of less than 255 bar, ensuring long service life and reliable performance. It meets all essential safety and health requirements as per CE regulations. TECHNICAL DATA Pressing force T 400 Motor power kW 22 Variable working speed mm/s 4-12 Approach speed mm/s 106 Return speed mm/s 125 Maximum pressure Bar 255 Kjdpewkv A Njfx Adqsnc Stroke mm 750 Lower table mm 2,000 x 1,000 Ram plate mm 2,000 x 1,000 Maximum vertical clearance mm 1,000 Working height mm 960 Total height mm 3,560 + 600 Weight kg 39,500 STRUCTURE AND TABLE: • The C-frame is fully welded and made exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Calculated and designed using finite element analysis software. • The upper table ensures perfect alignment thanks to four lateral cylindrical guides (80 mm diameter) fitted with maintenance-free bimetallic bushings. CYLINDER AND HYDRAULIC UNIT • Main cylinder is single-acting, jacketed, with a chrome-plated piston and maintenance-free, wear-resistant guides. • Two side-mounted double-acting cylinders with chrome-plated pistons and wear-resistant guides allow rapid advance and return speeds. • Equipped with two independent hydraulic safety blocks. • Motorized hydraulic unit with pre-fill valve for advance and return. Constant power pump with variable flow rate. • Fitted with a directional valve, pressure relief valve, decompression valve, and an air-oil cooling system. • Glycerin manometer with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7” touchscreen, model KTP-700 COMFORT, installed in the control cabinet. Allows programming of semi-automatic and automatic operating modes, output, stroke, and dwell time. Offers a storage capacity of 300 recipes, with each recipe allowing pre-programming of all parameters. • All electrical and hydraulic controls are redundant and self-monitored. Includes an additional safety block and built-in self-monitoring devices for controls and safety circuits. Includes verification and certification of correct functionality and safety distances for light curtains. • Operation via a low-voltage electric foot pedal. • For safety, the system is equipped with Category IV safety laser and workspace protection with light curtains.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi total: 3.500 mm, lebar total: 2.800 mm, panjang total: 1.200 mm, gaya penekanan: 300 t, Hydraulische Presse Marke: Van De Graaf Typ: HVK-300 Kapazität: 300 t Kodpfxowhc H As Adqjnc

Kondisi: bekas, Tahun pembuatan: 1986, Tekanan 160 t Jangkauan 360 mm Langkah 500 mm Kecepatan turun 200 mm/detik Kecepatan naik 125 mm/detik Jarak maksimum meja - penekan 1000 mm Dimensi meja 900 x 630 mm Dimensi penekan 850 x 450 mm Diameter x Kedalaman pin penjepit 50 H7 / 85 mm Kebutuhan daya total 17 kW Berat mesin kira-kira 7 t Knedpfxsv Rgwxe Adqoc Kebutuhan ruang sekitar PxLxT 1,25 x 2,2 x 3,45 m

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 5.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2089, tinggi total: 5.000 mm, tinggi meja: 1.000 mm, lebar total: 3.000 mm, gaya penekanan: 250 t, berat keseluruhan: 25.000 kg, MIB HYDRAULIC PRESS YEAR: 01/2000 CAPACITY: 250T Ksdpfx Asv Hbh Rodqsnc MACHINE TO BE RECOMMISSIONED, COMPLETE

Kondisi: bekas, Tahun pembuatan: 1998, Pressure: 315 t Stroke: 500 mm Throat depth: 425 mm Installation height: 1000 mm Table size: 1200 x 815 mm Table height above floor: 800 mm Ram size: 1100 x 700 mm Speed downward: from 48 mm/s Speed upward: 330 mm/s Knodevzxphjpfx Adqjc Working speed: 19 mm/s Oil capacity: 1600 l Drive power: 82.0 kW Weight: 23.0 t Space requirement approx.: 2.4 x 2.8 x 4.0 m (LxWxH) Approved for manual loading according to CE standard with electro-hydraulic drive, pressure/time and stroke-dependent control, photoelectric safety guard at the front (Sick), two-hand operation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, tinggi meja: 400 mm, gaya penekanan: 500 t, lebar meja: 5.500 mm, panjang meja: 3.000 mm, TECHNICAL DETAILS Capacities Maximum force: 500 t Return force: 200 t Table dimensions: 5,500 x 3,000 mm Table stroke: 3,500 mm Table height above floor: 400 mm Table extension speed: 60 - 80 mm/s Slide stroke: 1,800 mm Kodpfx Adou Iy Troqjnc Daylight opening: 2,000 mm Cushion dimensions: 3,960 x 1,860 mm Cushion upper stroke: 180 mm Cushion force: 100 t Rapid return speed: 35 mm/s Electrical power supply: 380 V, 50 Hz Power: 59 kW EQUIPMENT Siemens PLC Bolster table with dimensions of 5,500 x 3,000 mm Control cabinet cooling CE marking

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: STHP 80KN, tinggi total: 1.320 mm, lebar total: 510 mm, panjang total: 200 mm, gaya penekanan: 8 t, lebar meja: 300 mm, berat keseluruhan: 110 kg,

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, tinggi total: 34.500 mm, tinggi pemasangan: 800 mm, lebar total: 12.500 mm, panjang total: 22.000 mm, kedalaman tenggorokan: 800 mm, gaya penekanan: 160 t, lebar meja: 900 mm, panjang meja: 630 mm, kecepatan operasi: 200 mm/dtk, berat keseluruhan: 7.000 kg, kecepatan mundur: 125 mm/dtk, lebar pelat tuas: 700 mm, panjang pelat penekan: 450 mm, jenis arus masuk: tiga fasa, panjang langkah: 500 mm, tekanan kerja: 160 batang, tekanan: 250 batang, kapasitas tangki oli: 500 l, daya: 17 kW (23,11 hp), Press hidrolik PYE 160 S/1M. Tahun produksi 1984. Produsen VEB Wema Zeulenroda (Jerman). Mesin telah menjalani pemeriksaan menyeluruh. Spesifikasi: Gaya tekan maksimum 160 ton. Tekanan kerja 16 MPa. Meja atas 700 x 450 mm. Meja bawah 900 x 630 mm. Celah bebas 800 mm. Langkah silinder 500 mm. Kecepatan turun 200 mm/dtk. Kecepatan naik 125 mm/dtk. Kebutuhan daya 17 kW. Kapasitas oli dalam tangki 500 l. Berat 7000 kg. Tinggi 3450 mm, panjang 2200 mm, lebar 1250 mm. Mesin dalam kondisi sangat baik. Dapat dilakukan inspeksi dan pengujian mesin saat beroperasi. Kjdpsqy E I Rjfx Adqjnc

Tahun pembuatan: 1974, Kondisi: bekas, nomor mesin/kendaraan: 82, Hydraulic frame press for sheet metal punching with a capacity of 630 tons, designed for cold forming. The vertical frame press, featuring a welded steel construction, consists of a bed and a top platen joined by bolts. A control cabinet is installed adjacent to the press, and an oil overflow tank is located deep within the foundation, facilitating oil filling for the press system. The press units are removable, simplifying assembly and maintenance. The press is operated via push-button control. The stroke height of the ram is set by adjusting the end-stop position. Knedpfx Aepgkt Ssdqec Technical specifications: 1. Rated pressing force: 630 tons 2. Rated operating fluid pressure: 2,200 kN/cm 3. Ram stroke: 750 mm 4. Ram speed, mm/s: a) Idle speed: 215 b) Working stroke: 10 c) Return stroke: 120 5. Maximum distance between bed and ram: 1,400 mm 6. Distance between uprights: 2,200 mm 7. Table dimensions, mm: a) Left to right: 2,220 b) Front to back: 1,800 8. Die plate thickness: 220 mm 9. Table height above floor: 410 mm 10. Nominal force of hydraulic cushion: 250 tf 11. Hydraulic cushion stroke: 350 mm 12. Ejector speed, mm/s: a) Ascending: 51 13. Press dimensions, mm: a) Left to right: 5,070 b) Front to back: 3,000 c) Height: 7,065 14. Press height above floor: 5,480 mm 15. Press weight: 69,400 kg Electric motor speed: 1,450 min-1 Operating voltage: 400/230 V Mains frequency: 50 Hz ± 1 % Rated air pressure: 0.7 Pa

Tahun pembuatan: 1992, Kondisi: bekas, nomor mesin/kendaraan: 530, The STEINER hydraulic press has been designed and manufactured with practical considerations in mind. The hydraulic unit is mounted on the hydraulic tank at the rear of the press. Control blocks and valves are easily accessible from the outside and can be replaced quickly if necessary. The hydraulic radial piston pump is installed on the drive console and is connected via a coupling to the motor and pump mounting. The press frame is indestructible and torsion-resistant, made from a steel welded construction. The bolster table is bolted to the frame. The hydraulic cylinders are mounted from above onto the press frame and are guided in the required direction through the mounting holes. The piston is connected to the piston rods via a split ring. Four-sided, diagonal, flat grooves in the frame enable highly precise movement. The hydraulic cylinders are made from high-quality materials and are designed for high pressure. The piston rods are ground and hard-chrome plated. The cylinder tubes are honed internally. Seals, proven over many years, are characterized by high quality and tightness. The piston rod guidance uses guide bands that stand out due to minimal wear and long service life. The control panel houses control, regulation, and monitoring devices for all control units. Mutual interlocks ensure that two program processes cannot run simultaneously. The electrical control system is located in a closed control cabinet. Press force – 8,000 kN Operating pressure – 285 bar Installation height – 850 mm Stroke – 250 mm Table area – 1,550 x 1,450 mm Ram area – 1,550 x 1,450 mm Frame passage – 1,800 mm Lateral opening in the frame right & left Width x height – 1,300 x 1,075 mm Table plate thickness – 155 mm Machine width approx. – 3,100 mm Depth approx. – 4,300 mm Height approx. – 4,660 mm Table height above floor – 500 mm Table height below floor – 755 mm Drive power – 55 kW Oil capacity approx. – 1,400 litres Knsdpfx Aspgktcsdqoc Total weight approx. – 60 tons

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), de-gebrauchte-loire-2000t-hydraulische-h-rahmenpresse-zum-verkau f Tischabmessungen (x-y/mm): 5000×2500 Stößelabmessungen (x-y/mm): 5000×2500 Hub (x/mm): 1700 Lichte Weite in OT (x/mm): 2700 Seitenfenster (x/mm): 2900 Ziehkissen im Stößel (x-y/mm): 3400×1900 Hub des Ziehkissens im Stößel (x/mm): 150 Gesamthub Ziehkissen (x/mm): 400 Ziehkissenkraft (t): 600 Seitlich verfahrbarer Unterbau Marke: Loire Presskraft: 2000 t Tischabmessungen (x-y): 5000 x 2500 Stößelabmessungen (x-y): 5000×2500 Hub: 1700 mm Lichte Weite in OT: 2700 mm Geschlossene Höhe: 1000 mm Seitenfenster Seitenfensterabmessung (x-y/mm): 2900 Innere Stößelabmessungen (x-y): 3400×1900 Hub: 150 mm Arbeitsgeschwindigkeit bis 100%: 22 mm/sec Hub/min: 37 mm/sec Hub/min: 400 mm/sec Hub/min: 350 mm/sec Ziehkissen Kraft: 600 t Hub: 400 mm Kjdpon Sma Hsfx Adqjnc Ziehkissentischabmessungen (x-y): 3700×1900 Zubehör Seitlich verfahrbarer Unterbau Gesamtabmessungen Gewicht: 310 t Breite: 6250 mm Tiefe: 5000 mm Höhe: 9650 mm Zustand Maschinenzustand: Funktionsfähig Elektrik: Funktionsfähig Baujahr: 2003 Neue hydraulische H- Rahmenpresse inkl. Garantie erhältlich

Kondisi: baru, Pressure: 125Motor: 22Mounting height: 500Stroke length (max.): 400Table size: 800 x 600 x 120Ram area: 800 x 600 x 300Table height: 850Dimensions (LxWxH): 1,600 x 2,000 x 3,200Weight approx.: 7,000Oil fill: 400Control / Key switch: 1. Setup mode manual without light sensor (max. 10mm/sec travel speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 220 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Auxiliary guide: 2 pcs Ø 50 mm Motor: 15 kW – 22 hp (IE-3) Pump: 48 liters / ASC Speed: Advance 120 mm/sec – Return 140 mm/sec – Pressure: 13 mm - 5 mm/sec Mounting height: 500 mm Stroke length: 400 mm Table plate: 800 x 600 x 120 mm (with T-slots) (custom design possible) Ram plate: 800 x 600 x 300 mm (with T-slots & ribbed weld) Table height: 850 mm (floor to upper table edge) ----- Hydraulics accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (10 – 125 tons) Adjustable speed via PLC Air cooler Pre-fill valve Control accessories: Siemens S7-1200 Main control cabinet Swiveling control console Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear scale for setting stroke length Kjdpfx Adomr Hpcjqenc 9” PLC display – Siemens (German & English) Movable two-hand operation Ethernet connection for remote maintenance Alarm system for faults (light & sound) Double workspace lighting 8 free I/Os at the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With side safety door (doors are retractable to the rear)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, Breite 4 Meter Nennkraft 1250 kN CNC-Hinteranschlag Kodelqwvkjpfx Adqonc Schnellwechsel-Werkzeugaufnahme

Tahun pembuatan: 2023, Kondisi: baru, Pressing force 150 t Siemens PLC Bosch/Rexroth hydraulics Stroke 400 mm Table size 600 mm x 800 mm Knodpokyu Hvofx Adqsc

Tahun pembuatan: 1990, Kondisi: hampir baru (bekas), Qualitäts-WMW 250-Tonnen C-Gestell-Hydraulikpresse zu verkaufen Die Tischgröße der Maschine beträgt ca. 630 mm x 850 mm, mit einer Öffnung (Lichte Weite) von 300 mm. Ksdpfjig Hzkox Adqjnc Die Presse ist mit einer 150 mm Zwischenplatte (Packerplatte) ausgestattet, die entfernt werden kann, um eine Öffnung von 450 mm zu ermöglichen.

Kondisi: diremaj di bengkel (bekas), NR.01 Three-cylinder hydraulic press BIGNOZZI Capacity: 200 Ton Completely overhauled Table size: 1550 x 1050 mm Daylight opening: 1000 mm Ram stroke: 500 mm Table height: 1180 mm Dimensions: 2900 x 1700 x 2900 (h) mm Knodpfx Adohnc R Ieqjc Weight: 10 Ton