Mesin kawat EDM

AGIE Excellence 2F eCut

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 508 mm, produsen pengendali: HAAS, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.400 W, This 5-axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideally suited for precision machining, it offers a robust construction and advanced control technology. If you are looking for high-quality milling capabilities, you should consider the HAAS VF 2 SS YT machine we have for sale. Please contact us for further information. Ffsdpfx Aajyaix Ujgjw Additional Equipment • Type: Side-mount Tool Changer (SMTC) / Capacity: 30+1 / Maximum tool diameter (full): 64 mm / Max. tool diameter (adjacent empty): 127 mm / Maximum tool length: 279 mm / Maximum tool weight: 5.0 kg • Tool-to-tool (average): 1.80 s / Chip-to-chip (average): 2.40 s • Included: HRT210 Machine Advantages Technical Machine Benefits • Torque: 122 Nm at 2000 rpm • Drive system: Inline direct drive • Taper: BT40 / CT40 / HSK-A63 • Lubrication: Air-oil injection / Cooling: Liquid-cooled • Maximum cutting feed: 21.2 m/min / Rapid traverse rates on X, Y, Z axes: 35.6 m/min • Coolant tank capacity: 208 l / Coolant pressure through spindle: 21 bar / Air blast through tool: Yes / Chip auger: Yes / Chip tray filter set: Yes / Air blast through window: Yes / Coolant pump: Multistage • Air consumption: 113 l/min at 6.9 bar / Minimum air pressure: 5.5 bar / Air hose connection: 3/8 inch • Standard interface: Ethernet and WiFi / Control memory: 1 GB / Remote monitoring: HaasConnect / High-speed machining: Included / Advanced tool management: Included / Media display (M130): Included / Power-fail detection: Included / Safe run function: Included / Rigid tapping: Included

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 500 mm, rentang pengukuran sumbu Y: 700 mm, rentang pengukuran sumbu Z: 400 mm, Perlengkapan: Pelat tipe tersedia, mt1 Ffjdpfju E Uzxsx Aagsw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel (X-axis): 650 mm Cross travel (Y-axis): 510 mm Vertical travel (Z-axis): 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm Between spindle centre and underside of counter support: 160 mm Ffsdpfjwuurwjx Aagjw Feeds Longitudinal feed: 0–4000 mm/min Cross feed: 0–4000 mm/min Vertical feed: 0–1500 mm/min Rapid Traverse Longitudinal rapid traverse: 4000 mm/min Cross rapid traverse: 4000 mm/min Vertical rapid traverse: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55–3000 rpm Head, swivelling: 0–140° Quill Feed Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Including (not a complete list): • ABENE milling machine • Heidenhain control • Toolholder set • Coolant pump • Levelling feet • Mounting block • Complete operating documentation Precise scope of delivery as shown in photo gallery.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at a height of 400 mm Integrated Collision Protection (ICP) on all 5 axes automatically lowering tank (drop-door) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed up to 340 mm²/min Best surface finish: Ra 0.10 µm Fedpfsw D Accjx Aagofw Available wire diameters: 0.15 to 0.33 mm Machine overall dimensions: 2,600 x 2,600 x 2,340 mm Total machine weight: 3,300 kg The machine will be cleaned, completely overhauled, and function-tested by us upon receipt of order. You will receive a 6-month warranty on the machine. We are happy to offer commissioning of the machine.

Kondisi: bekas, Tahun pembuatan: 2008, Jangkauan gerak: Sumbu X = 350 mm Sumbu Y = 250 mm Sumbu Z = 220 mm termasuk pendingin Berfungsi penuh Fsdpfxjw Swd Aj Aagefw

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° range and continuous B-axis. Equipped with a 10-station pallet magazine and automatic tool changer with 199 positions. Machine is supplied with the following accessories: Fedpfx Aeku A A Hsagjfw Chip conveyor, high-pressure coolant system through the spindle line with separate tank and paper filter.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), kapasitas pendinginan: 56 kW (76,14 hp), jenis pendinginan: air, frekuensi input: 50 Hz, kapasitas pemanasan: 67 kW (91,09 hp), jenis bahan bakar: gas, "SANYO" PANASONIC ECO G gas heat pump air conditioning unit Model: SGP-E190J2GU2W Ffedpfx Aaod Tiu Eegow Engine: Nissan FY5 Power supply: 230 V AC, 1 phase, 50 Hz Maximum electrical power: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure (high side): 30 bar Design pressure (low side): 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 310 mm, Diameter kawat (maks.): 0,3 mm, berat keseluruhan: 3.000 kg, produsen pengendali: FANUC, model controller: RoboCut α-C600iA, jumlah sumbu: 5, diameter kawat (min.): 0,1 mm, This 5-axis FANUC RoboCut alpha C600iA was manufactured in 2015 and features X/Y axis travel of 600 mm × 400 mm and a Z-axis option of up to 410 mm. With support for a maximum workpiece weight of 1,000 kg and equipped with a FANUC Series 31i-W MODEL B CNC for precise control, it is fitted with AI technology for enhanced accuracy and automatic wire threading, making it ideal for detailed machining tasks. Don’t miss the opportunity to purchase this FANUC RoboCut alpha C600iA wire-cut EDM machine. Contact us for more information. • Axis travel: X/Y 600 × 400 mm; Z 310 mm (optional 410 mm); U/V ±100 × ±100 mm • Maximum workpiece size: 1050 × 800 × 310 mm (standard) • Maximum workpiece weight: 1,000 kg • Maximum taper angle: ±30° at 150 mm (optional ±45° at 70 mm) • Positioning/minimum increment: 0.0001 mm • Achievable surface roughness: up to Ra 0.3 µm Fedpfxjx D Duqe Aagjfw • Automatic wire feed (AWF): approx. 10 s under water; automatic rethreading during submerged cutting • AI Corner Control: optimizes cutting speed and flushing at sharp corners • ECO mode: functions to reduce energy and wire consumption • Applications/materials: steel, aluminum, titanium, nickel alloys; tool and mold making, aerospace, medical technology, precision components

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 1.120 h, Aristech control unit (similar to FANUC) Number of axes: 4 Table dimensions: 640 x 470 mm X travel: 425 mm Y travel: 300 mm Z travel: 250 mm Max. workpiece size: 800 x 600 x 250 mm U axis Weight: approx. 3,000 kg Dimensions (LxWxH): 1860 x 2050 x 2100 mm The machine consists of the following units: 1. Wire EDM machine – main unit Ffodpfx Aajvvl Uaogsw 2. CNC control cabinet 3. Water tank + pump 4. Water chiller 5. Transformer No. 1 6. Transformer No. 2 (power supply) Very little used. Still under power.

Kondisi: baik (bekas), Tahun pembuatan: 2003, In good technical condition and fully functional. Year of manufacture: 2003. X-axis: 350 mm. Fjdpju Tq Hwofx Aagefw Y-axis: 250 mm. Z-axis: 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Machine weight: approx. 2600 kg.