Sistem konveyor

Bandanlage LORENZ BRM 50/820.7 - HH 7500.1

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 550 mm, kecepatan spindel (maks.): 2.066 rpm, berat keseluruhan: 4.000 kg, heidenhain 3-axis digital readout drive feed unit Ffodpfx Aowqcv Nsagsw automatic lubrication external electrical cabinet table size: 2000 x 460 mm travel: 1500 x 700 x 550 mm weight: 4,000 kg

Kondisi: baik (bekas), Technical Data: Working width: 4050 mm Maximum bending capacity: 6.0 mm Maximum pre-bending: 4.0 mm Top roll diameter: 210 mm Side lower roll diameter: 210 mm Central lower roll diameter: 210 mm Conical bending device by tilting both side rolls Hydraulic drop-end bearing Swiveling control panel with digital display Ffjdpfewkaalsx Aagjw Dimensions (Length x Width x Height): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine’s visual appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Fedpfefxyhfox Aagjfw Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, jam operasional: 11.500 h, nomor mesin/kendaraan: 3098, jam kerja laser: 6.900 h, daya laser: 10.000 W, ketebalan lembaran (maks.): 30 mm, ketebalan pelat baja (maks.): 30 mm, daya: 10 kW (13,60 hp), tahun perombakan terakhir: 2024, jangkauan kerja: 4.020 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, unit pendingin, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series, equipped with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • High-performance Donaldson DFPRO 6 filtration system with 7.5 kW power Technical data: Machine model: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guideways: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % Laser cutting head: EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fsdpfx Aaevw Tdlegefw Fully automatic drilling spindle Technical data: Drilling range: Ø 4 mm - Ø 30 mm Tapping range: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic tool measurement Pneumatic hold-down device Chip removal brush Donaldson® filter unit DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Airflow: 4,500 m³/h Asper Nesting® | Automatic nesting software With Witt gas mixer The machine has always been operated with a maintenance and support contract.

Kondisi: baru, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will provide you with an attractive offer including installation and service. ISGEC has delivered to over 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to hearing from you. Ffedpef Rt Irofx Aagew

Tahun pembuatan: 2000, Kondisi: diremajakan ulang (bekas), System for filling, cooling, and sealing plastic suppository casting packages. The line was completely overhauled both mechanically and electronically in 2019 and is like new. Ffsdpfx Aasfc I Haegjw Prior to delivery, the system is tested with suppositories supplied by CP-Citopac GmbH. For further technical details, please refer to the data sheet.

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Fjdpfxehigmbj Aagofw Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Fodpjgpxc Sjfx Aagefw Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet

Kondisi: baik (bekas), Tahun pembuatan: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Ffjdpfx Aaehrnbkegjw Without control cabinet.

Tahun pembuatan: 2003, Kondisi: bekas, Press force 100 t Stroke 10-130 mm Strokes per minute 30-90 spm Throat depth 330 mm Ram adjustment 100 mm Table area 950x660 mm Ffedpfx Aaera Rr Ejgjw Ram area 540x440 mm Passage opening in table Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW straightening and feed machine VRMA 40/78, year of construction 2003 Feed controller HDS 50 BSA decoiler NO20/400V-AP