Pembungkus palet seluler

ATLANTA - mobiler StretchWickler SFERA Easy PowerStretch 120-400%

Stretch wrapper ATLANTA SFERA Easy
6 individually programmable wrapping programs
Wrapping height: 2150 mm
Mast height: 2050 mm (fits through almost any doorway)
Film power stretch: 120-400%
Motorized pre-stretch system with continuously adjustable settings
Pre-stretch ratio adjustable via control panel from 120% to 400%
Film application tension electronically monitored via control unit
IEF quick-load system for easy film roll change
Film specification: max. outside diameter Ø300 mm – height 500 mm – core Ø76 mm
Film tension can be saved in 4 steps
Geomagnetic compass GMK, always stops at the position it started from
Manual roping feature on the film carriage for additional reinforcement of the wrap

TECHNICAL DETAILS:
Two maintenance-free AGM batteries 12V – 100Ah connected in series
160 pallets per charge – charging time: 8 -10 hours
High-frequency battery charger with LED display
Wrapping height (machine with mast, pallet included): 2,150 mm
Height detection by light sensor or input via display
Protective bar for drive emergency stop
Emergency stop switch compliant with CE regulations
Acoustic warning signal and warning light when machine starts
Fall protection for film carriage
Push buttons for start & stop
Machine operation compliant with CE standards Ø 22 mm

ADJUSTABLE PARAMETERS VIA CONTROL PANEL:
All functional parameters adjustable via display
F00 - Display lock/program change
F02 - Adjustable machine speed around the pallet up to 80 m/min
Carriage speed up & down adjustable independently
F03 - Carriage speed upwards: 1.3 to 5.4 m/min
F04 - Carriage speed downwards: 1.3 to 5.4 m/min
F05 - Number of wraps at pallet base (1–10 wraps)
F06 - Number of wraps at pallet top (1–10 wraps)
F09 - Wrapping height setting
F13 – F16 - Film application tension at base & top wrapping / up & down adjustable independently
F17 – F20 - Film pre-stretch base & top wrapping / up & down adjustable independently
F62 - Ergonomic height for film change
Film consumption display (option for PRS–PS)

SELECTABLE WRAPPING PROGRAMS VIA CONTROL PANEL:
6 storable wrapping programs for SFERA EASY
F01-1 - Cross wrapping (upwards/downwards)
F01-2 - Simple wrapping (upwards only or downwards only)
F10–F11 - Wrapping cycle with predefined start and stop height
F12 - Wrap to a preset height (deactivating height light sensor)
F21 - Wrapping cycle for oversized pallets
F22 / F23 - Wrapping cycle for top sheet application
F29 - Soft start cycle for edge protection application
F30–F31 - Wrapping cycle with reinforcement and adjustable number of wraps
Soft start function to reduce film breakage on sharp pallet edges
Wrapping cycle with manual or motorized roping (optional)

Additional units available from stock in Ludwigsburg.
Was used as a customer replacement unit.
Excellent condition.
Crsdpfx Adsrqgivo Dsh
Immediately available.
Inspection possible in Ludwigsburg by appointment.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.