Sistem VFFS kompak

AMTEC VFFS-SYS 12-lane 720-G

Kondisi: baru, Tahun pembuatan: 2025, Automatic powder filling and lid sealing machine for small containers such as coffee capsules. – Suitable for dosing and filling powdery products (coffee, coffee blends, drinking chocolate, milk powder, etc.) into a variety of capsule-shaped container sizes and formats (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, with or without filter, etc.), followed by sealing. Automated filling and dosing via auger filler. UV sterilization system, ionizer, and dust extraction system for cavity formats included. Automatic foil feed and double heat sealing of the lid. – Specifications: maximum idle speed: 55 cups/min; filling range: 0–20g; filling accuracy: +/- 0.15g; hopper capacity: 5L (approx. 3kg powder); voltage supply and power consumption: 220V, 1.5kW; required compressed air and flow rate: 6–8 bar, approx. 300L/min; protective gas flow rate: approx. 200L/min; machine dimensions: L1900 x W1118 x H2524mm; weight: 800kg. Specifications are based on Nespresso capsules; deviations may occur for capsules of other brands. Please note that our new prices are often lower than typical used market prices. Feel free to send us an inquiry and let us know your packaging requirements. – We generally have 30–50 different new machines available from stock for immediate delivery. For customer-specific machine builds, we offer very short lead times starting at approx. 3 weeks. – All machines are supplied with a full warranty. Hfodpfx Aev Nkzxsbhec

Tahun pembuatan: 2025, Kondisi: baru, Complete version of the vertical packaging system featuring auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with high or low flowability. The vertical form fill seal (VFFS) packaging machine is equipped with the following components: PLC with touchscreen operating monitor (available in multiple languages, such as English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, double transport capability, air removal/extraction device (removes air from the bag before sealing, does not create a vacuum), holder for heavy finished bags, Euro hole punch device; suitable for OPP and PE film (PE unit available at extra charge, if required). - VFFS Packaging Machine Specifications: Filling volume: up to 5000ml; Max. film width: 620mm; Bag size min-max: L(100-400)xW(180-300)mm; Max. idle cycle rate: 45 cycles/minute; Stainless steel 304; 220V, 5kW; 6bar, 0.3m³/min; Machine dimensions: LxWxH: approx. 1780x1850x1950mm; Weight: 700kg. - Auger Dosing Unit Specifications: Filling capacity up to 50l (hopper); Dosing range: 10-5000g; Max. idle cycle rate: 40 cycles/minute; Accuracy: ±0.3~1.5% (depending on product); 380V, 3kW; dosing unit dimensions (LxWxH): 600x1250x1200mm; Weight: 220kg. Screw conveyor for automatic transport of material to the dosing unit. Vibration motor ensures consistent product flow. Feed hopper with up to 150 liters capacity; size depends on customer-specific final system. - Specifications: Hopper, conveying length, and conveying angle can be customized according to product and customer requirements. Overall dimensions accordingly depend on this. Conveying length: 3~4m; stainless steel 304; conveyance speed: 3.0m³/h - 12.0m³/h; 380V, 0.8kW-4.1kW; Weight: 130kg – 270kg. Stated specifications may vary. Support rod available optionally. The discharge conveyor features a stainless steel frame. - Specifications: conveyor speed: 30m/min; 220V, 0.55kW; Dimensions (LxWxH): approx. 1850x550x1230mm; Weight: 80kg. Overall system dimensions: approx. L2980xW3650xH2600mm, depending on final configuration. The system must fundamentally be tailored to customer-/product-specific requirements; module and machine specifications may therefore vary. Key components: SIEMENS color touchscreen display, SIEMENS PLC control unit, SIEMENS servo motor, AIRTAC cylinders, AIRTAC solenoid valves, OMRON relays, SIEMENS servo motor for film transport. The machine/system is also available in additional versions for different packaging sizes and packaging speeds. Please note that our new prices are frequently below common used machine prices. Feel free to make an inquiry specifying your packaging project. - Typically, 30-50 different new machines are always in stock and immediately available. For customer-specific machines, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with full warranty. Hfsdsv Nmk Ajpfx Abhoc

Tahun pembuatan: 2025, Kondisi: baru, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without platform frame. Suitable for producing pillow bags with back seam, gusseted stand-up pouches (gusseting device required), OR pyramid-shaped bags (special sealing unit required). The vertical form-fill-seal machine is equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for seal/cut positioning; pneumatic end-seal unit; servo motor for film pulling; thermal transfer printer for batch number, date, and best-before date. - Multihead weigher specifications: Number of weighing heads: 10; weighing range (per discharge): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge gate: single flap; surface finish: smooth (optional dimpled surface); product-contact parts made from AISI 304 (optionally AISI 316 at extra cost). - VFFS machine specifications: maximum machine cycle rate (no load): 65 cycles/minute; bag dimensions: L(40-250)xW(50-170)mm (dual film feed for longer bags possible); suitable film width: 120-360mm; product-contact parts made from AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 3.7kW; required compressed air: 0.4-0.8MPa; air consumption: 0.5m³/min; dimensions (LxWxH): 1400*1320*2040mm; weight: 580kg. Hfedpfsv Nm T Rsx Abhjc Please note that our new machine prices are often lower than typical used equipment prices. Please feel free to contact us and let us know about your packaging requirements. We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. All machines are supplied with a full warranty.

Kondisi: bekas, jarak tempuh: 54.160 km, daya: 125 kW (169,95 hp), jenis bahan bakar: diesel, bahan bakar: diesel, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2023, Perlengkapan: ABS, kendali jelajah, kontrol traksi, kunci sentral, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik,

Tahun pembuatan: 2025, Kondisi: baru, Vertical packaging machine including dosing unit(s) with 6 production lanes for manufacturing "stick packs" with center back seal (alternatively: 3- or 4-side-sealed - at extra cost) for packaging standard liquids (water, vinegar, etc.). PLC and color touchscreen from OMRON, self-diagnostics. Pneumatic components from AIRTAC, PID temperature control from OMRON, electronic components from SCHNEIDER and OMRON. Film unwinding, AB converter control, stainless steel version (SS304), piston pump with 60-liter hopper. - Specifications: max. machine cycle rate in idle mode: 6x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; pouch sizes: L(50-350)xW(10-68)mm; power supply: 220V, 4.5kW; compressed air: 1.5m³/min, 6 bar; machine dimensions: L1600xW1400xH1900mm; weight: 550kg. The machine/system is also available in further designs for various packaging sizes and packaging speeds. Please note that our new equipment prices are often below the usual prices for used machines. Feel free to inquire and inform us about your packaging requirement. - Generally, 30-50 different new machines are always available ex-stock. For machines made to customer specifications, we offer very short delivery times from approx. 3 weeks. - All machines come with a full warranty. Hfjdsv Nmd Nopfx Abhec

Kondisi: baru, Tahun pembuatan: 2025, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with either high or low flowability. The vertical form fill seal machine (VFFS) is equipped with the following components: PLC (touchscreen operating monitor, available in various languages, e.g., English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, double transport possible, air separation/extraction device (removes air from the bag before sealing—no vacuum is generated), heavy bag holder, Euro hole punching unit, suitable for OPP and PE film (PE unit possibly at extra cost). - VFFS machine specifications: Filling range: up to 3000ml; film width: max. 520mm; bag size min-max: L(80-400)xW(80-250)mm; max. idle machine cycle rate: 50 cycles/minute; stainless steel 304; 220V, 4kW; 6 bar, 0.3m³/min; machine dimensions: LxWxH: approx. 1150x1790x1650mm; weight: 600kg. - Auger dosing unit specifications: Hopper capacity up to 50l; filling range: 10-1000g; max. idle machine cycle rate: 50 cycles/minute; accuracy: ±0.3~1.5% (depending on product); 380V, 2.5kW; dosing unit dimensions LxWxH: 690x1030x1100mm; weight: 150kg. Screw conveyor for automatic transport of material to the dosing unit. Vibratory motor ensures uniform product flow. Supply hopper with up to 150-liter volume. Size depends on the customer's specific final system. - Specifications: hopper, conveyor length, and angle can be customized for product and customer requirements. Overall dimensions depend on these factors. Conveyor length: 3~4m; stainless steel 304; conveying speed: 3.0m³/h - 12.0m³/h; 380V, 0.8kW-4.1kW; weight: 130kg – 270kg. Deviations from the stated specifications are possible. Support bar is optionally available. The discharge conveyor has a stainless-steel frame. - Specifications: conveying speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Dimensions of the complete system: approx. 2350xW3590xH2500mm, depending on final configuration. In general, the system must be adapted to customer or product-specific requirements. Therefore, deviations in specifications for the modules and machines are possible. The main components: Color touchscreen display SIEMENS, PLC control unit SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. Hfedpfx Aev Nmkvobhsc The machine/system is also available in further versions for different packaging sizes and packaging speeds. Please note that our new prices are often lower than the usual prices for used equipment. Feel free to inquire and let us know your packaging requirements. – Generally, 30-50 different new machines are always available from stock for immediate delivery. For machines manufactured to customer specification, we offer very short lead times starting from approx. 3 weeks. – All machines are supplied with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Vertical packaging machine including dosing unit(s) with 4 production lines for the manufacturing of "stick packs" with center fin seal (alternatively: 3- or 4-side sealing – at additional cost) for packaging powder products (such as pepper, milk powder, etc.). PLC and color touchscreen by OMRON, self-diagnosis system. Pneumatic components by AIRTAC, temperature PID control by OMRON, electronic components by SCHNEIDER and OMRON. Film transport, AB frequency inverter control, stainless steel version (SS304), auger dosing unit with servo motor, equipped with hopper. - Specifications: accuracy: +/- 0.3-1%; max. machine cycle speed (idle): 4x60 cycles/min; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-100)mm; power supply: 220V, 3.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1500xW1300xH1900mm; weight: 450kg. The machine/system is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the typical prices for used equipment. Simply send us your inquiry and describe your packaging requirements. – We typically have 30-50 different new machines in stock and available for immediate delivery. For custom-manufactured machines we offer very short lead times, starting from approx. 3 weeks. – All machines are offered with a full warranty. Hfjdpfx Absv Nmftshsc

Kondisi: baru, Tahun pembuatan: 2025, Vertical packaging machine including dosing unit(s) with 6 production lanes for manufacturing stick-packs with central (fin) back seal (alternatively: 3- or 4-side sealing available at extra charge) for packaging powder products (pepper, milk powder, etc.). PLC and color touchscreen by OMRON, self-diagnosis function. Pneumatic components from AIRTAC, temperature PID by OMRON, electronic components from SCHNEIDER and OMRON. Film transport, AB converter control, stainless steel version (SS304), auger dosing unit with servomotor, including hopper. - Specifications: Accuracy: +/- 0.3-1%; max. machine cycle rate idle: 6x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-68)mm; power: 220V, 4.5kW; compressed air: 1.5m³/min, 6bar. Machine dimensions: L1600xW1400xH1900mm; weight: 550kg. This machine/system is also available in further versions for different packaging sizes and speeds. Please note that our new prices are often below usual used equipment prices. Feel free to contact us with your packaging requirements. We usually have 30-50 different new machines immediately available from stock. For custom-built machines, we offer very short lead times from approx. 3 weeks. - All machines are supplied with full warranty. Hodev Nmfyjpfx Abhsfc

Kondisi: baru, Tahun pembuatan: 2025, en-GB-1 Hsdpfx Abev Nmc Sshjfc

Kondisi: baru, Tahun pembuatan: 2025, I-, Z- or L-shaped belt conveyor for transporting small to large-volume, wet/damp, or deep-frozen products to the weighing unit. Open design, corrugated sidewalls, water-resistant, with all product-contacting components made of polyurethane and certified to FDA 21 CFR 177.2600. – Specifications: Conveyor pocket dimensions: L (customizable to product requirements) x W250 x H50 mm; stainless steel frame; adjustable conveyor speed; conveyor dimensions: L (according to incline) x W450 x H3000 mm. The machine/system is also available in additional configurations for various packaging sizes and packaging speeds. Hjdpfxjv Nml Te Abhofc Please note that our new prices are often below the usual prices for used equipment. Simply send us an inquiry and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock at any given time. In addition, we offer very short lead times for custom-built machines, starting at around 3 weeks. – All machines are supplied with a full warranty.