Kompresor sekrup putar injeksi oli dengan pengering refrigeran terintegrasi ATLAS COPCO GA15 FF

ATLAS COPCO GA15 FF

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), A compressor system from plant manufacturer Rico, comprising two Atlas Copco compressors, two refrigeration dryers, and an oil-water separator system (Beko), also from Atlas Copco, is available. 1) Atlas Copco GA 45 VSD+ screw compressor, year of manufacture: 2020, air flow: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200 mm / 1100 mm / 2000 mm, weight: approx. 860 kg. 2) Atlas Copco GA 45 VSD FF screw compressor, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x Atlas Copco FX 15 refrigerated compressed air dryers, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant charge: 2050 g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900 mm / 750 mm / 1000 mm, weight: approx. 160 kg. 4) Atlas Copco Equalizer 4.0/ES6-MK5 compressor management system, control capacity: 2–6 compressors. 5) Beko ÖWAMAT 15 oil-water separator, throughput capacity range: 6 m³–30 m³/min, oil outlet: DN40, tank volume: 115.5 l, filling volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100 mm / 550 mm / 800 mm, weight: approx. 40 kg. Plant operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible. Isdpfexdc Uvsx Aa Neal

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 20.000 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: GA11VSD+FF, Compressed air system Atlas Copco Comprising: Compressor GA18 Plus, year 2007 Compressor GA11VSD+FF, year 2017 Control unit ES 6 The buyer is responsible for professional dismantling. A forklift will be provided. Ijdpfxjvx Nmfe Aa Nsal

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Operating pressure: 7.75 bar, air flow rate: 40.4 l/s, power: 15 kW, speed: 3000 rpm, machine weight: approx. 450 kg. An on-site inspection is possible. Ijdpjwfg Hhjfx Aa Neal

Kondisi: baik (bekas), HURON MU4 Milling Machine Table size: 1450 x 460 mm Number of T-slots: 5 (16 mm) Longitudinal travel: 1,300 mm Cross travel: 700 mm Vertical travel: 500 mm Spindle taper: ISO 40 (SA40) Number of spindle speeds: 27, from 30 to 2,066 rpm Rapid traverse feed: 2,800 mm/min Maximum table load: 1,500 kg Maximum clearance under head: 530 mm Spindle motor power: 8.8 kW Feed motor power: 3.5 HP Coolant pump: 1.6 HP Overall dimensions (LxWxH): Approx. 2,000 x 2,000 mm Approximate weight: 4 tonnes Iedpfx Aasu Hifzs Njal

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 302827, de-Federhenn Stabprofil-Bearbeitungszentrum (Bohren und Fräsen) SBZ 100G - ZUM VERKAUF IN KOMPLETTLINIE MIT 1 SCHIRMER NC-SÄGE 1000-G4 BAUJAHR 2014 (GESAMTLINIE), SIEHE SCHIRMER-ANZEIGE...!! NC-Zuführeinheit mit Greifer, max. 200 m/min – maximale Profilänge 3500 mm. Der Greifer ist pneumatisch in 2 Achsen verstellbar zur Anpassung an unterschiedliche Profilgeometrien. Bearbeitungsstation als G-Modul mit 2 Servoantrieben in Y- und Z-Richtung ausgeführt. Vorbereitet für die Aufnahme von bis zu 14 Bearbeitungseinheiten für die Komplettbearbeitung von PVC-, Rahmen-, Pfosten- und Flügelprofilen. Ausförderer mit Tisch 2500x1500 mm. PC-Steuerung C 6140, Display, Software SBZ 100G, PLC+NC. Modem für Ferndiagnose. Belademagazin mit 9 Plätzen (9 Profile à 3500 mm), ausgelegt für Rahmenprofile mit max. 127 mm Breite. Barcode-Scanner – horizontaler Gurtförderer mit 9 stufenlos verstellbaren Transportbalken. 18 m/min – 3000 x 2400 mm – Aggregate: Schraubaggregat, 2 x Bohraggregat für Dübel- oder Pfostenlöcher, 2 x Bohraggregat für Befestigungsbohrungen 16.750 U/min, 2 x Zusatzbearbeitung (Kennzeichnung des Schließteils), Bohraggregat für Haustürbeschlag (innen öffnend), Bohraggregat für Olivenlochbohrung (3 Sp), Fräsaggregat Schlosskasten. 2 Stk. Fräsaggregate für das Fräsen und Bohren von Wasserablauf- und Lüftungsschlitzen. 1 Stück davon schräg angeordnet. 1 Schwenkaggregat (MD- und AD-Fenstersysteme). Fräsaggregat für das Fräsen von PZ- und Grifflochmuster. Iajdswnpa Nepfx Aa Nol

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Grafisk Maskinfabrik Drukmaskine Opruller/Slitter Iaodpfxjipvhno Aa Njl

Kondisi: baru, Delivery pressure 10 bar effective delivery rate 252 L/min Tank capacity 90 l / bar Number of cylinders 1 pc. Motor 400 Volt / 1.5 kW V / kW Speed 777 rpm Machine weight approx. 70 kg Ijdpfsvkiztex Aa Nsal Dimensions (LxWxH) 0.97 x 0.5 x 0.9 m

Tahun pembuatan: 2001, jam operasional: 123 h, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 123, Chip silo diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Ijdpoftdv Uefx Aa Noal Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Kondisi: bekas, Tahun pembuatan: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details - Output: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck finish: 29/25 - Operating hours: 47,000 - The machine has been regularly maintained Machine equipped with: - Sidel elevator for preforms to unwinder - Sidel preform unscrambler & feed system - Sidel oven & blowing station for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Ijdpfx Aaorkgy Uj Njal Comprehensive spare parts list available upon request

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.240 kg, jenis bahan bakar: diesel, kapasitas tangki: 135 l, warna: putih, arus keluaran: 130 A, tegangan keluaran: 400 V, frekuensi keluaran: 50 Hz, jenis arus keluaran: tiga fasa, daya nominal: 34 kW (46,23 hp), daya kontinu: 30 kW (40,79 hp), panjang total: 2.200 mm, lebar total: 950 mm, tinggi total: 1.230 mm, kecepatan rotasi (maks.): 1.500 rpm, produsen motor: Deutz, Cummins, Ricardo, jenis pendinginan: air, jenis arus masuk: tiga fasa, Three-phase stationary generator set Proton ZPP 30R (30kW - 34kW) in a compact, weather-resistant, and additionally soundproofed enclosure. The generator is equipped with an external Automatic Transfer Switch (ATS) system (Autostart) and numerous other features listed further in the description. • Model – Proton ZPP 30R SZR • Maximum Power – 34,000 Watt (34kW / 40 kVA) • Rated Power – 30,000 Watt (30kW / 36 kVA) • Ready for Operation – Yes • Type – Industrial generator set • Generator Condition – Brand new • Manufacturer – Proton • Generator Type – Three-phase • VAT Invoice 23% • Year of Production – 2024 • Warranty – 36 months ⊳ ENGINE: Engine model – Ricardo MN4100ZDS Fuel type – Diesel Fuel consumption: - 6.5 litres per hour (at 75% max. power) - 5.0 litres per hour (at 50% max. power) Engine configuration – Inline (R4) Displacement – 4100 cc3 Direct injection Lubrication method – Forced, engine with oil pump ⊳ ALTERNATOR: 100% Copper windings AVR – Yes Alternator model – Proton 184H Rated power 400V – 30,000 Watt (30kW / 36 kVA) Maximum power 400V (up to 15 minutes) – 34,000 Watt (34kW / 40 kVA) Rated current (400V) – 140.0 A Protection circuits – C16, C32, main – 100A Frequency – 50 Hz Alternator construction – Synchronous ⊳ ENCLOSURE: Sound-attenuated enclosure Weather-resistant enclosure Three-phase and single-phase sockets Fuel tank capacity – 135 litres Average runtime per full tank – 20 hours Transport set – Forklift pockets and HDS lifting eyes Iodpfetpvdtjx Aa Njal Dimensions 220 x 95 x 123 cm Gross weight – 1240 kg ⊳ FEATURES: Voltage regulator (AVR) – Stamford SX460 (2%) - Electronic voltage regulation under variable load - Electronic frequency regulation Automatic operation with ATS (Automatic Transfer Switch) Overload and thermal protection Oil pressure sensor, oil level, coolant level sensors Glow plugs Oil sump pre-heater Coolant pre-heater Battery – 2 x 40Ah Automatic battery charger ⊳ CONTROLLER: Controller model – Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and editor Overload protection CAN module extensions Integration with SCADA systems Additional outputs – for 4G, Ethernet, RS232/485 connections Remote control and monitoring via GPRS – Optional Modbus and Ethernet communication – Optional Why choose us? We are a company specializing exclusively in generator sets, operating in this industry for over 17 years, consistently striving to ensure our products represent the highest quality and maximum reliability. During this time, we have delivered solutions to over 10,000 customers across Poland, even in its most remote regions. We select suppliers for our generator components meticulously, ensuring they are leaders in their respective fields. We offer a wide range of generators from 6 to 300kW with various engines, including English Ricardo, American Cummins, and German Deutz, as well as various configurations tailored specifically to customer requirements.