Bor meja

ALZMETALL Alzstar 18-T/S

Kondisi: baru, ALZMETALL Alzstar 18-T/S, Manufacturer: Alzmetall Model: Alzstar 18-T/S Condition: New Drilling capacity in St 60: 18 mm Thread cutting in St 60: M 12 Thread cutting in GG 20: M 14 Short spindle: MK 2 Spindle speed: 225-4,300 rpm Spindle travel: 80 mm Throat depth: 190 mm Column diameter: 65 mm Machine table – usable area: 300x240 mm T-slot number – width – spacing: 2 x 12 x 80 mm Distance spindle to machine table min./max.: 75/357 mm Machine base plate usable area: 300x240 mm T-slot number – width – spacing: 2 x 12 x 80 mm Distance spindle to base plate min./max.: 437/437 mm Manual feed Cjdpfx Aey S Au Uoqxsgw Machine table height adjustment: Hand crank Total power requirement: 0.37/0.55 kW Machine height: 840 mm Weight: 110 kg Standard equipment: - Main switch with lockable motor protection switch - Reversing switch for clockwise & counterclockwise rotation - Infinitely variable speed adjustment - Protection class IP 54 - Emergency stop mushroom pushbutton (locking) - Spindle guard with electrical safety interlock Optional: - LED machine light - Table extension - Drill chuck 1-13 mm or 3-16 mm Available immediately. For self-collection. Forklift available. Shipping possible. Errors, changes, and prior sale excepted. Additional Alzmetall bench and pillar drilling machines always in stock!

Kondisi: baru, EN: Precise, smooth-running standard drilling machine, high accuracy and quality. Drill table adjustable via rack and swivelable around the column. Full motor protection, star handle. Mains connection 230 V. Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle: MT 2 Drilling depth: 80 mm Cgedpfx Aqjda Nqxjxsw Throat: 180 mm Distance spindle/table: up to 380 mm Table size: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Frequency-controlled three-phase motor: 1.1 kW Equipment: - Forward/reverse selector switch for thread cutting - Full motor protection - Star handle In stock, immediately available

Kondisi: baru, Drilling capacity in steel (diameter): 18.0 mm Throat depth: 190 mm Drilling stroke: 80 mm Morse taper: 2 short spindle MT Cgodpfoxaay Ujx Aqxjw Spindle speed: 225 - 4,300 rpm Operating voltage: 400 V / 50 Hz Table size: 300 x 240 mm Column diameter: 65 mm Motor power: 0.37 / 0.55 kW Weight: 110 kg Equipment/features: - Wide spindle speed range - Infinitely variable speed control - Machined base plate - Electrically interlocked spindle guard - Main switch with lockable motor protection switch - Forward/reverse switch - Operating manual in German

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: PRJ069841, ALZMETALL bench drill Drilling capacity in steel: 14mm Cgodpfx Aqslub Htoxsw Short taper spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable area: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-to-table distance min. / max. 75/357mm, machine table height adjustment via hand crank, machine baseplate usable area: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-to-baseplate distance min. / max. 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. - Infinitely variable speed 230-4000 rpm Standard features: 5" TFT LCD display with touch function: manual input of target spindle speed, actual speed display, integrated drilling depth indicator with touch zero-point transfer, virtual depth gauge on the display, machine status and warning messages in the display, service information, selectable operating languages DE/EN/FR/ES/IT/NL/RU Single-phase motor 230 Volt, 50 Hz, plug pre-assembled, cable length 2m, three separate buttons for forward - reverse - stop, spindle brake function, spindle guard with electrical interlock, lockable main switch, mushroom head emergency stop button (latching), infinitely variable speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Delivery time: ex stock Waiblingen Beinstein.

Kondisi: baru, Table length 1220 mm Table width 760 mm Table height 910 mm Weight 226 kg Nitrided welding table workbench + 66 accessories included Benefit from the best of both worlds: the functionality and quality of GERD WOLFF welding tables combined with the mobility of a work cart. The workbench features a replaceable, robust tabletop designed to accommodate all TM-fixture components with a diameter of approximately 1.6 cm. This enables you to create the ultimate, high-performance, and compact mobile workstations. Increase your clamping and positioning capabilities and get ready for new projects with the GERD WOLFF welding table workbench + fixture set. The GERD WOLFF welding table workbench with fixture set is a turnkey system for clamping and positioning in welding and manufacturing. Clamp and position at any point on the reversible, double-sided, precision-ground, nitrided (heat-treated) tabletop (size: 121.92 x 76.2 cm) to ensure accuracy in all your setups. Technical specifications Hole diameter: approx. 1.6 cm Grid pattern: approx. 5 cm x 5 cm Tabletop size: 121.92 cm x 76.2 cm Tabletop thickness: approx. 1.6 cm ±0.01 cm Table flatness: ±0.0381 cm per 60.96 cm x 60.96 cm Table height: approx. 91 cm Static load capacity: approx. 680.4 kg Gross weight: approx. 222.26 kg Fixture set (5/8-inch = 1.5875 cm) 2 x Inserta clamps, suitable for 1.5875 cm holes (UDN5150) 2 x Side clamps, suitable for 1.5875 cm holes 2 x Inserta pliers - suitable for 1.5875 cm holes (PTT522K) 2 x Inserta pliers - suitable for 1.5875 cm holes (PTT634K) 2 x Magnetic V-pads for the tabletop 2 x Positioning pins, suitable for 1.5875 cm holes 2 x Angle brackets, 1.5875 cm holes (T50305) 2 x Angle brackets, 1.5875 cm holes (T50304) 4 x Stops, suitable for 1.5875 cm holes (T54203) Cjdpfx Aqoxqrhloxegw 4 x Stops, suitable for 1.5875 cm holes (T54205) 4 x V-block spacers, suitable for 1.5875 cm holes 8 x D-stop rods, 1.5875 cm holes 8 x V-blocks, suitable for 1.5875 cm holes 10 x Ball lock screws, suitable for 1.5875 cm holes 12 x Magnetic support pins

Kondisi: baru, Drilling capacity in steel (diameter): 20 mm Throat: 195 mm Spindle stroke: 80 mm Drill spindle taper: MK 2 Table clamping surface: 320 x 300 mm Total power requirement: 0.75 kW Machine weight approx.: 0.072 t Space requirement approx.: 0.7 x 0.4 x 1.1 m Cgedpfjiiq S Nex Aqxew Robust bench drill with self-tightening drill chuck with adjustable drilling depth stop with zero point trigger with emergency stop rotatable table plate

Kondisi: seperti baru (mesin pameran), A demonstration double-mitre cold circular saw for metal with a 350mm circular saw blade. Cutting capacity: Codopgmngepfx Aqxjgw Round/Rectangle 90°: 120 mm / 140 x 100 mm Round/Rectangle 45° right and left: 100 mm / 100 x 100 mm Cutting speed: 18 / 36 m/min For further technical data, see PDF document. Technical data and dimensions subject to change/errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001 Cgjdpfx Aju Tuk Heqxew

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 CNC Control – Excellent Condition, CE Compliant! Technical Data: Csdpfswrhxfjx Aqxjgw • Year of manufacture: 2006, Machine No. 348013 • Rigid angle table • Infinitely variable spindle speed up to 4,500 rpm • Stepless feed on 3 axes from 0 to 2,000 mm/min • Rapid traverse on X and Y axes: 5,000 mm/min • Z axis rapid traverse: 4,000 mm/min • Travel (X/Y/Z): 400/350/400 mm • Table size: 650 x 350 mm • Table load: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quills – SK40 taper • Hydraulic drawbar system • Weight: approx. 1,800 kg • Space requirements: approx. 2.3 x 2 x 2 m • Drive power: 15 KVA Equipment and Accessories: • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control operation manual and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition. It comes from a facility where it was primarily used sparingly for training purposes only. The CNC control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching between vertical and horizontal milling is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann in operation at our site.

Kondisi: baik (bekas), Vise, bench vise, engineer’s vise, parallel jaw vise, heavy-duty vise - Parallel jaw vise: Jaw width 150 x 30 mm - Clamping width: 235 mm - Dimensions: 490/220/H195 mm Cgjdpevm U Htefx Aqxow - Weight: 26 kg