Transmisi hidrostatik untuk BIHLER

ALLGAIER 63 / 8804

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Equipment: - 1 right-side gripper feed Ndsdpfetqf Iqex Aivob - 1 double-point eccentric press, 90 kN - 3 standard slide units - 1 narrow slide unit - 1 control shaft Working range: Wire diameter range: 0.5 - 4.0 mm Strip width: up to 60 mm Feed length: up to 270 mm Performance: up to 350 cycles/min

Kondisi: baik (bekas), gaya penekanan: 50 t, panjang langkah: 320 mm, Capacity: 50 tons Throat depth: 225 mm Nodpfxott A T Tj Aivodb Stroke rate: 320 strokes/min Table size: 500 x 800 mm Machine dimensions (LxWxH): 160 x 120 x 260 cm Machine weight: 6 tons

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Load capacity: max. 700 kg Reel diameter: 1,000 mm Ndsdpfsi Hi Swjx Aivjb Coil outside diameter: max. 900 mm Coil inside diameter: 240 - 560 mm Coil width: max. 120 mm

Kondisi: baik (bekas), Tahun pembuatan: 1985, Drive motor: 400 V, 0.55 kW, 2800 rpm Thread diameter range: M 1 - M 6 Nedpfx Aodzud Doivodb Spindle stroke: max. 15 mm Capacity: up to 120 cycles/min

Kondisi: baru, Tahun pembuatan: 2024, 1000 kg load capacity complete set incl. hand and dual foot remote control Height-adjustable welding positioner with 200 mm through-hole Ndedpfx Aior Tr A Uovsb Table diameter 900 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed range from 0.01 - 1.1 rpm Tilting angle up to 135° Hand and dual foot remote control with speed display Very robust construction Chuck available at extra cost, depending on version and size.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, IM-7010 model, year 2018 Type: Measuring head Model with transmitted and reflected light Image sensor: B/W CMOS, 1", 6.6 megapixels Display: LCD monitor, 10.4" (XGA: 1024 × 768) Lens system: Double telecentric lens Image-based measurement Measuring range: Standard measurement mode: 200 mm × 200 mm (4 × R50) Precision measurement mode: 125 × 125 mm Display resolution: 0.1 µm Repeatability (without stage movement): Standard measurement mode: ±1 µm Precision measurement mode: ±0.5 µm With stage movement: Standard measurement mode: ±2 µm Precision measurement mode: ±1.5 µm Measurement accuracy (±2σ): Without stage movement: Standard measurement mode: ±5 µm*1 Precision measurement mode: ±2 µm*2 With stage movement: Standard measurement mode: ± (7 + 0.02l) µm*3 Precision measurement mode: ± (4 + 0.02l) µm*4 External remote input: Potential-free input (with and without contact) External output: I.O./N.G./FAILED/MEASUREMENT Photo-MOS output: Rated load 24 V DC, 0.5 A ON resistance max. 50 mΩ Interface: LAN RJ-45 (10BASE-T/100BASE-TX/1000BASE-T) USB 3.1: 4 ports (rear: 4) USB 2.0 Type A: 2 ports (front: 2) Recording: Internal hard disk 500GB Illumination system Transmitted light: Telecentric transmitted light illumination (green LED) Reflected light: Ring illumination (ring light) with four segments XY object stage: Travel range 100 × 100 mm (motorized) Max. load capacity 5 kg Z-axis travel: 75 mm (motorized) Power supply: Input voltage 100 to 240 V AC, 50/60 Hz Power consumption max. 430 VA Nodpfx Aisyc N Egovodb Environmental resistance: Pollution degree 2 Overvoltage category II Ambient temperature +10 to +35 °C Relative humidity 20 to 80% RH (non-condensing) Weight Approx. 30 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Equipment: - 1 right-hand gripper feed Ndsdpjvuzvdofx Aiveb - 1 two-point eccentric press, 250 kN - 5 slide units Working area: - Wire diameter range: 1.5 – 5.0 mm - Strip width: max. 50 mm - Feed length: max. 200 mm - Output: max. 450 cycles/min

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1002570003, tinggi total: 3.450 mm, penyesuaian silinder hidrolik: 80 mm, tinggi pemasangan: 270 mm, tinggi meja: 1.280 mm, lebar total: 1.700 mm, panjang total: 3.065 mm, lubang tembus di meja: 210 mm, panjang meja: 1.500 mm, lebar meja: 750 mm, gaya penekanan: 63 t, tinggi kabinet kontrol: 2.200 mm, panjang kabinet kontrol: 1.800 mm, lebar kabinet kontrol: 600 mm, penyesuaian langkah: 80 mm, jarak antara tiang: 1.540 mm, lebar kerja: 1.500 mm, jarak antara dudukan samping: 360 mm, jarak antara penyangga: 2.020 mm, berat keseluruhan: 17.000 kg, gaya punching: 63 t, Mesin punching RASTER RST 630-1500 DH dengan kabin peredam suara dan pemantauan alat. Mesin dalam kondisi baik. Jumlah stroke: 30 - 700 1/menit. Mesin dioperasikan dalam satu shift. Mesin dapat dilihat dalam kondisi terhubung listrik. Harga atas permintaan. Ndedpoyyppbjfx Aivjb

Kondisi: sangat baik (bekas), Tahun pembuatan: 1973, Fungsionalitas: berfungsi sepenuhnya, tragfaehigkeit-300kg-coildaten Ndsdpjxtp Eyefx Aivjb

Tahun pembuatan: 1979, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, ALLGAIER gearbox 62/8102 suitable for BIHLER RM 40 Ndodou Dbb Aspfx Aivob