Radial drilling machine

AIRCRAFT OPTIradial 5

Kondisi: baik (bekas), Tahun pembuatan: 2007, Kontrol 840 D Sumbu x 2500 mm Sumbu y 2500 mm Sumbu z 1700 mm Kontrol - Siemens Sinumerik 840 D Berat benda kerja maks. - 6000 kg Diameter spindle - 130 mm Jangkauan pinol - 700 mm Taper alat - ISO 50 DIN 69871 - AD Torsi maksimum pada spindle - 1847 Nm Kebutuhan daya total - 65 kW Berat mesin kira-kira 45 t Csdpfxewzyp Us Aaveri Kebutuhan ruang kira-kira 10,9 x 9,3 x 5,7 m

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 2316-3, 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Min./max. drilling radius: 305 / 1005 mm Cedju Et Nbspfx Aavori - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2800 x D 2300 mm - Weight (approx.): 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Vertical T-slots on the left-hand side of the machine

Kondisi: baru, Tahun pembuatan: 2026, kapasitas pengeboran: 40 mm, kedalaman tenggorokan: 1.220 mm, kecepatan spindel (min.): 110 rpm, kecepatan spindel (maks.): 2.900 rpm, berat keseluruhan: 1.710 kg, langkah spindel: 200 mm, penjepit spindle: MK 4, Drilling capacity in St 60: 40 mm Drilling capacity in GG 20: 40 mm Thread cutting (St 60 / GG 20): M 27 / M 36 Tool holder short spindle: MK 4 Distance spindle center / column, min. - max.: approx. 210 - 1220 mm Clamping surface machine table: approx. 1200 x 510 mm T-slots in machine table: number x width: 3 x 18 mm Distance spindle – table, min. - max.: approx. 375 - 675 mm Codpfx Astzkmbsavsri Distance spindle – base plate (= option), min. - max.: approx. 1075 – 1375 mm Spindle stroke: approx. 200 mm Feed rates (4): 0.08 - 0.1 - 0.2 - 0.3 mm/rev Main spindle speed range: infinitely variable 110 - 2900 rpm Dimensions (height x width x depth): approx. 2500 x 1200 x 1710 mm Net weight: approx. 1710 kg Drive power, spindle motor: 400 V, 50 Hz, approx. 2.2 / 4.0 kW

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp Cedpfx Aaevv Spkjvjri • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Cantilever travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z axis): 200 mm Column travel (W axis): 410 mm Distance spindle nose–table (min): 70 mm Distance spindle nose–table (max): 680 mm Distance spindle nose–floor (min): 970 mm Distance spindle nose–floor (max): 1580 mm Drilling radius: 540 - 1590 mm Worktable height: 900 mm Machining Capabilities Max. solid drilling capacity: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant from: 15 – 2000 rpm Feed Drives X-axis AC servo motor: 0.25 kW Y-axis AC servo motor: 0.25 kW Z-axis AC servo motor: 4.50 kW Csdpfxeu Dg D Aj Aavjri W-axis AC servo motor: 2.50 kW Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Feed rates infinitely variable: 5 – 2000 mm/min Accuracy Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging) With 1800 x 600 mm table: 2800 kg CNC Control System Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm Position indication: Cartesian or polar, in absolute or incremental values Units: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram system: yes Machining Cycles Standard software options: Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: Cycles to determine zero points by manual probing of workpieces for: - Any clamped rectangular parts - Any clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges or faces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: bekas, Tahun pembuatan: 2008, 001 Credpfx Asw N S E Neavji

Kondisi: baik (bekas), Tahun pembuatan: 1992, nomor mesin/kendaraan: 2355-2, 24416 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill travel: 150 mm - 18 spindle speeds: 45-2240 rpm - 4 feed rates: 0.1–0.45 mm/rev - Min./max. distance spindle to table: 300 / 700 mm - Drilling radius min./max.: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirements (approx.): W 1300 x H 2500 x D 2300 mm - Weight (approx.): 1500 kg Credpfxoufw S Rs Aavji Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant device - T-slots vertical on the left machine side

Kondisi: baik (bekas), Tahun pembuatan: 1988, Fast radial drilling machine Manufacturer: Donau Model: DR 40 DIGI CONTROL: NC control Year of manufacture: 1988 APPLICATIONS - DRILLING Drilling capacity (steel): 40 mm Max. throat depth: 800 mm SPINDLE / HEAD Spindle speed (min): 335 rpm Spindle speed (max): 1800 rpm Number of gears: 2 Spindle taper: MK 4 SPECIFICATIONS Table size: 1200 x 750 mm ELECTRICAL SPECIFICATIONS Mains voltage: 400 V Mains frequency: 50 Hz DIMENSIONS / WEIGHT Width: 2500 mm Depth: 1250 mm Overall height: 2500 mm Crjdsikvcaepfx Aavoi Weight: 2.6 t Drive power: 6 kW

Kondisi: baik (bekas), Tahun pembuatan: 1983, 3005 Manufacturer: HKS Singen Year of manufacture: 1983 Machine number: 401044 Model: HKS 40 Drilling capacity: 40 mm Spindle mount: MT 4 Speed range: 26 to 1,940 rpm Feed rate: 0.05 to 0.45 mm/rev Table size: 1,520 x 740 mm Clamping surface: 1,370 x 610 mm Arm reach min./max.: 400 / 1,120 mm Stroke: 200 mm Swiveling range: 360° Vertical arm adjustment: mm Horizontal arm adjustment: 720 mm Accessories: Connection power: 6.5 kW Footprint: 1,500 x 1,100 mm Credpfx Aajwu Ilwovoi 2nd plate: 1,500 x 1,000 mm Dimensions: 1,800 x 1,600 x 2,700 mm Weight: 2.3 t

Kondisi: bekas, Tahun pembuatan: 2017, Condition: used Year of manufacture: 2017 Stock number: 3901 Country of origin: China Price: €8,490 In stock: 1 Special price: €6,790 Drilling capacity in steel: 32 mm Spindle taper: MT 4 Arm reach: 300 - 1,000 mm Spindle speeds: 32 - 2,500 (16 steps) rpm Length: 1,760 mm Width: 800 mm Height: 2,080 mm Weight: 1,600 kg Distance table – spindle nose: 530 - 1,000 mm Spindle motor: 2.2 kW Column diameter: 240 mm Quill stroke: 250 mm Lift motor: 0.75 kW Feeds: 0.10 - 1.25 (8 steps) mm/rev Cube table: 600 x 455 x 455 mm Coolant system Machine lamp Crodpfx Aaowiqlpjvji Mechanical clamping for height adjustment and spindle head Electric clamping for arm rotation Machine and equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS Detailed photos & functional videos of the actual condition • LIVE CHECK ON SITE Live test at our facility • DIGITAL DEMONSTRATION Individual live demonstration via video call • RISK-FREE PURCHASE 14-day return policy