Mesin meninju dan menggigit

AMADA PROMECAM Vipros King 368

Kondisi: baik (bekas), Tahun pembuatan: 2016, panjang pembubutan: 1.585 mm, daya motor spindle: 22.000 W, kecepatan spindel (min.): 5.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 1.585 mm, jarak gerak sumbu Z: 230 mm, tinggi total: 3.100 mm, panjang total: 6.100 mm, lebar total: 3.230 mm, berat keseluruhan: 16.600 kg, Mazak Integrex i-200ST x 1500U Mill-Turn Center MACH-ID 9450 Hjdpfx Ajyrcxljbxok Manufacturer: Mazak Model: Integrex i-200ST x 1500U Control unit: Smooth Mazatrol Year of manufacture: 2016 5-axis simultaneous operation, EIA/ISO Milling spindle with threading capability Additional M-Code (1 pair for 2 M-Codes) Prepared for RMP-60 Sub spindle with C-axis (C1 + C2 synchronization) High-pressure coolant (HPC) through main spindle: 70 bar HPC through lower turret: 15 bar Knoll Filtration System KF-400/2300 SMW KNCS-N-325-104 3-jaw chuck Maximum turning diameter: 658 mm X-axis travel: 260 mm Y-axis travel: 1585 mm Z-axis travel: 230 mm B-axis: 360° Spindle bore: 76 mm Main spindle speed: 5000 rpm Main spindle power: 22 kW Sub spindle speed: 5000 rpm Sub spindle through bore: 65 mm Sub spindle power: 22 kW Tool changer: 36 stations Driven tool speed: 12,000 rpm B-axis mounting: HSK-63 Lower turret positions: 9 Driven tool speed (lower turret): 6,000 rpm Driven tool power: 5.5 kW Length: 6,100 mm Width: 3,230 mm Height: 3,100 mm Weight: 16,600 kg Please note: The information provided here is given to the best of our knowledge and, where possible, obtained from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend that you verify all critical details independently.

Kondisi: bekas, Tahun pembuatan: 2002, Turning diameter: 820 mm Turning length: 2,000 mm Control: SIN 810 D Centre height over flat bed: 400 mm Hjdpfx Abow Dvipoxjk Swing diameter over cross slide: 500 mm X-axis travel: 540 mm Z-axis travel: 2,100 mm Feed rate X/Z-axis: 0.01 - 50 mm/min Rapid traverse X-axis: 5.00 m/min Rapid traverse Z-axis: 10.00 m/min Feed force, facing: 12,500 N Feed force, longitudinal: 20,000 N Spindle speeds: 6.4 - 1,600 rpm Spindle speed, gear stage 1: 6.40 - 376 rpm Spindle speed, gear stage 2: 27.40 - 1,600 rpm Drive power at 60% / 100% duty cycle: 46.00 / 37.00 kW Torque at 60% / 100% duty cycle: 5,073 / 4,069 Nm Constant cutting speed: 1 - 9,999 m/min Spindle nose according to DIN 55027 - Size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 128 mm Tailstock quill taper: MK 6 Quill diameter: 125 mm Quill stroke: 280 mm Thread pitch: 0.1 - 400 mm Total power requirement: 35.00 kW Machine weight: approx. 11.00 t Space requirements: approx. 6.00 x 3.00 x H2.60 m Equipment: SIEMENS Sinumerik 810D control, chip conveyor, tailstock, extraction unit, 2 steadies included. Spindle bearings overhauled by OEM 04/2023 Machine can be inspected under power.

Tahun pembuatan: 2023, Kondisi: baru, Maximum chopping height: 200 mm Infeed width: 500 mm Number of feed rollers: 3 pcs Rotor diameter: 600 mm Chopping length approx.: 20-30 mm Output capacity: 16–20 cubic meters/hour wood chips Number of chopping knives: 2 pcs Feed motors: 2 x 2.2 kW Net weight approx.: 4100 kg Infeed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Hsdpfoncd Azsx Abxsk Bearings: oversized roller bearings Bearing housing: steel, flange housing Feed rollers: steel, specially toothed Chip discharge: below the machine Machine grate: (screen) for re-shredding overlength chips Drive pulley: matched to main motor, N=1500 rpm Hydraulic system: comprises hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed: by 2 geared motors, manufacturer NORD GETRIEBE

Kondisi: sangat baik (bekas), Tahun pembuatan: 1967, de-001 Hjdpfxjl D N Hve Abxek

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2003, FLEXIbend RAS 73.30 - Data teknis umum dalam mm: Panjang tekuk: 3200 mm Ketebalan plat maksimum (400 N/mm²): 3,0 mm Jarak angkat rahang atas maks: 300 mm Sistem stopper (U stop): 10-1550 mm Opsi perpanjangan: (-3050) Dimensi mesin (opsi terbesar): 4360 x 5220 mm Berat mesin dasar: 4400 kg - Data terkait mesin: Penggerak motor; 400V, 50/60 Hz, 3-fase Tahun pembuatan: 2003 Kondisi: Diperbaiki – kondisi bekas sangat baik Satu set alat lengkap, dengan ketebalan plat maksimum spesifik Pengoperasian oleh 2 orang dari depan Foot switch kedua untuk pengoperasian dari belakang (termasuk pengaman cahaya saat bekerja dari belakang) Hedpfx Absx Hx Sloxjk Kontrol layar CNC grafis warna 15" Touch&More CNC backgauge dan sistem penyangga (10-1550) Sistem stopper (standar): 10-1550 mm - Gambar ilustrasi -

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Pergerakan Pergerakan Sumbu Y: 510 mm Hsdpfsx R E Ihox Abxsk Pergerakan Sumbu Z: 580 mm Mazak Variaxis i-600 5-sumbu ini diproduksi pada tahun 2013. Mesin ini dilengkapi dengan sistem kontrol Siemens 840D, ukuran meja 600 mm, dan kecepatan spindle 18.000 RPM dengan daya 35 kW. Kapasitas alat sebanyak 40 dan waktu kerja spindle 1.900 jam. Jika Anda mencari kemampuan milling berkualitas tinggi, pertimbangkan mesin Mazak Variaxis i-600 yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Milling

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 8.835 h, kapasitas angkut: 6.000 kg, tinggi angkat: 4.000 mm, jenis bahan bakar: diesel, berat kosong: 9.160 kg, warna: merah, Kami menawarkan side loader Jumbo JDQ 60712/52 Hjdox Trllspfx Abxek

Kondisi: baru, CNC Federformmaschine. Eine bewährte Maschine, die in jeder Federfertigung als Standardausstattung vorhanden sein sollte – bietet eines der besten Preis-Leistungs-Verhältnisse am Markt. Hjdpfx Abjtv D Awjxok

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° range and continuous B-axis. Equipped with a 10-station pallet magazine and automatic tool changer with 199 positions. Hjdpeku A A Hjfx Abxjk Machine is supplied with the following accessories: Chip conveyor, high-pressure coolant system through the spindle line with separate tank and paper filter.

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units Hodpodfgg Iofx Abxek D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.