Bagian baja geser

AYEL-TECH Q35Y-16

Kondisi: sangat baik (bekas), Four-sided planer SCM Compact XL - Planing width: 23 cm - Planing height: 13 cm - Electric adjustment of top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle 4 kW, right and left each with 7.5 kW motor, top 5.5 kW, universal spindle 5.5 kW Machine in very good condition Iedpelat Hdsfx Akpjth

Kondisi: baru, Tahun pembuatan: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Itjdpfx Asg U Uv Rskpsh Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting capacities 0° round (pipe): 220 mm 0° round (solid): 120 mm 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.400 W, jumlah sumbu: 3, This 3-axis vertical machining center HAAS VF-4SS was manufactured in 2008. It features a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer with 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, you should consider the HAAS VF-4SS we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feedrate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min Iodpfjx D Irmsx Akpeth • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment • Auger-type chip conveyor • Additional high-pressure filtration system

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2008, Used RAS 86.33 Swing Beam Guillotine Shear with Newly Sharpened Upper and Lower Blades, Regularly Serviced and Seldom Used Technical Specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Backgauge depth: 5–1,000 mm Working height: 800 mm Strokes per minute: 30–64 spm Connections: 400 V / 50 Hz / 40 A 3 PE / Three-phase current Power consumption: 18.5 kW Isdpov Tk Exefx Akpoth Machine width: 3,830 mm Machine depth without angle gauge: 2,195 mm Machine depth with angle gauge: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame throat: 100 mm Tank capacity: 150 l

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 527, 23035 Technical specifications (approx.): - Punching force 30 T Iedpfx Aelnkc Uokpeth - Max. sheet thickness 10 mm - Max. punching diameter 105 mm - Punching capacity: - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke 7 – 70 mm - Throat depth 560 mm - Max. number of strokes 120 SPM - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - Equipped with: - back gauge table with stops - foot switch - emergency stop button - quick-change punch tool device - various punch and die holders

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Unit Kontrol Iedpfx Akex Enh Tepeth Merek: HAAS Model: NGC Penggerak Utama Jumlah sumbu: 3 Pergerakan Pergerakan Sumbu X: 1270 mm Pergerakan Sumbu Z: 635 mm Pergerakan Sumbu Y: 508 mm Pusat pemesinan vertikal 3-sumbu HAAS VF-4 ini diproduksi pada tahun 2020. Memiliki gerak sumbu X 1270 mm, sumbu Y 508 mm, dan sumbu Z 635 mm dengan kapasitas beban meja hingga 1588 kg. Dilengkapi dengan majalah alat 20 stasiun, ekstraktor auger chip, dan probe alat Renishaw OTS. Manfaatkan kesempatan untuk membeli pusat pemesinan vertikal HAAS VF-4 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Milling

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.000 mm, daya: 13 kW (17,68 hp), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a pendulum head and a 750 mm diameter grinding plate. With the appropriate tooling, the machine can be used for polishing, satin-finishing, and bush hammering the surfaces of both hard stones and soft stones (such as marble). Iedpforpi E Ajx Akpjth

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 305 mm, masa garansi: 24 bulan, daya: 30 kW (40,79 hp), OMAX MAXIEM 2040 3D, 30 kW MAXIEM pump and A-JET bevel cutting head Comprehensively overhauled with manufacturer certification and two-year warranty. Itodpsrm Ilfofx Akpjh The configuration of the waterjet cutting system can be freely selected. Please feel free to contact us and let us know your configuration requirements. For customers seeking efficient and cost-effective waterjet cutting systems, the modular MAXIEM Line is the perfect solution. These powerful MAXIEM systems combine operational flexibility with affordability and can be expanded with a wide range of accessories to suit your cutting requirements. With the modular MAXIEM Line, OMAX offers robust, reliable waterjet cutting technology at an attractive entry-level price, making the benefits of this technology accessible to many applications. Financing via leasing is available on request under very attractive terms, for example up to 86 months. - Precision up to ±0.05 mm - Software and machine components featuring the latest state-of-the-art OMAX technology With the 3D cutting head A-JET, the MAXIEM achieves a cutting accuracy of under 0.1 mm. The 3D head allows for bevel cuts up to 60° and compensation for cutting angle deviations. The machine is currently being overhauled, so the images are illustrative and similar to the offer. Prompt delivery can be arranged with INNOMAX AG.

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Itodpfxod N H A Ne Akpeh Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition

Kondisi: baik (bekas), Tahun pembuatan: 1988, de-to-hu-it-lt-lv-nb-nl-pl Itedpfx Aev Tpxqekpjh