Pusat pemesinan vertikal

AWEA BM1200

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Technical Details X-axis travel: 1200 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Control: Heidenhain iTNC 530 Spindle speed: 6000 rpm Spindle taper: SK 50 Spindle motor (S1): 10 kW Table clamping surface: 1300 x 600 mm Table load capacity: 1200 kg Feed rate: 1-10,000 mm/min Rapid traverse (x/y/z): 20/20/15 m/min Fedpoyrqhbsfx Aagofw Distance table to bottom edge of spindle: 125-725 mm Total power requirement: 25 kVA Machine weight approx.: 7.5 t Machine dimensions: 3600 x 2300 x 3000 mm Additional Information Equipment: * CNC path control Heidenhain iTNC 530 * Electronic handwheel * Spindle oil cooler * 24-position tool changer, double-arm type - Max. tool diameter: 80/150 mm - Max. tool length: 250 mm - Max. tool weight: 8 kg * Preparation for hydraulic machine vice * Preparation for 3D probe * Chip conveyor * Coolant system, through-spindle coolant 20 bar * Machine documentation Operating hours (as of 01.11.2024): - Control on: 60,818 h - Machine on: 59,598 h - Program run: 22,283 h - Spindle on: 19,522 h

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel (X-axis): 650 mm Cross travel (Y-axis): 510 mm Vertical travel (Z-axis): 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm Between spindle centre and underside of counter support: 160 mm Feeds Longitudinal feed: 0–4000 mm/min Cross feed: 0–4000 mm/min Vertical feed: 0–1500 mm/min Rapid Traverse Longitudinal rapid traverse: 4000 mm/min Ffjdpfjwuurwex Aagjw Cross rapid traverse: 4000 mm/min Vertical rapid traverse: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55–3000 rpm Head, swivelling: 0–140° Quill Feed Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Including (not a complete list): • ABENE milling machine • Heidenhain control • Toolholder set • Coolant pump • Levelling feet • Mounting block • Complete operating documentation Precise scope of delivery as shown in photo gallery.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 610 mm, berat benda kerja (maks.): 1.200 kg, tinggi total: 24.920 mm, panjang total: 38.970 mm, lebar total: 30.700 mm, panjang meja: 1.300 mm, lebar meja: 650 mm, daya motor spindle: 11 W, pergerakan cepat sumbu Z: 24 m/menit, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, hidung spindel: Iso 40, kecepatan spindel (maks.): 8.000 rpm, kecepatan spindel (min.): 40 rpm, diameter alat: 75 mm, panjang alat: 250 mm, berat alat: 7 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Vertical machining centre "AWEA BM-1200II" equipped with FANUC 0i-MF Plus CNC Included accessories: - Prepared for rotary table installation - External air blast at spindle - Left-side auger chip conveyors - Automatic high-pressure coolant system through spindle, 20 bar - Workpiece wash-down gun - Enclosure bottom wash system Fodpferhi Rksx Aagjfw - 380-litre coolant collection tank - 3-colour end-of-cycle alarm beacon - Full machine shut-off function

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: Fodpfxjk Hdu Ds Aagofw X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed: 63 – 3,150 rpm Stepless feed: 12–3,000 / 6–1,500 (Z) mm/min Quill stroke: 100 mm Swiveling head +/-: 90° Spindle taper ISO: SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with traverse control, mechanical handwheels, rotatable tilting table ±45°, hydraulic tool clamping, partial enclosure, coolant tank, manual

Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 725 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, 4-axis machining center, year 2016, control: Siemens 840D Solution Line, NC rotary table 360 x 0.001 degrees, 2-station pallet changer, pallet size: 500 x 630 mm, 60-tool magazine, tool holder HSK63, ICS (internal coolant supply), gravity band filter Knoll PF 210/1750, coolant temperature control Hyfra TKR 30, scraper belt conveyor Knoll 450 K-1, infrared probe Ffedpfjrx Sh Aox Aagew

Tahun pembuatan: 1980, Kondisi: bekas, Table length 2,000 mm Table width 1,800 mm Table load capacity 12.5 t Total power requirement 10 kW Machine weight approx. 7.5 t Space requirement approx. [to be completed] m Table size approx. 2,000 x 1,800 mm Maximum table load approx. 12,500 kg Table travel (longitudinal) 1,250 mm Table height above floor 920 mm Longitudinal feed rate 0.63 - 2,000 mm/min Rotary feed rate (based on 1,000 mm Ø) 1 - 3,150 mm/min Rapid traverse (longitudinal) 2,000 mm/min Rapid traverse (rotary, based on 1,000 mm Ø) 3,150 mm/min Machine weight 7,500 kg External dimensions (LxWxH) 3,700 x 2,100 x 920 mm Drive output total 10 kW - 380 V - 50 Hz Accessories / Special equipment - Steel telescopic covers for the guideways - Infinitely variable table feed - Optical display for setting and reading the longitudinal adjustment - Optical angle setting and reading device Condition: satisfactory to good - ready for demonstration Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Fedpfx Aaet Hwq Rjgefw We kindly ask you to review our offer. Please always enquire about your requirements for good used machines with us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.600 mm, Jarak Gerak Ffjdsyifpfjpfx Aagsw Sumbu x: 3500 mm Sumbu y: 2500 mm Sumbu z: 1600 mm Meja Kerja Meja putar NC: 2200 x 1800 mm Kapasitas beban meja maks.: 12.000 kg Putaran spindel maks.: 2.500 rpm Konektor alat: ISO-50 Aksesori: - Konveyor serbuk/kerokan

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 1.200 h, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 1.100 mm, daya: 46 kW (62,54 hp), jarak antara pusat: 2.000 mm, jam kerja: 1.200 h, Sebuah mesin bubut DMT CD1100 dengan kontrol Heidenhain dan hanya 1.200 jam kerja tersedia. Area kerja mencakup diameter putar sekitar 1.100 mm di atas ranjang dan sekitar 800 mm di atas eretan. Pemegang alat adalah Multifix D1. Jarak pusatnya 2.000 mm. Ffjdpfsxlza Hsx Aagsw Penggerak utama spindle menggunakan motor 46 kW pada 60% ED dengan dua tingkat gigi. Kepala lepas: - Diameter pinol: 125 mm - Konektor kerucut: 6 Mk Pengiriman: Pengambilan mandiri Pembayaran: 100% sebelum pengambilan melalui transfer bank segera setelah faktur diterbitkan Semua informasi tidak mengikat, penjualan diutamakan bagi yang lebih dulu mengambil. Mesin dijual tanpa klaim garansi dan tetap menjadi milik kami hingga pembayaran lunas.

Kondisi: baru, Tahun pembuatan: 2026, Completely overhauled, as-new machine, upgraded to the legally required current safety standard 'state of the art,' in accordance with the Operational Safety Ordinance of the Employers' Liability Insurance Association. Control Cabinet Electronics Installation of a new CE-compliant control cabinet according to the latest statutory requirements of the Employers' Liability Insurance Association: BGVA 3 / DIN-EN 60204-1, new machine standard. Optional: The entire machine can be supplied in CE configuration. A CE Declaration of Conformity will be issued for the machine, making FPS Werkzeugmaschinen GmbH the official manufacturer. This ensures compliance with the OPERATIONAL SAFETY ORDINANCE (BetrSichV). The machine's year of manufacture is thus equivalent to the delivery date. Standards complied with: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control 3-axis FPS Active digital display Speed 25 - 2500 rpm, geometrically stepped direct gearbox with 18 speed settings for maximum torque / milling performance Feed 5 to 500 mm/min, stepless adjustment Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 100 mm, SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Travel X/Y/Z: 800/300/400 mm Table Fixed angle table 1000x440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90 ° Options • Z-axis bellows • Chip tray Ffodsh Sptnjpfx Aagjw • Machine light • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc.

Kondisi: bekas, Tahun pembuatan: 2006, Technical Details: X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Spindle speed: 12,000 rpm Ffedpfx Aspumdcoagew Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle power: 52 kW / 430 Nm Total power requirement: 87 kVA Approx. machine weight: 15 t Horizontal machining center with pallet storage, NC rotary table, 2-station pallet changer, Internal coolant supply (IKZ) 40 bar, Prepared for Renishaw MP 10 infrared probe (probe not included), Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Compressed air through spindle center, Electric oil mist extraction, Electronic handwheel, TRANSMIT function, High-precision package, BA 4, Laminated safety glass panel on the right door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, stacker crane, central controller, and 10 pallets Approx. 98,500 operating hours (main switch ON) Approx. 45,500 spindle hours