Pengering udara terkompresi 6000 l/mnt

ALMIG ALM 400

Tahun pembuatan: 2021, Kondisi: baru, nomor mesin/kendaraan: TR0054_ALMRD400, en-001 Ksdpfsg Tvngjx Aahjnf

Tahun pembuatan: 2008, Kondisi: bekas, Pressure 315 t Stroke 40-200 mm Strokes per Minute 20-100 spm Slide Adjustment 120 mm Slide Surface 2000x1100 mm Table Surface 2000x1200 mm Die Pass-Through in Table 1700x250 mm Installation Height Bottom, Slide Adjustment Top 500 mm Side Frame Passage 820x650 mm Total Power Requirement 45 kW Machine Weight approx. 44 t Hydraulic Clutch-Brake Combination Hydraulic Overload Protection in Slide Semi-Automatic Stroke Adjustment Motorized Slide Adjustment Frequency-controlled Stroke Rate Central Flow Grease Lubrication for Guides Oil Circulation Lubrication Slide Balancing Cylinders Front/Rear Safety Doors Hydraulic Die Clamping System Extendable Table Plate Hydraulic Roll Block Rails in Table Helmerding EWH800/150 Servo Feeder (V-1341-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-6.0mm, Max. Cross Section: 1600mm² Intermittent Airing, Height Adjustment via Gear Motor Kodperdi Dlofx Aahonf Straightener R-70/800/9-S (R-1343-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-4.0mm, Max. Cross Section: 1600mm² at 450N/mm² Straightening Speed, frequency-controlled up to 25m/min Strip Infeed Aid: Transfer Table with hydraulically adjustable peeling wedge Hold-down hydraulically adjustable Strip Side Guide: 1 pair of lateral roller guides adjustable by handwheel Feed Rollers: 2x rollers Ø140mm, pneumatically adjustable Straightener: 9x rollers Ø70mm, manual adjustment by handwheel Uncoiler HE-4/800/MOT/HYD (H-1342-6518) Strip Width: 100-800mm Max. Load: 4t Coil Inner Diameter: Ø508mm Coil Outer Diameter: Ø1000-1600mm Drive, frequency-controlled Limiting Arms Hydraulic Expansion Hydraulic Pressure Arm

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Knedjhigmbspfx Aahjf Further data will follow shortly or upon request.

Kondisi: bekas, Tahun pembuatan: 2004, Press force 80 t Stroke 16 - 63 mm Strokes per minute 100 - 750 Upright clearance 970 mm Installation height (Stroke + Ram Adjustment at Top) 380 mm Lateral upright pass-through 380 mm Table surface 940 x 910 mm Through-opening in table 770 x 190 mm Table height above floor 1180 mm Ram area 940 x 510 mm Ram adjustment 76 mm Material width 203 mm Material thickness - 6.0 mm Feed length 0 - 120 mm Drive power 37.0 kW Weight 14.50 t Space requirement approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation in accordance with CE standard With infinitely variable three-phase drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil recirculation lubrication Mechanical roller feed Bruderer BBV 205/120 driven by press main shaft/cardanic shaft Guethle CK cantilever brackets Kodpfx Aevuua Noahsnf Optionally, a soundproof cabin can be offered – price upon request

Kondisi: baik (bekas), Tahun pembuatan: 2017, In this offer, you are purchasing used office furniture in good condition. The items were delivered in 2017 and, having seen little use, remain in overall excellent shape. Items for Sale: We also offer complete workstation sets for €450 each. 1x Desk Knodpfeiiv Ikox Aahjf - Manufacturer: FM - 160 x 80 x 76 cm (continuously height-adjustable from 68 cm to 76 cm) - Grey desktop - Aluminium frame 1x Office Chair "Dauphin MagicShape elan" - With armrests - Fully adjustable - Upholstery: Polo grey/black 1x Mobile Pedestal Drawer Unit - Manufacturer: FM - 43.4 x 80 x 59 cm - One materials drawer - 3 steel drawers with soft-close - Lockable, key included Desks: • Approx. 10x desks, Manufacturer FM, 1600 x 800 x 680 to 760 mm (continuously height-adjustable), in light grey. Frame made of aluminium • Approx. 10x folding tables (usable as desks), 1600 x 800 x 720 mm on castors, in light grey. Frame made of aluminium • Approx. 2x round meeting tables, 1000 mm diameter, in light grey. Frame made of aluminium • Approx. 4x high tables, 1600 x 800 x 1300 mm, in arctic white. Frame in white, made of aluminium Chairs: • Approx. 10x Dauphin swivel chairs MagicShapeS elan with armrests and fully adjustable. Upholstered in Polo black, black plastic base • Approx. 44x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ruby red, chrome metal frame • Approx. 52x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ocean blue, chrome metal frame • Approx. 10x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in black, frame in silver • Approx. 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ocean blue, frame in silver • 12x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in red, frame in silver • 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ruby red, frame in silver Storage: • Approx. 16x FM mobile pedestal units, 434 x 800 x 590 mm, with one materials drawer and 3 steel drawers. Body in light grey, aluminium handles Meeting table with 4 conference chairs – €750 net High table with 6 bar stools – €1,500 net Prices may vary slightly depending on the quantity purchased. We are happy to provide a suitable offer upon request. Each item can also be purchased individually. Condition: Please note, these are used furniture items and may show signs of wear (minor scratches or discolorations). Packaging and Shipping: You are welcome to inspect all items during our business hours by appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us directly.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 240 mm, berat keseluruhan: 6.000 kg, kecepatan spindel (maks.): 42.000 rpm, 5-axis HSC Milling Machine Röders RXP500DSC with linear direct drives on all axes and torque drives on the rotary axes. The machine is being completely overhauled, inspected, and calibrated at our facility. The machine will meet new machine tolerance standards upon completion! Traverse paths: X450mm, Y400mm, Z240mm Spindle/Table distance: approx. 315mm - Linear direct drives on all axes – wear-free Knsdjtt Argjpfx Aahof - 19-position tool changer - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully automatic calibration of milling tools (length/diameter/contour/taper angle) as well as wear monitoring, including tool cleaning before measuring - Handheld pendant - Remote maintenance - Automatic 3D probe including calibration sphere in the tool changer - Minimum quantity lubrication - Emulsion cooling - Spindle HSK40E with max. 42,000 rpm - Spindle length compensation - EROWA zero-point clamping system integrated into the machine table - Manual chuck actuation - Automation package for retrofitting the machine with a pallet changer - Handheld pendant Viewing the machine in operational condition is possible at any time. You are also welcome to visit our website or our Hüttmann YouTube channel for more information about the range and quality of our refurbished machines.

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), stanzkraft_220kN_2025_info Knedpfx Aaexddagshjf

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, This degreasing system operates under vacuum (pressure swing process) using either modified alcohols or hydrocarbons. (New machine) 12-month warranty Immediately available from St. Gallen Featuring vacuum-pressure swing technology System process: Spray, immersion, ultrasonic, and vapor degreasing, including vacuum drying. Specifications: Ultrasonic: 2 x 1000 W – 25 kHz Dual fine filter Chamber door made of armored glass 2-tank system, filling volume 400 L Double distillation, residual distillation Automatic oil discharge 3-stage water separation Electropolished chamber for ultra-fine cleaning Screw vacuum pump (latest generation) Loading trolley 2 washing baskets, mesh widths 7 mm and 12 mm 12" touch panel Prepared for automatic loading Kodpfxoqy H H Dj Aahsnf Max. basket size (480 x 320 x 200 h mm) Max. loading weight: 100 kg Machine dimensions: 2400 x 2400 x 3300 h mm Machine weight (basic version): 2500 kg Colour scheme: RAL 9003 (white) RAL 7021 (black)

Kondisi: baru, Tahun pembuatan: 2025, The skyCUBE M / P / SL laser processing center – the new benchmark in laser material processing! (* Price may vary depending on configuration, this is a factory-new laser machine manufactured by us) Laser options available according to your requirements: CO2 laser 150W / 250W / 400W or fiber laser 1500 – 6000W PFEIFER Laser Processing Center skyCUBE Kodpsbnphvsfx Aahenf Processing areas: Mclass = X 1250 x Y 650 x Z 100 mm Pclass = X 1250 x Y 1250 x Z 100 mm SLclass = X 1250 x Y 2550 x Z 100 mm The skyCUBE laser processing center – the new multifunctional laser engraving and cutting machine – makes laser processing easy and highly precise – high-speed, high-quality laser engraving and cutting. Our latest and best multifunctional solution impresses even the most experienced operator, not just with its innovative design. This CO2 laser / fiber laser demonstrates outstanding performance in all industrial applications, serving equally well as a CO2 or fiber engraving laser or as a CO2 or fiber cutting laser. With optional laser power up to 1500W (1.5kW), this CO2 laser device / fiber laser system is highly flexible in your production environment. The skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, ensuring maximum operational safety. Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving a wide range of materials, such as various metals, acrylic, solid wood and wood materials, engineered wood products, paper, cardboard, various plastics and foams, textiles, and much more. The machine’s outstanding build quality, 100% produced in Plauen/Germany, guarantees high working accuracy and consistently high quality from the engineering frame to the laser source. With cutting speeds up to 8000 mm/s and engraving speeds up to 4000 mm/s, the high-end laser technology delivers clean and extremely sharp cut edges as well as precise laser engravings. The ergonomic design with a pull-out worktable simplifies loading operations. A drawer at the base of the machine collects cut material for easy disposal. User-friendly and intuitive – the included skyCUBE PC software (ready for Windows®). A simple, practical user interface adapted to Windows standards allows for quick and efficient operation. The software features high system stability, professional monitoring, advanced machine control, and compatibility with standard file formats. Data output is managed by layers—each layer configured independently, including the definition of processing sequences and methods. Parameters such as laser power and processing speed are automatically stored for each layer and can be reliably recalled from a material database as needed. Laser projects are transferred to the skyCUBE M laser processing center via a LAN/USB interface. Once transferred, these jobs can be executed repeatedly without needing the connected PC to remain on. A modern touch control panel provides access to all system information and functions.

Kondisi: baru, Table length 1590 mm Table width 1490 mm Knedpfxeh Dqb Dj Aahef Table height 840 - 890 mm Machine weight approx. 0.4 t Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Underside ribbed for reinforcement. Including floor mounting Accessories optional! Surface flatness 0.2 - 0.4 mm per 1000 mm. Table can be moved with a pallet truck. Pallet truck not included in the scope of delivery.