Pusat mesin

AXILE G6i

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 107.44.00.407, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, berat benda kerja (maks.): 500 kg, tinggi total: 3.200 mm, lebar total: 3.200 mm, lebar meja: 600 mm, tinggi meja: 2.400 mm, panjang meja: 600 mm, kecepatan rotasi (min.): 50 rpm, kecepatan rotasi (maks.): 20.000 rpm, berat keseluruhan: 10.000 kg, kecepatan spindel (maks.): 20.000 rpm, daya motor spindle: 15.000 W, jumlah spindel: 1, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, MIKRON-UCP800Duro-2018 Bjdex D Ux Tjpfx Am Iewl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 31.460 h, jarak pergerakan sumbu X: 935 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 650 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530 HSCI, beban meja: 1.500 kg, kecepatan spindel (maks.): 18.000 rpm, jumlah slot dalam magazin alat: 60, jumlah sumbu: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It offers an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine features a robust table diameter of 1,040 mm and a maximum table load capacity of 1,500 kg. If you are looking for high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining center we have for sale. Contact us for further details. Bwsdpfx Ameyt Rdrs Iol • Maximum feed rate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operation mode 4: Machining process control (operation with open work area door allowed) • Repairs/Maintenance: • C-axis seal replaced shortly after warranty period (upgraded version) • Spindle replaced (05/2021) • Machine calibrated last year - circular interpolation (ballbar test) within tolerance • Typical application: • Duralumin machining 80% in total • 3-axis: 50% • 5-axis: 40% (up to 10% simultaneous 5-axis) Additional equipment • Touch probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electronic handwheel • Air gun • Chip conveyor Technical Specification Taper size HSK 63

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Data Umum Lebar: 2300 mm Kedalaman: 4400 mm Tinggi: 3100 mm Berat mesin: 7000 kg Unit Kontrol Model: Siemens 840 D Penggerak Utama Bwodsx D Narepfx Am Iol Kisaran kecepatan spindel: 10.000 Pergerakan Pergerakan Sumbu X: 2500 mm Pergerakan Sumbu Y: 900 mm Pergerakan Sumbu Z: 850 mm Peralatan Slot dalam penyimpanan: 40 Hexagon PIONEER 061006 ini diproduksi pada tahun 2013. Mesin CMM yang andal, menawarkan pengukuran dimensi yang presisi untuk kontrol kualitas dalam manufaktur. Ideal untuk memastikan akurasi dan konsistensi produk. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pengukuran

Kondisi: baru, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 820 mm, jarak gerak sumbu Z: 610 mm, tinggi benda kerja (maks.): 450 mm, berat benda kerja (maks.): 500 kg, jumlah slot dalam magazin alat: 60, produsen pengendali: HEIDENHAIN, berat keseluruhan: 14.000 kg, model controller: TNC 7, pasokan pendingin: 40 batang, daya motor spindle: 32 W, pergerakan cepat sumbu Z: 48.000 m/menit, gerak cepat sumbu X: 48.000 m/menit, pergeseran cepat sumbu Y: 48.000 m/menit, diameter meja putar: 630 mm, kecepatan rotasi (maks.): 12.000 rpm, hidung spindel: SK 40 BIG PLUS (BVD 40), diameter alat: 150 mm, panjang alat: 300 mm, berat alat: 8 g, diameter benda kerja (maks.): 750 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, en-GB Bjdpfsp Nnutex Am Iowl

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, GF Machining Solutions FORM X600 Year of manufacture: 2019 – Factory overhaul: 2022 C-frame design, fixed table with lowering tank Travel (X/Y/Z): 600 x 400 x 500 mm Distance table–quill: 200–700 mm Max. workpiece size (L x W x H): 1200 x 800 x 350 mm Max. workpiece weight: 2,000 kg Integrated C-axis for rotation, indexing, and EDM (U=0–100 rpm) Pneumatic chuck of choice (Erowa/3R Systems) ISPG generator with 80 amps Best achievable surface finish: Ra 0.08 µm Bjdpfx Aswh Sigjm Iewl AC FORM HMI operating interface 15” LCD color screen, mouse or touchscreen, lift keyboard, and manual control Includes 3R Systems WorkPartner WPT1+ - 150 electrode positions - 10 pallet stations Net weight of the unit: 5,504 kg Machine dimensions: 1,790 x 2,860 x 3,100 mm The machine will be cleaned, serviced, and tested by us upon receipt of order. Options: - Commissioning and operator training - Transport and installation - Chiller unit - Dielectric fluid

Kondisi: bekas, Tahun pembuatan: 2010, Maximum turning diameter: 320 mm Turning length: 810 mm Control: MSX 701 Maximum spindle speed: 6,000 rpm Main spindle drive power: 22 / 18 kW Maximum bar capacity: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Maximum counter spindle speed: 6,000 rpm Counter spindle drive power: 22 / 18 kW Maximum bar capacity (counter spindle): 52 mm C-axis (counter spindle): 0.001° Spindle nose (counter spindle): JIS A2-5 Bjdpfx Aov E R E Asm Iewl Collet chuck (counter spindle): 140 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Driven tool drive power: 7.5 / 5.5 kW Y-axis travel: 110 mm Number of tool stations (lower turret): 16 positions Number of driven tool stations (lower turret): 16 positions Speed range – driven tools (lower turret): max. 6,000 rpm Driven tool drive power (lower turret): 7.5 / 5.5 kW X-axis travel (1/2): 210 mm Y-axis travel: 110 mm Z-axis travel (1/2): 810 mm B-axis travel: 900 mm Total power requirement: 86 kVA Machine weight approx.: 8.1 t Space requirement approx.: 8.0 x 3.5 x 2.8 m CNC Turning and Milling Center MORI SEIKI - NZ 1500 T2Y - Main spindle and counter spindle - 2 turrets, top and bottom - Y-axis - 2x 16 driven tool positions

Kondisi: bekas, Tahun pembuatan: 1995, schleifmaschine-parameter-2024 Bodjyatx Sepfx Am Iowl

Kondisi: bekas, Tahun pembuatan: 2012, X-axis travel 630 mm Y-axis travel 800 mm Z-axis travel 750 mm Control SIN 840D sl Siemens B-axis 360 x 0.001° Bwjdpfxjvxwxve Am Iol A-axis -200 to +25 x 0.001° Spindle speed – infinitely variable 20 - 18,000 rpm Drive power 100% duty cycle 28.00 kW Drive power 40% duty cycle 34.00 kW Torque at 40% / 100% duty cycle 110 / 84 Nm Tool holder HSK 63 Feed rate X/Y/Z axis 1 - 100,000 mm/min Rapid traverse X/Y/Z 100.00 m/min Feed force X/Y/Z 9 / 6 / 9 kN Feed rate B axis 1 - 14,400°/min Feed rate A axis 1 - 7,200°/min Pallet size 2x 500 x 500 mm Max. workpiece weight 400 kg Max. workpiece diameter 800 mm Max. workpiece height 800 mm Tool magazine with 63 positions Max. tool diameter 280 mm Max. tool length 550 mm Max. tool weight 15.00 kg Total power requirement 65.00 kW Machine weight approx. 14.00 t Space required approx. 5.50 x 3.50 x H3.20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage monitoring, emulsion mist extractor. Machine was operated in a production line, therefore supplied without chip conveyor and without coolant system.

Kondisi: baru, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.000 mm, beban meja: 10.000 kg, kecepatan spindel (maks.): 6.000 rpm, panjang meja: 1.800 mm, lebar meja: 1.800 mm, gerak cepat sumbu X: 30.000 m/menit, pergeseran cepat sumbu Y: 30.000 m/menit, pergerakan cepat sumbu Z: 30.000 m/menit, posisi kepala milling: Universal-Diagonal-Fräskopf, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, LAGUN TM 4 T-Design Travelling Column Machining Center The LAGUN TM 4 is a highly rigid travelling column machining center in T-design, engineered for heavy-duty and precise machining operations. Ideal for both single-part and series production, meeting the highest demands for rigidity, accuracy, and reliability. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Leasing/financing options available ✔ No special foundation required (standard industrial floor sufficient) ✔ 24-month warranty Why choose LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING), renowned for robust construction, high dynamics, and decades of experience in building bed-type milling machines. These machines impress with high reliability, ease of maintenance, and cost-effective operation. Technical equipment: Control system: HEIDENHAIN TNC 640 CNC path control + 19" TFT display HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (IKZ) 36 bar Tool changer: 60-position chain magazine with double gripper Chip removal: Dual hinged belt conveyor (front and rear) Bwsdpfx Asq I Nkbjm Iel Enclosure: Full perimetric enclosure Accuracies: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we are happy to advise you and prepare a customized offer.