Mesin kawat EDM

AGIE Classic 2S

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, AGIECUT Classic 2S Year of manufacture: 2006 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (in water bath) / 450 kg (without bath) Ijdpfx Aeuzvkgja Nstb Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER hand box for convenient setup AGIE IPG generator AGIEVISION control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled upon receipt of order. Afterwards, a test cut is performed with optimal surface finish for acceptance. You will receive a 6-month warranty on the machine. Commissioning and on-site training can be offered upon request.

Kondisi: baik (bekas), Tahun pembuatan: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Turret: Number of tool stations: 12 pos. Number of driven tool stations: 12 pos. Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travel distances: X-axis: 160 mm Z-axis: 450 mm Rapid traverse: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 rpm Max. torque C: 155 Nm Total power requirement Machine weight approx.: 3.7 t Space requirements approx.: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Itjdpfxjv Drigo Aa Njb Chip conveyor Oil and emulsion mist extractor with electrostatic filter

Kondisi: bekas, Tahun pembuatan: 2003, Wire EDM machines Travel X: 350 mm Travel Y: 250 mm Travel Z: 256 mm Itsdsw Ekr Ijpfx Aa Njb Max. workpiece size X: 750 mm Max. workpiece size Y: 550 mm Max. workpiece size Z: 250 mm Max. workpiece weight: 450 kg with automatic wire threading

Kondisi: bekas, Tahun pembuatan: 2004, Wire EDM machines / Electrical Discharge Machines Travel X: 350 mm Travel Y: 250 mm Travel Z: 256 mm Max. workpiece size X: 750 mm Max. workpiece size Y: 550 mm Max. workpiece size Z: 250 mm Max. workpiece weight: 200 kg Iedpfxjwf I Imj Aa Netb Cutting in water bath Chiller The machine has been serviced annually by the manufacturer.

Kondisi: bekas, CNC lathe with Y-axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T - Spindle nose: ASA 5 - Main spindle power: 15 kW - Self-centering diameter: 175 mm - ASA 5 spindle connection - Bar capacity: 52 mm - Turning diameter: 230 mm - Turning length: 500 mm - Max. spindle speed: 5,000 rpm - Number of tool turrets: 1 - Number of tool stations on first turret: 12 - Number of driven tool stations on first turret: 12 - First turret tooling system: VDI 30 - X-axis travel: 160 mm - Y-axis travel: ±32 mm - Z-axis travel: 550 mm - Rapid traverse rate (X/Y/Z): 30 m/min - Sub-spindle: yes - Sub-spindle nose: ASA 5 - Max. sub-spindle speed: 5,000 rpm - Sub-spindle power: 9 kW Itedpfx Aaeqn E U Ts Nsb - Sub-spindle bar capacity: 30 mm - Bar loader model and brand: LNS with single bar tube - Chip conveyor: belt type - Tool presetting: yes - Year: 2000 The machine is in our warehouse in Gussago (BS), under power. Mimu Machine Tools Italy

Kondisi: baik (bekas), Tahun pembuatan: 2003, In good technical condition and fully functional. Year of manufacture: 2003. X-axis: 350 mm. Y-axis: 250 mm. Itjdpju Tq Hwsfx Aa Neb Z-axis: 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Machine weight: approx. 2600 kg.

Kondisi: siap digunakan (bekas), X/Y/Z/U/V travel: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Ijdpouqacksfx Aa Njtb

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, daya laser: 12.000 W, ketebalan pelat baja (maks.): 80 mm, ketebalan lembaran kuningan (maks.): 80 mm, panjang meja: 3.000 mm, lebar meja: 1.500 mm, jarak pergerakan sumbu X: 1.550 mm, jarak lintasan sumbu Y: 3.050 mm, jarak gerak sumbu Z: 290 mm, berat benda kerja (maks.): 1.400 kg, tegangan masuk: 380 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, panjang total: 9.100 mm, lebar total: 3.120 mm, tinggi total: 2.200 mm, masa garansi: 24 bulan, jangkauan kerja: 3.015 mm, Perlengkapan: alat penukar nosel, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, Brand new Full-Cover Fiber Laser Cutting Machine | GS-CE/ GS-CE PRO Series | 3,000–60,000 W MACHINE AVAILABLE IN STOCK This FULLY ENCLOSED FIBER LASER CUTTING MACHINE from the GS-CE Series delivers maximum safety in metal cutting operations. Thanks to its full enclosure and observation window made of protective glass, you can monitor the process while avoiding hazards such as laser radiation, sparks, and more. The machine features a fast-exchange table, allowing table changes in just 10 seconds. This is your ideal solution for safe and efficient metal cutting! Working table sizes: 3000 mm × 1500 mm, 4000 mm × 1500 mm, 6000 mm × 1500 mm, 6000 mm × 2500 mm; Laser power: 6 kW–80 kW CNC system: FSCUT Max. acceleration: 4G BOCI cutting head Intelligent anti-collision function Automatic lubrication Schneider relay Laser fault alarm Chiller alarm Laser protective glass Water chiller TÜV CE certificate Optional feature: automatic loading and unloading system The control unit supports graphic formats: AI, BMP, DST, DWG, DXF, DXP External programming System complete incl. chiller, extraction system, and safety light barriers Itedpfx Aoub Nwdea Nob Showroom machine, as new

Kondisi: baik (bekas), Tahun pembuatan: 1999, Offered is a used CNC milling machine CHIRON FZ 22 S high speed with Siemens SINUMERIK 840D control system. The machine is already dismantled and ready for loading. Manufacturer: CHIRON - Werke 78532 Tuttlingen Model: FZ 22 S high speed Machine No.: 497-55 Chip conveyor: Knoll 340 K-1/500 Spindle hours: 2,355 h Year of manufacture: 1999 Weight: 6,500 kg Inspection report from 2021 is available X-axis travel: 750 mm Y-axis travel: 520 mm Z-axis travel: 630 mm Spindle taper: SK 40 CNC control: Siemens SINUMERIK 840D Table size: 1,150 x 570 mm Max. table load: 1,200 kg Automatic tool changer: 20 positions Coolant system Operating voltage: 400 V Total power requirement: 32 kVA Space requirements (W x L x H): approx. 2.00 x 3.80 x 3.0 m Itjdpfx Aekr E Nnja Njb The price is net, plus statutory VAT, ex works, loaded on truck.

Kondisi: baik (bekas), Tahun pembuatan: 1998, Battenfeld 600/200 CDC Unlocking force: 4000 kN Clamping force: 60 tons Year of manufacture: 1997 Screw diameter: 30 mm Shot weight approx. 90 g Itodpfx Aog Emvhoa Njb