Sabuk konveyor Arburg (76A)

Arburg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.157 kN, diameter sekrup: 35 mm, Tidak ada harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Gaya penutupan: 220 t Diameter ulir: 35 mm DETAIL MESIN Jarak antar batang pengikat: 520 x 520 mm Pjdpfx Aljy Ew Tlo Isgk Catatan: Jika membeli beberapa barang dari lokasi yang sama (lihat penawaran di bawah), biaya pembongkaran dan pemuatan yang lebih murah akan diterapkan.

Tahun pembuatan: 2010, Kondisi: baik (bekas), Graham Dampftunnel Modell: Z3271 Baujahr 2010, Rahmen aus Edelstahl und Förderband mit Edelstahlnetz, Bandmaß 3000 mm x 380 mm, variable Geschwindigkeit, mit Hydromatik Dampferzeuger, 3Ph Pedefk Idujpfx Al Isgk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 46.201 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 784 kN, diameter sekrup: 30 mm, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! RINCIAN TEKNIS Gaya penutupan: 80 t Diameter ulir: 30 mm Jarak antar batang: 370 mm x 370 mm Podpfoy Ew Rdsx Al Ijgk RINCIAN MESIN Jam operasional: 46.201 jam PERLENGKAPAN Angus picker Catatan: Jika membeli beberapa item dari lokasi yang sama (lihat penawaran di bawah), Anda hanya akan dikenakan biaya pembongkaran dan pemuatan yang paling ekonomis.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.961 kN, diameter sekrup: 60 mm, Tanpa harga minimum – Penjualan dijamin kepada penawar tertinggi! Podpfxsy Ew D Rj Al Iogk DETAIL TEKNIS Gaya penutup: 200 ton Diameter ulir: 60 mm Jarak antar tiang: 520 x 520 mm Catatan: Jika Anda membeli beberapa item dari lokasi yang sama (lihat penawaran di bawah), Anda akan menerima biaya pembongkaran dan pemuatan yang lebih murah.

Tahun pembuatan: 2022, Kondisi: baru, - Discharge: 500 mm - Incline conveyor: 1300 mm - Feed: 600 mm - Usable width: 350 mm / Overall width: 405 mm - Discharge height: min. 700 mm, max. 1000 mm Pgodjf U Eu Hopfx Al Isk - Cleats: 30 mm high (for usable widths of 350 mm, the cleats are split in the center) - Cleat spacing: 500 mm Available on request: - Special dimensions - Cycle control - Frequency converter

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.961 kN, diameter sekrup: 60 mm, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Pgedpfx Aey Ev Uujl Iek DETAIL TEKNIS Gaya penutup: 200 t Diameter ulir: 60 mm Jarak antar tiang: 520 mm x 520 mm Catatan: Jika membeli beberapa barang dari lokasi yang sama (lihat penawaran di bawah), Anda akan dibebaskan dari biaya pembongkaran dan pemuatan yang lebih murah.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 21.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 190332, gaya penjepit: 1.000 kN, berat injeksi: 15 g, gaya ejektor: 66.000 N, lintasan ejektor: 225 mm, panjang pelat: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Podpfxoy Hki As Al Ijgk Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high wear resistance, fixed) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control: Selogica Clamping unit: hydraulic Operating hours: 21,200 h EQUIPMENT 1 vertical injection unit, mounted on supports instead of on clamping platens for the second injection unit, manually operated, working position adjustable between 70 and 250 mm 2 x core pullers Open nozzle 15 mm, wear-resistant, without heating band (1st injection unit 150) Technology Level 2 – servo-controlled hydraulic system with two variable-displacement pumps Technology Level 3 hydraulic system with three variable-displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line in 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the third injection unit for VE 906/00 – injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm, wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/Manual

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Stainless steel buffer conveyor, dryer 3-piece buffer belt Belt width: 1500 mm Pgjdpfxowb Sqwo Al Iek Stainless steel construction Length: approx. 17.5 meters Width: 2500 mm Height: 3050 mm Weight (per specifications): approx. 8,000 kg Elements under the conveyor belt are not included

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 33.000 h, gaya penjepit: 320 kN, volume langkah: 678 cm³, tekanan injeksi: 2.000 batang, berat keseluruhan: 15.000 kg, diameter konveyor sekrup: 60 mm, Dasar Pengiriman: ex lokasi Waktu Pengiriman: sesuai kesepakatan Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan Psdpfxjy Hxr So Al Iogk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Perlengkapan: dokumentasi / manual, 1 Pgjdpfjx Elqrox Al Isk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, 14 units of steep conveyor belts with corrugated edge are available for sale; the price is per unit. Some specifications for the conveyor belt: - Length: 2000 mm - Belt width (NB): 270 mm - Overall width (GB): 470 mm - Constant belt speed: 4 m/min Psdpeu Smlisfx Al Isgk - Cleat height: 30 mm - Corrugated edge: 30 mm high - Hopper section at the lower end - Heat-resistant belt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Arburg 320C 500-100 / Excellent Technical Condition Year of manufacture: 10.2004 Injection Unit: Screw diameter: 25 mm Shot weight: 45 g Injection pressure: 2000 bar Dosage volume: 49 ccm Clamping Unit: Clamping force: 50 t Tie bar spacing: 320 x 320 mm Platen size: 446 x 446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional Equipment: The machine is in excellent technical condition and was used for testing injection molds. Operating hours: 25,739 h in automatic mode Total operating hours: 30,661 h Hydraulic core pull x 1 Reinforced injection units – bimetallic Proportional valve on injection unit – precise injection Integrated system for quality pressure control by Sensor Kistler – mold pressure measurement The screw diameter can be changed to smaller or larger: 20 mm or 30 mm Dimensions: Weight: 2,300 kg Length/Width/Height: 3.18 x 1.47 x 1.99 m Drive: Pump/Motor: 15 kW Heating capacity: 4.9 kW Pgedpfxey Dp Tbo Al Ijk Total power: 19.9 kW All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Arburg 420C 800-250 Year of manufacture: 1999 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1820 bar Dosage volume: 144 cm³ Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine produced injection-molded parts for the medical industry – cleanroom production conditions Euromap 12 Robot interface Core pull control Injection unit hardened – bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Psdpfx Aley Dqa Ao Iogk Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our site in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, MTF TECHNIK conveyor belt (69), vertical section length 1.05 m, horizontal section length 1.02 m, belt width 21.5 cm, height 0.93 m, year of manufacture 2013 Pedpfx Aov Iz Efol Ijgk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Arburg 1200T 800-150 / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2005 Pgjdoy Dqb Hjpfx Al Ijk Injection unit: Screw diameter: 25 mm Shot weight: 45 g Injection pressure: 2500 bar Dosage volume: 54 ccm Clamping unit: Clamping force: 80 t Tie bar distance: 0x0 mm Platen size: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Air valve x 6 Hydraulic core pull x 6 Hot runner control system Injection unit hardened – bimetallic Rotary table diameter: 1200 mm Kistler sensor – mould pressure regulation Machine serviced by authorised Arburg service in Germany Dimensions: Weight: 7,400 kg Length/Width/Height: 3.92x1.61x3.78 m Drive: Pump/Motor: 22 kW Heating capacity: 9.4 kW Total connected load: 31.4 kW All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our premises in Łódź. Price: On request