Robert Mali s.p.

Kondisi: bekas, Tahun pembuatan: 2009, translation_001 Godpfx Agjx H Atts Reuk

Kondisi: baru, panjang total: 2.985 mm, Tahun pembuatan: 2024, kapasitas angkut: 4.500 kg, - Load capacity: 4,500 kg - Dead weight: 4,900 kg - Torsion-resistant housing made of high-strength steel - Front-wheel drive: 2 AC electric motors, 3 kW each, 48V, insulation class H - Drive motor: AC electric motor, 6 kW, 48V - Hydraulic unit: AC electric motor, 9 kW, 48V - Battery: 48V – 600 Ah - Drive control: Electronic speed control, type MOSFET - Steering and drive via rear axle, steering angle 90°/90° - Non-marking superelastic tyres - Front: 2 superelastic 23x10-12” - Rear: 2 superelastic 18x7-8” Gujdpfxox H Arvj Ag Rok - Removable counterweights: 1,360 kg - Proportionally extendable hydraulic boom - Front axle drive with counter-rotating movement - Radio remote control for all crane and boom movements - Battery: 48 V - 600 Ah, 8 working hours - Electronic load limiter - Automatic braking system on all wheels - Manufactured from pre-fabricated and welded steel plates - Boom angle: +60°/-15°

Kondisi: bekas, panjang total: 4.630 mm, Tahun pembuatan: 2024, kapasitas angkut: 13.000 kg, - Drive: Front axle powered by two 8.5 kW 80V AC electric motors, insulation class H. - Battery: 80V – 900 Ah with charge and battery level indicator. Working time up to 8 effective crane operating hours. - Brakes: Automatic brake system acting on all wheels. - Frame: Manufactured from solid sections and welded high-quality steel plates. - Tyres: Front no. 4 superelastic 300x15” Rear no. 2 superelastic 200x15” - Boom: Manufactured from solid sections and welded high-quality steel plates, composed of 4 fully hydraulic telescopic elements. Boom angle: +65°/-5°. Godjx H Arpjpfx Ag Rsuk - Hydraulic System: Powered by a low-noise gear pump (19kW), insulation class H – Hydraulic operation via joystick and lever on the radio remote control – Filters and safety valves – maximum working pressure 22MPa. - Steering: Via rear axle with electric motor. Steering angle +90°/-90°. - Motor pump: Electric motor 19kW 80V AC, insulation class H. - L.M.I.: Electronic load limiter “CE Standard” – With safety lights and the following display indications: Lifted load, maximum permissible load, load percentage indicator, lifting radius, boom angle, selected programme. - Own weight: 14,000 KG, including 4,000 KG removable counterweight. - Removable counterweights: Designed for quick removal and reinstallation to optimise ground and axle loads at any time. - Radio remote control: For all crane and boom movements. If present, also for movements of hydraulic attachments. - Crane classification according to UNI ISO 4301-1: A3

Kondisi: bekas, panjang total: 6.244 mm, Tahun pembuatan: 2024, kapasitas angkut: 35.000 kg, - Penggerak gardan depan dengan gerakan berlawanan - Lengan hidrolik yang dapat diperpanjang secara proporsional - Kemudi 180 derajat melalui gardan belakang - Bobot penyeimbang yang dapat dilepas 8.700 kg - Penggerak roda depan: 2 motor listrik AC 12 kW 96 V, kelas isolasi H - Baterai: 96 V - 1395 Ah, 8 jam kerja - Ban: Depan: 4 superelastis 355/50-20”, Belakang: 4 superelastis 355/50-20” - Sudut kemudi 90°/90° Guedex H Arijpfx Ag Rok - Pembatas beban elektronik - Sistem rem otomatis pada semua roda - Terbuat dari pelat baja pra-fabrikasi dan dilas - Sudut lengan +65°/-3° - Pompa listrik: 1x35 kW - 96 V AC, 1x23 kW - 96 V AC

Kondisi: baru, panjang total: 3.200 mm, Tahun pembuatan: 2023, kapasitas angkut: 4.500 kg, - Load capacity: 4,500 kg - Dead weight: 4,900 kg - Torsion-resistant housing made of high-strength steel - Front-wheel drive: 2 AC electric motors, 3 kW each, 48V, insulation class H Gusdpfx Agox H Arco Rsk - Drive motor: AC electric motor, 6 kW, 48V - Hydraulic unit: AC electric motor, 9 kW, 48V - Battery: 48V – 600 Ah - Drive control: Electronic speed control, type MOSFET - Steering and drive via rear axle, steering angle 90°/90° - Non-marking superelastic tyres - Front: 2 superelastic 23x10-12” - Rear: 2 superelastic 18x7-8” - Removable counterweights: 1,360 kg - Proportionally extendable hydraulic boom - Front axle drive with counter-rotating movement - Radio remote control for all crane and boom movements - Battery: 48 V - 600 Ah, 8 working hours - Electronic load limiter - Automatic braking system on all wheels - Manufactured from pre-fabricated and welded steel plates - Boom angle: +60°/-15°

Kondisi: bekas, panjang total: 5.600 mm, Tahun pembuatan: 2023, kapasitas angkut: 18.000 kg, fi-20240613-014 Gsdpfex H Aq Ssx Ag Reuk

Kondisi: bekas, Tahun pembuatan: 2008, panjang total: 1.960 mm, kapasitas angkut: 350 kg, de-001 Godpfex H Aq Esx Ag Rjuk

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 83.000 km, pendaftaran pertama: 07/2018, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 4x2, jarak roda: 3.875 mm, bahan bakar: diesel, rem: pengereman mesin, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, jumlah tempat duduk: 2, Perlengkapan: komputer bawaan, kopling trailer, kunci diferensial, pendaftaran truk, retarder,

Kondisi: bekas, pendaftaran pertama: 06/1996, panjang total: 13.750 mm, lebar total: 25.500 mm, tinggi total: 38.000 mm, jenis bahan bakar: diesel,

Kondisi: sangat baik (bekas), Übersicht Die Jupiter 35 ist eine leistungsstarke, vollautomatische B2-Laminiermaschine, die speziell für Print-on-Demand-Anwendungen, den Digitaldruck sowie die kommerzielle Offsetproduktion entwickelt wurde. Sie verarbeitet Bögen im Hochformat und meistert problemlos Laufrichtung, versiegelte Materialien und beschichtete Substrate. Die Jupiter 35 ist mit einem Paletten-Sauganleger, einem pneumatisch gesteuerten Einzugswalzensystem sowie versiegelten, ölgeheizten Laminierwalzen ausgestattet und sorgt für eine gleichbleibende, hochwertige Laminierung bei Produktionsgeschwindigkeit. Ein verstellbares Anti-Wellensystem, eine pneumatische Perforiereinheit und eine automatische Bogenauftrennung garantieren flache, sauber vereinzelt und ordentlich auf einem Luftkissen gestapelte Bögen. Ideal für Akzidenzdruckereien, hausinterne Weiterverarbeitungsabteilungen und Lohnveredler vereint die Jupiter 35 Automatisierung, Zuverlässigkeit und professionelle Ergebnisse. Hauptmerkmale - Vollautomatische B2-Laminierung – minimaler Bedienaufwand bei konstanten Ergebnissen - B2-Hochformat-Sauganleger – verarbeitet beschichtete, versiegelte und Digitaldruck-Bögen - Maximales Bogenformat: 540 × 740 mm - Produktionsgeschwindigkeit: bis zu 35 m/min - Paletten-Sauganleger – für lange Auflagen und verschiedene Bogenformate einstellbar - Pneumatisch gesteuerte Einzugswalze & Bogenausfallkontrolle – schützt Folie und Walzen - Versiegelte, ölgeheizte Laminierwalzen – konstante Hitze für gleichmäßige Lamination Gjdpfxsx H Anks Ag Reuk - Schwenkbarer Folien-Abrollträger mit Luftwelle – schneller und einfacher Rollenwechsel - Laufende seitliche Folienverstellung – minimiert Ausschuss - Verstellbare Anti-Wellenschiene & pneumatischer Perforator – gewährleistet glatte Bögen und saubere Trennung - Automatische Auftrenneinheit & luftunterstützte Auslage – reibungsloses Stapeln der Bögen in den Abstapler - Zentrale SPS-Steuerung mit Ferndiagnose – intuitive Bedienung Technische Daten Hersteller D&K Modell Jupiter 35 Max. Bogenformat 540mm x 740mm Min. Bogenformat 205mm x 220mm Empfohlene Materialstärken 115 g/m² bis über 500 g/m² Geschwindigkeit bis zu 35 Meter pro Minute Heizsystem Versiegelte, ölgefüllte Walze Kerndurchmesser 75mm Druckluftbedarf 15 cfm bei 100 psi Tiefstapelanleger Inklusive – 840mm Bogenvereinzeler Inklusive Abstapler (Jogger) Inklusive Stromversorgung 3-Phasen, 380V-415V Maschinengewicht 950kg Abmessungen (L)1950mm x (B)1200mm x (H)1400mm

Kondisi: bekas, Tahun pembuatan: 2012, workpiece: Workpiece diameter: 15 - 70 mm Maximum swing diameter: 150 mm Maximum clamping length: 500 mm Swing diameter over steady rest area: 70 mm Dimensions: 150 x 300 mm Maximum rotational speed: 250 rpm Longitudinal adjustment: manual via sprocket tailstock center: Morse Taper 4 (Junker D75 mm) Clamping pressure: adjustable via hydraulics Traverse path – Z axis: max. 1000 mm Feed Z-axis (CNC controlled) Dimensions: D 205 x 450 mm Flange diameter D 190 mm Gsdpox H Andjfx Ag Reuk Standard hub D 127 mm Drive power: 30 kW Speed control with frequency inverter Maximum rotational speed: 4,400 rpm Type: Borazon (CBN) or Diamond Diameter: 450 mm Bore D 127 mm Peripheral speed: max. 90 m/sec Type: GR-3520-NR Diameter range: D 20 – D 35 mm Dimensions: D 80 x 250 mm Flange D 100 Standard hub D 75 Drive power: 1.8 kW Maximum rotational speed: 24,000 rpm Machine weight approx. 7.0 t In our estimation, the machine is in good condition and can be inspected under power by appointment. Two identical machines are available. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data, specifications and prior sale subject to change and correction.

Kondisi: bekas, Tahun pembuatan: 2006, verfahrweg-x-1760-2x630-yk-z-heidenhain-tnc620-axavhc2-1760s-hu Gujdpfsx H Am Tsx Ag Rek

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, pendaftaran pertama: 08/2022, jenis bahan bakar: diesel, rem: intarder, warna: putih, tipe perpindahan gigi: otomatis, Perlengkapan: ABS, kantung udara,

Kondisi: sangat baik (bekas), konfigurasi gandar: 3 gandar, pendaftaran pertama: 06/2002, suspensi: udara, warna: hitam, Tahun pembuatan: 2002,

Kondisi: bekas, Tahun pembuatan: 2017, rollendurchmesser-530-mm-bandsaw-specs Guodpfox H Amtsx Ag Rsk

Kondisi: baru, daya: 324 kW (440,52 hp), jenis bahan bakar: diesel, berat keseluruhan: 41.000 kg, ukuran ban: 315/80R22,5, konfigurasi gandar: 8x4, jarak roda: 4.775 mm, rem: gas tetap, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja, jumlah tempat duduk: 2, Perlengkapan: ABS, kabin, kebisingan rendah, kunci diferensial, pendingin udara,

Kondisi: bekas, jarak tempuh: 65.500 km, daya: 265 kW (360,30 hp), pendaftaran pertama: 09/2017, jenis bahan bakar: diesel, berat kosong: 11.460 kg, berat muatan maksimum: 14.540 kg, berat keseluruhan: 26.000 kg, konfigurasi gandar: 6x2, jarak roda: 6.100 mm, inspeksi berikutnya (TÜV): 05/2026, rem: pengereman mesin, warna: hitam, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, jumlah tempat duduk: 2, panjang ruang muatan: 9.860 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.370 mm, Perlengkapan: ABS, kabin, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kunci diferensial, kunci sentral, pemanas jok, pendingin udara, program stabilitas elektronik (ESP), sistem immobilizer, spoiler, tail lift,

Kondisi: bekas, jarak tempuh: 29.500 km, daya: 130 kW (176,75 hp), pendaftaran pertama: 04/1998, jenis bahan bakar: diesel, berat kosong: 8.500 kg, berat muatan maksimum: 1.100 kg, berat keseluruhan: 9.600 kg, ukuran ban: 12.5R20, konfigurasi gandar: 4x4, jarak roda: 3.690 mm, warna: merah, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, kelas emisi: euro2, suspensi: baja, jumlah tempat duduk: 3, panjang ruang muatan: 3.000 mm, lebar ruang muat: 2.400 mm, tinggi ruang muatan: 1.750 mm, Perlengkapan: ABS, kabin, kopling trailer, kunci diferensial, lampu depan tambahan, pemanas parkir, penggerak semua roda, tail lift,

Kondisi: bekas, Slot spindle 2 pcs. Number of milling units: 7 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and trimming carriage ..... Machine properly dismantled and stored at our warehouse in 73447 Oberkochen. Video and pictures were taken prior to disassembly. Technical Data Summary (Please inquire separately for any potentially included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for identifying cutting section > Axial adjustment travel: 150 mm, NC axis, electronically infinitely adjustable > Radial adjustment: pneumatic, 8 positions, e.g. for top edge rounding Rounding unit ..... > Position: horizontally bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: mechanically linked with cross-cut saw. > Radial adjustment: pneumatically controlled On/Off electronic length stop ..... > Length: 4,500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported Transfer belt ..... For transfer of parts to longitudinal processing, including double-part separation before infeed to longitudinal processing. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically adjusted to tool diameter Gujdex H Al Nepfx Ag Rek 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Kondisi: baru, Dimensions (L x W): 1400 x 1750 mm Weight: kg Swivelling: yes/no – yes RUCHSER Assembly Tilting Table RU-MKS 1.4 ----- Universally usable work table, e.g. for frame assembly, roller shutter box assembly, glazing bars, sash fitting, and glazing. Equipment, alternative/optional equipment available upon request! Pos. 1.0: Article No.: 8820000 RU-MKS-1.4 Assembly Tilting Table Basic dimensions: 1400 x 1750 mm, extended: 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one fixed on the upper extension, covered with felt. Support surface with width and height/depth extension. Pneumatic tilting mechanism, load capacity 130 kg. Operation via foot pedal. Roller conveyor manually foldable and laterally extendable from 1400–2500 mm; roller length 140 mm (closed). Roller conveyor height in vertical table position adjustable from 300–380 mm, working height (horizontal) adjustable from 920–970 mm. !For safety reasons, at least one flat clamping cylinder must be ordered! Pos. 1.1: Article No.: 5582 Pneumatic swivel mechanism for roller conveyor for MKS Pos. 1.2: Article No.: 21127 Support bar 1400 mm non-extendable for RU-MKS Gusdpfx Agex H Al Ae Rsk Pos. 1.3: Article No.: 5585 360° rotary mechanism with pneumatic locking in 180° increments Rotary brake operable from both sides When using the rotary mechanism, the minimum roller conveyor height of the MKS table increases to 330 mm Pos. 1.4: Article No.: 6455-01 6 storage boxes, each with 2 compartments, mounted swivellable; for RU-MKS Pos. 1.5: Article No.: 5597-10 Travel mechanism for semi-circular running rail for RU-MKS-P4 Operated by foot pedal, mounted on the roller conveyor side. Pos. 1.6: Article No.: 6354-6 3 dual meter semi-circular running rails 30 x 10 mm Pos. 1.7: Article No.: 5193-1 Flat clamping cylinder with hand valve, clamping range 130 mm, retractable mounted on support bar, with felt on contact side, installation left or right – please specify. Pos. 1.8: Article No.: 5584 Lifting device 450 mm for working on vertically standing elements. Operated by foot pedal. Maximum load capacity: 200 kg for RU-MKS...-1.4 and 140 kg for RU-MKS...-2. Pos. 99.1 Packaging on pallet ----- Total price for this configuration: on request! Video and PDF brochure attached. (Technical specifications according to manufacturer – without guarantee!)

Kondisi: bekas, Tahun pembuatan: 2017, de-arbeitsbreite-technische-daten Gusdpjx H Alvsfx Ag Rsk

Kondisi: baru, Tahun pembuatan: 2022, 1 Guodpfx Asx H Alijg Rsk

Kondisi: baik (bekas), Tahun pembuatan: 2000, Sheet width 2520 mm Sheet thickness 4.0 mm steel Sheet thickness for stainless steel 2.0 mm Upper beam adjustment 250 mm Adjustment speed 100 mm/sec Bending beam adjustment 80.0 mm Bending speed 120 degrees/sec Compressed air 6.0 bar Working height 869 mm Control POS 2000 Voltage 400 V Total power requirement 6.0 kW Guedpfxjx H Alce Ag Rok Weight 4100 kg Dimensions L-W-H 4120 x 2400 x 2090 mm Current new price ~ €90,000 From a maintenance workshop With very good equipment (!!) New touch display installed in 2023 Equipment: - CNC electro-motor driven universal folding machine * High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - SCHRÖDER CNC control model POS 2000 * Control panel at the front right (operable with PC mouse) * Touch display renewed in 2023 * Color display * USB interface * Automatic blank calculation * Material and tool library * Precise bending simulation * Operating system Windows XP * Swiveling operation, front right - Servo inverter-controlled drives * For folding/upper beam and electric back gauge - CNC motor-driven lower beam adjustment - CNC electro-motor driven back gauge * Travel speed 300 mm/sec. * With rear sheet support - 1x free-moving double foot switch - Operating instructions (PDF) * Special accessories included: - SCHRÖDER segmented gooseneck tooling (top)

Kondisi: bekas, Bohrleistung-in-Stahl-Durchmesser-40mm-PL7 Gjdox H Ak Sjpfx Ag Rouk

Kondisi: bekas, Tahun pembuatan: 1988, Lebar potong: 5300 mm; Tinggi pemangkasan: 1950 mm; Kedalaman potong: 80 mm; Unit gergaji dapat diputar: 90°; Daya motor: 4,6 kW; Kecepatan putar mata gergaji: sekitar 4.420/menit; Diameter mata gergaji: 300 mm; Berat: sekitar 1200 kg. Lokasi gudang: Nattheim. Gusdpfx Ajx H Ak Eeg Rjk