Grapel Polip / Grap Poli

Aymas

Kondisi: baru, Tahun pembuatan: 2025, • Shearing force: 700 t • Holding clamp force: 120 t • Box closing force: 240 t • Pusher ram force: 150 t • Cutting width: 800 mm • Box length: 6,000 mm Rsdpjdd Tp Refx Ad Rjr • Box width (open): 2,550 mm • Box width (near/closed): 800 x 600 mm • Electric power: 2 x 90 kW • Maximum operating pressure: 315 bar • Capacity: 15 – 20 t/h (iron/steel) • Shearing capacity: 12 – 16 t/h (iron/steel) • Weight: 70,000 kg

Kondisi: bekas, Tahun pembuatan: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, thus featuring a reinforced gearbox and reinforced cutting frame. — Features / Scope of delivery: - 1 set armored shafts HW 8/10 with combs and re-breaking bar, suitable for scrap and waste - 1 set used shafts HW 8/10 with combs and re-breaking bar, likewise for scrap and waste - DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 hp) Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: tracked, hydraulically driven Areas of application: scrap, commercial waste, bulky waste, mixed waste, wood, recycling materials — Condition: - Well-maintained machine - Fully functional - Sale as inspected on site Additional Information / Service History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally according to the manufacturer's specifications and documented. Rsdpfxox Nkhqo Ad Rsr Notes: • Sale is made excluding any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information is provided without guarantee. The seller assumes no liability for possible errors, incompleteness or changes to the information provided. Sale is made exclusively subject to prior sale.

Kondisi: baru, Tahun pembuatan: 2024,

Kondisi: baru, Tahun pembuatan: 2025, Also available in various models! 1. Bale size: 500 mm x 500 mm x ... 2. Container dimensions (width x length x height): 2000 mm x 2500 mm x 1100 mm 3. Capacity: 15–20 tons/hour (steel) 4. Cycle time: 90 seconds (idle) 5. Upper lid cylinder thrust: 90 tons 6. Preliminary pressure of compression cylinder: 150 tons 7. Main compression ram thrust: 300 tons 8. Maximum operating pressure: 300 bar 9. Electric motor: 2 x 75 kW = 150 kW 10. Machine dimensions (width x length x height): 10,000 mm x 10,000 mm x 4,000 mm 11. Machine weight: 55,000 kg 12. An ejector door will be provided. 13. Regrindable and square-edged blades. 14. Container walls will be lined with HARDOX 450-500 material. 15. An automatic SKF fluid lubrication system is integrated into the compression chamber. 16. There will be an automatic SKF lubrication system for bushing lubrication. 17. Piston rods are induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system are from the brands PARKER or EATON VICKERS & KAWASAKI. 19. A bypass filter will be added to the hydraulic system. Redjgwa T Repfx Ad Rer 20. An AKG hydraulic oil cooling system will be provided. 21. All electrical components are from SIEMENS or SCHNEIDER. 22. The machine will be fully automatic with PLC control, Siemens make and model. In addition, there will be a SIEMENS HMI Simatic Panel with touchscreen, emergency stop buttons will be provided at critical points. 23. The edges of the upper cover and the sides of the scrap chamber are equipped with blades made of 2767 material (hardness 55 HRC). 24. The machine will be under AYMAS Makina San. Ve Tic. Sti. warranty for 1 year or 2,500 operating hours, whichever comes first in the event of manufacturing defects.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 1.530 h, Fungsionalitas: berfungsi sepenuhnya, daya: 129 kW (175,39 hp), Dijual Arjes Impaktor 250 EVO Tahun pembuatan: 10/2022 Jam operasional: 1530 Dilengkapi dengan poros dayung untuk kayu, plastik, limbah industri, dll. Poros beton juga termasuk. Redpfx Adew Nyt Is Rjr Mesin dalam kondisi fungsional penuh dan dapat diperiksa saat beroperasi.

Kondisi: baru, Tahun pembuatan: 2025, Also available in different models! Rjdjgwa Urspfx Ad Rsr 1. Briquette diameter: Ø 80 mm 2. Capacity: 700–900 kg/h (copper) 3. Preliminary pressing ram force: 12.5 tons 4. Main compression cylinder force: 250 tons (5 tons/cm²) 5. Maximum operating pressure: 300 bar 6. Cycle time: 12–14 sec 7. Electric motor power: 30 kW 8. Machine dimensions (W x L x H): 2200 mm x 2600 mm x 2800 mm 9. Machine weight: 6,000 kg 10. Screw conveyor feeders automatically fill the compression chamber, and the integrated vibrating hopper protects the chamber by preventing oversized material from entering. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system is implemented. 13. Pumps and valves in the hydraulic systems are sourced from globally recognized brands such as PARKER. 14. The machine is fully automatic via PLC control. 15. All electrical and electronic components are from SCHNEIDER or SIEMENS brands. 16. The machine is CE-certified. The marking confirms that the product complies with European directives regarding consumer safety, health, and environmental requirements. 17. The machine is covered by a warranty from AYMAS Makina San. Ve Tic. Ltd. Şti. against manufacturing defects for one (1) year or three thousand (2,500) operating hours.

Kondisi: baru, Tahun pembuatan: 2025, 1. Total power output of the electric motors: 2 x 45 = 90 kW 2. Machine weight: 12,000 kg 3. Shredding capacity: 3–4 tons/hour (aluminum profiles, drums, refrigerators, etc.; steel thickness up to 3 mm and waste) 4. Cutting blades are made from HARDOX 500 material. Blade thickness is 6 cm and they are hardfaced with an HRC 60 coating via welding. Blades are easy to replace. 5. Loading chamber dimensions: 800 mm x 1200 mm 6. The chamber walls are lined with HARDOX 500 material. 7. The entire machine body is sandblasted prior to painting. 8. Two base coats and one top coat of paint are applied. 9. Rotor movement is powered by an electric motor coupled with a gearbox. 10. The rotors operate independently from one another. 11. The shredder can be loaded by means of grapples or conveyor belts. 12. In case of a blockage between the rotor blades, the machine reverses the rotors to clear the jam. 13. Once the blockage is cleared, the rotors resume normal operation. If the blockage persists, the machine automatically stops and an audible alarm is triggered. Rodpfx Adogwcfzj Rer 14. A hydraulic oil cooling system is installed. 15. Rotors are independent and operate at 18-20 rpm. 16. Hydraulic system components are supplied by PARKER or EATON-VICKERS & KAWASAKI brands. 17. All electrical components are from SCHNEIDER and SIEMENS brands. 18. The machine is fully automatic, equipped with SIEMENS S7-1200 PLC control. 19. The machine is certified according to ISO 9001 by URS and CE by SGS. 20. The machine is covered by AYMAS MAKINA San. Ve Tic. Sti. warranty against manufacturing defects for one (1) year or (2500) operating hours.

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Track gauge approx. 20.0 m Lifting height approx. 8.0 m Manufacturer/refurbishment: HILGERS/TEICHMANN Conversion/refurbishment: 2000/2023 Rjdpfx Adeqfc Ego Rjr Crane equipped with: - Double-rail trolley with 4-corner wire rope system - Magnet system prepared - Radio remote control - Optional with magnet beam or spreader

Kondisi: baru, Tahun pembuatan: 2025, Different models available! 1. Bale size: 400 mm x 400 mm x ... 2. Hopper dimensions (width x length x height): 800 mm x 2500 mm x 800 mm 3. Capacity: 3000 - 4000 kg/hour (iron and steel) 4. Cycle time: 90 seconds 5. Upper lid cylinder pressure: 90 tons 6. Pre-compression cylinder pressure: 140 tons 7. Main compaction ram force: 210 tons 8. Maximum operating pressure: 300 bar 9. Electric motor: 37 kW 10. Machine dimensions (width x length x height): 3400 mm x 6800 mm x 3000 mm 11. Machine weight: 18,000 kg 12. Hopper walls are covered with HARDOX 450 - 500 material. 13. Piston rods are induction-hardened and chrome-plated. 14. Pumps and valves used in the hydraulic system are branded products such as PARKER, BOSCH-REXROTH, EATON-VICKERS, or KAWASAKI. 15. An oil cooling system is included. 16. The machine is fully automatic with PLC control. 17. All electrical components are German brands, SCHNEIDER or SIEMENS. 18. An automatic loading shovel is integrated into the machine. 19. The machine is CE and GOSTR certified. The labeling confirms that the product meets consumer safety, health, or environmental requirements. Rodpfx Adedfc Iyj Rsr 20. The machine comes with an AYMAS Makina San. ve Tic. Ltd. Sti. warranty against manufacturing defects for one (1) year or 2,500 operating hours.

Kondisi: baru, Tahun pembuatan: 2025, 1. Total power of electric motors: 360 kW 2. Machine weight: 44,000 kg 3. Shredding capacity: 10 - 15 tons/hour (iron & steel) 4. Number of blades: 78, blade thickness: 150 mm. 5. Loading chamber dimensions: 2350 x 4085 mm 6. Shredding chamber dimensions: 1500 x 2000 mm 7. Blade replacement and maintenance can be easily performed from the top of the chamber. 8. Cutting blades are manufactured from material no. 2767. 9. Main shafts are made from material: 42 CrMo4, 32-34 HRC (torsion- and fracture-resistant). 10. All chamber walls are lined with wear-resistant HARDOX 500 steel. 11. All static lamellae and spacer rings are manufactured from HARDOX 450. 12. Speed: 4.5 - 6 rpm 13. The drive force of the shafts is provided by four planetary gearboxes powered by four power-controlled, bi-directional hydraulic motors. Hydraulic equipment is from PARKER or BOSCH-REXROTH brands. 14. Separate cooling units are supplied for hydraulic oil and gearbox oil. 15. Each shaft can operate independently. 16. The shredder can be loaded by crane. 17. The machine stops and emits an audible warning with the help of safety sensors to protect the machine from damage. 18. An automatic centralized lubrication system ensures the bearings are kept lubricated. 19. All electrical components are from SCHNEIDER and SIEMENS brands. 20. The machine is fully automatic with PLC control. The control panel features a touchscreen for easy access to machine settings and process monitoring. 21. The machine is covered by a warranty from AYMAS MAKINA San. Ve Tic. Ltd. Sti. against manufacturing defects for one (1) year or three thousand (2500) operating hours. 22. The machine is CE certified. The certification confirms that the product meets the European directives concerning consumer safety, health, and environmental protection. Rjdpedfc Uzsfx Ad Rer

Kondisi: baik (bekas), TECHNICAL DATA: - Profile dimensions: 550 x 210 mm - Material thickness: T = 17.2 mm | S = 11.1 mm Rjdoxhv Rxspfx Ad Ror - Material color: white or grey - Condition: used INVENTORY: approx. 10 pcs | Length: 6,188 mm approx. 10 pcs | Length: 6,190 mm approx. 35 pcs | Length: 6,388 mm approx. 15 pcs | Length: 6,588 mm approx. 20 pcs | Length: 5,650 mm Remaining stock available in lengths: 6,190 - 6,690 mm PRICING: Price per meter: €47.00 net per meter Quantity discounts available for larger orders YOUR CONTACT PERSONS AT DLK: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping can be arranged at an additional cost. The extra charges are dependent on the delivery location and the volume of the shipment and can be requested from us individually. TERMS OF PAYMENT Payment terms are to be agreed upon in case of an order. All prices are quoted as unit/net prices or as specified in the item description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanines, textile storage systems as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. For any questions, please do not hesitate to contact us. “Four wins” – The four key elements of DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Kondisi: baru, Tahun pembuatan: 2025, - Shearing force: 1,600 tonnes - Capacity: up to 70 tonnes per hour Redpfx Adogv Acuo Ror - Side compression force: 2 x 220 tonnes - Clamp pressure: 250 tonnes - Motor: 480 kW - Machine weight: 150,000 kg - PLC controlled - Remote control available - Adjustable output length

Kondisi: baru, Tahun pembuatan: 2025, - Cutting force: 1,350 tons - Capacity: up to 50 tons per hour - Side compression force: 2 x 180 tons - Clamp pressure: 250 tons - Motor: 396 kW - Machine weight: 120,000 kg - PLC controlled - Remote control available Rjdpfjgv Abpex Ad Rjr - Adjustable discharge length

Kondisi: baru, Tahun pembuatan: 2023, de_DE Rjdpok Iy Hmofx Ad Rjr

Kondisi: baru, Tahun pembuatan: 2025, Several models available! 1. Briquette diameter: Ø 160 mm Rodpogv I Ihjfx Ad Rjr 2. Capacity: 4,500 – 5,500 kg/hour (iron and steel) 3. Preliminary pressing force: 50 tonnes 4. Main compression cylinder pressure: 600 tonnes 5. Maximum operating pressure: 300 bar 6. Cycle time: 12 – 14 seconds 7. Electric motor power: 170 kW total 8. Machine dimensions (width x length x height): 5,200 mm x 8,000 mm x 3,100 mm 9. Machine weight: 42,000 kg 10. Screw-drive feed units automatically fill the compression chamber, and the integrated vibrating hopper ensures chamber safety by directing oversized material into the chamber. 11. Piston rods are induction-hardened and chrome plated. 12. Hydraulic oil cooling system is implemented. 13. Hydraulic system pumps and valves are from PARKER or BOSCH-REXROTH brands. 14. Machine is fully automatic via PLC control. 15. All electrical and electronic components are supplied by SCHNEIDER or SIEMENS. 16. The machine is CE-certified. The CE marking certifies that the product complies with European directives regarding consumer safety, health, or environmental protection. 17. The machine is covered under warranty by AYMAS Makina San. Ve Tic. Ltd. Şti. against manufacturing defects for one (1) year or three thousand (3,000) operating hours.