Mesin Pemotong Laser

Amada EMLZ 3610 NT

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Nsdpfxsd Ixade Ahwsku Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 3.200 h, gaya penekanan: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift +230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Robust base and manipulator in die-cast aluminium construction - Load capacity 60 kg, sheet plus gripper - Low floor track in welded construction - Sheet sensor for contour detection - Rotary union for easy gripper change Gripper coupling on BendMaster - Sensors for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Remote service via internet - Comfort operation via monitor, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper kit without singulation (material for 3 grippers) + Modular vacuum gripper kit with singulation (material for 3 grippers) + Tongs gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-side door for safety fence (or left when combined with ToolMaster) Machine - Robust machine frame in all-steel construction - Press beam - Spherical mounting of the press beam with tilt - Electro-hydraulic upper drive with 4-cylinder technology - Optical setup and positioning aid with control valves - Generous bending clearance - Flat front covers - Blockwise hydraulics - Electronic pressure scale - Measuring system with glass scale and deflection compensation - Hydraulic oil inside the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge system - 2-axis backgauge system, X- and R-axis Tool clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool shifting, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming Nkodpfx Aoxayl Djhweu - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touchscreen - Network capability - Remote service via internet Operation - Operator console with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety devices - CE marking

Kondisi: baik (bekas), Tahun pembuatan: 2002, jam operasional: 43.000 h, nomor mesin/kendaraan: V020113, AMADA MODELL HFT 8025, hydraulische Abkantpresse mit CNC-Steuerung, 80 Tonnen Presskraft x 2500 mm Biegelänge, Downstroking-Ausführung. Nodpfx Ajuwktnehweku Modell: Amada HFT 8025 Downstroke CNC-Abkantpresse Baujahr: 2002 Presskraft: 80 kN Gesteuerte Achsen: Y1, Y2, X, R Maximale Biegelänge: 2500 mm Durchgangshöhe (Ständeröffnung): 470 mm Eilgang: 100 mm/s Biegegeschwindigkeit: 1 - 10 mm/s Rücklaufgeschwindigkeit: 1 - 100 mm/s Ölkapazität: – Motorleistung: 9 kW Maschinengewicht: 5750 kg Tischlänge: 2500 mm Tischbreite: 180 mm Durchgangshöhe: 470 mm Ausladung: 420 mm CNC-Steuerung

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, ketebalan pelat baja (maks.): 3 mm, berat keseluruhan: 15.000 kg, tegangan masuk: 400 V, Sudut pembengkokan (maks.): 180 °, panjang kerja: 3.200 mm, jangkauan kerja: 3.200 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Technical specifications: Year: 2013 Working length: 3,200 mm Maximum sheet thickness (mild steel 400 N/mm²): 3.00 mm Maximum sheet thickness (stainless steel): 2.00 mm Maximum sheet thickness (aluminum): 4.00 mm Nkodpfxjwq Rumo Ahwju Maximum bending height on four sides: 250 mm Upper beam stroke: 650 mm

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 88 kW (119,65 hp), suhu: 220 °C, kapasitas pemanasan: 30 kW (40,79 hp), tinggi benda kerja (maks.): 1.500 mm, panjang benda kerja (maks.): 500 mm, bahan isolasi: Steinwolle, ketebalan isolasi: 150 mm, lebar benda kerja (maks.): 500 mm, Scope of supply: 1. Chemical pre-treatment by spraying (in step-by-step operation) 2. Dryer 3. Powder coating system 4. Powder curing oven 5. Semi-automatic conveyor system 6. Electrical control system Building / Installation area Maximum system footprint: 12,000 x 6,500 mm Floor type: Industrial floor Workpiece sizes Max. part dimensions: L = 500 mm, H = 1,500 mm, W = 500 mm Parts spectrum: Steel Conveying technology P&F (Power & Free): Chain conveyor, step-by-step operation, semi-automatic Pre-treatment Chemical Nodpfx Asulwg Nshwoku Energy supply Electricity: Supplied on-site (max. 88 kW) Gas: Supplied on-site Compressed air: Supplied on-site Water: Supplied on-site Calculation System type: Step-by-step line Conveying speed: 3.2 metres/min Step length: L = 1,600 mm Time for conveying movement: Tm = 1.6 metres : 3.2 metres/min = 0.5 min Dwell time per step: Ts = 8.5–12 min Total cycle time: Tt = Tm + Ts = 9–12.5 min Electric power: Total capacity 88 kW Min. average consumption: 60 kWh Max. average consumption: 70 kWh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Technical data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt or fuse materials together. The laser welding cell consists of a fiber laser with a 6-axis industrial robot, which moves on a travel rail. The parts to be welded are clamped onto a rotary-tilt table. The safety enclosure is equipped with a sliding door, ensuring safe operation. Robot: Type: M-710iC/50 (FANUC) Robot control: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Reach: 2050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: fully enclosed Robot travel rail: Nkodpjxndynsfx Ahwou Length: 1500 mm Travel speed: 60 m/min Repeatability: ±0.1 mm Positioning table: Working height: 700 mm Max. load capacity: 500 kg Rotational axis: ±720° Tilting axis: ±90° Resonator: Beam source: YLS4000-S2T Wavelength: 1070 - 1080 μm Laser power: 4 kW Control: Type: Amada Display: 15" LCD color touchscreen Controlled axes: robot and linear axis Coordinates between robot and beam source Memory: 3 MB SRAM I/O interface: LAN, USB Welding head: Amada Focal position control: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving system: The integrated rotating optics allow the laser beam to orbit. The patented system by AMADA enables welding of larger gap dimensions with or without filler material, and even aluminum can be welded. NC focus system: The NC focus system automatically sets the optimal focal position for each welding condition. It equally facilitates welding of simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be carried. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates tedious manual teaching operations. Deviations between the programmed and actual seam path are detected by a CCD camera. Condition: Very good condition. Machine has been used very little: approx. 16,500 hours. The seller assumes no liability for typing or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface for 2nd machine Nedewykccspfx Ahwjku

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, TRUMATIC 6000 FIBER (K06) GROSSFORMAT + SHEETMASTER + GRIPMASTER Baujahr: 2018 Laserleistung: 3 kW Faserlaser Zusätzliche Ausstattungen, MASCHINE: - Stanzqualitätspaket - Umformpaket - MultiTool-Funktion - Gravurfunktion - SoftPunch-Funktion - Matrizen-Sprühlubrikation mit Füllstandskontrolle - Absenkbare Matrize - Integrierte Ebenheitsfunktion - Smart Punch Monitoring - Zusätzliche Spannvorrichtung, 1 Stück - Individuell öffenbare Spannvorrichtungen, 4 Stück Nksdeyambaepfx Ahwju - Nachsetz-Zylinder - Schwingungsdämpfung - Bürstentische mit Be- und Entladehilfe - Verzugserkennung bei Blechen - Kabelloses Bedienpult - MDA-Schnittstelle Zusätzliche Ausstattungen, SHEETMASTER: - SheetMaster 3000 x 1500 mm (AK04) - Beladestation mit Fächermagnet - Entladeplattform - Be- und Entladen parallel zur Produktion - Abziehvorrichtung inklusive Positionierhilfe für großformatige Bleche - Zusätzliche Positionierhilfen für mittelformatige Bleche - Zusätzliche Positionierhilfe für kleinformatische Bleche - Erstes zusätzliches Saugpaket - Zweites zusätzliches Saugpaket - Entladeüberwachung für Lasergeschnittene Teile Zusätzliche Ausstattungen, GRIPMASTER: - GripMaster 3000 x 1500 mm - Teileförderband für Stanz- & Laserbearbeitungsseite

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Wagner powder coating system for sale! Powder coating equipment, year 2010, includes the following components: Spray Booth: Prima Cube 16000 Powder Supply: Powder Center Powder Recovery: Cyclon Filter 16000 Reciprocator: KHG 350 Production Line Configuration INCLUDES: I. Specifications: Maximum workpiece dimensions: LxWxH = 2600 x 400 x 1850 mm II. Equipment: 1. Technological Conveyor, automatic, speed V = 1.2 m/min, adjustable between 0.5–2.5 m/min 2. Pretreatment Tunnel MNA-3-LPG, total length 16.7 m: - Loading zone length: 2.5 m a. Washing, degreasing, and phosphating; length: 3.6 m • Number of spray frames: 10 • Number of nozzles per frame: 18 • Total nozzles: 180 • Pump capacity: 162 m³/h • Pump power: 15 kW • Process tank: 4 m³ for active solution • Integrated heat exchanger with LPG burner, 160 kW • Operating temperature: 50°C • Mechanical oil separator • Solution filter • Metering system with diaphragm pump and regulator • Washing time: 3 minutes b. Drip-off section, length: 3.1 m • Drip time: 2 min 30 sec c. Primary rinse; length: 1.2 m • Number of spray frames: 4 • Nozzles per frame: 18 • Total nozzles: 64 • Pump flow: 38 m³/h • Pump power: 3 kW • Rinse tank: 1.5 m³ • Rinse time: 1 min c. Drip-off zone, length: 3.1 m • Drip time: 2 min 30 sec d. Final rinse; length: 1.28 m • Number of spray frames: 3 • Nozzles per frame: 18 • Total nozzles: 54 • Pump flow: 33 m³/h • Rinse tank: 1.5 m³ • Pump power: 3 kW • Spare spray frame included • Nozzles per frame: 18 Nksdpfx Aoww Adtohwsu • Final rinse time: 1 min e. Drip-off section, length: 2 m • Drip time: 1 min 40 sec - Three exhaust connections, each with ventilator - Process chamber made of stainless steel - Pipework in PVC or stainless steel (1 unit) 3. Automatic Dryer after Washing AST-1-KLPG: - Internal dimensions (LxWxH): 7000 x 3000 x 2800 mm - Air curtains on each side minimize heat loss - One indirect heat exchanger (LPG), rated at 200 kW - Three circulation blowers, total airflow 6000 m³/h each - Two exhaust duct connections - Temperature sensor and controller - Overtemperature sensor - Airflow monitoring sensor - Chamber in galvanized steel - 200 mm thermal insulation - Drying time: 10 min (1 unit) 4. Automatic Curing Oven APT-2-KLPG for Powder Coating: - Internal dimensions (LxWxH): 10200 x 3600 x 2800 mm - Air curtain on one side to prevent heat loss - Two indirect LPG-fired heat exchangers, each 300 kW - Eight circulation blowers, 6000 m³/h each - Two exhaust duct connections - Temperature sensor and regulator - Overtemperature sensor - Circulation monitoring sensor - Galvanized steel chamber - 200 mm thermal insulation - Curing time: 25 min (1 unit) 5. Overhead Rail Conveyor System ATR-ADAX for Powder Coating Line, includes: • Straight track with hangers, length: 146 m (hanger spacing 400 mm) • Drive station: 2 units • Tension station: 1 unit • Chain lubrication station: 1 unit • Structural drawings: 1 set

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, jam operasional: 27.693 h, daya laser: 3.000 W, Perlengkapan: unit pendingin, Rear automatic loading 6500 – Unloading 6500 – Round tube min 16 mm max 225 mm – Square tube max 160x160 mm – Rectangular tube max 200x100 mm Nedpfx Aer Iz Slohwjku