Eti France

Tahun pembuatan: 1989, Kondisi: bekas, Mesin bekas Tahun pembuatan: 1989 Data teknis: Kepala bor 4-spindel dengan penjepit tekan, jarak: 52/5,5/32 mm Kepala bor deret 7-spindel, jarak 32 mm dengan pin pemati termasuk pengaturan kedalaman bor termasuk perpanjangan stop termasuk stop lipat Koneksi: 380 V Dimensi: 550x750x790 mm tanpa stop Lokasi: Hochheim Ketersediaan: segera Fpsdpfx Aexavraedqon

Tahun pembuatan: 2025, Kondisi: baru, new machine year of manufacture: 2025 features and technical specifications: complete in standard version with: - sturdy, torsion-resistant frame made of steel, welded and bolted construction - upper slat press beam with 6 elements, lateral slat press beam with 5 elements - slat press beams with field-proven tolerance compensation (Ganner system) for tightly compressed carcass joints - counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick coated bearing plates - continuous pressing surface with a height of 95 mm at the lower vertical press beam - electric motor adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance carriage nuts with grease reservoir - pressing is performed electromechanically via 2 separate worm gear motors (2 x 0.75 kW) - the pressing force of the press beams is infinitely electronically adjustable by 2 potentiometers and controlled via frequency inverters, making the pressing force control completely wear-free - pressing force for horizontal press beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) - pressing force for vertical press beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - pressing and adjustment speed of the press beams with fine positioning, via 3-step selector switch 5 / 10 / 25 mm/sec - inching operation for precise positioning of both press beams, e.g. for low pressing forces, drawers, and carcasses at 45° - very simple operation via 6 separate pushbuttons, 8 movement sequences selectable via control system - freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams Fpedew Nafkopfx Adqon - post-press function to increase or reduce the pressing force during the pressing process - working height/feeding height: 300 mm - working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm including extra charge for rapid traverse speed for quick positioning of the press beams, controlled by automatic workpiece detection with sensors in the press beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special parts including set of machine feet for 500 mm working height location: flörsheim availability: short notice

Tahun pembuatan: 2025, Kondisi: baru, New machine Year of manufacture: 2025 Features and Technical Data: Standard configuration: - Robust machine base - Dowel system for: - Dowel diameter: 8 mm - Dowel length: 35 mm (factory setting, adjustable from 30 to 40 mm) Fpsdjwx Aadjpfx Adqsn - Dowel protrusion: 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free insertion gun - Vibratory feeder for dowel transportation - Dowel diameter and length monitoring with Auto-DL-Selekt system - Water supply system for pre-glued dowels: - Water tank (stainless steel, 7.5 L) - Closed water system with 6 bar water pressure and spray nozzle - Electronic controls featuring: - Main switch On/Off - Program selector switch for Water / Water + Insertion - Potentiometer for dowel feed via vibratory feeder - Potentiometer for water injection volume - Indicator light for minimum water level in tank - Chassis - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for counter hole processing: 1 unit HoKuTech | DübelJet with LeimJet expansion kit Including mounting/connectors for use in the DübelJet Including height-adjustable support for glue hose Including: 1 HoKuTech | LeimJet Glue application device for counter hole processing Suitable for PVAc glues up to 75,000 mPas viscosity Incl. dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Tahun pembuatan: 2025, Kondisi: baru, New machine Year of manufacture: 2025 • Robust, space-saving double wide-belt sander designed for the highest demands • Constant working height due to upper section adjustment • Working width: 1350 mm • Max. workpiece thickness: 205 mm (up to 18.5 kW main drive motor) • Sanding belt dimensions: 1350 x 2000 mm 1st Unit "R": Contact Roller - Grooved rubber contact roller, 80 Sh hardness - Infinitely adjustable contact roller height via touch screen - Motorized raising/lowering of contact roller depending on aggregate selection 2nd Unit "Ed-L": Diagonal Sanding Pad - Entire sanding unit tiltable by 10° - Electronic sanding pad with 22 mm segment width (swiveling special version), with variable edge pressure, automatic pressure control and storage of sanding pad segments - Infinitely adjustable sanding belt speed (PLC storage)* - Additional sanding pad insert • Main Motors - 1st Unit: 18.5 kW (25 HP) / 400 V/50 Hz - 2nd Unit: 11 kW (15 HP) / 400 V/50 Hz • Workpiece Feed - Fabric-reinforced rubber conveyor belt - Rubber-coated belt drive roller - Motor: 2.2 kW (3 HP) / 400 V/50 Hz - Speed: infinitely variable from 3 to 15 m/min Fjdswt E Utspfx Adqjpn • Vacuum Device - Located on feed table - Additional perforation of conveyor belt over 200 mm - Vacuum generator: 2.2 kW (3 HP) / 400 V/50 Hz • Sanding Belt Cleaning - Air knife for cleaning sanding belt in the 2nd unit "Ed-L", automatically activated, with extraction ducts and driven by the vacuum generator from the vacuum table via vacuum return air, including diverter valves • Pressure Elements - Infeed: parallel spring-loaded, ground steel pressure roller Ø 50 mm - Between units: rubberized pressure roller Ø 50 mm - Outfeed: rubberized pressure roller Ø 50 mm • Standard Equipment - Motorized, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, control, and oscillation, compressed air consumption approx. 4 l/min - Maximum safety with automatic emergency stop using a disc brake in case of belt breakage, etc. - Complete electrical system with contactor control; automatic star-delta starter for main motor, motor protection, and ammeter for monitoring material removal - Automatic thickness adjustment across the full working width - Workpiece overthickness protection with immediate feed stop and automatic lifting - Electronic compensation of sanding belt grit size - Infinitely variable regulation of material removal - Electronic feed speed control at the operator panel, stepless 3–15 m/min - PLC control/programming with color touch screen and TEACH-IN memory (single-button storage based on sanding result – no manual data entry required) - Pneumatic conveyor belt guidance control - Workpiece support with infeed and outfeed rollers - ENORMATIC: Fully automated quick setting and feed activation - eco* energy-saving mode - Error diagnostics - Order and operating hour counter, square meter measurement, and visualization of belt wear - High-quality, swivel-mounted Plexiglas control panel with LAN and USB connection - 10'' touch screen with Industry 4.0 control - Prepared for aggregate-specific extraction flap control Machine supplied ready for operation in INTERMEDIATE LACQUER SANDING version (1350-REd-L) Additional equipment for “INTERMEDIATE LACQUER SANDING” version on the 2nd unit:

Tahun pembuatan: 1971, Kondisi: bekas, nomor mesin/kendaraan: 37919, Bench drilling machine IXION BST 13 Year of manufacture: 1971 – Serial No. 37919 Technical details: Dimensions: 220 x 400 x 820 mm Weight: 50 kg Online video inspection via Skype video possible. We would be pleased to welcome your visit – more machines in stock. Available immediately – inspection possible. In stock in Emskirchen / Nuremberg – testing possible. Fodpfxoupy Tts Adqjpn

Kondisi: bekas, Mini excavator Fsdpfst Drmhex Adqepn Online video inspection via Skype video We would be delighted to welcome your visit – more machines in stock Available immediately – Can be inspected Located in Emskirchen / Nuremberg – Can be tested

Kondisi: bekas, nomor mesin/kendaraan: 19013, Kombinierte Kopierfräsmaschine – Drehmaschine MICHÄL KÄMPF Online-Videoinspektion per Skype-Video möglich. Wir freuen uns sehr auf Ihren Besuch – weitere Maschinen auf Lager. Sofort verfügbar – Besichtigung möglich. Fpodpfxeh Axryj Adqen Lagerstandort: Emskirchen / Nürnberg – Test vor Ort möglich.

Tahun pembuatan: 1982, Kondisi: bekas,

Tahun pembuatan: 2003, Kondisi: bekas, The Pbt 25 pc 200 machine was received as a trade-in and is truly in mint condition! The hour meter reads only 622 hours! The photos speak for themselves. JWV Service is the importer for the Netherlands and Belgium of PBT profile bending machines and dealer for, among others, Meba bandsaws, Faccin plate rolling machines, and various other brands. The team at JWV Service has 25 years of experience in troubleshooting and overhauling metalworking machinery. Visit our website for more machines. Fsdpof Rih Dsfx Adqepn

Tahun pembuatan: 2016, Kondisi: bekas, Various aluminium saw machines in stock Fpsdpfx Asf Rihvedqjn