Mesin bor kolom ALZMETALL AB 34

ALZMETALL AB 34 iTRONIC

Kondisi: baru, Drilling capacity in steel (diameter): 40.0 mm Drilling capacity in cast iron: 45.0 mm Throat depth: 300 mm Drilling stroke: 160 mm Morse taper: 4 MT Table: 615 x 430 mm Speed range: 100 - 1,800 rpm Column diameter: 145 mm Thread cutting M 24 ST60 Thread cutting M 30 GG20 Feed: 0.1-0.2-0.3-0.4 mm/rev Distance spindle / table: 138 / 688 mm Motor power: 1.4 / 2.2 kW Weight: 470 kg Machine height: 1,865 mm NEW ALZMETALL MODEL RANGE 7" TFT LCD display with touch function: * Set spindle speed value * Actual speed display * Integrated drilling depth display * Touch zero-setting function * Virtual drilling depth scale on display * Machine status indicators and warning messages on display * Service information * Selectable operating languages: DE/EN/FR/ES/IT/NL/RU Features: - Thread cutting device * for tapping with stop * up to 6 threads/min (thread cutting capacity depending on spindle speed) * Thread depth adjustable via depth stop * on the TFT LCD display (3 tools) - Continuously variable speed setting via adjustment lever - Electromagnetic feed clutch * with overload protection and electric control * Ergonomic cross-handle switching * Selectable feeds: 0.1-0.2-0.3-0.4 mm/rev - Spindle guard with electrical interlock - Three separate buttons for clockwise, counterclockwise, and stop - Push-button mushroom switch (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise/counterclockwise operation via contactor control - Control voltage: 24 Volt - Protection class: IP 54 - Finish: DD textured paint, signal white RAL 9003, PANTONE 7545c, black Ledsxab Nkjpfx Aahjta - Initial machine oil filling: oil bottle, supplied loose Including special accessories: - 12. LED machine lamp - 24. Coolant system A* integrated in machine base

Tahun pembuatan: 2023, Kondisi: baru, - modern ergonomic design - manual testing process with analog dial gauge (reading accuracy 0.2 HR units) - simple operation and fast testing procedure - test space height approx. 185 mm - test space depth approx. 160 mm - dimensions 545 x 182 x 755 mm Test load ranges: 60 / 100 / 150 kg Test methods: HRA / HRB / HRC Standard scope of delivery: - Hardness tester - Prism support - Flat test table Ø150 mm - Flat test table Ø50 mm - 1/16'' ball holder with ball - 120° Rockwell diamond indenter - Spindle protection Lsdpfxjpbbc He Aahsta - Accessory case

Kondisi: baru, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. The OD pipe deburring machines remove burrs from pipes after cutting. This machine simultaneously removes internal and external burrs from pipes and profiles without requiring rotation of the pipe material. Round, square, rectangular, and various other pipe and profile shapes can be deburred within just a few seconds. Thanks to the rotation of the brush, the operator does not need to rotate the pipe. The pipe clamping system allows for precise insertion of the pipes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container. Ltedod Ixbzspfx Aahsa

Kondisi: sangat baik (bekas), Double spindle, C-axis FANUC 18i-TB control Turning diameter: up to 300 mm Turning length: up to 366 mm Main spindle speed: 30–5,000 rpm Counter spindle speed: 30–6,000 rpm Turret: 12 driven stations C-axis indexing: 0.001 degrees Various accessories Ltjdjwufdqjpfx Aahsa MARCELS MASCHINEN CH

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, MITUTOYO Contracer CV-2100M4 contour measuring instrument Lodpfx Asvun Tpjaheta Measuring range horizontal X = 100 mm Measuring range vertical Z = 50 mm Column travel Z2 = 350 mm Inclination +/- 45° Dimensions (W x D x H): 745 mm x 450 mm x 885 mm Total weight approx. 150 kg Includes PC system Includes cross table 218-001 Includes rotary vise 2028-003

Kondisi: baru, Tahun pembuatan: 2023, nomor mesin/kendaraan: PRJ065958, ALZMETALL bench drilling machine, drilling capacity in steel 16mm Short spindle MK2, spindle stroke: 80mm, throat depth: 190mm, column diameter: 65mm, machine table usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-to-table distance min. / max. 75/357mm, machine table height adjustment via hand crank, machine base plate usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-to-base plate distance min. / max. 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. Ledpfx Aaelubw Ijheta - Infinitely variable speed: 100–2000 rpm Standard features: 5" TFT LCD display with touch function: manual input of target spindle speed, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status and warning messages on display, service information, selectable operating languages DE/EN/FR/ES/IT/NL/RU Single-phase motor 230 Volt, 50 Hz, connection plug pre-installed, cable length 2m, three separate buttons for forward - reverse - stop, Spindle holding via brake function, spindle guard with electric interlock, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, infinitely variable speed adjustment via potentiometer, protection rating IP54, spindle guard with electric interlock, coating: DD structural lacquer signal white RAL 9003, PANTONE 7545c, black includes the following option: LED machine lamp Pos. 12. Delivery time: ex stock Waiblingen Beinstein

Kondisi: baik (bekas), Tahun pembuatan: 2007, Electromagnetic chuck including electronic polarity reversal control device, control unit and keypad complete. Please contact us if you are interested! Ltodpjlbggtofx Aahoa

Kondisi: baru, Model designation Lsdpfxogvkgle Aaheta Shark 281 SXI evo

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1989, Dear Sir or Madam, We offer for sale a partially overhauled Deckel FP1 with 3-axis TNC113 active control, renowned for its straightforward operation. This later model, from year of manufacture 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone a thorough partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect the machine yourself on site. Delivery time: on request Machine number: 2102-xxxx Table: fixed angular table or rotary-tilting table Travel distances: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed: infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital display with active control, infinitely variable feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, machine leveling feet, safety devices (optional) Our service promise to you: Ltedpjpy Eldjfx Aahja - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced beforehand - Upon request, we can deliver your chosen machine either fully or partially overhauled - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further equipment such as safety devices directly - We are happy to take care of shipping and/or installation

Kondisi: baru, ex-demo-promotion--NEW No. 1 unit available for immediate delivery. CE certified warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw suitable for cutting solid bars and small profiles, offering high performance and excellent precision. Its robust frame provides the necessary rigidity and accuracy to the cutting assembly. The blade is powered by a two-speed motor and a special gearbox with a hardened and ground bronze worm gear. The appropriately sized flywheels and robust blade guides are fitted with sealed bearings and adjustable carbide pads. Blade tensioning is managed via an electromechanical micro-switch, which is activated by rotating the blade. Safety features include an accident-prevention device on the flywheel covers and blade, complemented by a swiveling worktable for material support and a vice with rapid approach mechanism. Operation: The cutting cycle starts at the touch of a button: 1. the vice closes and the blade motor is activated; 2. the bow descends for cutting; 3. the bow returns to the start position; 4. the blade motor stops; 5. the vice opens. Manual cutting is also possible. Cutting speed (m/min): 38-77. Blade thickness (mm): 1.2. Cutting range: 45° left to 60° right. Adjustable stop for repetitive cuts. Band coolant electric pump: 0.06 kW. Cutting capacity at 0° (Round, Square, Rectangle): 260 / 250x250 / 220x330 mm. Cutting capacity at 45° left (Round, Square, Rectangle): 225 / 210x210 / 160x225 mm. Cutting capacity at 45° right (Round, Square, Rectangle): 215 / 200x200 / 160x210 mm. Cutting capacity at 60° right (Round, Square, Rectangle): 130 / 130x130 / 130x140 mm. Blade dimensions: 3010x27x0.9 mm. Weight [kg]: 415. Ltjdpjg S Ui Ajfx Aahja