Motor listrik 0,25 kW 670 rpm

AEG AM80NY8

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (LxWxH): 1,414 x 503 x 1,350 mm (without connections in continuous bypass) Weight: approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control and regulation unit: Smart Controller (7" touch display) - Heater control via solid state relays - Control cabinet IP54 - Cooling controlled by solenoid valve - Flow measurement by differential pressure method - Bypass between supply and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by detection of heater surface temperature and flow rate Gedpfx Aeg Ey Rfeg Rekf - Dirt filter in cooling water inlet and in return of circulation system - Monitoring of supply temperature by electronic safety temperature limiter - External oil filler neck - DILO-type fittings on internal piping connections (except pump connections) - At 350°C: Continuous bypass, including bellows valves - Connection for nitrogen blanket with manometer and safety valve set to 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are specified in quotations or order confirmations.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, panjang umpan sumbu Y: 6.000 mm, Tipping trough for logs up to 6 m in length. Available from September 2024. Godpsr Iig Dsfx Ag Rjkf

Tahun pembuatan: 1997, Kondisi: diremajakan ulang (bekas), 2 pieces process design volute casing pumps 1 unit fully overhauled; pump and motor bearings replaced with new ones. Mechanical seal overhauled by specialist company. All gaskets replaced. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: Double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: Closed two-channel impeller Impeller diameter: 277 mm Bearing type: Rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: Oil Oil level monitoring for lubrication Materials: Pump casing: Duplex stainless steel Noridur 1.4593 (9.4460) Wear plate: Duplex stainless steel Noridur 1.4593 (9.4460) Discharge cover: Duplex stainless steel Noridur 1.4593 (9.4460) Shaft: Tempered steel C45+N Impeller: Duplex stainless steel Noridur 1.4593 (9.4460) Bearing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex stainless steel 1.4462 Suction nozzle nominal diameter: DN 80 Gkjdpfx Aeiuznujg Rsf Discharge nozzle nominal diameter: DN 40 Nominal pressure (suction): PN 10 Nominal pressure (discharge): PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Rated power (P2): 7.50 kW Insulation class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is particularly suitable for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg Godpfx Ageg Ezarj Rskf EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Gjdpfxsrigxys Ag Rekf Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition

Kondisi: bekas, Hydraulic power unit, hydraulic pump, universal power pack -Manufacturer: H+L, hydraulic power unit for hydraulic punch -Type: DK52 1-6-250P-391K -Motor: Junginger 5.5 kW / 1455 rpm -Pressure gauge: up to 250 bar -Accumulator: Hydac 2.5 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 540/630/H1210 mm Gksdpfx Ajf Tdt Iog Rjf -Weight: 198 kg

Tahun pembuatan: 2023, jam operasional: 11 h, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: MA0144_1922, Exhibition Model: Gkjdpfx Aoh Ey Rceg Rjf Screw Compressor Kaeser SX 8 (10 bar) with SIGMA Control 2 Year of manufacture: 2023 Operating hours: 1 h Technical Data: Free air delivery at 7.5 bar: 670 l/min Motor power: 5.5 kW Electrical connection: 400 V / 3 / 50 Hz Dimensions (W x D x H): 590 x 632 x 970 mm Weight: 155 kg Compressed air connection: G 3/4" Sound pressure level: 64 dB(A) Visit our showroom in Erlangen. On over 450 m² of exhibition space, you will find a large selection of used and new compressors.

Kondisi: baru, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg EQUIPMENT HIGHLIGHTS: • Smart Controller Plus 7" touch / Industry 4.0 capable • Flow metering with adjustable flow alarms • Return temperature display • Frequency converter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector, 20mA/TTY • Connection for external PT100 temperature sensor for tool temperature measurement and display • Continuous bypass of the heat exchanger using a 3-way valve to reduce scaling in the heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Boost pump for system filling at high temperatures • Fill mode can be switched from cooling water to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. Gedpfx Agsftm Hrs Rokf *This unit complies with European directives. Other directives and standards are fulfilled only if specifically stated in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M-900iA/260L R-30iA, kapasitas angkut: 260 kg, jangkauan lengan: 3.100 mm, produsen pengendali: Fanuc, model controller: R-30iA, produsen teach pendant: Fanuc, Perlengkapan: dokumentasi / manual, Robotic Industri IRS Robotics® Rekondisi Termasuk garansi kami dan evaluasi Protokol 77-Poin terperinci yang dilakukan oleh insinyur robotika internal kami. Merek: FANUC Tipe: M-900iA/260L Pengendali: R-30iA Kapasitas angkat: 260 kg Jangkauan: 3,1 m Gjdpep T Umqefx Ag Rokf Tujuan umum: Lengan Panjang Kapasitas Berat Bobot robot: 1800 kg Waktu pengiriman: Sesuai kesepakatan bersama IRS Robotics® rekondisi: 77-Poin Protokol - diuji sepenuhnya di bench test kami, oli/grease baru, baterai baru, dibersihkan dan dicat sepenuhnya sesuai warna RAL pilihan Anda. Termasuk Pengukuran Status Akurasi (repeatability, akurasi, backlash) Tentang kami: Bisnis harian kami adalah pengiriman robot A-Brand rekondisi: ABB – KUKA – ABB – YASKAWA. Sejak 2002. Pengiriman ke seluruh dunia.

Kondisi: siap digunakan (bekas), An air-conditioned Aztech office and commercial container is available. Thermal transmittance (U-value): approx. 0.38W-0.46W/m²K, floor load capacity: approx. 100kg/m², internal height: approx. 2,500mm, external dimensions (L/W/H): approx. 3,000mm/3,000mm/2,600mm, weight: approx. 800kg. Documentation is available. On-site inspection is possible. Gjdpsw D Eubofx Ag Rekf