Geser

AMADA PROMECAM GS 630

Kondisi: baik (bekas), Tahun pembuatan: 2018, Meja 1473 x 305 mm, Perpindahan XYZ: 1000 x 410 x 400 mm (knee), jangkauan quill 127 mm, taper spindle ISO40, Nwjdpfx Absxftqdjueb tombol pelepas otomatis, motor spindle 5HP, kecepatan spindle 70 - 3600 rpm, Kontrol CNC Prototrak SMX,

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: 119, Lg.Nr. 24217 Nsdpfxstpnpls Abuowb Technical Data: - Max. working width: 2520 mm - Max. material thickness at 40 kp/mm² tensile strength: 3.5 mm - Bending angle adjustment: pre-selectable - Upper beam drive: 400 V / 1.1 kW - Bending beam drive: 400 V / 4.0 kW - Space requirement (approx.): W 3900 x H 1550 x D 1200 mm - Weight (approx.): 4500 kg

Kondisi: baik (bekas), Tahun pembuatan: 2008, panjang penggilingan: 1.250 mm, panjang meja: 1.250 mm, beban meja: 1.200 kg, lebar meja: 500 mm, kecepatan spindel (maks.): 2.600 rpm, kecepatan spindel (min.): 1.000 rpm, berat keseluruhan: 9.300 kg, jarak pergerakan sumbu X: 1.400 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, daya: 185 kW (251,53 hp), tegangan masuk: 400 V, kebutuhan tinggi: 2.870 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, X-axis: Grinding length 1,250 mm, travel 1,400 mm Nwedpou Hiq Rsfx Abuob Y-axis: Distance from table to spindle center 700 mm, travel 600 mm Z-axis: Grinding width see note, travel 600 mm Note: The grinding area in the cross direction (Z-axis) depends on the travel and the grinding wheel width. Example: Cross travel = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See images for more technical data.

Kondisi: bekas, Tahun pembuatan: 1985, Swing diameter over bed: 810 mm Swing diameter over cross slide: 560 mm Distance between centers: 00 mm Bed width: 480 mm Cross slide travel: 400 mm Top slide travel: 180 mm Tool shank cross-section: 32 x 25 mm Drive power: 22 kW Spindle torque: 30 Nm Spindle head size: 11, DIN 55027 Spindle diameter at front bearing: 152.4 mm Spindle bore: 106 mm Speed range: 9 - 1800 rpm Number of spindle speeds: 24 Longitudinal feeds: 0.092 - mm/rev Cross feeds: 0.046 - mm/rev Metric threads: 0.5-112 mm Inch threads: 1/4 - 56 TPI Thread module: mm Thread DP: 1 - 224 pitch Tailstock quill diameter: 115 mm Quill stroke: 225 mm Quill taper: MT 6 Workpiece weight between centers max.: 00 kg Nwjdoxn Ty Rspfx Abujb Max. workpiece weight - unsupported: 750 kg Three-jaw chuck Röhm, Ø Machine dimensions approx.: 4600x1900x1600 mm Weight approx.: 4300 kg Number of feeds and thread settings: 99 Distance between centers: 00 mm Accessories: - 3-axis digital readout - Full-length movable chip guard (plexiglass) - Coolant system - Rapid traverse on Z and X axes - Multifix toolholder size C with 6 interchangeable cassettes - Bed stop with micrometer adjustment - Fixed steady rest - 300 mm - Taper sleeve for main spindle MT 6 - Live center (rotating center) MT 6 Bedways in very good condition!

Kondisi: baik (bekas), Tahun pembuatan: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main data: Table surface: 605 x 300 mm Max. longitudinal table travel (manual): 750 mm Cross table travel: 340 mm Grinding height (min./max., table to new grinding wheel): 22.5 / 322.5 mm Standard magnetic chuck size: 600 x 300 mm Workpiece weight incl. magnet: 420 kg X-Axis / Longitudinal Travel: T-slots (number x width): 3 x 17 mm Table feed, hydraulic: 0.3 – 25 m/min Travel per handwheel revolution: 47 mm Y-Axis / Vertical Feed: Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm Graduation per handwheel division (x1/x10): 0.001 / 0.1 mm Spark-out strokes: 0 – 5 Rapid traverse: 400 mm/min Z-Axis / Cross Travel: Automatic cross feed, intermittent: 0.5 – 20 mm Nedpfx Abjw Dvkasuswb Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min Travel per handwheel revolution: 5.0 mm Graduation per handwheel division: 0.02 mm Standard grinding wheel: Diameter x width: Ø 355 x 38 (50) mm Bore: Ø 127 mm Speed: 1500 rpm Accessories: various grinding wheels Documentation

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Nwedpfx Abehzbipjusb Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: baru, Tahun pembuatan: 2025, de Nwedpfx Absg Eghdjuob

Kondisi: baik (bekas), Tahun pembuatan: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Max. punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears at the flat bar shear up to 500 mm length for material thicknesses up to 18 mm steel Contact length stop Includes a large amount of accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg Nedet Iklkjpfx Abuowb

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. Nodpod Ixadefx Abuswb The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: bekas, hydraulische-tafelschere-steiner-hts30-20r Nodpfx Aed Hxx Asbuewb