Kumparan

ASSERVIMENTI SMD 15 S

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment Cedpfxjgpxc Ss Aa Tegp - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet

Tahun pembuatan: 2003, Kondisi: bekas, Press force 100 t Stroke 10-130 mm Strokes per minute 30-90 spm Throat depth 330 mm Ram adjustment 100 mm Table area 950x660 mm Ram area 540x440 mm Passage opening in table Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Cgsdpfx Aera Rr Eoa Tep Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW straightening and feed machine VRMA 40/78, year of construction 2003 Feed controller HDS 50 BSA decoiler NO20/400V-AP

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: A-07/471A, Maximum sheet width: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feeding rollers: 2+2 Minimum sheet thickness: 0.4 mm Maximum sheet thickness: 3.5 mm Cgjdpfecxxx Rox Aa Top Weight: 0.4 t Space requirement approx.: 0.6 x 0.65 x 1.15 m Strip straightening machine with integrated infinitely variable VARI drive, reversible (forward and reverse operation), mode selector switch for manual and automatic operation, entry roller basket, analog display for roll position indication, roll position adjustment via handwheels, automatic loop control, in very good condition.

Kondisi: bekas, eccentric-press-automat-haulick-roos-type-rvd-125-double-column- eccentric-press-serial-no-212560-year-1981-pressing-force-125-ton s-table-size-880-x-800-mm-table-opening-470-x-140-mm-frame-width- 900-mm-side-frame-width-415-mm-ram-stroke-45-mm-ram-adjustment-ra nge-0-80-mm-installation-height-as-shown-340-mm-strokes-per-minut e-50-to-300-main-drive-motor-power-22-kw-power-supply-380-volt-50 -hz-double-connecting-rod-drive-mechanism-with-4-fold-mounted-ecc entric-shaft-for-off-center-ram-load-side-mounted-control-cabinet -nc-roll-feeder-ebu-width-250-mm-year-2003-standalone-control-pan el-for-roll-feeder-strip-feed-direction-left-to-right-space-requi rements-press-l-x-w-x-h-3000-x-2000-x-3020-mm-transport-height-29 50-mm-weight-of-press-approx-11-tons Codpfohlnzkjx Aa Togp

Tahun pembuatan: 1971, Kondisi: baik (bekas), Uncoiling mandrel – expanding mandrel with support table Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Coil weight: 10 t Cgjdpfed Ha E Sex Aa Tep Mandrel diameter: 508 mm

Tahun pembuatan: 1987, Kondisi: bekas, Strip width 150 mm Coil weight 80 kg Coil outside diameter 650 mm Mandrel height 1000 mm Codpefn Aqlsfx Aa Tsgp Expansion range 230 - 445 mm Total power requirement kW Machine weight approx. t Space requirement approx. m motor-driven decoiler

Tahun pembuatan: 1980, Kondisi: bekas, Pressure 80 t Reach - mm Stroke 50 mm Table area 875 x 695 mm Ram area 350 x 355 mm Ram adjustment 71 mm Strokes per minute 30 - 90 spm Frame opening 450 mm Machine weight approx. 6.2 t Space requirements approx. 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top) 480 mm Additional information: Cedpfx Ajdlcy Hea Tjgp - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen incl. wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine will be safe for manual loading operations with open tools. Before delivery, a current accident prevention inspection (UVV) and brake time measurement will be carried out.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2008, nomor mesin/kendaraan: LSP 100T, Press hidrolik produksi dengan rangka H 100t dengan pemandu Produsen: Stenhoj, Denmark Tahun pembuatan: 2008 Daya tekan maks.: 1.000 kN / 318 bar Silinder tekan, panjang langkah 400 mm Meja tekan dengan alur-T 1.500x900 mm atas 1.500x1.050 mm bawah Jarak antar rangka 1.700 mm Kondisi seperti baru, mesin hanya digunakan untuk uji coba dan sejak itu disimpan di gudang. Cgodpfeg Rn Efsx Aa Top Semua informasi tanpa jaminan. Tanpa biaya transportasi.

Kondisi: bekas, Double-Column Eccentric Press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feeder Machine no. 88151005 Year of manufacture 1988 / 92 Pressing force 160 tons Column clearance 970 mm Side clearance 560 mm Table size 900 x 900 mm Ram surface 900 x 700 mm Die installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Cgedjdzqlvspfx Aa Tjp Strokes per minute 25 to 70 spm Strip width in feeder max. 400 mm Motor power approx. 15 kW Power supply 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency inverter - Semi-automatic stroke adjustment - Ram weight balancing cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided press ram with oil-lubricated slides - UNIDOR press control - Swiveling control panel - Control cabinets of press and feeder mounted together on a platform Platform dimensions 3400 x 2250 mm, height without feet 2950 mm Width of press (without feeder) 2100 mm Depth of press (with drive motor) 2300 mm Overall height of press 4150 mm Net weight of press approx. 18 tons For transport, the drive motor is dismantled and the machine laid on its side. Included: NC roller feeder-straightener ALBA type GGVHY400 Device no. 1405 and 1406, order no. 910708 (year 1992) - ALBA PSS 300 feed control - Feed length steplessly programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm2 - Roller drive of feeder hydraulically controlled - Height-adjustable feeder unit at press for adapting material feed height - External hydraulic unit - Loop straightener with hydraulic opening and closing Total system weight approx. 24 tons Space required for transport: one mega trailer with 3 meters internal height and 13.6 meters loading length Good condition

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), The Coiltech Decoiler Straightener Feeder System is a compact feeding solution designed for press applications. Strip width: 600 mm, material thickness: up to 6.5 mm, straightening rollers: 7 x 115 mm, decoiler capacity: 6,000 kg, inner coil diameter (min-max): 470–520 mm. Connected load: 7.5 kW, supplied with documentation. Cgsdpfxei El Uco Aa Top