GMM GmbH

Kondisi: baik (bekas), Tahun pembuatan: 2000, DECKEL MAHO DMU 125 P hi-dyn 5-Axis Universal Machining Center with Equipment Year of Manufacture: 2000 Control: HEIDENHAIN TNC430 Machine Number: 11180000233 Travel Paths: X – 1,250 mm / Y – 880 mm / Z – 800 mm B-axis: infinitely variable C-axis indexing: 360º (0.001º increments) Feed rates: 40 m/min Gusdpfsx Hxu Hjx Ag Rok Rapid traverse: 40 m/min Equipment: NC milling/rotary table 1,250 mm x 1,000 mm Max. workpiece weight: 2,000 kg Spindle: SK40, speed up to 12,000 rpm Tool changer: 30 positions Coolant tank capacity: 600 l Electronic handwheel Chip conveyor Through-spindle coolant supply Rotating viewing window Rinsing gun HEIDENHAIN probing system Paper band filter Included in delivery: Extensive tool holders (some equipped with tools) Hydraulic clamping vise Storage table Operating manual/documentation Machine parameters on storage medium See PDF for complete equipment, technical data, and transport information. Illustration, contents, and data are provided without guarantee and are therefore non-binding. Any other accessories visible in the photos and video are not included in the delivery scope and are not part of this sale. Only those accessories explicitly listed here, in the order confirmation, and the invoice are included. FCA (Free Carrier, truck loaded) D-04654 Frohburg Packaging only Immediate availability Subject to prior sale / Payment due immediately upon purchase.

Kondisi: baik (bekas), Tahun pembuatan: 2012, EiMa ALPHA T CONTURA 5-Axis Universal Machining Centre Year of manufacture: 10/2012 Control unit: SIEMENS 840D sI 720 NCU Machine number: 11744 Travel paths X – 5,029 mm / Y – 1,202 mm / Z – 772 mm B-axis travel: ± 121° C-axis travel: ± 211° Feed speed X/Y/Z = 60/60/40 m/min New milling spindle installed on 19 May 2025 Equipment: - 5-axis fork-type head - Milling spindle: 15 kW/12 Nm / 24,000 rpm For milling, drilling, and sawing - Disc tool changer: 12 tools, HSK-63 F - Pick-up station for saw blade - Spindle cooling unit - Fluidtech minimum quantity lubrication system - Partition wall for alternating machining - Vacuum clamping plate (WITTE brand) 2,100 mm x 1,200 x 42 mm Guedpfjx Hvzqox Ag Rek - Chip conveyor - Extraction unit (LOSMA NEWTON N6 brand) Included in delivery: Approximately 35 tool holders / Operating manual & documentation For equipment, technical data, and transport drawings – see PDF. Illustrations, content and specifications are non-binding and provided without guarantee. All other accessories shown in photos and videos are not included in the scope of delivery, and thus are not part of this sale. The scope of delivery only includes accessories that are explicitly listed here, in the order confirmation, and the invoice. FCA (Free Carrier Truck-Loaded) D-97944 Boxberg Packing only Delivery time: Immediately Subject to prior sale / Payment due immediately upon completion of purchase.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, jam operasional: 12.541 h, Sumbu-X: 800 mm (dengan meja putar miring) Gusdpfx Agsx Htp Ss Rjk Sumbu-Y: 1.000 mm (melintang) Sumbu-Z: 655 mm (modus spindle vertikal dengan meja miring) Kecepatan spindle: 12.000 RPM Taper: ISO-B40

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 21705, jarak pergerakan sumbu X: 7.500 mm, Portal machining center BDM FBZ 7500 (Year 2016) Portal machining center FBZ 7500 by manufacturer BDM, from ongoing series production, year of manufacture 2016. The unit was used for machining metal parts and furniture fittings and is fully operational. Application area: – Machining large-format workpieces and profiles – Drilling, milling, and machining of aluminum and steel components – Especially suitable for series production in the fittings and metal sector Technical features (excerpt): – Gantry-type construction with a large working area (X-axis for long workpieces/profile parts) – CNC control with industrial-grade operator panel – Sturdy machine table with clamping options for fixtures and workpieces – Specially constructed version of the system, designed for specific parts/processes Condition / Maintenance: – Well-maintained used condition from a family-run business – The machine has been used in production, test run possible by arrangement – Regular maintenance during operation Guedpfx Agex Hqb Ej Rek – Technical documentation and photos available Inspection possible by appointment. Dismantling and loading can be organized together with the buyer.

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: PIS 3837, jarak pergerakan sumbu X: 4.500 mm, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, CNC portal milling machine PRATIC PIS-CNC 4500S-2W (Year 2019) CNC portal milling machine PRATIC PIS-CNC 4500S-2W from ongoing serial production, year of manufacture 2019. The machine has been used for machining metal parts and furniture fittings and is fully operational. Scope of application: Guodpfx Agex Hp Nbs Rsk – Milling and drilling of aluminum and steel profiles – Processing of long parts / profiles in series production – Ideal for fittings, metal, and profile processors Technical features (excerpt): – Gantry design with large working area (X-axis approx. 4,500 mm) – CNC control with user-friendly interface – Rigid machine table with clamping options for profiles and workpieces – Designed for economical series production Condition / Maintenance: – Well-maintained used condition from a family business – Machine is currently still in operation, test run possible by arrangement – Regular maintenance during operation – Connection data: 400 V / 50 Hz, total connected load approx. 30 kVA, rated current approx. 55 A – Technical documentation and photos available Inspection possible by appointment. Dismantling and loading can be organized by arrangement.

Kondisi: baik (bekas), Tahun pembuatan: 2002, machine-details Inventory number 1022-2417 Machine type Machining Center - Universal Brand FPT Model Dino Gedpfox E Tyzex Ag Rsuk Year of manufacture 2002 Condition Well maintained CNC control type CNC Control system Heidenhain iTNC 530 Location Southern Germany Country of origin Italy Delivery time Immediate Freight terms Ex works (from foundation) Technical Details: X-axis travel 2800 mm Y-axis travel 800 mm Z-axis travel 2200 mm Control system Heidenhain iTNC 530 Total power requirement 68.7 kW Space requirement approx. 12.4 x 3.5 x 4.6 m Additional information: The FPT DINO is a gantry milling machine designed for the precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 18,000 rpm, this machine combines large machining capacity with outstanding dynamics in finishing operations. CNC path control: Heidenhain iTNC 530 Number of controlled axes: X/Y/Z/C/B Travel paths: X-axis (longitudinal travel) 2800 mm Z-axis (vertical travel) 800 mm Y-axis (cross travel) 2200 mm Feed rates 35,000 mm/min. Spindle speed 18,000 rpm Machine length 12,434 mm Machine width 3,597 mm Machine height 4,622 mm

Kondisi: baik (bekas), Tahun pembuatan: 2004, 5-achsen-cnc-bearbeitungszentrum-universal-dmu160 Gujdpfxsx Ey N As Ag Rsk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, • Travel distances: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 530 control system with HR 410 handwheel • NC rotary table for multi-side machining, 1600 mm x 1250 mm • 1-axis NC universal boring and milling head for simultaneous and positioning operation (A-axis, 45° axis) • Motor spindle: maximum 7,000 rpm, SK 50 taper, 530 Nm spindle torque • Tool changer system for SK 50, 40 positions, accommodates tools up to 400 mm in length • Chip augers along the X-axis for optimal chip evacuation • Chip conveyor (hinged belt type) for transverse evacuation, manufacturer: Knoll, discharge at the front • Coolant system, 950 l capacity, manufacturer: Knoll • External/internal air supply at the spindle • ICS (internal coolant supply) 60 bar for deep hole machining Gusdpfjx Em Rasx Ag Rsk • Operating mode 4 • Fully enclosed machine cabin with safety glass sliding doors, optimized for crane loading • Split sliding doors at the front • Split sliding doors on operator side • Wireless probing system RMP 60 • Including cleaning gun • Short delivery time upon request; subject to prior sale • Used machine • Z-axis ball screw replaced, including bearings, in September 2023 • Optional: clamping elements and anchor rods • Optional: commissioning/setup • Optional: transport

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2010, • Travel range: X = 3,100 mm, Y = 1,950 mm, Z = 1,390 mm • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining, 3,000 mm x 1,600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning operation • Spindle: 10,000 rpm, HSK 100 interface, 130 Nm spindle torque • Tool changer system: HSK 100 / 40 pockets for tools up to 750 mm in length • Chip augers in X-axis for optimal chip evacuation • Chip conveyor (scraper type) for cross transport, manufacturer: Knoll • Coolant supply, 900 L, manufacturer: Knoll Gedpex Em N Ajfx Ag Reuk • External air • ICS (internal coolant supply) 60 bar for deep hole machining • Full enclosure with safety glass panels, open at the top for optimized crane loading • Split sliding doors at the front • Split sliding doors at the operator side • Wireless probe RMP 60 • Including wash gun • Including platforms at loading and operator sides • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale • Used machine • Y-axis ball screw replaced including bearings in September 2021 • X-axis linear guide and carriages replaced in July 2023 • Milling spindle overhauled in May 2023 (new clamping set, new clamping cartridge, new rotary union, general inspection) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: leveling shoes • Optional: commissioning/installation • Optional: transport • Total spindle hours: 23,122 • Total machine hours: 53,991 • Year of manufacture: 2010 Subject to prior sale

Kondisi: baik (bekas), Tahun pembuatan: 2005, Hermle U 1130 / 5 sumbu simultan, tahun pembuatan 2005, kontrol Heidenhain iTNC 530, perjalanan sumbu X/Y/Z 1300/720/630 mm, penukar alat 28 posisi, holder HSK 63, ukuran meja 1000 x 800 mm, meja putar NC terintegrasi 360°, sumbu B tanpa langkah pada kepala frais NC, kecepatan spindle hingga 12.000 rpm, pendingin internal 80 bar, PLC expansion, ekstraksi kabut oli, total jam spindle 11.000. Gjdpfx Aex D U Dcsg Rjuk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 11.000 h, Unit Kontrol Merek: HEIDENHAIN Penggerak Utama Rentang kecepatan spindle: 15000 rpm Jumlah sumbu: 5 Pergerakan Pergerakan Sumbu Z: 700 mm Pergerakan Sumbu X: 1350 mm Rapid traverse Sumbu X: 30 m/menit Gsdsx D D Eijpfx Ag Rsuk Pergerakan Sumbu Y: 1150 mm Rapid traverse Sumbu Y: 30 m/menit Benda Kerja Berat benda kerja: 1600 kg Meja Daya dukung meja: 1600 kg Perkakas Slot penyimpanan: 30 Mesin +GF+ MIKRON HPM 1350U 5-sumbu ini diproduksi pada tahun 2018. Ideal untuk pemesinan tingkat lanjut, pusat pemesinan universal ini menjamin presisi dan efisiensi. Jangan lewatkan kesempatan untuk membeli pusat pemesinan universal +GF+ MIKRON HPM 1350U ini. Hubungi kami untuk informasi lebih lanjut. Tipe Aplikasi Penggilingan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 16.421 h, de-DE Gusdpfx Agox D Igwo Rsk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, Penggerak Utama Jumlah sumbu: 5 Kecepatan spindle: 15.000 RPM Daya motor spindle: 46 kW Tipe dudukan alat: SK 40 Pergerakan Pergerakan Sumbu X: 2.600 mm Pergerakan Sumbu Z: 900 mm Pergerakan Sumbu Y: 1.100 mm Unit Kontrol Gedpjx D Iclefx Ag Reuk Merek: SIEMENS Model: 840D sl DMG DECKEL MAHO DMF 260-11 5-sumbu ini diproduksi pada tahun 2017. Merupakan pusat pemesinan universal dengan kolom berjalan, drive linier sumbu X hingga 80 m/menit, dan kecepatan spindle motor hingga 15.000 rpm. Dilengkapi kepala putar, majalah alat 30 slot, dan meja kokoh berukuran 3.200 x 1.100 mm. Manfaatkan kesempatan untuk membeli pusat pemesinan universal DMG DECKEL MAHO DMF 260-11 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Milling

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Data Umum Berat mesin: 3.450 kg Unit Kontrol Merek: Schüco Penggerak Utama Kisaran kecepatan spindle: hingga 18.000 rpm Jumlah sumbu: 4 Gerakan Pergerakan Sumbu X: 7.530 mm Pergerakan Sumbu Y: 1.180 mm Pergerakan Sumbu Z: 660 mm Perlengkapan Tambahan Gedpfxjx D H Tpj Ag Reuk Jumlah clamp: 8 SCHÜCO PBX AL-7200 4-axis ini diproduksi pada tahun 2008. Mesin ini memiliki panjang lintasan sumbu X yang besar yaitu 7.530 mm, lintasan sumbu Z 660 mm, dan kecepatan spindle maksimal 18.000 rpm. Mesin dilengkapi dengan majalah alat dengan 8 posisi dan mampu melakukan pemesinan dari tiga sisi, cocok untuk profil aluminium maupun baja. Dilengkapi dengan sistem kontrol CNC SCHÜCO dan berat sekitar 3.450 kg. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Milling

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Steuerung Marke HEIDENHAIN Modell iTNC 630 Hauptantrieb Godpfx Agsx D Hlxo Rsuk Anzahl der Achsen 5 Verfahrwege X-Achse 1520 mm Y-Achse 700 mm Z-Achse 600 mm Diese 5-Achs SPINNER U-1520 wurde 2012 hergestellt. Sie verfügt über eine Heidenhain iTNC630 Steuerung, eine 3D-Messtaster und sowohl Innen- als auch Luftkühlung. Die Maschine ist mit einem Werkzeugwechsler mit 89 Plätzen ausgestattet und bietet Verfahrwege von X=1520mm, Y=700mm und Z=600mm. Wenn Sie hochwertige Fräsbearbeitungen suchen, ist die SPINNER U-1520 eine ausgezeichnete Wahl. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Fräsen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 13.907 h, en-de-20240625-01 Gedpfsx D Hapex Ag Rjuk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 12.965 h, AXA-VHC-3-3000S-specs-de Gujdpfxjx D E E Ro Ag Rsk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, de1 Gedpfxsx D Eh Ee Ag Reuk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, Steuerungseinheit Marke: HEIDENHAIN Gedpfx Aex D D Tgjg Rsuk Modell: iTNC530 HSCI Hauptantrieb Spindeldrehzahlbereich: 20–28.000 min⁻¹ Spindelmotorleistung: 55/43,5 kW (40/100 % ED) Verfahrwege X-Achse: 1.050 mm Y-Achse: 800 mm Z-Achse: 560 mm Zusätzliche Ausstattung Werkzeugaufnahme: HSK-A63 DIN 69893 / Werkzeugmagazin: 30-fach Scheibenmagazin, 60-fach Pick-up-Kettenmagazin Kratzband-Späneförderer und Maschinenbettreinigung / Separate Wasseraufbereitungsanlage: 980-Liter-Tank und Papierfilter / Hochdruckpumpe: 40 bar / 23 l/min für Innenkühlung durch die Spindel / Erweiterte Spülung für Späneentfernung / Drehbare Inspektionsscheibe / Manuelle Kühlmitteldüse / Interne Druckluftkühlung: durch die Spindel / Vorbereitung für EROWA-Palettenhandlingsystem Dokumentation: Englisch, Ungarisch / Anzeige-Text: Deutsch/Ungarisch / Bildschirmtext: Deutsch/Ungarisch DMG MORI Monitoring: D-ME406* DMG MORI Messenger V4 / DMG MORI Software-Lösungen: DMG MORI Service Agent, DMG MORI NETSERVICE, DMG MORI IoTconnector Dieses 5-Achs-Universal-Bearbeitungszentrum DMG MORI HSC 105 wurde 2021 hergestellt. Es bietet fortschrittliche Möglichkeiten für Präzisionsbearbeitung. Nutzen Sie die Gelegenheit zum Kauf dieses DMG MORI HSC 105 Universal-Bearbeitungszentrums. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Fräsen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Steuerungseinheit Marke SIEMENS Modell SIEMENS 840D Hauptantrieb Anzahl der Achsen 4 Verfahrwege X-Achse 3000 mm Y-Achse 3000 mm Z-Achse 1000 mm Zusätzliche Ausstattung CNC-Portalfräsmaschine mit integrierter Drehfunktion, geeignet für CNC-Bohren, Fräsen, Drehen und Kopfwinkelbearbeitung Diese 4-Achs Unisign UNIPORT 6000 wurde 2007 hergestellt. Als universelles Bearbeitungszentrum bietet sie eine robuste Bauweise und Präzision für unterschiedlichste Bearbeitungsanforderungen. Nutzen Sie die Gelegenheit, dieses Unisign UNIPORT 6000 Universal-Bearbeitungszentrum zu erwerben. Kontaktieren Sie uns für weitere Informationen. Einsatzbereiche Fräsen Gsdpfx Aex D D Dreg Rjuk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, translation-01 Guedex D I Nxopfx Ag Rsk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 36.700 h, Unit Kontrol Merek: SIEMENS Model: Sinumerik 840D Powerline Penggerak Utama Jumlah sumbu: 5 Pergerakan Gerak Sumbu X: 1250 mm Gjdpfx Agex D Npgj Rjuk Gerak Sumbu Y: 880 mm Gerak Sumbu Z: 800 mm Peralatan Jenis dudukan alat: HSK63 Perlengkapan Tambahan Pemindai Inframerah Pengukuran Alat Pistol Pembilas Sirkulasi Pendingin Internal (IKZ): 40 bar Tangki dengan Filter Sabuk Kertas: 900 liter Pusat pemesinan universal 5-sumbu DMG GILDEMEISTER DMC 125U ini diproduksi pada tahun 2004. Ideal untuk tugas pemesinan kompleks dan presisi, menawarkan fleksibilitas dan performa yang tinggi. Pertimbangkan kesempatan untuk membeli pusat pemesinan universal DMG GILDEMEISTER DMC 125U ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi: Milling (Frais)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, de-AT Guedpfx Agex D R Hyo Rjk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, de-5f8e-Main Drive Hauptantrieb Spindeldrehzahlbereich 15.000 U/min Bewegung X-Achsen-Verfahrweg 1.016 mm Y-Achsen-Verfahrweg 635 mm Z-Achsen-Verfahrweg 635 mm Tisch Mindestabstand zwischen vertikaler Spindel und Tisch 102 mm Maximaler Abstand zwischen vertikaler Spindel und Tisch 737 mm Zusätzliche Ausstattung Späneförderer mit Riemenantrieb Exportverpackung 8-fach Palettenpool für UMC Gujdpfx Aex D Smueg Rek UMC-Ersatzwerkzeuglager (1 Stück) Luftdurchblasung durch das Werkzeug (TAB) Zusatz-Kühlmittelfilter Späne-Auffangwannen-Filterset Dieses 5-Achsen-BAZ HAAS UMC-1000SS wurde 2020 gefertigt. Die Maschine verfügt über einen großen Arbeitsraum mit X-, Y- und Z-Verfahrwegen von jeweils 1.016 mm, 635 mm und 635 mm. Ideal für komplexe Geometrien und mehseitige Bearbeitung. Nutzen Sie die Gelegenheit, dieses universelle Bearbeitungszentrum HAAS UMC-1000SS zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Fräsen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Unit Kontrol Merek: SIEMENS Model: 840D Penggerak Utama Rentang kecepatan spindle: 18000 Pergerakan Gerakan Sumbu X: 2700 mm Gerakan Sumbu Y: 2200 mm Gerakan Sumbu Z: 800 mm FPT DINO ini diproduksi pada tahun 2002. Dilengkapi dengan CNC Siemens 840D, ukuran meja 1200x3000 mm, dan pergerakan X2700, Y2200, Z800 mm. Dilengkapi dengan kepala kontinu 5-sumbu dengan elektrospeedle yang mencapai 18.000 RPM dan penukar alat 18 posisi. Pertimbangkan kesempatan untuk membeli pusat pemesinan universal FPT DINO ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Gujdpfxsx D R Nbe Ag Rjk Milling