Motor sinkron tiga fase 11 kW

Baumüller SEW DSOG 100-K

Kondisi: baik (bekas), Three-phase synchronous motor, geared motor, electric motor - Three-phase synchronous motor: Baumüller type DSOG 100-K - Gearbox: SEW-Eurodrive type KA86 LP112 - Speed: 3000 rpm - Power: 11 kW - Brake - External fan - Design: hollow shaft - Shaft diameter: Ø 70 mm Gsdpeb A I Ahefx Agroiu - Brake - Protection rating: IP 54 - Weight: 150 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, CNC lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and subspindle Control: Mazatrol PC Fusion CNC 640T Technical data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Tool turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time - 1st position: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Gedpfsx Hgl Hox Agroiu Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Max. load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM-Type) / changer: Magazine capacity: 30 tools System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Giodpsifn N Nofx Agrsu Coolant, chip, and compressed air management: Coolant system incl. 300-liter tank and pumps External coolant around spindle Chip spirals right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Fully enclosed Work light Heat exchanger on control cabinet Auto power off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation space: W3,160 x D3,000 x H3,000 mm (including chip conveyor discharge to the left) Machine weight: approx. 5,400 kg (net) Included special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 slots, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis driver Coolant, chip, and compressed air management: - Bed wash - Through-spindle coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip bin (chip discharge front to left machine side) Measuring and monitoring systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage control in the machine, incl. holder - Auto-door (side door) - Pneumatic interface for workpiece clamping - Included clamping devices as shown with RoboJob Mill Assist 25kg (Year 2025 - NEW) - Full enclosure - Double gripper Immediately available

Kondisi: bekas, Tahun pembuatan: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Gjdexmagujpfx Agrjiu Control system: PC Fusion CNC 640 T Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Distance spindle nose to turret face: 115 - 690 mm Spindle speed range (main spindle): 35 - 4,000 rpm Main spindle drive power: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum usable bar diameter: 64 mm Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Speed range (driven tools): 25 - 4,500 rpm Drive power (driven tools): 3.7 kW Maximum torque (driven tools): 35 Nm Speed range (sub spindle): 35 - 4,000 rpm Drive power (sub spindle): 7.5 kW Maximum torque (sub spindle): 57 Nm Maximum chuck diameter (sub spindle): 150 mm X-axis travel: 190 (185 + 5) mm Z-axis travel: 575 (580 + 5) mm Sub spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed range X/Z: 0 - 5,000 mm/min Feed range C: 1 - 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC Turning and Milling Center MAZAK - Super Quick Turn 250 MS - Main and sub spindle - Driven tools - C-axis

Kondisi: bekas, System: used piston diaphragm high-pressure pump / feed pump Giodpfx Agsdkdi Tsrou Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa

Kondisi: bekas, Tahun pembuatan: 1989, Well-maintained used GEIBEL+HOTZ surface grinding machine, model FS 50 SA Grinding area: 500 x 250 x 375 mm Vertical automatic feed Equipped with a fine-pole electromagnetic chuck Grinding wheel diameter: 300 x 50 x 76.2 mm Includes paper band filtration system and manual dresser (top-mounted) Various grinding wheels and flanges included Weight: approx. 2,400 kg Required floor space: approx. 2,500 x 1,800 x 2,500 mm (height) Gjdpjwq Nc Nefx Agroiu The machine is located at our facility in 71334 Waiblingen-Beinstein and can of course be inspected. Please contact us for further details.

Kondisi: seperti baru (mesin pameran), Demo unit with under 20 operating hours // EXCELLENT CONDITION Gijdpfxencfd Rj Agrou System: Optiv M 6.6.4 multisensor coordinate measuring machine with Dual Z technology Probes and Sensors: - 10x CNC motorized zoom with digital color camera and 12-segment LED ring light - HPsS-X1H scanning sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1x M3) - M3 stylus kit for HP-S-X1C sensor - HR-X probe rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - 25 mm glass reference standard - 20 mm ring gauge Computer and Software: - PC-DMIS CAD++ measurement and analysis software - BEST machine control unit - Dell 27" monitor - Work table Optional Accessories: - Chromatic white light sensor (CWS) - CWS probe head 3 mm - Solara.MP12 - QS STAT 12 - O-QIS 12 Delivery, commissioning, and additional services upon request Upon request, the measuring device can be retrofitted from OptiCheck3D V 5.0

Tahun pembuatan: 2015, Kondisi: baru, shaft furnace clear internal height: 1100 mm clear internal diameter: 790 mm external diameter: 1560 mm external height (without lid): 1480 mm external height (with lid): 2300 mm electric heating: 40 kW Gisdpfx Aocdi D Djgreu circulation fan: 2.2 kW three-phase connection: 400 V, 50 Hz maximum temperature: 750°C

Kondisi: bekas, Tahun pembuatan: 2001, Technical details: X-axis travel: 2500 mm Y-axis travel: 1000 mm Z-axis travel: 750 mm Gsdpjvptmwefx Agroiu Table size: 3220 x 1000 mm Max. workpiece weight: approx. 3000 kg Spindle taper: ISO 50 Spindle speed range: 20 – 5,000 rpm Feed rate: 1 – 30,000 mm/min Rapid traverse: 30 m/min Total power requirement: 40 kW Floor space required (approx.): 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with CNC control HEIDENHAIN TNC 426 30-station automatic tool changer RENISHAW touch probe Coolant system with internal coolant supply (IKZ) and chip conveyor Various tool holders

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 3.000 h, jarak pergerakan sumbu X: 6.100 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 950 mm, CNC-Fräsmaschine mit Fahrständer – Komplett modernisiert durch REM (2021) Leistungsstarke und vielseitige Schwerlast-Fräsmaschine, 2021 von REM-Spezialisten vollständig auf den neuesten Stand gebracht mit moderner Heidenhain TNC 320 Steuerung. Sofort einsatzbereit für die Produktion. HAUPTDATEN: • X-Achse (Querweg): 6.000 mm • Y-Achse (Vertikalweg des Fräskopfes): 2.000 mm • Z-Achse (Längsweg des Schlittens): 950 mm Gjdpen D N H Tefx Agrsiu • Doppelfräskopf | Kopfdrehung: 360° • Spindeldrehzahl: 1.000 – 4.000 U/min • Spindelaufnahme: ISO 50 (automatische Spannungsfreigabe) • Kopfmaße: 290 × 290 mm • Spindelantriebsleistung: 15 kW (Gleichstrom) • Maschinengewicht: ca. 32 Tonnen • CNC-Steuerung: Heidenhain TNC 320 IHRE VORTEILE BEI REM: ✔ Maschine vollständig geprüft und im Einsatz getestet ✔ Moderne CNC-Nachrüstung – neue Elektrik, neue Antriebe ✔ Dokumentation und technischer Support verfügbar ✔ Weltweiter Export | Attraktive Versandkonditionen Ideal zur Bearbeitung schwerer Werkstücke in Luftfahrt, Energie und Schwerindustrie. Fordern Sie jetzt die vollständigen technischen Daten, Fotos und ein Vorführvideo an.