Kompresor sekrup

ALMiG Gear 132

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Hfedpfxjhzbipj Aabsf Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), A compressor system from plant manufacturer Rico, comprising two Atlas Copco compressors, two refrigeration dryers, and an oil-water separator system (Beko), also from Atlas Copco, is available. 1) Atlas Copco GA 45 VSD+ screw compressor, year of manufacture: 2020, air flow: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200 mm / 1100 mm / 2000 mm, weight: approx. 860 kg. 2) Atlas Copco GA 45 VSD FF screw compressor, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x Atlas Copco FX 15 refrigerated compressed air dryers, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant charge: 2050 g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900 mm / 750 mm / 1000 mm, weight: approx. 160 kg. 4) Atlas Copco Equalizer 4.0/ES6-MK5 compressor management system, control capacity: 2–6 compressors. 5) Beko ÖWAMAT 15 oil-water separator, throughput capacity range: 6 m³–30 m³/min, oil outlet: DN40, tank volume: 115.5 l, filling volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100 mm / 550 mm / 800 mm, weight: approx. 40 kg. Plant operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible. Hsdpfxexdc Uve Aaboff

Kondisi: bekas, Tahun pembuatan: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Hfodpfx Aaorkgy Uebjf Technical Details - Output: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck finish: 29/25 - Operating hours: 47,000 - The machine has been regularly maintained Machine equipped with: - Sidel elevator for preforms to unwinder - Sidel preform unscrambler & feed system - Sidel oven & blowing station for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request

Kondisi: baru, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! Straightening Press 150 tons with electric motor and additional manual hand operation via lever pump, specifically designed for precision work. Available models: 30t 60t Hfedof Sqckspfx Aabef 100t 150t 200t >200t: on request Special machines: on request Brand new machine! We can also build a custom press according to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can be operated conventionally in electric mode using a lever to raise and lower it. For precision tasks (e.g., pressing bearings, straightening, etc.), the press also features a manual hand pump, allowing you to finely adjust the force manually. The pressure cylinder is mounted on a sliding carriage, which allows it to be laterally shifted. This enables you to fully utilize the maximum frame width. Key features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric or manual - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Pull chains for easy height adjustment - Heavy-duty machine frame - Laterally adjustable cylinder (mounted on sliding carriage) The press can be tested under power at our location. ----- Numerous other workshop presses available in various designs, sizes, and with optional additional equipment! 30, 60, 100, 150, 180, 200 tons. ----- Simply contact us for a non-binding consultation. The stated price is net, plus 19% VAT. All information provided without guarantee. Europe-wide delivery possible! ----- The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place through telecommunications (email, fax, phone, messaging portal). We will first provide you with a non-binding offer, which will include our general terms and conditions and cancellation policy with company information, prior to purchase or conclusion of contract.

Kondisi: baik (bekas), daya: 30 kW (40,79 hp), Tahun pembuatan: 2010, jam operasional: 51.548 h, suhu lingkungan (min.): 3 °C, suhu lingkungan (maks.): 45 °C, tekanan (maks.): 8 batang, kecepatan rotasi (maks.): 2.945 rpm, nomor mesin/kendaraan: 100609.1, Perlengkapan: Pelat tipe tersedia, The Kaeser ASD 57 is an energy-efficient screw compressor designed to provide reliable compressed air supply for industrial applications. It features a compact design and quiet operation. Equipped with advanced Sigma Profile technology and intelligent control, it ensures optimal performance and durability. Technical details: Item number: 100609.1 Serial number: 1941 Year of manufacture: 2010 Rated power: approx. 30 kW Maximum operating overpressure: 8 bar Motor speed: 2,945 rpm Hfsdpfet Iwyuox Aabef Condition: Used (see images and nameplate)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Pelat tipe tersedia, pengering pendingin, Vollcontainerladung gebrauchter elektrischer Schraubenkompressoren für den Export. Verladung des Containers inbegriffen. Hsdpfx Aotp Tzxjabjff

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: API621725, Dijual: Kompresor Atlas COPCO ZR 132 dengan filter, 125 KW Hodpfx Aowrm T Ioabjff

Kondisi: baik (bekas), Tahun pembuatan: 2019, nomor mesin/kendaraan: 24451.19, 25359 Hedpfx Aoxup Rfsaboff

Kondisi: bekas, Tahun pembuatan: 2016, Overview: The complete bottling line for large PET bottles is located in a mineral water plant and was used for filling water. The line has been regularly maintained and is in excellent condition. Capacity: 3,000 bottles/h List of Machines - Blow Molding Machine | Kosme | KSB4RG 2016 | 3,600 bottles/h - Air Conveyor | NTS | 2016 - Rinser - Filler - Capper Monoblock | GyM | MONOBLOC 12/3 PVG | 1995 | 3,000 bph - Cap Feeding Hopper | GyM | 1995 - Handle Applicator | TAS | VA-1150/75C | 2009 | 3,000 bph - Handle Applicator | And&OR | 50SIA5000R8P2-TL | 2009 | 3,000 bph - Labelling Machine | Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4,100 bph Hsdpfjtuyq Rex Aaboff - Batch Coder | MACSA | K-1030PLUS | 2008 - Bottle Inverter / Rotator | GyM | 2001 - Divider | SMI | DIVIPACK 2000 | 2002 - Shrink Packer | SMI | LSK 30F | 2002 | 7,200 bph (30 packs per minute, 2*2 on 2.5L / 2 on 5L)

Tahun pembuatan: 2007, Kondisi: baik (bekas), Danobat CNC Bohr-/Sägeanlage – Baujahr 2007 Einzelner rotierender Bohrspindel. 18 Meter Einlaufrollenbahn. 12 Meter Auslaufrollenbahn. Vorschub durch Klemmeinheit. Quertransporteinrichtung am Einlauf. Quertransporteinrichtung am Auslauf. Kapazität: 750 mm. Sägekapazität: Runde Schnittkapazität (ohne vertikale Spannbacken, Winkel 0 Grad): 520 mm. Rechteckige Schnittkapazität (ohne vertikale Spannbacken, Winkel 0 Grad): 700 mm x 500 mm. Maximale Kapazität mit vertikalen Spannbacken: 700 x 500 mm. Runde Schnittkapazität bei 45 Grad Drehung: 450 mm. Hjdpfsig T Amjx Aabjff Rechteckige Schnittkapazität bei 45 Grad Drehung: 450 x 500 mm.